Development of a thin-film solid-phase microextraction (TF-SPME) method coupled to liquid chromatography and tandem mass spectrometry for high-throughput determination of steroid hormones in white sucker fish plasma

Development and characterization of a non-enzymatic electrochemical biosensor for rapid determination of sorbent-based extracted trazodone and doxepin in complicated samples

BACKGROUND

Given the importance of achieving optimal therapeutical concentration in patients treated with antidepressants, this study investigates a novel technique for the simultaneous determination of trazodone (TRZ) and doxepin (DOX) in human plasma and serum samples for the first time.

RESULTS

To achieve simultaneous determination of two antidepressants, TRZ and DOX, a novel detection system was designed: a non-enzymatic voltammetric biosensor based on boron-reduced graphene oxide/manganese oxide nanoparticles (GCE/B-rGO/MnO NPs). The detection was accomplished after pre-concentration and extraction trace amounts of the analytes using the thin film-solid phase microextraction (TF-SPME) technique, which employed polyvinyl alcohol/polyvinyl acetate/copper oxide nanoparticles (PVA/PVAc/CuO NPs) electrospun nanofibers. The successful preparation of composite nanofibers and modified electrodes was confirmed using the evaluation of field emission-scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDX). Also, the composite nanofibers were characterized with attenuated total reflectance-Fourier transform-infrared (ATR-FT-IR) and X-ray diffraction (XRD). In the solution of TRZ and DOX, under optimum experimental conditions, the linear dynamic ranges (LDRs) were 0.1-20.0 μmol L-1 and 0.5-27.0 μmol L-1, respectively. Also, the limit of detection (LOD) values of TRZ and DOX were 0.032 and 0.150 μmol L-1.

SIGNIFICANCE

PVAc acts as a cross-linking agent for PVA, and their mixture is effective for sample preparation and pre-concentration of analytes in complex matrices. Also, adding CuO NPs to this polymeric mixture enhanced the adsorption efficiency. Taking advantage of the high surface area of MnO NPs and the high electrical conductivity of B-rGO, and considering the superiority of their simultaneous utilization, the constructed electrochemical biosensor is both cost-effective and rapid. It demonstrates excellent stability, repeatability, and sensitivity for the simultaneous determination of TRZ and DOX under optimal conditions. This biosensor, the first of its kind, is specifically designed for the simultaneous determination of TRZ and DOX in human plasma and serum samples, representing a significant advancement in biosensing technology.

On-Line Analysis of Cigarette Smoke Based on Microwave Plasma Torch Mass Spectrometry

Cigarette smoke contains a large number of chemicals, including both flavor components and harmful substances. The mainstream smoke (MSS) generated by smoking is directly inhaled by individuals, making it crucial to establish an effective method for smoke detection and analysis. One promising technique for analyzing smoke is MPT-MS (Microwave plasma torch mass spectrometry). This approach offers several advantages in accurately detecting the composition of cigarette smoke. By combining MPT-MS with a smoke pumping device, we can achieve real-time online detection of smoke components. We successfully detected 22 flavor compounds present in the smoke. These compounds contribute to the distinct taste of cigarettes. Moreover, we identified 2 polycyclic aromatic hydrocarbons (PAHs) in the smoke. PAHs are known carcinogens and are of great concern in terms of their potential health risks. The successful detection and identification of flavor compounds and PAHs using our method confirm the online detection capability of MPT-MS. This approach provides an efficient and reliable means for analyzing the complex composition of cigarette smoke. By utilizing MPT-MS, we can gain valuable insights into the chemical composition of cigarette smoke and can inform the development of strategies and policies aimed at reducing the harmful effects of smoking and protecting public health.

Novel filter-press single-step cleanup approach facilitated rapid screening and accurate quantification of 112 veterinary drugs in aquatic products

In this study, a novel filter-press cleanup column was developed as a single-step cleanup approach for the rapid screening and quantification of 112 veterinary drugs in fish samples. Fish muscle samples were extracted with acetonitrile and ethyl acetate, sequentially. After concentration and reconstitution, N-propylethylenediamine (PSA) sorbent, packed in filter-press column, allows rapid single-step cleanup operation, while UHPLC-Q-Orbitrap-HRMS provides high-precision mass information in multi-residue screening. Under optimum settings, the detection and quantification limits were validated at 0.5 and 2.0 μg·kg-1, for all analytes, respectively. The ranges of recoveries were from 35.3 to 138.4%. Most of these target analytes (82%) could be measured with recoveries between 60 and 130%, and intra-day RSDs ranging from 1.9 to 26.1%. This method was further applied to evaluate the residual of veterinary drugs in fish samples from four cities in China, and results demonstrated its practicability for multi-residue monitoring veterinary residues for food safety administration.

