Rapid detection of trace Salmonella in milk and chicken by immunomagnetic separation in combination with a chemiluminescence microparticle immunoassay

Magnetic capture device for large volume sample analysis

Immunomagnetic separation (IMS) techniques employing superparamagnetic particles can successfully isolate various components from mixtures. However, their utility can be limited for large-volume samples, viscous samples, or those containing a high density of particulate matter because of the need to generate high field gradients for particle recovery. Therefore, a new class of immunomagnetic particles was devised utilizing a single, macroscopic Pyrex spinbar conjugated with biorecognition elements to address these limitations. Advantages include an inherent capacity for effective mixing, an almost instantaneous recovery of the spinbar that can be performed without expensive equipment and with no loss of magnetic particles during processing, and reduced transfer of sample matrix. As a result, spinbars can provide an effective means for IMS with large-volume assays composed of complex matrices.

APHRODITE: A Compact Lab-on-Chip Biosensor for the Real-Time Analysis of Salivary Biomarkers in Space Missions

One of the main challenges to be faced in deep space missions is to protect the health and ensure the maximum efficiency of the crew by preparing methods of prevention and in situ diagnosis. Indeed, the hostile environment causes important health problems, ranging from muscle atrophy, osteopenia, and immunological and metabolic alterations due to microgravity, to an increased risk of cancer caused by exposure to radiation. It is, therefore, necessary to provide new methods for the real-time measurement of biomarkers suitable for deepening our knowledge of the effects of space flight on the balance of the immune system and for allowing the monitoring of the astronaut's health during long-term missions. APHRODITE will enable human space exploration because it fills this void that affects both missions in LEO and future missions to the Moon and Mars. Its scientific objectives are the design, production, testing, and in-orbit demonstration of a compact, reusable, and reconfigurable system for performing the real-time analysis of oral fluid samples in manned space missions. In the frame of this project, a crew member onboard the ISS will employ APHRODITE to measure the selected target analytes, cortisol, and dehydroepiandrosterone sulfate (DHEA-S), in oral fluid, in four (plus one additional desired session) separate experiment sessions. The paper addresses the design of the main subsystems of the analytical device and the preliminary results obtained during the first implementations of the device subsystems and testing measurements on Earth. In particular, the system design and the experiment data output of the lab-on-chip photosensors and of the front-end readout electronics are reported in detail along with preliminary chemical tests for the duplex competitive CL-immunoassay for the simultaneous detection of cortisol and DHEA-S. Different applications also on Earth are envisaged for the APHRODITE device, as it will be suitable for point-of-care testing applications (e.g., emergency medicine, bioterrorism, diagnostics in developing countries, etc.).

Rapid and simultaneous multiepitope antigen-based detection of Enterococcus by microscale thermophoresis and immunomagnetic separation

Background

Generally, enterococci bacteria cause nosocomial infections and are major indicators of bacterial contamination in marine bathing beach. However, a method for the rapid and simultaneous detection of multiple pathogenic enterococci has not been developed on account of the wide variety of pathogenic enterococci and their existence in complex matrices.

Methods

Immunoinformatics tools were used to design a multi-epitope antigen for the detection of various pathogenic enterococci by using the sequence of dltD gene on enterococci lipoteichoic acid (LTA) surface, which is associated with toxicological effects. The multi-epitopes included enterococci such as Enterococcus faecalis, E. gallinarum, E. raffinosus, E. durans, E. faecium, E. hirae, E. thailandicus, E. casseliflavus, E. avium, E. mundtii, E. lactis, E. solitarius, E. pseudoavium, and E. malodoratum. Microscale thermophoresis (MST) and western blot were carried out to detect the affinity between multi-epitope antigens and antibodies and between multi-epitope antibodies and bacteria. Furthermore, the detection of pathogenic enterococci was carried out by using immunomagnetic beads (IMBs) and immune chromatographic test strip (ICTS).

Results

The multi-epitope antibody had a satisfactory affinity to the antigen and enterococci. IMBs and ICTS were detected with a minimum of 101 CFU/mL and showed incompatibility for Vibrio parahemolyticus, V. vulnifcus, V. harveyi, V. anguillarum, and Edwardsiella tarda.

Implication

The present study demonstrated that the multi-epitope antigens exhibited excellent specificity and sensitivity, making them highly suitable for efficient on-site screening of enterococci bacteria in marine bathing beaches.

