Micellar electrokinetic chromatography as efficient alternative for the multiresidue determination of seven neonicotinoids and 6-chloronicotinic acid in environmental samples

A Recyclable Luminescent MOF Sensor for On-Site Detection of Insecticide Dinotefuran and Anti-Parkinson's Drug Entacapone in Various Environmental and Biological Specimens

The monitoring and precise determination of pesticides and pharmaceutical drugs and their residues have become increasingly important in the field of food safety and water contamination issues. Herein, a fluorescent aluminium MOF-based sensor (1) was developed for the selective recognition of neonicotinoid insecticide dinotefuran and anti-Parkinson's drug entacapone. Guest-free MOF 1' exhibited ultra-fast response (<5 s) and ultra-low detection limits of 2.3 and 7.6 nM for dinotefuran and entacapone, which are lower than the previously reported MOF-based sensors. In the presence of other competitive analytes, great selectivity was achieved towards both analytes. The probe was recyclable up to five cycles. The sensing ability was explored towards entacapone in human serum, urine and dinotefuran in real soil, rice, honey samples, different fruits, vegetables, real water specimens and a wide range of pH media. A low-cost, handy MOF-based polymer thin-film composite (1'@PVDF-PVP) was developed for the on-site detection of dinotefuran and entacapone. Mechanistic studies involving analytical techniques and theoretical calculations suggested that FRET and PET are the probable reasons for entacapone sensing whereas IFE is responsible for dinotefuran detection. The entire work presents a low cost, multi-use photoluminescent sensor of entacapone and dinotefuran to address the environmental pollution.

Analytical Methods Based on Liquid Chromatography and Capillary Electrophoresis to Determine Neonicotinoid Residues in Complex Matrices. A Comprehensive Review

Neonicotinoids (NNIs) are neuro-active and systemic insecticides widely used to protect crops from pest attack. During the last decades, there has been an increase concern about their uses and toxic effects, especially to beneficial and non-target insects such as pollinators. To assess potential health hazards and the environmental impacts derived from NNIs uses, a great variety of analytical procedures for the determination of their residues and their metabolites at trace level in environmental, biological and food samples have been reported. Due to the complexity of the samples, efficient sample pretreatment methods have been developed, which include mostly clean-up and preconcentration steps. On the other hand, among the analytical techniques used for their determination, high-performance liquid chromatography (HPLC) coupled to ultraviolet (UV) or mass spectrometry (MS) detection is the most widely used, although capillary electrophoresis (CE) has also been employed in the last years, considering some improvements in sensitivity when coupling with new MS detectors. In this review, we present a critical overview of analytical methods based on HPLC and CE reported in the last decade, discussing relevant and innovative sample treatments for the analysis of environmental, food and biological samples.

A fluorescent aptasensor based on gold nanoparticles quenching the fluorescence of rhodamine B to detect acetamiprid

Pesticide residue detection is one of the main safety issues in the utilization of medicinal plants. In this work, a highly selective and sensitive aptasensor for acetamiprid determination was designed. The mechanism of the proposed method is based on the fluorescence resonance energy transfer (FRET) between gold nanoparticles (AuNPs) and rhodamine B (RB). Aptamers protect AuNPs from salt-induced aggregation, which causes fluorescence quenching of RB by the AuNPs via surface energy transfer. In the absence of acetamiprid, AuNPs were coated with aptamers on the surface and dispersed in NaCl solution. At this time, the dispersed AuNPs could perfectly quench the fluorescence intensity of RB. In contrast, in the presence of acetamiprid, aptamers specifically combine with acetamiprid to form a complex. With a high salt concentration, AuNPs would be aggregated without aptamer protection, weakening the RB quenching effect. Therefore, the concentration of acetamiprid could be obtained from the change in fluorescence intensity in the system. A fluorescent sensing method was established with a linear range from 0.1 to 3 μg mL^-1, and the LOD was 0.0285 μg mL^-1. The recoveries of acetamiprid in traditional Chinese medicine (TCM) samples were 96.23-105.75%. This method has great application value for the detection of acetamiprid in a complex sample matrix.

