A novel copper-based metal-organic framework as a peroxidase-mimicking enzyme and its glucose chemiluminescence sensing application

In situ growth of self-supported CuO nanorods from Cu-MOFs for glucose sensing and elucidation of the sensing mechanism

Herein, we present a simple and mild method to in situ prepare CuO nanostructures for non-enzymatic glucose sensing. A Cu-metal organic framework (Cu-MOF) precursor was first directly grown on a pencil lead electrode with 3D graphene-like surfaces (EPLE) and then in situ transformed into CuO nanorods. The CuO nanorod-modified EPLE (CuO/EPLE) shows high sensitivity (1138.32 μA mM-1 cm-2), fast response time (1.5 s) and low detection limit (0.11 μM) for glucose oxidation. It has been found that NaOH promoted the generation of ˙OH groups and Cu(III) on the CuO surface, which then facilitated the electrochemical oxidation of glucose. Signals characteristic of hydroxyl and carbon-centered radical adducts were detected by EPR. Furthermore, the CuO/EPLE sensor also shows good accuracy in glucose determination in human serum samples.

Bimetallic Cu-Zn Zeolitic Imidazolate Frameworks as Peroxidase Mimics for the Detection of Hydrogen Peroxide: Electrochemical and Spectrophotometric Evaluation

A copper incorporated zeolitic imidazolate framework-8 (ZIF-8) has been synthesized and demonstrated to be a potential material for a peroxidase mimic. The resultant bimetallic Cu-Zn incorporated MOF is used for the dual mode sensing of hydrogen peroxide by following electrochemical as well as spectrophotometric methods. Using 3,3',5,5'-tetramethylbenzidine (TMB) as a chromogenic substrate, spectrophotometric studies are carried out, and the steady state kinetic parameters are determined for two different concentrations of Cu incorporated ZIF-8 (viz Cu@ZIF-8-1 and Cu@ZIF-8-2). It is found that both Cu@ZIF-8-1 and Cu@ZIF-8-2 exhibit more affinity toward the TMB substrate than the horseradish peroxidase (HRP) enzyme as indicated by the low Km values obtained for the substrate. Also, as the concentration of incorporated Cu increases, Vmax values are also found to be enhanced. Electrochemically, the Cu@ZIF-8 modified glassy carbon electrode (GCE) showed a good response for peroxide detection in the concentration range from 0.5 mM to 5 mM at a working potential of -0.25 V in PBS (pH 7.0) with a limit of detection (LOD) value of 0.46 mM and a sensitivity of 20.25 μA/mM. Further, the chromogenic substrate TMB is successfully immobilized on the electrode surface and subsequently used for the peroxide detection along with Cu@ZIF-8. Here, TMB acts as a mediator and shifted the working potential to 0.1 V in acetate buffer (pH 5.0) in the concentration range from 0.5 mM to 5 mM with an LOD value of 0.499 mM and a sensitivity of 0.097 μA/mM. Interestingly, the same electrode in PBS of pH 7.0 showed a response to peroxide at a working potential of -0.1 V in the concentration range from 0.5 mM to 5 mM with an LOD value of 0.143 mM and a sensitivity of 0.33 μA/mM. Moreover, the applicability of this material for peroxide sensing is evaluated using milk samples, and the proposed material is able to recover the peroxide present in milk. Thus, the bimetallic Cu-Zn MOF can be utilized for the dual mode sensing of peroxide and can be extended for various real time applications.