Joint concanavalin A-aptamer enabled dual recognition for anti-interference visual detection of Salmonella typhimurium in complex food matrices

Given that food poisoning and infectious diseases caused by Salmonella typhimurium (S. typhimurium) draw intensive public health concerns, developing rapid, accurate, and cost-effective approaches to detect the pathogen is of crucial importance. Herein, we proposed a concanavalin A (Con A)-aptamer joint strategy to realize dual recognition for the strongly specific, visual, and highly sensitive determination of S. typhimurium. Compared with currently used single identification strategies, Con A and aptamer could recognize different sites of S. typhimurium to enhance the utilization rate of these sites for better sensing. The developed assay offered specific detection of S. typhimurium against other bacteria in a remarkably wide concentration range of 7.0 × 10¹ ∼ 7.0 × 10⁹ CFU/mL, along with a detection limit as low as 23 CFU/mL. Real sample analyses of milk and pork demonstrated the excellent reliability and practicability of our assay, providing great potential for food safety analysis.

Nanotechnology Applications in Sepsis: Essential Knowledge for Clinicians

Sepsis is a life-threatening condition caused by a dysregulated host response to an invading pathogen such as multidrug-resistant bacteria. Despite recent advancements, sepsis is a leading cause of morbidity and mortality, resulting in a significant global impact and burden. This condition affects all age groups, with clinical outcomes mainly depending on a timely diagnosis and appropriate early therapeutic intervention. Because of the unique features of nanosized systems, there is a growing interest in developing and designing novel solutions. Nanoscale-engineered materials allow a targeted and controlled release of bioactive agents, resulting in improved efficacy with minimal side effects. Additionally, nanoparticle-based sensors provide a quicker and more reliable alternative to conventional diagnostic methods for identifying infection and organ dysfunction. Despite recent advancements, fundamental nanotechnology principles are often presented in technical formats that presuppose advanced chemistry, physics, and engineering knowledge. Consequently, clinicians may not grasp the underlying science, hindering interdisciplinary collaborations and successful translation from bench to bedside. In this review, we abridge some of the most recent and most promising nanotechnology-based solutions for sepsis diagnosis and management using an intelligible format to stimulate a seamless collaboration between engineers, scientists, and clinicians.

Preparation of polyclonal antibody against a universal bacterial antigen OmpA deduced by bioinformatic analysis and preliminary evaluation of concentration effects on foodborne pathogens

Rapid and ultrasensitive microbial detection in actual samples have challenges because of target pathogen diversity and low abundance. In this study, we attempted to capture and concentrate multiple pathogens by combining magnetic beads with polyclonal antibodies against a universal antigen of ompA, LAMOA-1, before further detection. A protein sequence consisting of 241 amino acids with spatial conformation similar to E. coli ompA was identified and expressed as a recombinant protein in prokaryotes according to the results of sequence alignment among 432 sequences of ompA belonging to intestinal bacteria from gram-negative bacteria. Purified from immunized rabbits, the anti-LAMOA-1 antibody was shown to effectively recognize 12 foodborne bacterial species. Antibody-conjugated beads were used to concentrate the bacteria when the bacterial concentration in artificially contaminated samples is between 10 and 100 CFU/mL, which shortens detection duration by 8-24 h. The enrichment strategy is potentially beneficial for detection of foodborne pathogens.

Rapid Detection of Staphylococcus aureus in Milk and Pork via Immunomagnetic Separation and Recombinase Polymerase Amplification

Separation processes using immunomagnetic beads (IMBs) are advantageous for the rapid detection of Staphylococcus aureus (S. aureus). Herein, a novel method, based on immunomagnetic separation using IMBs and recombinase polymerase amplification (RPA), was employed to detect S. aureus strains in milk and pork. IMBs were formed by the carbon diimide method using rabbit anti-S. aureus polyclonal antibodies and superparamagnetic carboxyl-Fe3O4 MBs. The average capture efficiency for 2.5 to 2.5 × 105 (CFU)/mL gradient dilution of S. aureus with 6 mg of IMBs within 60 min were a range of 62.74 to 92.75%. The detection sensitivity of the IMBs-RPA method in artificially contaminated samples was 2.5 × 101 CFU/mL. The entire detection process was completed within 2.5 h, including bacteria capture, DNA extraction, amplification, and electrophoresis. Among 20 actual samples, one case of raw milk sample and two cases of pork samples were tested positive using the established IMBs-RPA method, which were verified by the standard S. aureus inspection procedure. Therefore, the novel method shows potential for food safety supervision owing to its short detection time, higher sensitivity, and high specificity. IMPORTANCE Our study established IMBs-RPA method, which simplified the steps of bacteria separation, shortened the detection time, and realized the convenient detection of S. aureus in milk and pork samples. IMBs-RPA method was also suitable for the detection of other pathogens, providing a new method for food safety monitoring and a favorable basis for rapid and early diagnosis of diseases.

