Towards quantitative point of care detection using SERS lateral flow immunoassays

Investigation of Melphalan interaction as an alkylating agent with nucleotides by using surface enhanced Raman spectroscopy (SERS)

SERS (Surface Enhanced Raman Spectroscopy) is a new Raman spectroscopy which relies on Surface Plasmon Resonance (SPR) of metal nanoparticles. We have applied colloidal silver and gold nanoparticles as amplifier agents to enhance nucleotide Raman signals. It is observed that without these enhancing agents, it is impossible to investigate nucleotide spectrum due to weak Raman signals. Interaction mechanism of Melphalan, an anticancer drug with four nucleotides (Adenine, Cytosine, Guanine, Thymine) was investigated using SERS to detect and identify changes due to alkylating process in Raman spectra. After incubating Melphalan drug with nucleotides for 24 h at 37 °C, some changes occurred in SERS spectrum and interpretation of SERS spectra revealed the influence of the alkyl substitution on peaks and Raman shifts. After incubation of Melphalan with each nucleotide, intensity of relevant SERS signals assigned to Amid III group of Cytosine and Amid I of Thymine decreased significantly, confirming alkylating taking place. In this study, we also investigated the effect of nanoparticles type on nucleotide spectrum. We could not obtain useful information in the cases of guanine nucleotide. The SERS spectrum of Cytosine as an example of nucleotides in aqueous solution compared to solid state and results demonstrated that in solid state better signals were obtained than in liquid state.

Antibody-Driven Assembly of Plasmonic Core-Satellites to Increase the Sensitivity of a SERS Vertical Flow Immunoassay

Here, we describe a SERS-based vertical flow assay as a platform technology suitable for point-of-care (POC) diagnostic testing. A capture substrate is constructed from filter paper embedded with spherical gold nanoparticles (AuNPs) and functionalized with an appropriate capture antibody. The capture substrate is loaded into a filtration device and connected to a syringe to rapidly and repeatedly pass the sample through the sensor for efficient antigen binding. The antigen is then labeled with a SERS-active detection probe. We show that only a few Raman reporter molecules, exclusively located adjacent to the plasmonic capture substrate, generate detectible signals. To maximize the signal from underutilized Raman reporter molecules, we employ a secondary signal enhancing probe that undergoes antibody-directed assembly to form plasmonic core-satellites. This facile enhancement step provides a 3.5-fold increase in the signal and a detection limit of 0.23 ng/mL (1.6 pM) for human IgG. This work highlights the potential to rationally design plasmonic architectures using widely available and reproducible spherical AuNPs to achieve large SERS enhancements for highly sensitive POC diagnostics.

An overview of influenza A virus detection methods: from state-of-the-art of laboratories to point-of-care strategies

Influenza A virus (IAV), a common respiratory infectious pathogen, poses a significant risk to personal health and public health safety due to rapid mutation and wide host range. To better prevent and treat IAV, comprehensive measures are needed for early and rapid screening and detection of IAV. Although traditional laboratory-based techniques are accurate, they are often time-consuming and not always feasible in emergency or resource-limited areas. In contrast, emerging point-of-care strategies provide faster results but may compromise sensitivity and specificity. Here, this review critically evaluates various detection methods for IAV from established laboratory-based procedures to innovative rapid diagnosis. By analyzing the recent research progress, we aim to address significant gaps in understanding the effectiveness, practicality, and applicability of these methods in different scenarios, which could provide information for healthcare strategies, guide public health response measures, and ultimately strengthen patient care in the face of the ongoing threat of IAV. Through a detailed comparison of diagnostic models, this review can provide a reliable reference for rapid, accurate and efficient detection of IAV, and to contribute to the diagnosis, treatment, prevention, and control of IAV.

Raman and Surface-Enhanced Raman Scattering Detection in Flowing Solutions for Complex Mixture Analysis

Raman scattering provides a chemical-specific and label-free method for identifying and quantifying molecules in flowing solutions. This review provides a comprehensive examination of the application of Raman spectroscopy and surface-enhanced Raman scattering (SERS) to flowing liquid samples. We summarize developments in online and at-line detection using Raman and SERS analysis, including the design of microfluidic devices, the development of unique SERS substrates, novel sampling interfaces, and coupling these approaches to fluid-based chemical separations (e.g., chromatography and electrophoresis). The article highlights the challenges and limitations associated with these techniques and provides examples of their applications in a variety of fields, including chemistry, biology, and environmental science. Overall, this review demonstrates the utility of Raman and SERS for analysis of complex mixtures and highlights the potential for further development and optimization of these techniques.