Synthesis of Two-Dimensional (Cu-S)n Metal-Organic Framework Nanosheets Applied as Peroxidase Mimics for Detection of Glutathione

Facilely synthesized peroxidase-like nanozymes with high catalytic activity and stability may serve as effective biocatalysts. The present study synthesizes peroxidase-like nanozymes with multinuclear active sites using two-dimensional (2D) metal-organic framework (MOF) nanosheets and evaluates them for their practical applications. A simple method involving a one-pot bottom-up reflux reaction is developed for the mass synthesis of (Cu-S)n MOF 2D nanosheets, significantly increasing production quantity and reducing reaction time compared to traditional autoclave methods. The (Cu-S)n MOF 2D nanosheets with the unique coordination of Cu(I) stabilized in Cu-based MOFs demonstrate impressive activity in mimicking natural peroxidase. The active sites of the peroxidase-like activity of (Cu-S)n MOF 2D nanosheets were predominantly verified as Cu(I) rather than Cu(II) of other Cu-based MOFs. The cost-effective and long-term stability of (Cu-S)n MOF 2D nanosheets make them suitable for practical applications. Furthermore, the inhibition of the peroxidase-like activity of (Cu-S)n MOF nanosheets by glutathione (GSH) could provide a simple strategy for colorimetric detection of GSH against other amino acids. This work remarkably extends the utilization of (Cu-S)n MOF 2D nanosheets in biosensing, revealing the potential for 2D (Cu-S)n MOFs.

Metal-Organic Framework for the Immobilization of Oxidoreductase Enzymes: Scopes and Perspectives

Oxidoreductases are a wide class of enzymes that can catalyze biological oxidation and reduction reactions. Nowadays, oxidoreductases play a vital part in most bioenergetic metabolic pathways, which have important applications in biodegradation, bioremediation, environmental applications, as well as biosensors. However, free oxidoreductases are not stable and hard to be recycled. In addition, cofactors are needed in most oxidoreductases catalyze reactions, which are so expensive and unstable that it hinders their industrial applications. Enzyme immobilization is a feasible strategy that can overcome these problems. Recently, metal-organic frameworks (MOFs) have shown great potential as support materials for immobilizing enzymes due to their unique properties, such as high surface-area-to-volume ratio, chemical stability, functional designability, and tunable pore size. This review discussed the application of MOFs and their composites as immobilized carriers of oxidoreductase, as well as the application of MOFs as catalysts and immobilized carriers in redox reactions in the perspective of the function of MOFs materials. The paper also focuses on the potential of MOF carrier-based oxidoreductase immobilization for designing an enzyme cascade reaction system.

Fe3 O4 and bimetal-organic framework Zn/Mg composite peroxide-like catalyze luminol chemiluminescence for specific measurement of atropine in Datura plant

Atropine (AT) is an anticholinergic drug. AT is abundantly in Datura plant seeds. Fe3 O4 @Zn/Mg MOF (Fe3 O4 @MOF) composite was synthesized. The compound had a high peroxidase-like activity in a chemiluminescence (CL) reaction. Addition of AT quenched CL. The linear range and limit of detection were 5-600 μg L-1 and 2 × 10-2  μg L-1 . This method is fast, reversible, and selective, without biodegradability effects, high accuracy, and precision for measuring AT in the Datura plant.

Metal-organic framework (MOF) hybridized gold nanoparticles as a bifunctional nanozyme for glucose sensing

Inspired by natural enzymes that possess multiple catalytic activities, here we develop a bifunctional metal-organic frame-work (MOF) for biosensing applications. Ultrasmall gold nano-particles (AuNPs) are grown in the internal cavities of an iron (Fe) porphyrin-based MOF to produce a hybridized nanozyme, AuNPs@PCN-224(Fe), in which AuNPs and PCN-224(Fe) exhibit the catalytic activity of glucose oxidase (GOx) and horseradish peroxidase (HRP), respectively. We established that the bifunctional nanozyme was capable of a cascade reaction to generate hydrogen peroxide in the presence of d-glucose and oxygen in situ, and subsequently activate a colorimetric or chemiluminescent substrate through HRP-mimicking catalytic activity. The nanozyme was selective over a range of other saccharides, and 93% of the catalytic activity was retained after being recycled five times.