Cortisol as a Stress Indicator in Fish: Sampling Methods, Analytical Techniques, and Organic Pollutant Exposure Assessments

Cortisol is the main glucocorticoid released during stress responses in most fish and has been employed to investigate different stressors, including organic pollutants. This review discusses shifts in cortisol concentrations and examines different matrix sampling methods (invasive vs. minimally or non-invasive) and the main analytical cortisol determination techniques (immunoassays and liquid chromatography-tandem mass spectrometry). Assessments on organic pollutant exposure in fish and associated adverse effects are also discussed. Studies in this regard may aid in identifying organic pollutant toxicological modes of action, mechanistic response, toxicokinetics, and toxicodynamics, as well as pollution sources and associated health risks in fish, ultimately aiding in the development of effective management strategies to mitigate the impacts of organic pollutants on fish populations and their associated ecosystems.

Development of Fe3O4/reduced graphene oxide nanocomposite-based dispersive solid-phase extraction for the quantification of five steroid hormones

Aim: An accurate and sensitive analytical method was proposed to detect some steroid hormones in biological samples. Materials & methods: An Fe₃O₄/reduced graphene oxide nanocomposite-based dispersive solid-phase extraction was developed for the effective and simple preconcentration of steroid hormones from human serum samples. Results & conclusion: The nanocomposite was firstly used as adsorbent to simultaneously extract the selected hormones. Limit of detection values for the selected hormones were calculated between 5.5 and 39.2 ng/kg (mass based). An artificial serum sample was used to test the applicability and accuracy of the developed method; percentage recovery results obtained from two different spiked concentrations were found to be in the range of 80.5-99.9%.

Development of a polyurethane-coated thin film solid phase microextraction device for multi-residue monitoring of pesticides in fruit and tea beverages

A novel solid-phase microextraction device coated with an efficient and cheap thin film of polyurethane was developed for trace determination of 13 widely used pesticides in fruit and tea beverages. A round-shaped polyurethane film covering the bottom of a glass vial was fabricated as the sorbent to exhibit a superior capacity for preconcentrating target compounds and reducing matrix interferences. After optimization of the key parameters including the film type, extraction time, solution pH, ionic strength, desorption solvent, and conditions, this device allowed an efficient adsorption-desorption cycle for the pesticides accomplished in one vial. Coupled with gas chromatography-electron capture detection, the polyurethane-coated thin film microextraction method was successfully established and applied for the analysis of real fruit and tea drinks, showing low limits of detection (0.001-0.015 μg/L), wide linear ranges (1.0-500.0 μg/L, r²  > 0.9931), good relative recoveries (77.2%-106.3%) and negligible matrix effects (86.1%-107.5%) for the target pesticides. The proposed approach revealed strong potential of extending its application by flexibly modifying the type or size of the coating film. This study provides insights into the enrichment of contaminants from complex samples using inexpensive and reusable microextraction devices that can limit the environmental and health impact of the sample preparation protocol.

Development of the thin film solid phase microextraction (TF-SPME) method for metabolomics profiling of steroidal hormones from urine samples using LC-QTOF/MS