Recent advances in microchip electrophoresis for analysis of pathogenic bacteria and viruses

Life-threatening diseases, such as hepatitis B, pneumonia, tuberculosis, and COVID-19, are widespread due to pathogenic bacteria and viruses. Therefore, the development of highly sensitive, rapid, portable, cost-effective, and selective methods for the analysis of such microorganisms is a great challenge. Microchip electrophoresis (ME) has been widely used in recent years for the analysis of bacterial and viral pathogens in biological and environmental samples owing to its portability, simplicity, cost-effectiveness, and rapid analysis. However, microbial enrichment and purification are critical steps for accurate and sensitive analysis of pathogenic bacteria and viruses in complex matrices. Therefore, we first discussed the advances in the sample preparation technologies associated with the accurate analysis of such microorganisms, especially the on-chip microfluidic-based sample preparations such as dielectrophoresis and microfluidic membrane filtration. Thereafter, we focused on the recent advances in the lab-on-a-chip electrophoretic analysis of pathogenic bacteria and viruses in different complex matrices. As the microbial analysis is mainly based on the analysis of nucleic acid of the microorganism, the integration of nucleic acid-based amplification techniques such as polymerase chain reaction (PCR), quantitative PCR, and multiplex PCR with ME will result in an accurate and sensitive analysis of microbial pathogens. Such analyses are very important for the point-of-care diagnosis of various infectious diseases.

Advances, applications, and limitations of portable and rapid detection technologies for routinely encountered foodborne pathogens

Traditional foodborne pathogen detection methods are highly dependent on pre-treatment of samples and selective microbiological plating to reliably screen target microorganisms. Inherent limitations of conventional methods include longer turnaround time and high costs, use of bulky equipment, and the need for trained staff in centralized laboratory settings. Researchers have developed stable, reliable, sensitive, and selective, rapid foodborne pathogens detection assays to work around these limitations. Recent advances in rapid diagnostic technologies have shifted to on-site testing, which offers flexibility and ease-of-use, a significant improvement from traditional methods' rigid and cumbersome steps. This comprehensive review aims to thoroughly discuss the recent advances, applications, and limitations of portable and rapid biosensors for routinely encountered foodborne pathogens. It discusses the major differences between biosensing systems based on the molecular interactions of target analytes and biorecognition agents. Though detection limits and costs still need further improvement, reviewed technologies have high potential to assist the food industry in the on-site detection of biological hazards such as foodborne pathogens and toxins to maintain safe and healthy foods. Finally, this review offers targeted recommendations for future development and commercialization of diagnostic technologies specifically for emerging and re-emerging foodborne pathogens.

Rapid and visual detection of Staphylococcus aureus in milk using a recombinase polymerase amplification-lateral flow assay combined with immunomagnetic separation

AIMS

The aim of this study was to develop a novel approach using lateral flow recombinase polymerase amplification (RPA-LF) combined with immunomagnetic separation (IMS) for the rapid detection of Staphylococcus aureus in milk.

METHODS AND RESULTS

Under optimum conditions, the average capture efficiency values (CEs) for S. aureus strains (10⁴ CFU ml^-1 ) was above 95.0% in PBST and ~80% in milk within 45 min with 0.7 mg immunomagnetic beads. The RPA-LF assay, which comprised DNA amplification via RPA at 39°C for 10 min and visualization of the amplicons through LF strips for 5 min, detected S. aureus within 15 min. The method only detected S. aureus and did not show cross-reaction with other bacteria, exhibiting a high level of specificity. Sensitivity experiments confirmed a detection limit of RPA-LF assay as low as 600 fg reaction^-1 for the S. aureus genome (corresponding to approximately 36 CFU of S. aureus), which was about 16.7-fold more sensitive than that of the conventional PCR method. When RPA-LF was used in combination with IMS to detect S. aureus inoculated into artificially contaminated milk, it exhibited a detection limit of approximately 40 CFU reaction^-1 .

CONCLUSIONS

The newly developed IMS-RPA-LF method enabled detection of S. aureus at levels as low as 40 CFU reaction^-1 in milk samples without culture enrichment for an overall testing time of only 70 min.

SIGNIFICANCE AND IMPACT OF THE STUDY

The newly developed IMS-RPA-LF assay effectively combines sample preparation, amplification, and detection into a single platform. Because of its high sensitivity, specificity, and speed, the IMS-RPA-LF assay will have important implications for the rapid detection of S. aureus in contaminated food.