Bioinspired Cu-based metal-organic framework mimicking SOD for superoxide anion sensing and scavenging

Superoxide anion (O₂^•-) is typically produced in living cells and organisms, while excess O₂^•- may cause unexpected damage, so monitoring and scavenging the O₂^•- is of considerable significance to exploring physiological and pathological process. In this study, a Cu-based metal-organic framework (Cu-MOF) which comprise sequential Cu metal ion and conductive organic 2,5-dicarboxylic acid-3,4-ethylene dioxythiophene is synthesized to mimic superoxide dismutase (SOD), in which Cu is the essence of active site. On one hand, the Cu-MOF possesses excellent electrocatalytic activity to detect O₂^•- at -0.05 V, biased at which potential the electrode showed good linearity toward O₂^•- with detection limit of 0.283 μM and interference immunity for AA, DA, UA, 5-HT and H₂O₂. The Cu-MOF modified microelectrode was applied for measuring the O₂^•- released from living cells real time and monitoring O₂^•- generation in rat brain. On the other hand, this Cu-MOF has the catalytic activity to mimic the superoxide dismutase for scavenging O₂^•- in HeLa cells effectively. This work provides a methodology to design metal ion based enzyme mimetic for analyzing and scavenging O₂^•- in cells and in vivo.

Optimization of the tandem enzyme activity of V-MOF and its derivatives for highly sensitive nonenzymatic detection of cholesterol in living cells

It remains a great challenge to properly design and synthesize single-component artificial tandem enzymes for specific substrates with high selectivity. Herein, V-MOF is synthesized by solvothermal method and its derivatives are constructed via pyrolyzing V-MOF in nitrogen atmosphere at different temperatures, which are denoted as V-MOF-y (y = 300, 400, 500, 700 and 800). V-MOF and V-MOF-y possess tandem enzyme-like activity, i.e. cholesterol oxidase-like and peroxidase-like activity. Among them, V-MOF-700 shows the strongest tandem enzyme activity for V-N bonds. Based on the cascade enzyme activity of V-MOF-700, the nonenzymatic detection platform for cholesterol by fluorescent assay can be established in the presence of o-phenylenediamine (OPD) for the first time. The detection mechanism is that V-MOF-700 catalyzes cholesterol to generate hydrogen peroxide and further form hydroxyl radical (•OH), which can oxidize OPD to obtain oxidized OPD (oxOPD) with yellow fluorescence. The linear detection of cholesterol ranges of 2-70 μM and 70-160 μM with a lower detection limit of 0.38 μM (S/N = 3) are obtained. This method is used to detect cholesterol in human serum successfully. Especially, it can be applied to the rough quantification of membrane cholesterol in living tumor cells, indicating that it has the potential for clinical application.

Different Dimensional Copper-Based Metal-Organic Frameworks with Enzyme-Mimetic Activity for Antibacterial Therapy

Fighting against bacterial infection and accelerating wound healing remain important and challenging in infected wound care. Metal-organic frameworks (MOFs) have received much attention for their optimized and enhanced catalytic performance in different dimensions of these challenges. The size and morphology of nanomaterials are important in their physiochemical properties and thereby their biological functions. Enzyme-mimicking catalysts, based on MOFs of different dimensions, display varying degrees of peroxidase (POD)-like activity toward hydrogen peroxide (H₂O₂) decomposition into toxic hydroxyl radicals (•OH) for bacterial inhibition and accelerating wound healing. In this study, we investigated the two most studied representatives of copper-based MOFs (Cu-MOFs), three-dimensional (3D) HKUST-1 and two-dimensional (2D) Cu-TCPP, for antibacterial therapy. HKUST-1, with a uniform and octahedral 3D structure, showed higher POD-like activity, resulting in H₂O₂ decomposition for •OH generation rather than Cu-TCPP. Because of the efficient generation of toxic •OH, both Gram-negative Escherichia coli and Gram-positive methicillin-resistant Staphylococcus aureus could be eliminated under a lower concentration of H₂O₂. Animal experiments indicated that the as-prepared HKUST-1 effectively accelerated wound healing with good biocompatibility. These results reveal the multivariate dimensions of Cu-MOFs with high POD-like activity, providing good potential for further stimulation of specific bacterial binding therapies in the future.

