Maleic anhydride and acetylene plasma copolymer surfaces for SPR immunosensing

Comparison of single and double pulse laser-induced breakdown spectroscopy for the detection of biomolecules tagged with photon-upconversion nanoparticles

BACKGROUND

Laser-induced breakdown spectroscopy (LIBS) is a well-recognized analytical technique used for elemental analysis. This method is gaining considerable attention also in biological applications thanks to its ability for spatial mapping and elemental imaging. The implementation of LIBS in the biomedical field is based on the detection of metals or other elements that either naturally occur in the samples or are present artificially. The artificial implementation of nanoparticle labels (Tag-LIBS) enables the use of LIBS as a readout technique for immunochemical assays. However, one of the biggest challenges for LIBS to meet immunoassay readout standards is its sensitivity.

RESULTS

This paper focuses on the improvement of LIBS sensitivity for the readout of nanoparticle-based immunoassays. First, the LIBS setup was optimized on photon-upconversion nanoparticle (UCNP) droplets deposited on the microtiter plate wells. Two collection optics systems were compared, with single pulse (SP) and collinear double pulse (DP) LIBS arrangements. By deploying the second laser pulse, the sensitivity was improved up to 30 times. The optimized SP and DP setups were then employed for the indirect detection of human serum albumin based on immunoassay with UCNP-based labels. Compared to our previous LIBS study, the detection limit was enhanced by two orders of magnitude, from 10 ng mL-1 to 0.29 ng mL-1. In addition, two other immunochemical methods were used for reference, based on the readout of upconversion luminescence of UCNPs and absorbance measurement with enzyme labels. Finally, the selectivity of the assay was tested and the practical potential of Tag-LIBS was demonstrated by the successful analysis of urine samples.

SIGNIFICANCE AND NOVELTY

In this work, we improved the sensitivity of the Tag-LIBS method by combining new labels based on UCNPs with the improved collection optics and collinear DP configuration. In the instrumental setup optimization, the DP LIBS showed better sensitivity and signal-to-noise ratio than SP. The optimizations allowed the LIBS readout to surpass the sensitivity of enzyme immunoassay, approaching the qualities of upconversion luminescence readout, which is nowadays a state-of-the-art readout technique.

Plasma Co-Polymerization of HMDSO and Limonene with an Atmospheric Pressure Plasma Jet

Plasma co-polymers (co-p) were deposited with an atmospheric pressure plasma jet (APPJ) using a precursor mixture containing hexamethyldisiloxane (HMDSO) and limonene. A coating with fragments from both precursors and with siloxane, carbonyl and nitrogen functional groups was deposited. The flow rate of limonene was found to be an important parameter for plasma co-polymerization to tune the formation and structure of the functional groups. The FTIR and XPS analysis indicates that with increasing flow rate of limonene a higher proportion of carbon is bound to silicon. This is related to a stronger incorporation of fragments from limonene into the siloxane network and a weaker fragmentation of HMDSO. The formation mechanism of the nitroxide and carboxyl groups can be mainly differentiated into in-plasma and post-plasma reactions, respectively.

Recent Advancements in Receptor Layer Engineering for Applications in SPR-Based Immunodiagnostics

The rapid progress in the development of surface plasmon resonance-based immunosensing platforms offers wide application possibilities in medical diagnostics as a label-free alternative to enzyme immunoassays. The early diagnosis of diseases or metabolic changes through the detection of biomarkers in body fluids requires methods characterized by a very good sensitivity and selectivity. In the case of the SPR technique, as well as other surface-sensitive detection strategies, the quality of the transducer-immunoreceptor interphase is crucial for maintaining the analytical reliability of an assay. In this work, an overview of general approaches to the design of functional SPR-immunoassays is presented. It covers both immunosensors, the design of which utilizes well-known and often commercially available substrates, as well as the latest solutions developed in-house. Various approaches employing chemical and passive binding, affinity-based antibody immobilization, and the introduction of nanomaterial-based surfaces are discussed. The essence of their influence on the improvement of the main analytical parameters of a given immunosensor is explained. Particular attention is paid to solutions compatible with the latest trends in the development of label-free immunosensors, such as platforms dedicated to real-time monitoring in a quasi-continuous mode, the use of in situ-generated receptor layers (elimination of the regeneration step), and biosensors using recombinant and labelled protein receptors.