Vancomycin-conjugated polydopamine-coated magnetic nanoparticles for molecular diagnostics of Gram-positive bacteria in whole blood

BACKGROUND

Sepsis is caused mainly by infection in the blood with a broad range of bacterial species. It can be diagnosed by molecular diagnostics once compounds in the blood that interfere with molecular diagnostics are removed. However, this removal relies on ultracentrifugation. Immunomagnetic separation (IMS), which typically uses antibody-conjugated silica-coated magnetic nanoparticles (Ab-SiO2-MNPs), has been widely applied to isolate specific pathogens in various types of samples, such as food and environmental samples. However, its direct use in blood samples containing bacteria is limited due to the aggregation of SiO2-MNPs in the blood and inability to isolate multiple species of bacteria causing sepsis.

RESULTS

In this study, we report the synthesis of vancomycin-conjugated polydopamine-coated (van-PDA-MNPs) enabling preconcentration of multiple bacterial species from blood without aggregation. The presence of PDA and van on MNPs was verified using transmission electron microscopy, X-ray photoelectron spectroscopy, and energy disruptive spectroscopy. Unlike van-SiO2-MNPs, van-PDA-MNPs did not aggregate in the blood. Van-PDA-MNPs were able to preconcentrate several species of Gram-positive bacteria in the blood, lowering the limit of detection (LOD) to 10 colony forming units/mL by polymerase chain reaction (PCR) and quantitative PCR (qPCR). This is 10 times more sensitive than the LOD obtained by PCR and qPCR using van-SiO2-MNPs.

CONCLUSION

These results suggest that PDA-MNPs can avoid aggregation in blood and be conjugated with receptors, thereby improving the sensitivity of molecular diagnostics of bacteria in blood samples.

2D nanomaterial sensing array using machine learning for differential profiling of pathogenic microbial taxonomic identification

An integrated custom cross-response sensing array has been developed combining the algorithm module’s visible machine learning approach for rapid and accurate pathogenic microbial taxonomic identification. The diversified cross-response sensing array consists of two-dimensional nanomaterial (2D-n) with fluorescently labeled single-stranded DNA (ssDNA) as sensing elements to extract a set of differential response profiles for each pathogenic microorganism. By altering the 2D-n and different ssDNA with different sequences, we can form multiple sensing elements. While interacting with microorganisms, the competition between ssDNA and 2D-n leads to the release of ssDNA from 2D-n. The signals are generated from binding force driven by the exfoliation of either ssDNA or 2D-n from the microorganisms. Thus, the signal is distinguished from different ssDNA and 2D-n combinations, differentiating the extracted information and visualizing the recognition process. Fluorescent signals collected from each sensing element at the wavelength around 520 nm are applied to generate a fingerprint. As a proof of concept, we demonstrate that a six-sensing array enables rapid and accurate pathogenic microbial taxonomic identification, including the drug-resistant microorganisms, under a data size of n = 288. We precisely identify microbial with an overall accuracy of 97.9%, which overcomes the big data dependence for identifying recurrent patterns in conventional methods. For each microorganism, the detection concentration is 10⁵ ~ 10⁸ CFU/mL for Escherichia coli, 10² ~ 10⁷ CFU/mL for E. coli-β, 10³ ~ 10⁸ CFU/mL for Staphylococcus aureus, 10³ ~ 10⁷ CFU/mL for MRSA, 10² ~ 10⁸ CFU/mL for Pseudomonas aeruginosa, 10³ ~ 10⁸ CFU/mL for Enterococcus faecalis, 10² ~ 10⁸ CFU/mL for Klebsiella pneumoniae, and 10³ ~ 10⁸ CFU/mL for Candida albicans. Combining the visible machine learning approach, this sensing array provides strategies for precision pathogenic microbial taxonomic identification.

