Construction of polythiophene-derivative films as a novel electrochemical sensor for highly sensitive detection of nitrite

Molecularly imprinted Photoelectrochemical sensor for Escherichia coli based on Cu:ZIF-8/KZ3TTz heterojunction

Herein, a signal stable molecularly imprinted photoelectrochemical (MIP-PEC) sensing platform was designed to sensitively detect Escherichia coli by incorporating polythiophene film with Cu: ZIF-8/KZ3TTz heterojunction. Attributed to the formation of a staggered type II heterostructure between KZ3TTz and Cu: ZIF-8 semiconductors, the Cu: ZIF-8/KZ3TTz heterojunction exhibited stable and significant cathode PEC response. Impressively, selective MIP film was grown on the surface of Cu: ZIF-8/KZ3TTz/GCE by electro-polymerization of 2,2-Dimethyl-5-(3-thienyl)-1,3-dioxane-4,6-dione (DTDD) in the presence of E. coli. After removing E. coli, more electrons were transferred to the electrolyte solution through the imprinting cavity on the MIP film, which was eliminated by O2 in the electrolyte, causing further enhancement of the cathode PEC response. On the contrary, when the imprinted cavity was filled with E. coli, the cathodic PEC response gradually decreased due to steric hindrance effect. The sensor showed excellent linearity in the range of 101 to 108 CFU/mL with a detection limit of 4.09 CFU/mL (S/N = 3). This strategy offered a novel approach for pathogenic bacteria detection in food safety and environmental monitoring.

Comparison of the analytical performance of two different electrochemical sensors based on a composite of gold nanorods with carbon nanomaterials and PEDOT:PSS for the sensitive detection of nitrite in processed meat products

Herein, two platforms for electrochemical sensors were developed based on a combination of gold nanorods (AuNRs) with electrochemically reduced graphene oxide (ErGO) or with multiwalled carbon nanotubes (MWCNTs) and PEDOT:PSS for nitrite detection. The first and second electrodes were denoted as AuNRs/ErGO/PEDOT:PSS/GCE and AuNRs/MWCNT/PEDOT:PSS/GCE, respectively. Both materials for electrode modifiers were then characterized using UV-Vis and Raman spectroscopy, SEM, and HR-TEM. In addition, both sensors exhibit good electrochemical and electroanalytical performance for nitrite detection when investigated using voltammetric techniques. The synergistic effect between the AuNRs and their composites enhanced the electrocatalytic activity toward nitrite oxidation compared with the unmodified electrode, and the electroanalytical performance of the second electrode was superior to the first electrode. This is because the high surface area and conductivity of the MWCNTs in the second electrode provide the highest electrochemically active area (0.1510 cm2) among the other electrodes. Moreover, the second electrode exhibited a higher value for the surface coverage and the diffusion coefficient than the first electrode for nitrite detection. The electroanalytical performances of the first and second electrode for nitrite detection in terms of concentration range are 0.8-100 μM and 0.2-100 μM, limit of detection (0.2 μM and 0.08 μM), and measurement sensitivity (0.0451 μA μM-1 cm-2 and 0.0634 μA μM-1 cm-2). Good selectivity was also shown from both sensors in the presence of NaCl, Na2SO4, Na3PO4, MgSO4, NaHCO3, NaNO3, glucose, and ascorbic acid as interfering species for nitrite detection. Furthermore, both sensors were employed to detect nitrite as a food preservative in the beef sample, and the results showed no significant difference compared with the spectrophotometric technique. These results indicate that both proposed nitrite sensors may be further applied as promising electrochemical sensing platforms for in situ nitrite detection.

Determination of nitrite in food based on its sensitizing effect on cathodic electrochemiluminescence of conductive PTH-DPP films

Herein, a novel strategy for electrochemiluminescence (ECL) detection of nitrite based on its sensitization effect on cathode ECL emission of 3,6-di(2-thienyl)-2,5-dihydropyrrolo [3,4-c] pyrrole-1,4-dione (TH-DPP) polymeric films (PTH-DPP) was formulated, by means of a one-step electropolymerization of TH-DPP with a short time on the glassy carbon electrode (GCE). It was shown that the PTH-DPP film-modified GCE exhibited a strong ECL response when S₂O₈^2- was used as a co-reactant. The ECL emission could be greatly enhanced by PTH-DPP with nitrite in a K₂S₂O₈/PBS solution system and occurred at a relatively lower potential in comparison with traditional cathode ECL emitter, leading to high sensitivity and good selectivity. The ECL sensor exhibits excellent linear relationship in the ranges of 0.3 to 100 μM and 100 to 1000 μM for nitrite detection, with an outstanding detection limit of 0.08 μM (S/N = 3). The ECL sensor provides an impressive outcome for the detection of practical samples.

An efficient aggregation-induced electrochemiluminescent immunosensor by using TiO2 nanoparticles as coreaction accelerator and energy donor for aflatoxin B1 detection

Herein, we fabricated a label-free ECL immunosensor for aflatoxin B₁ (AFB₁) detection. In this system, a small organic aggregation-induced electrochemiluminescence luminophore, 2,5-di-tetraphenylethylene-ylthiazolo [5,4-d] thiazole, was designed, named TPETTZ. Polyaniline-wrapped TiO₂ nanoparticles (PANI/TiO₂ NPs) complex was synthesized through one-step in situ oxidation polymerization of aniline, and performed excellent electrical conductivity and abundant amino groups. As an ECL accelerator, TiO₂ nanoparticles (TiO₂ NPs) promoted the oxidation of tri-n-propylamine (TPA) to generate more TPA^•; in addition, it also acted as a donor to improve the ECL intensity of TPETTZ (acceptor) through electrochemiluminescence resonance energy transfer (ECL-RET). Encouraged by the above, under the existence of TPA, TPETTZ displayed a strong and continuously stable ECL_anode signal due to the introduction of PANI/TiO₂ NPs. Therefore, the immunosensor was constructed for AFB₁ detection based on the quenching effect of target on the ECL signal, and a linearly decreasing ECL signal was obtained as the increasement of AFB₁ in the range of 75 fg/mL to 100 ng/mL, with a lower detection limit of 27.5 fg/mL. Moreover, the as-prepared sensing platform performed a satisfactory anti-interference, stability, and reproducibility, and appeared a good accuracy in walnut sample analysis, presenting a promising application in the future.