Surface-enhanced Raman scattering (SERS)-based immunosystem for ultrasensitive detection of the 90K biomarker

Exploring the applications for Abscissic acid (ABA) detection using perovskite derived opto-electronic sensors

The hormone abscisic acid (ABA) is crucial in the regulation of many physiological processes in plants, particularly in stress response and developmental control. Recent developments in detection methods utilizing opto-electronic sensors have enabled a more profound comprehension of the processes linked to plant hormones, namely ABA. The present work investigates the potential uses of opto-electronic sensors produced from tailored perovskite materials for the targeted detection of ABA. Modified perovskite substrates, which are characterized by their large surface area, intense Raman scattering, and great sensitivity, provide a distinct advantage in differentiating ABA from other interfering substances present in intricate plant media. Notwithstanding the advancements in these sophisticated detection methods, there is still a significant lack of knowledge on how the distinct opto-electronic characteristics of high-purity perovskite crystals impact their ability to detect ABA. This work aims to close this gap by a thorough investigation of the production, modification, and use of sensors based on perovskite materials. This study also intends to give a thorough analysis comparing the performance of perovskite substrates with traditional substrates, with a specific focus on important characteristics including efficiency, specificity, and sensitivity. Furthermore, the objective of this study is to evaluate the capacity of perovskite substrates to surpass the constraints of conventional detection techniques, namely in terms of sensitivity and interference from competing matrix components. The objective of this work is to make novel contributions to the design and optimization of opto-electronic sensors based on perovskite materials, with the goal of achieving more accurate and dependable detection of ABA. Consequently, this could facilitate the advancement of specialized diagnostic instruments for monitoring plant hormones, so enabling the use of enhanced agricultural techniques and effective stress management in plants.

Magnetic polyphosphazene@Au particles as substrates for multiple-detection of immunoproteins by surface-enhanced Raman spectroscopy

Au coated magnetic polyphosphazene (MPCTP) composite particles (MPCTP@Au) were fabricated with sensitive SERS activity. The MPCTP particles were generated by coating polyphosphazene on Fe₃O₄ nanoparticles through precipitation polycondensation of hexachlorocyclotriphosphazene and phloroglucinol. MPCTP@Au composite particles were obtained by deposition of Au nanoparticles on MPCTP by the reduction of HAuCl₄. The size and the thickness of the Au shell can be controlled by varying the amount of HAuCl₄. The magnetic core endowed the composite particles with good magnetic responsiveness, which allowed the analyte to be enriched and separated from the complex matrix, and significantly simplifying the sample pretreatment procedure. The SERS activity of MPCTP@Au composite particles were evaluated by DTNB as model Raman reporter, and the limits of detection (LOD) of DTNB was 10^-8 mol/L. A high efficient SERS immunoassay system based on the MPCTP@Au substrates for the detection of immunoproteins was developed. Human IgG and rabbit IgG were quantitatively determinated simultaneously by this immunoassay system. The quantitative determination of the immunoglobulin G (IgG) was achieved and the LOD of human IgG, rabbit IgG and the mixture of human IgG and rabbit IgG were as low as 10 fg/mL, 100 pg/mL and 1 ng/mL, respectively. The results showed that the MPCTP@Au composite particles have broad application prospects as high performance SERS active substrates for immunoprotein analysis.

SERS Immunosensors for Cancer Markers Detection

Early diagnosis and monitoring are essential for the effective treatment and survival of patients with different types of malignancy. To this end, the accurate and sensitive determination of substances in human biological fluids related to cancer diagnosis and/or prognosis, i.e., cancer biomarkers, is of ultimate importance. Advancements in the field of immunodetection and nanomaterials have enabled the application of new transduction approaches for the sensitive detection of single or multiple cancer biomarkers in biological fluids. Immunosensors based on surface-enhanced Raman spectroscopy (SERS) are examples where the special properties of nanostructured materials and immunoreagents are combined to develop analytical tools that hold promise for point-of-care applications. In this frame, the subject of this review article is to present the advancements made so far regarding the immunochemical determination of cancer biomarkers by SERS. Thus, after a short introduction about the principles of both immunoassays and SERS, an extended presentation of up-to-date works regarding both single and multi-analyte determination of cancer biomarkers is presented. Finally, future perspectives on the field of SERS immunosensors for cancer markers detection are briefly discussed.