Rapid and multiplexed quantification of Salmonella, Escherichia coli O157:H7, and Shigella flexneri in ground beef using flow cytometry

Salmonella, Escherichia coli O157:H7 (E. coli O157:H7) and Shigella flexneri (S. flexneri) might contaminate similar types of meat products and cause deadly diseases in humans. In reality, ground beef samples may carry more than one pathogen and a rapid and accurate detection method for the simultaneous identification of multiple specific pathogenic strains in ground beef is crucial. In this study, a sample pretreatment protocol and a flow cytometry method were developed for rapid and multiplexed quantification of the three pathogens without cultural enrichment in ground beef. The whole process of sample pretreatment, staining, and instrument analysis can be accomplished within 1 h. The three bacteria upon sample pretreatment were demonstrated good recoveries (93.8%-101.2%). The quantitative detection range of the mothed was 10³ to 10⁸ cells/g for all three pathogens, and the detection limit for Salmonella, E. coli O157:H7 and S. flexneri in ground beef were 3.1 × 10³ cells/g, 2.1 × 10³ cells/g and 2.3 × 10³ cells/g, respectively. Therefore, the as-developed approach is a rapid and quantitative method for multiplexed detection of Salmonella, E. coli O157:H7, and S. flexneri in ground beef.

Mixing during Trapping Enabled a Continuous-Flow Microfluidic Smartphone Immunoassay Using Acoustic Streaming

Smartphone-enabled microfluidic chemiluminescence immunoassay is a promising portable system for point-of-care (POC) biosensing applications. However, due to the rather faint emitted light in such a limited sample volume, it is still difficult to reach the clinically accepted range when the smartphone serves as a standalone detector. Besides, the multiple separation and washing steps during sample preparation hinder the immunoassay's applications for POC usage. Herein, we proposed a novel acoustic streaming tweezers-enabled microfluidic immunoassay, where the probe particles' purification, reaction, and sensing were simply achieved on the same chip at continuous-flow conditions. The dedicatedly designed high-speed microscale vortexes not only enable dynamic trapping and washing of the probe particles on-demand but also enhance the capture efficiency of the heterogeneous particle-based immunoassay through active mixing during trapping. The enriched probe particles and enhanced biomarker capture capability increase the local chemiluminescent light intensity and enable direct capture of the immunobinding signal by a regular smartphone camera. The system was tested for prostate-specific antigen (PSA) sensing both in buffer and serum, where a limit of detection of 0.2 ng/mL and a large dynamic response range from 0.3 to 10 ng/mL using only 10 μL of sample were achieved in a total assay time of less than 15 min. With the advantages of on-chip integration of sample preparation and detection and high sensing performance, the developed POC platform could be applied for many on-site diagnosis applications.

A novel smartphone-based colorimetric aptasensor for on-site detection of Escherichia coli O157:H7 in milk

Effective testing tools for Escherichia coli O157:H7 can prevent outbreaks of foodborne illness. In this paper, a smartphone-based colorimetric aptasensor was developed using functionalized gold nanoparticles (GNP) and multi-walled carbon nanotubes (MWCNT) for monitoring E. coli O157:H7 in milk. The maximum absorption peak of GNP bonded with aptamer (Apt) generated evident transformation from 518 to 524 nm. The excess GNP-Apt was removed by functionalized MWCNT magnetized with carbonyl iron powder (CIP) and hybridized with a DNA probe, whereas the GNP-Apt immobilized on E. coli O157:H7 remained in the system. In the presence of a high-salt solution, the GNP-Apt that captured E. coli O157:H7 remained red, but the free GNP-Apt aggregated and appeared blue. The chromogenic results were analyzed by a smartphone-based colorimetric device that was fabricated using acrylic plates, a light-emitting diode, and a mobile power pack. To our knowledge, this was the first attempt to use a smartphone-based colorimetric aptasensor employing the capture of GNP-Apt coupled with separation of MWCNT@CIP probe to detect E. coli O157:H7. The aptasensor exhibited good reproducibility and no cross-reaction for other bacteria. A concentration of 8.43 × 10³ cfu/mL of E. coli O157:H7 could be tested in pure culture, and 5.24 × 10² cfu/mL of E. coli O157:H7 could be detected in artificially contaminated milk after 1 h of incubation. Therefore, the smartphone-based colorimetric aptasensor was an efficient tool for the detection of E. coli O157:H7 in milk.

Quantitative detection of trace VBNC Cronobacter sakazakii by immunomagnetic separation in combination with PMAxx-ddPCR in dairy products

One immunomagnetic separation (IMS) assay based on immunomagnetic beads (IMBs) has been evaluated as a potential pretreatment tool for the separation and enrichment of target bacteria. In this study, we successfully immobilized antibodies onto magnetic bead surfaces to form IMBs through biotin and a streptavidin (SA) system to capture viable but nonculturable (VBNC) Cronobacter sakazakii (C. sakazakii) from dairy products. Various parameters that affected the capture efficiency (CE) of IMS, including the number of antibodies, IMBs dose, incubation time, magnetic separation time, and immunoreaction temperature, were systematically investigated. We further determined the optimal enrichment conditions for different dairy substrates to ensure maximum enrichment of target pathogens in the system. An IMS technique combining improved propidium monoazide (PMAxx) and droplet digital PCR (ddPCR) was established to detect the pathogenic VBNC C. sakazakii. The IMS-PMAxx-ddPCR method after IMBs enrichment showed higher accuracy when the VBNC C. sakazakii was under 1 Log₁₀ copies/g. The detection limit for this method in a background of powdered infant formula (PIF) was 5.6 copies/g. In summary, the developed IMS-PMAxx-ddPCR method has great potential for the analysis and detection of VBNC bacteria in food.