Metal organic framework-based antibacterial agents and their underlying mechanisms

Bacteria, as the most abundant living organisms, have always been a threat to human life until the development of antibiotics. However, with the wide use of antibiotics over a long time, bacteria have gradually gained tolerance to antibiotics, further aggravating threat to human beings and environmental safety significantly. In recent decades, new bacteria-killing methods based on metal ions, hyperthermia, free radicals, physical pricks, and the coordination of several multi-mechanisms have attracted increasing attention. Consequently, multiple types of new antibacterial agents have been developed. Among them, metal organic frameworks (MOFs) appear to play an increasingly important role. The unique characteristics of MOFs make them suitable multiple-functional platforms. By selecting the appropriate metastable coordination bonds, MOFs can act as reservoirs and release antibacterial metal ions or organic linkers; by constructing a porous structure, MOFs can act as carriers for multiple types of agents and achieve slow and sustained release; and by designing their composition and the pore structure precisely, MOFs can be endowed with properties to produce heat and free radicals under stimulation. Importantly, in combination with other materials, MOFs can act as a platform to kill bacteria effectively through the synergistic effect of multiple types of mechanisms. In this review, we focus on the recent development of MOF-based antibacterial agents, which are classified according to their antibacterial mechanisms.

Copper-based metal-organic frameworks for biomedical applications

Metal-organic frameworks (MOFs) are a class of important porous, crystalline materials composed of metal ions (clusters) and organic ligands. Owing to the unique redox chemistry, photochemical and electrical property, and catalytic activity of Cu^2+/+, copper-based MOFs (Cu-MOFs) have been recently and extensively explored in various biomedical fields. In this review, we first make a brief introduction to the synthesis of Cu-MOFs and their composites, and highlight the recent synthetic strategies of two most studied representatives, three-dimensional HKUST-1 and two-dimensional Cu-TCPP. The recent advances of Cu-MOFs in the applications of cancer treatment, bacterial inhibition, biosensing, biocatalysis, and wound healing are summarized and discussed. Furthermore, we propose a prospect of the future development of Cu-MOFs in biomedical fields and beyond.

Label-free fluorescence detection of hydrogen peroxide and glucose based on the Ni-MOF nanozyme-induced self-ligand emission

A bifunctional Ni-MOF nanosheet was synthesized and developed for label-free fluorescent detection of H₂O₂ and glucose. The Ni-MOF exhibited intrinsic peroxidase-like activity and its catalytic activity was demonstrated to be originated from the hydroxyl radicals (•OH) produced in catalytic process. Since the generated •OH enabled terephthalic acid, the non-fluorescent organic ligand of Ni-MOF, to form a strongly fluorescent 2-hydroxy terephthalic acid, the Ni-MOF nanozyme was endowed with dual-function properties of mimicking peroxidase and emitting fluorescence. Based on this bifunctional Ni-MOF nanozyme, the proposed label-free fluorescence sensing strategy was applied to detecting H₂O₂ and glucose with wide linear ranges of 0.1-20 mM and 8-30 μM, and low detection limits of 4.0 × 10^-5 M and 4.0 × 10^-6 M, respectively. Furthermore, the bifunctional Ni-MOF-based label-free sensing platform was successfully used for the glucose detection in human serum samples, showing good reproducibility and high accuracy. This strategy provides a green and sensitive method for the determination of small biomolecules in practical applications by the combination of enzyme cascade reaction.