Increased Gal-3BP plasma levels in hospitalized patients infected with SARS-CoV-2

Coronavirus disease 2019 (COVID-19) has quickly turned into a health, financial and societal problem globally. The complex pathogenesis of severe acute respiratory syndrome coronavirus centers on the unpredictable clinical progression of the disease, which may evolve abruptly and results in critical and life-threatening clinical complications. Effective laboratory biomarkers that can classify patients according to risk of progression to severe disease are essential for ensuring timely treatment. Gal-3BP is a human secreted protein with innate immune functions, which is upregulated in viral infections, promotes inflammation and has been shown to induce IL-6 expression. In this study, Gal-3BP plasma levels were measured retrospectively in a cohort of 84 hospitalized COVID-19 patients. These were classified as having either "non-severe" or "severe" disease. Compared to healthy controls, Gal-3BP plasma levels were markedly increased in COVID-19 patients (P < 0.0001). Moreover, the levels were higher in severe than in non-severe patients (P < 0.05). As expected, patients with severe disease had plasma levels of IL-6 higher than patients with non-severe disease (P < 0.01). In non-severe disease patients, Gal-3BP levels collected at a late stage (13.3 + 5.7 days after the first positive PCR result) were significantly lower than those collected at an early stage (4.2 + 2.9 days form the first positive PCR result). Larger prospective analyses are needed to strength our understanding of the prognostic utility of Gal-3BP in COVID-19 patients.

Ultrasensitive detection of multiple cancer biomarkers by a triple cascade amplification strategy in combination with single particle inductively coupled plasma mass spectrometry

A versatile triple cascade amplification strategy was developed for ultrasensitive simultaneous detection of multiple cancer biomarkers using single particle inductively coupled plasma mass spectrometry (spICP-MS). The triple cascade amplification strategy consisted of an enhanced RecJ_f exonuclease-assisted target recycling amplification module, a hybridization chain reaction amplification module, and a signal amplification module based on DNA-templated multiple metal nanoclusters. In the enhanced RecJ_f exonuclease-assisted target recycling amplification module, the DNA bases at the 5' ends of aptamers for specific recognition of biomarkers were deliberately replaced by the corresponding RNA bases to enhance amplification efficiency. The signal amplification module based on DNA-templated multiple metal nanoclusters was innovatively used to amplify the signals measured by spICP-MS and at the same time effectively suppress possible background interferences. The proposed spICP-MS platform achieved satisfactory quantitative results for both carcinoembryonic antigen (CEA) and a-fetoprotein (AFP) in human serum samples with accuracy comparable to that of the commercial ELISA kits. Moreover, it has wide dynamic ranges for both CEA (0.01-100 ng/mL) and AFP (0.01-200 ng/mL). The limit of detection for CEA and AFP was 0.6 and 0.5 pg/mL, respectively. Compared with conventional biomarkers detection methods, the proposed spICP-MS platform has the advantages of operational simplicity, ultra-high sensitivity, wide dynamic range, and low background. Therefore, it is reasonable to expect that the proposed spICP-MS platform can be further developed to be a promising alternative tool for biomarker detection in fields of clinical diagnosis and biomedical research.

Editorial for the Special Issue on Nanostructured Surfaces and Devices for Biomedical Applications

The ability to control and modify the surface topography of materials at the nanoscale, which produces features with a comparable size to that of biological entities, so as to effectively probe and influence processes at both the cellular and the molecular level, has facilitated incredible possibilities in the fields of biomedicine, biosensing, and diagnostics [...].