Sensitive detection of foodborne pathogens based on CRISPR-Cas13a

Salmonella, being one of the most widespread foodborne pathogens, is a compulsory test item required by national food safety standard of China and many other countries. More sensitive and specific Salmonella detection method is still needed since traditional methods are time consuming and highly dependent on enormous manpower and material resources. In this research, a bacteria detection method based on CRISPR-Cas13a system (where CRISPR is Clustered Regularly Interspaced Short Palindromic Repeats) was proposed. The target DNA was amplified by PCR and transcribed into RNA by T7 transcriptase, which can activate the RNase activity of the Cas13a protein. The self-folding quenched fluorescent probe can be cleaved by the activated Cas13a protein to generate fluorescent signal. We named this method as PCF detection (PCR-CRISPR-Fluorescence based nucleic acid detection). In this study, PCF detection showed excellent sensitivity, which can detect Salmonella genomic DNA with a minimum of 10¹ aM or 10° CFU/ml Salmonella bacteria in 2 hr. It also showed good specificity with no cross-reaction with other common foodborne bacteria. PRACTICAL APPLICATION: The PCF detection method proposed in this article can detect Salmonella sensitively and specifically, providing a novel strategy for the detection of foodborne pathogens in food and has great application potential in other microbial detection fields.

Gold nanoparticle-based immunochromatographic assay for detection Pseudomonas aeruginosa in water and food samples

•

An ICA was developed for P. aeruginosa detection.

•

The ICA strip showed a limit of detection of 2.41 × 10⁴ CFU/mL.

•

The ICA could be applied to detect P. aeruginosa in water and food samples.

Pseudomonas aeruginosa (P. aeruginosa) is the common infection-causing bacterial pathogen. Conventional methods for the detection of P. aeruginosa are time-consuming, and therefore, a more rapid analytical method is required. Here, monoclonal antibodies (Mabs) against P. aeruginosa (CICC 10419) were prepared and based on paired Mabs, an immunochromatographic assay (ICA) was developed. The ICA strip showed a limit of detection of 2.41 × 10⁴ CFU/mL and the linear range of detection was 3.13 × 10⁴-1.0 × 10⁶ CFU/mL. No cross-reactivity was observed when other common Gram-negative and Gram-positive bacteria were used. The analytical performance of the ICA strip indicated that the developed ICA had good specificity and stability. Moreover, the feasibility of the ICA strip was verified by detecting P. aeruginosa (CICC 10419) in spiked water and food samples. The ICA strip could detect samples contaminated with a low-level of P. aeruginosa (CICC 10419) after 8 h enrichment.

Development and perspectives of rapid detection technology in food and environment

Food safety become a hot issue currently with globalization of food trade and food supply chains. Chemical pollution, microbial contamination and adulteration in food have attracted more attention worldwide. Contamination with antibiotics, estrogens and heavy metals in water environment and soil environment have also turn into an enormous threat to food safety. Traditional small-scale, long-term detection technologies have been unable to meet the current needs. In the monitoring process, rapid, convenient, accurate analysis and detection technologies have become the future development trend. We critically synthesizing the current knowledge of various rapid detection technology, and briefly touched upon the problem which still exist in research process. The review showed that the application of novel materials promotes the development of rapid detection technology, high-throughput and portability would be popular study directions in the future. Of course, the ultimate aim of the research is how to industrialization these technologies and apply to the market.