In the present study, the development and optimization of a thin film solid phase microextraction method (TF-SPME) was conducted for metabolomics profiling of eight steroid compounds (androsterone, dihydrotestosterone, dihydroepiandrosterone, estradiol, hydroxyprogesterone, pregnenolone, progesterone and testosterone) from urine samples. For optimization of extraction method, two extraction sorbents (PAN-C18 and PS-DVB) were used as they are known to be effective for isolation of low-polarity analytes. The stages of sample extraction and analyte desorption were considered as the most crucial steps in the process. Regarding the selection of the most suitable desorption solution, six different mixtures were analyzed. As a result, the mixture of ACN: MeOH (1:1, v/v) was chosen in terms of the highest analytes' abundances that were achieved using the chosen solvent. Besides other factors were examined such as the volume of desorption solvent and the time of both extraction and desorption processes. The analytical determination was carried out using the ultra-high performance liquid chromatography coupled with high resolution tandem mass spectrometry detection in electrospray ionization and positive polarity in a scan mode (UHPLC-ESI-QTOF/MS). The developed and optimized TF-SPME method was validated in terms of such parameters as extraction efficiency, recovery as well as matrix effect. As a result, the extraction efficiency and recovery were in a range from 79.3% to 99.2% and from 88.8% to 111.8%, respectively. Matrix effect, calculated as coefficient of variation was less than 15% and was in a range from 1.4% to 11.1%. The values of both validation parameters (recovery and matrix effect) were acceptable in terms of EMA criteria. The proposed TF-SPME method was used successfully for isolation of steroids hormones from pooled urine samples before and after enzymatic hydrolysis of analytes.

Determination of steroid hormone residues in farmed fish using high-resolution orbital ion trap mass spectrometry

A method for the determination of 15 steroid hormones in farmed fish by liquid chromatography-orbital ion trap mass spectrometry has been developed and validated. The method involved sample preparation with acetonitrile extraction and clean-up, and separation in the LC using a C₁₈ column. The orbital ion trap MS was operated at a resolution of 35 000 FWHM in selected ion monitoring mode. An ion source with heated electrospray ionization was used in positive ionization mode. The samples were prepared by solid-phase extraction. The limit of quantification of steroid hormones in fish samples was 2 μg kg^-1. Good linearity was observed since correlation coefficients were more than 0.99 for all compounds. Recoveries of spiked fish samples (2 μg kg^-1 and 20 μg kg^-1) ranged from 80.8% to 112.6% with relative deviations less than 15%. The method was successfully applied to detect steroid hormones in real farmed fish samples at the μg kg^-1 level.

Binding the gap between experiments, statistics, and method comparison: A tutorial for computing limits of detection and quantification in univariate calibration for complex samples

The present tutorial aims to review the most frequently reported criteria for the calculation of the limits of detection (LOD) and quantification (LOQ) in univariate calibration, summarizing their fundamentals, advantages, and limitations. The current criteria for estimating LOD and LOQ are based on diverse theoretical and/or empirical assumptions and require different amounts of experimental data, making the calculation rather complex in some cases. Moreover, alternative forms for calculating LOD/LOQ frequently lead to dissimilar results. This scenario might worsen in the case of complex analytical systems. Throughout this tutorial, different forms of calculating LOD/LOQ are illustrated using previously reported experimental datasets in the environmental chemistry field as examples. The influence of the sample matrix during the estimation of LOD/LOQ parameters is investigated through one calibration approache. The discrepancies in the obtained results with different criteria for the calculation of LOD/LOQ are highlighted. Finally, general guidelines and recommendations regarding experimental and data processing issues are proposed, aiming to promote fair criteria for the comparison of different analytical methodologies in terms of prediction ability and detection capability.

In Vivo Solid-Phase Microextraction and Applications in Environmental Sciences

Solid-phase microextraction (SPME) is a well-established sample-preparation technique for environmental studies. The application of SPME has extended from the headspace extraction of volatile compounds to the capture of active components in living organisms via the direct immersion of SPME probes into the tissue (in vivo SPME). The development of biocompatible coatings and the availability of different calibration approaches enable the in vivo sampling of exogenous and endogenous compounds from the living plants and animals without the need for tissue collection. In addition, new geometries such as thin-film coatings, needle-trap devices, recession needles, coated tips, and blades have increased the sensitivity and robustness of in vivo sampling. In this paper, we detail the fundamentals of in vivo SPME, including the various extraction modes, coating geometries, calibration methods, and data analysis methods that are commonly employed. We also discuss recent applications of in vivo SPME in environmental studies and in the analysis of pollutants in plant and animal tissues, as well as in human saliva, breath, and skin analysis. As we show, in vivo SPME has tremendous potential for the targeted and untargeted screening of small molecules in living organisms for environmental monitoring applications.