Impurity identification in thiamethoxam by high resolution mass spectrometry and computer assisted elucidation

Thiamethoxam (TMX) is a widely used neonicotinoid insecticide in pest control. Identification of structurally related impurities is very important during certified reference material development and pesticide registration, thus it needs to be carefully characterized. In this study, a combined strategy with liquid chromatography-high resolution mass spectrometry and computer assisted elucidation (SIRIUS) has been developed for the impurity elucidation in TMX material. MS and MS/MS spectra were used to score the impurity candidates by isotope score and fragment tree in SIRIUS. TMX, the main component, worked as an anchor for formula identification and structure elucidation of impurity. With this strategy, four impurities were identified, including two byproducts (TMX-OCH₃ and TMX-Cl) and two metabolites (clothianidin and TMX-urea). Their fragmentation pathways were concluded, and mechanism of impurity formation was also proposed. This result showed successful application of combining human intelligence with machine learning in impurity identification from chemicals.

Nanofibrous Online Solid-Phase Extraction Coupled with Liquid Chromatography for the Determination of Neonicotinoid Pesticides in River Waters

Polymeric nano- and microfibers were tested as potential sorbents for the extraction of five neonicotinoids from natural waters. Nanofibrous mats were prepared from polycaprolactone, polyvinylidene fluoride, polystyrene, polyamide 6, polyacrylonitrile, and polyimide, as well as microfibers of polyethylene, a polycaprolactone nano- and microfiber conjugate, and polycaprolactone microfibers combined with polyvinylidene fluoride nanofibers. Polyimide nanofibers were selected as the most suitable sorbent for these analytes and the matrix. A Lab-In-Syringe system enabled automated preconcentration via online SPE of large sample volumes at low pressure with analyte separation by HPLC. Several mat layers were housed in a solvent filter holder integrated into the injection loop of an HPLC system. After loading 2 mL sample on the sorbent, the mobile phase eluted the retained analytes onto the chromatographic column. Extraction efficiencies of 68.8–83.4% were achieved. Large preconcentration factors ranging from 70 to 82 allowed reaching LOD and LOQ values of 0.4 to 1.7 and 1.2 to 5.5 µg·L⁻¹, respectively. Analyte recoveries from spiked river waters ranged from 53.8% to 113.3% at the 5 µg·L⁻¹ level and from 62.8% to 119.8% at the 20 µg·L⁻¹ level. The developed methodology proved suitable for the determination of thiamethoxam, clothianidin, imidacloprid, and thiacloprid, whereas matrix peak overlapping inhibited quantification of acetamiprid.

Zeolitic imidazolate framework-8 decorated with gold nanoparticles for solid-phase extraction of neonicotinoids in agricultural samples

A composite built with aminated zeolitic imidazolate framework and gold nanoparticles (AuNPs) for solid-phase extraction (SPE) of neonicotinoids in agricultural samples is presented. The composite was prepared through the assembly of AuNPs onto the surface of metal-organic framework based on the strong interaction between the amino group and AuNP. These metallic surfaces provided additional interactions based on the affinity of amino and cyano groups present in the target compounds. The composite was characterized by scanning electron microscopy, powder X-ray diffraction, Fourier-transform infrared spectroscopy, and surface area measurements. Regarding the SPE protocol, several parameters that can influence the extraction performance were optimized, such as sample volume or composition of elution solvent, among others. After elution, the analytes were determined via HPLC with diode-array detection. Under the selected conditions, satisfactory recoveries of five pesticides (thiamethoxan, clothianidin, imidacloprid, acetamiprid, and thiacloprid) were obtained (between 80 and 110%) in real samples, whereas the limits of detection ranged from 0.019 to 0.041 μg L^-1 in aqueous samples and 0.3 to 0.8 μg g^-1 in solid samples.

Recyclable Luminescence Sensor for Dinotefuran in Water by Stable Cadmium-Organic Framework

Due to the widespread use of dinotefuran around the world, its impact on food and environmental safety has aroused great concern, and the establishment of a rapid and convenient approach for dinotefuran detection is necessary but challenging. Herein, we synthesized a unique three-dimensional framework {[(CH₃)₂NH₂]₂[Cd₃(BCP)₂]·10H₂O·3.5DMF}_n (1). Single-crystal X-ray analysis indicates that 1 possesses a 4,8-connected anion framework that corresponds to alb topology, with a one-dimensional rectangular channel along the c-axis with the size of 4 Å × 10 Å. Compound 1 displays satisfactory solvent and thermal stability. Luminescent investigations reveal that 1 can selectively detect dinotefuran by fluorescence quenching among other pesticides, displaying excellent anti-interference performance with common ions in water. Importantly, the limit of detection is as low as 2.09 ppm, which is far below the residual concentration of the U.S. food standard. A fluorescence quenching mechanism study shows that there exists competitive energy absorption and static quenching processes. To our knowledge, 1 is the first MOF-based fluorescence probe for dinotefuran detection.