Label-Free Physical Techniques and Methodologies for Proteins Detection in Microfluidic Biosensor Structures

Proteins in biological fluids (blood, urine, cerebrospinal fluid) are important biomarkers of various pathological conditions. Protein biomarkers detection and quantification have been proven to be an indispensable diagnostic tool in clinical practice. There is a growing tendency towards using portable diagnostic biosensor devices for point-of-care (POC) analysis based on microfluidic technology as an alternative to conventional laboratory protein assays. In contrast to universally accepted analytical methods involving protein labeling, label-free approaches often allow the development of biosensors with minimal requirements for sample preparation by omitting expensive labelling reagents. The aim of the present work is to review the variety of physical label-free techniques of protein detection and characterization which are suitable for application in micro-fluidic structures and analyze the technological and material aspects of label-free biosensors that implement these methods. The most widely used optical and impedance spectroscopy techniques: absorption, fluorescence, surface plasmon resonance, Raman scattering, and interferometry, as well as new trends in photonics are reviewed. The challenges of materials selection, surfaces tailoring in microfluidic structures, and enhancement of the sensitivity and miniaturization of biosensor systems are discussed. The review provides an overview for current advances and future trends in microfluidics integrated technologies for label-free protein biomarkers detection and discusses existing challenges and a way towards novel solutions.

Enhancing Antibodies' Binding Capacity through Oriented Functionalization of Plasmonic Surfaces

Protein A has long been used in different research fields due to its ability to specifically recognize immunoglobulins (Ig). The protein derived from Staphylococcus aureus binds Ig through the Fc region of the antibody, showing its strongest binding in immunoglobulin G (IgG), making it the most used protein in its purification and detection. The research presented here integrates, for the first time, protein A to a silicon surface patterned with gold nanoparticles for the oriented binding of IgG. The signal detection is conveyed through a metal enhanced fluorescence (MEF) system. Orienting immunoglobulins allows the exposition of the fragment antigen-binding (Fab) region for the binding to its antigen, substantially increasing the binding capacity per antibody immobilized. Antibodies orientation is of crucial importance in many diagnostics devices, particularly when either component is in limited quantities.

Plasmonic Pollen Grain Nanostructures: A Three-Dimensional Surface-Enhanced Raman Scattering (SERS)-Active Substrate

A new route has been developed to design plasmonic pollen grain-like nanostructures (PGNSs) as surface-enhanced Raman scattering (SERS)-active substrate. The nanostructures consisting of silver (Ag) and gold (Au) nanoparticles along with zinc oxide (ZnO) nanoclusters as spacers were found highly SERS-active. The morphology of PGNSs and those obtained in the intermediate stage along with each elemental evolution has been investigated by a high-resolution field emission scanning electron microscopy. The optical band gaps and crystal structure have been identified by UV-vis absorption and X-ray powder diffraction (XRD) measurements, respectively. For PGNSs specimen, three distinct absorption bands related to constituent elements Ag, Au, and ZnO were observed, whereas XRD peaks confirmed the existence of Ag, Au, and ZnO within the composition of PGNSs. SERS-activity of PGNSs was confirmed using Rhodamine 6G (R6G) as Raman-active dyes. Air-cooled solid-state laser kits of 532 nm were used as excitation sources in SERS measurements. SERS enhancement factor was estimated for PGNSs specimen and was found as high as 3.5×10⁶ . Finite difference time domain analysis was carried out to correlate the electromagnetic (EM) near-field distributions with the experiment results achieved under this investigation. EM near-field distributions at different planes were extracted for s-, p- and 45° of incident polarizations. EM near-field distributions for such nanostructures as well as current density distributions under different circumstances were demonstrated and plausible scenarios were elucidated given SERS enhancements. Such generic fabrication route as well as correlated investigation is not only indispensable to realize the potential of SERS applications but also unveil the underneath plasmonic characteristics of complex SERS-active nanostructures.