Immunomagnetic separation: An effective pretreatment technology for isolation and enrichment in food microorganisms detection

The high efficiency and accurate detection of foodborne pathogens and spoilage microorganisms in food are a task of great social, economic, and public health importance. However, the contamination levels of target bacteria in food samples are very low. Owing to the background interference of food ingredients and negative impact of nontarget flora, the establishment of efficient pretreatment techniques is very crucial for the detection of food microorganisms. With the significant advantages of high specificity and great separation efficiency, immunomagnetic separation (IMS) assay based on immunomagnetic particles (IMPs) has been considered as a powerful system for the separation and enrichment of target bacteria. This paper mainly focuses on the development of IMS as well as their application in food microorganisms detection. First, the basic principle of IMS in the concentration of food bacteria is presented. Second, the effect of different factors, including the sizes of magnetic particles (MPs), immobilization of antibody and operation parameters (the molar ratio of antibody to MPs, the amount of IMPs, incubation time, and bacteria concentration) on the immunocapture efficiency of IMPs are discussed. The performance of IMPs in different food samples is also evaluated. Finally, the combination of IMS and various kinds of detection methods (immunology-based methods, nucleic acid-based methods, fluorescence methods, and biosensors) to detect pathogenic and spoilage organisms is summarized. The challenges and future trends of IMS are also proposed. As an effective pretreatment technique, IMS can improve the detection sensitivity and shorten their testing time, thus exhibiting broad prospect in the field of food bacteria detection.

Detection of E. coli O157:H7 in Food Using Automated Immunomagnetic Separation Combined with Real-Time PCR

In this study, we describe the development of an automated immunomagnetic separation device combined with real-time polymerase chain reaction (PCR) for detecting foodborne bacteria. Immunomagnetic separation (IMS) is a well-known method for the separation and concentration of target bacteria from a large volume of food samples. Magnetic beads functionalized with an antibody provide selectivity for target bacteria such as Escherichia coli O157:H7. Moreover, compared to conventional methods, real-time PCR enables high-sensitivity detection of target bacteria. The method proposed in this study involves three steps: (1) pre-enrichment, (2) automated IMS and concentration of target bacteria, and (3) detection of target bacteria by real-time PCR. Using food samples with a working sample volume as large as 250 mL, the whole process only requires 3 h. As a result, target bacteria in the range of 101–102 colony-forming units per mg or g of sample can be detected in food samples, such as milk, ground beef, and cabbage, by using the proposed approach. We anticipate that the automated IMS system combined with real-time PCR will contribute to the development of a fully automated system for detecting foodborne bacteria and serve as a multi-tester for a variety of bacterial strains in the capacity of a sample-to-answer device in the near future.

Recent methods and biosensors for foodborne pathogen detection in fish: progress and future prospects to sustainable aquaculture systems

The aquaculture industry has advanced toward sustainable recirculating systems, in where parameters of food quality are strictly monitored. Despite that, as in the case of conventional aquaculture practices, the recirculating systems also suffer threats from Aeromonas spp., Vibrio spp., Streptococcus spp., among other foodborne pathogens infecting farmed fish. The aquaculture pathogens are routinely detected by conventional PCR methods or antibody-based tests, with the detection protocols confined to laboratory use. Emerging assay technologies and biosensors recently reported in the literature open new opportunities to the development of sensitive, specific, and portable analytical devices to use in the field. Techniques of DNA/RNA analysis, immunoassays and other nanomolecular technologies have been facing important advances in response time, sensitivity, and enhanced power of discrimination among and within species. Moreover, the recent developments of electrochemical and optical signal transduction have facilitated the incorporation of the innovative assays to practical miniaturized devices. In this work, it is provided a critical review over foodborne pathogen detection by existing and promising methods and biosensors applied to fish samples and extended to other food matrices. While isothermal DNA/RNA amplification methods can be highlighted among the assay methods for their promising analytical performance and suitability for point-of-care testing, the electrochemical transduction provides a way to achieve cost-effective biosensors amenable to use in the aquaculture field. The adoption of new methods and biosensors would constitute a step forward in securing sustainable aquaculture systems.

Rapid detection of Escherichia coli using bacteriophage-induced lysis and image analysis

Rapid detection of bacterial pathogens is a critical unmet need for both food and environmental samples such as irrigation water. As a part of the Food safety Modernization Act (FSMA), The Produce Safety rule has established several requirements for testing for the presence of generic Escherichia coli in water, but the current method available for testing (EPA M1603) demands specified multiple colony verification and highly trained personnel to perform these tests. The purpose of the study was to assess a phage induced bacterial lysis using quantitative image analysis to achieve rapid detection of E. coli at low concentrations within 8 hours. This study aimed to develop a simple yet highly sensitive and specific approach to detect target bacteria in complex matrices. In the study, E. coli cells were first enriched in tryptic soy broth (TSB), followed by T7 phage induced lysis, concentration, staining and fluorescent imaging. Image analysis was conducted including image pre-processing, image segmentation and quantitatively analysis of cellular morphological features (area, eccentricity and full width at half maximum). Challenge experiments using realistic matrices, including simulated fresh produce wash water, coconut water and spinach wash water, demonstrated the method can be applied for use in situations that occur in food processing facilities. The results indicated E. coli cells that are lysed by T7 phages demonstrated significantly (P < 0.05) higher extracellular DNA release, altered cellular shape (from rod to circular) and diffused fluorescent signal intensity. Using this biosensing strategy, a sensitivity to detect Escherichia coli at 10 CFU/ml within 8 hours was achieved, both in laboratory medium and in complex matrices. The proposed phage based biosensing strategy enables rapid detection of bacteria and is applicable to analysis of food systems. Furthermore, the steps involved in this assay can be automated to enable detection of target bacteria in food facilities without extensive resources.