BIO bragg gratings on microfibers for label-free biosensing

Discovering nanoscale phenomena to sense biorecognition events introduces new perspectives to exploit nanoscience and nanotechnology for bioanalytical purposes. Here we present Bio Bragg Gratings (BBGs), a novel biosensing approach that consists of diffractive structures of protein bioreceptors patterned on the surface of optical waveguides, and tailored to transduce the magnitude of biorecognition assays into the intensity of single peaks in the reflection spectrum. This work addresses the design, fabrication, and optimization of this system by both theoretical and experimental studies to explore the fundamental physicochemical parameters involved. Functional biomolecular gratings are fabricated by microcontact printing on the surface of tapered optical microfibers, and their structural features were characterized. The transduction principle is experimentally demonstrated, and its quantitative bioanalytical prospects are assessed in a representative immunoassay, based on patterned protein probes and selective IgG targets, in label-free conditions. This biosensing system involves appealing perspectives to avoid unwanted signal contributions from non-specific binding, herein investigated in human serum samples. The work also proves how the optical response of the system can be easily tuned, and it provides insights into the relevance of this feature to conceive multiplexed BBG systems capable to perform multiple label-free biorecognition assays in a single device.

Bio-nanocomposite based highly sensitive and label-free electrochemical immunosensor for endometriosis diagnostics application

In this research, for the first time, a bio-nanocomposites based highly sensitive and label-free electrochemical immunosensor is reported with the aim of endometriosis diagnostics application. Multiwalled carbon nanotube and magnetite nanoparticle (MWCNT-Fe₃O₄) was dispersed in chitosan (CS) to fabricate a bio-nanocomposite to immobilize very monoclonal specific antibody (via cross-linking using glutaraldehyde) for selective electrochemical immuno-sensing of carbohydrate antigen 19-9 (CA19-9), a potential biomarker for endometriosis diagnostics. Well-characterized Anti-Abs_CA19-9/CS-MWCNT-Fe₃O₄ immune-electrode fabricated on glassy carbon electrode (GCE) successfully detect CA 19-9 and exhibited a high sensitivity as (2.55 µA pg^-1 cm^-1), a detection limit of 0.163 pg mL^-1, detection range from 1.0 pg mL^-1 to 100 ng mL^-1. Our fabricated electrochemical Abs_CA19-9/CS-MWCNT-Fe₃O₄ immunosensor performed CA19-9 sensing in physiological range and at a very level which suggest it application for early-stage diagnostics, diseases monitoring, and optimization of therapy. To claim the clinical application, our sensor was tested using real samples and sensing performance was validated using enzyme-linked immune-sorbent assay (ELISA). The results of the studies projected Abs_CA19-9/CS-MWCNT-Fe₃O₄ electrochemical CA19-9 immunosensor as a potential and affordable alternate of conventional techniques like ELISA. We believe that our fabricated sensor can be the plane of a disease's management program due to affordable, rapid, label-free, and sensitive detection of a targeted biomarker.

Application of Molecularly Imprinted Polymer-modified Potentiometric Sensor for Quantitative Determination of Histamine in Serum

A molecularly imprinted polymer-modified potentiometric histamine (HIS) sensor was prepared and used for quantitative determination of HIS in bovine serum. The calibration curve using the potential responses measured in 1 × 10-3 mol L-1 phosphate buffer (pH 7.4) showed good linearity in the HIS concentration range of 3 × 10-4 to 1 × 10-2 mol L-1 (r = 0.92), with a detection limit of 1.6 × 10-4 mol L-1. In bovine serum samples, the HIS sensor showed good recovery values of 91 - 104%. Therefore, this HIS sensor successfully determined the HIS concentration in bovine serum samples.