Prussian Blue Nanoparticle Supported MoS2 Nanocomposites as a Peroxidase-Like Nanozyme for Colorimetric Sensing of Dopamine

An abnormal level of dopamine (DA) is usually related to neurological disorders, including Parkinson's disease. Herein, cubic-shaped, Prussian blue nanoparticle-supported MoS2 nanocomposites (MoS2-CPBNPs) were prepared as peroxidase-like nanozymes for the label-free, colorimetric detection of DA. As expected, the as-prepared MoS2-CPBNPs nanozymes have outstanding peroxidase-like mimicking activity, which can catalyze 3,3',5,5'-Tetramethylbenzidine (TMB) to generate blue, oxidized TMB in the presence of hydrogen peroxide (H2O2). DA can inhibit the oxidation of TMB, which causes blue solutions to fade and become colorless. According to this phenomenon, the developed colorimetric sensor can qualitatively and quantitatively analyze DA ranging from 0 to 300 μM with a detection limit of 0.09 μM. In addition, the high recovery and low relative standard deviation for practical DA determination suggested that this colorimetric sensor has potential for application in biological biosensing and diagnostic fields.

Ultra-sensitive detection of florfenicol by flow injection chemiluminescence immunoassay based on Nickel/Cobalt bimetallic metal-organic framework nanozymes

The emergence and progress of metal-organic frameworks (MOFs) with high stability, large surface area, and abundant unsaturated active sites, once again promote the development of nanozymes, making nanozymes more advantageous to replace natural enzymes and will increase the applications of chemiluminescence immunoassay. In this study, a flow injection chemiluminescence immunoassay based on Ni/Co metal-organic framework (Ni/Co-MOF) nanozymes was developed, which can quickly and highly sensitively detect florfenicol (FF) in animal-derived food residues. Ni/Co-MOF_0.75 nanospheres can not only form stable immune probes with antibodies but also act as nanozymes to efficiently catalyze H₂O₂ for amplifying the chemiluminescence signal of the luminol-H₂O₂ system. In addition, due to good biocompatibility and large specific surface area, carboxyl-modified resin beads are used as a suitable material for loading more coating antigens. Based on the principle of competitive immunity, FF standard solution will compete with coating antigen loaded on the carboxyl resin beads for the limited binding sites on the FF antibody. Under the best experimental conditions, the detection range of FF is 0.0001-1000 ng mL^-1, and the detection limit (LOD) is 0.033 pg mL^-1 (S/N = 3). Furthermore, this method has been successfully applied to the analysis of actual samples with satisfactory results, which will provide a certain reference for the detection of small molecules in food and environmental analysis.

Chemiluminescent magnetic nanoparticles with good catalytic activity and rapid separation capability and sensitive sensing for H2O2

It is of considerable importance to develop chemiluminescent functionalized nanomaterials (CF-NMs) with good catalytic activity, high chemiluminescence (CL) efficiency and good stability, and rapid magnetic separation capability, achieving excellent performance in CL biosensing. In this study, N-(4-aminobutyl)-N-ethylisoluminol (ABEI)-functionalized CuFe2O4 magnetic nanomaterial (ABEI/CuFe2O4) with high catalytic activity was synthesized by virtue of a solvothermal and post-functionalization method. ABEI/CuFe2O4 showed outstanding CL properties, superior to ABEI-CuFe2O4 in liquid phase. This reveals that the immobilization of ABEI on the surface of CuFe2O4 exhibits unique heterogeneous catalytic property. The catalytic ability of CuFe2O4 was better than that of CoFe2O4, ZnFe2O4, MnFe2O4, and NiFe2O4. It is suggested that the peroxide-like activity as well as Cu2+ and Cu0 enriched on the surface of ABEI/CuFe2O4 opened up a dual route for synergistic catalysis of H2O2. ABEI/CuFe2O4 also demonstrated good superparamagnetism and magnetic separation could be carried out in 2 min, which is advantageous for the separation and purification of ABEI/CuFe2O4 during the synthetic procedures and bioassays. Owing to the sensitive response of ABEI/CuFe2O4 to H2O2, an enzyme-free sensor was developed for the detection of H2O2 with a wide linear range over 5 orders of magnitude of H2O2 concentrations and a low detection limit of 5.6 nM. The as-developed sensor is sensitive, stable, and convenient. This work provides a new family member of nanomaterials with good magnetism and CL activity as well as good stability. The developed ABEI/CuFe2O4 shows great prospects in biocatalysis, bioassays, biosensing, and bioimaging, etc.