Recombinase polymerase amplification-lateral flow (RPA-LF) assay combined with immunomagnetic separation for rapid visual detection of Vibrio parahaemolyticus in raw oysters

This study was the first attempt to optimize a recombinase polymerase amplification (RPA) and lateral flow (LF) assay combined with immunomagnetic separation (IMS) for the detection of Vibrio parahaemolyticus in raw oysters. The newly developed IMS-RPA-LF assay effectively combines sample preparation, amplification, and detection into a single platform. Under optimal conditions, the average capture efficiency (CE) for 10⁴ colony forming units (CFU)/mL of four V. parahaemolyticus strains with 0.4 mg of immunomagnetic beads within 45 min was 80.3%. After optimization, the RPA-LF assay was able to detect V. parahaemolyticus within 15 min, comprising DNA amplification with RPA for 10 min at 37 °C and visualization of the amplicons through LF strips for 5 min. The RPA-LF assay exhibited good specificity by showing a test line for eight V. parahaemolyticus strains with different serotypes but no cross-reaction with 12 non-V. parahaemolyticus bacteria. RPA-LF assay was found to be sensitive and detected as low as 10 pg genomic DNA of V. parahaemolyticus. For spiked oyster samples, the detection sensitivity of V. parahaemolyticus was improved to 2 CFU/g by IMS-RPA-LF after enrichment for 4 h; in contrast, the IMS-PCR method required 8 h. Hence, even when V. parahaemolyticus was present in very low numbers in samples, the IMS-RPA-LF assay could be completed within half a workday. Because of the high sensitivity, specificity, and speed of the IMS-RPA-LF assay, this newly developed method opens a novel pathway for rapid diagnostic screening of V. parahaemolyticus in seafood, which is an increasingly important health issue worldwide. Graphical abstract.

An assay for Staphylococcus aureus based on a self-catalytic ampicillin–metal (Fe3+)-organic gels–H2O2 chemiluminescence system with near-zero background noise

A self-catalytic ampicillin–metal (Fe³⁺)-organic gels (AMP–MOGs (Fe))–H₂O₂ CL system, which is not influenced by transition metal ions, was studied.

An ultrasensitive biosensor for colorimetric detection of Salmonella in large-volume sample using magnetic grid separation and platinum loaded zeolitic imidazolate Framework-8 nanocatalysts

Salmonella is the leading risk factor in food safety. Rapid, sensitive and accurate detection of Salmonella is a key to prevent and control the outbreaks of foodborne diseases caused by Salmonella. In this study, we reported a colorimetric biosensor for ultrasensitive detection of Salmonella Typhimurium using a magnetic grid separation column to efficiently separate target bacteria from large volume of sample and platinum loaded zeolitic imidazolate framework-8 (Pt@ZIF-8) nanocatalysts to effectively amplify biological signal. The target Salmonella cells in large volume of sample were first separated and concentrated using the magnetic grid separation column with immune magnetic particle chains, then conjugated with the immune Pt@ZIF-8 nanocatalysts to mimic peroxidase for catalysis of hydrogen peroxide-3,3',5,5'-tetramethylbenzidine, and finally determined by measuring the catalysate at characteristic wavelength of 450 nm. This proposed biosensor was able to separate ∼70% of target Salmonella cells from 50 mL of bacterial sample and quantitatively detect Salmonella from 10¹ to 10⁴ CFU/mL in 2.5 h with the lower detection limit of 11 CFU/mL. The mean recovery for Salmonella in spiked chicken carcass was about 109.8%. This new magnetic grid separation method was first time reported for efficient separation of target bacteria from very large volume of sample to greatly improve the sensitivity of this biosensor and could be used with various biosensing assays for practical applications in routine detection of foodborne pathogens without any bacterial pre-enrichment.