Detection of a novel glycodelin biomarker using electrochemical immunosensor for endometriosis

Endometriosis is one of the important issues in women worldwide, which decreases the quality of women's lives in their reproductive age. The diagnosis of endometriosis is carried out by the invasive procedure, which is expensive and painful. In the last few decades, researchers have given more attention to constructing a suitable biomarker-based biosensor for semi/non-invasive diagnosis of endometriosis. As a result, glycodelin (GLY) was found as a promising biomarker because of its selectivity and sensitivity. To the best of our knowledge, it was the first study that reported the detection of GLY biomarker using an electrochemical immunosensor. Briefly, a label-free electrochemical immunosensing platform was constructed through in-situ surface modification of cysteamine layer and immobilisation of antibody (anti-GLY) with help of glutaraldehyde. The interaction between antigen and antibody was measured using square wave voltammetry (SWV). The SWV signal could decrease proportionally with the increasing GLY concentration ranging from 1 to 1000 ng mL^-1 (R² = 0.9981) and a detection limit (LOD) of 0.43 ng mL^-1. Moreover, an immunosensor could exhibit high sensitivity, selectivity, long-term stability, reproducibility and regeneration. Accuracy of the immunosensor was compared with enzyme-linked immunosorbent assay (ELISA), and satisfying results were obtained. The detection of GLY biomarker may be a new possibility for endometriosis diagnosis.

Stability of oxygen-rich plasma-polymerized coatings in aqueous environment

In this work, we report on the stability of oxygen-rich plasma-polymerized (pp) films in an aqueous environment. The pp films were deposited via atmospheric-pressure plasma jet treatment of polymerizable organic liquids. The monomers used for the plasma-assisted polymerization were tetrahydrofurfuryl methacrylate, 1,2,4-trivinylcyclohexane, and mixtures thereof. The pp films were deposited at different plasma input powers ranging from 3 to 7 W. The stability of the obtained pp films was studied upon long-time storage in pure water and in buffer solutions of pHs 4, 7, and 10. After 24 h of storage of the pp films in de-ionized water, all of the studied pp films experienced thickness losses along with the formation of various ringlike structures at their surface, whereas Fourier transformed infrared (FT-IR) analysis showed no changes in their chemical composition. The pp films stored in pH 10 were completely delaminated from the substrate surface, while the pp films stored for 24 h in pH 4 showed swelling behavior, partial delamination, and the formation of wrinkles at the coatings' surface. The pp films stored for 24 h in pH 7 experienced minor thickness losses and formation of wrinkles at their surface. FT-IR analysis of the pp films stored in buffer solutions of pH 4 and pH 7 showed a decrease of C=O and an increase of O-H stretching signals in all of the cases. The observed chemical changes corresponded to the hydrolysis of esters presented in the pp films' structure.

Versatile Bioconjugation Strategies of PEG-Modified Upconversion Nanoparticles for Bioanalytical Applications

Lanthanide-doped upconversion nanoparticles (UCNPs) display highly beneficial photophysical features for background-free bioimaging and bioanalysis; however, they are instable in high ionic strength buffers, have no functional groups, and are nonspecifically interacting. Here, we have prepared NIR-excitable UCNPs that are long-term colloidally stable in buffered media and possess functional groups. Heterobifunctional poly(ethylene glycol) (PEG) linkers bearing neridronate and alkyne or maleimide were attached to UCNPs via a ligand exchange. Streptavidin (SA)-conjugates were prepared by click reaction of UCNP@PEG-alkyne and SA-azide. Antihuman serum albumin pAbF antibody was modified with azide groups and conjugated to UCNP@PEG-alkyne via click reaction; alternatively, the antibody, after mild reduction of its disulfide bonds, was conjugated to UCNP@PEG-maleimide. We employed these nanoconjugates as labels for an upconversion-linked immunosorbent assay. SA-based labels achieved the lowest LOD of 0.17 ng/mL for the target albumin, which was superior compared to a fluorescence immunoassay (LOD 0.59 ng/mL) or an enzyme-linked immunoassay (LOD 0.56 ng/mL).

Functional Plasma Polymerized Surfaces for Biosensing

The capabilities of biosensors for fast, economic, and user-friendly analysis of complex samples has led to the exploitation of analytical devices for detection, quantification, and monitoring of specific chemical species for various applications. For a sufficiently high surface reactivity toward the adopted bioreceptors, a thin functional layer is required to enable coupling of the target biomolecules and to provide good stability in the presence of a sample matrix. In this work, the generation of water-stable oxygen-rich plasma polymerized (pp) films deposited by atmospheric-pressure jet plasma for reliable immobilization of biomolecules is presented. Three types of pp films were developed and characterized. All of the obtained pp films were successfully used as a matrix layer in the SPR immunosensors, which provided excellent level of sensitivity, stability, and regenerability. The achieved results show that atmospheric pressure plasma-induced polymerization is a powerful alternative method for the preparation of matrix layers for a wide range of applications in the biological field.