On-Site Fluorescent Detection of Sepsis-Inducing Bacteria using a Graphene-Oxide CRISPR-Cas12a (GO-CRISPR) System

Sepsis is an extremely dangerous medical condition that emanates from the body's response to a pre-existing infection. Early detection of sepsis-inducing bacterial infections can greatly enhance the treatment process and potentially prevent the onset of sepsis. However, current point-of-care (POC) sensors are often complex and costly or lack the ideal sensitivity for effective bacterial detection. Therefore, it is crucial to develop rapid and sensitive biosensors for the on-site detection of sepsis-inducing bacteria. Herein, we developed a graphene oxide CRISPR-Cas12a (GO-CRISPR) biosensor for the detection of sepsis-inducing bacteria in human serum. In this strategy, single-stranded (ssDNA) FAM probes were quenched with single-layer graphene oxide (GO). Target-activated Cas12a trans-cleavage was utilized for the degradation of the ssDNA probes, detaching the short ssDNA probes from GO and recovering the fluorescent signals. Under optimal conditions, we employed our GO-CRISPR system for the detection of Salmonella Typhimurium (S. Typhimurium) with a detection sensitivity of as low as 3 × 103 CFU/mL in human serum, as well as a good detection specificity toward other competing bacteria. In addition, the GO-CRISPR biosensor exhibited excellent sensitivity to the detection of S. Typhimurium in spiked human serum. The GO-CRISPR system offers superior rapidity for the detection of sepsis-inducing bacteria and has the potential to enhance the early detection of bacterial infections in resource-limited settings, expediting the response for patients at risk of sepsis.

Protein nanoscaffold enables programmable nanobody-luciferase immunoassembly for sensitive and simultaneous detection of aflatoxin B1 and ochratoxin A

Mycotoxins produced by fungi can contaminate various foods and pose significant health risks. Ensuring food safety demands rapid, highly sensitive analytical techniques. One-step Bioluminescent Enzyme Immunoassays (BLEIAs) employing nanobody-nanoluciferase fusion proteins have recently garnered attention for operational simplicity and heightened sensitivity. Nevertheless, fixed nanobody:nanoluciferase ratios in fusion proteins restrict the customization and sensitivity of traditional BLEIAs. In this study, we present a Scaffold Assembly-based BLEIA (SA-BLEIA) that overcomes these limitations through the programmable conjugation of nanobodies and luciferases onto 60-meric protein nanoscaffolds using SpyTag/SpyCatcher linkages. These nanoscaffolds facilitate the adjustable coupling of anti-aflatoxin B1 and anti-ochratoxin A nanobodies with luciferases, optimizing nanobody/luciferase ratios and diversifying specificities. Compared to conventional methods, SA-BLEIA demonstrates considerably elevated sensitivity for detecting both toxins. The elevated local concentration of luciferase significantly amplifies bioluminescence intensity, permitting reduced substrate consumption and cost-effective detection. The usage of dual-nanobody conjugates facilitates the quantification or simultaneous detection of both mycotoxins in a single test with shared reagents. The assay exhibits exceptional recovery rates in spiked cereal samples, strongly correlating with outcomes from commercial ELISA kits. Overall, this adaptable, highly sensitive, cost-effective, and multiplexed immunoassay underscores the potential of tunable scaffold assembly as a promising avenue for advancing bioanalytical diagnostic tools.

Recent advances in SERS-based immunochromatographic assay for pathogenic microorganism diagnosis: A review

Infectious diseases caused by bacteria, viruses, fungi, and other pathogenic microorganisms are among the most harmful public health problems in the world, causing tens of millions of deaths and incalculable economic losses every year. The establishment of rapid, simple, and highly sensitive diagnostic methods for pathogenic microorganisms is important for the prevention and control of infectious diseases, guidance of timely treatment, and the reduction of public safety risks. Lateral flow immunoassay (LFA) based on the colorimetric signal of colloidal gold is the most popular point-of-care testing technology at present, but it is limited by poor sensitivity and low throughput and hardly meets the needs of the highly sensitive screening of pathogenic microorganisms. In recent years, the combination of surface-enhanced Raman scattering (SERS) and LFA technology has developed into a novel analytical platform with high sensitivity and multiple detection capabilities and has shown great advantages in the detection of pathogenic microorganisms and infectious diseases. This review summarizes the working principle, design ideas, and application of the existing SERS-based LFA methods in pathogenic microorganism detection and further introduces the effect of new technologies such as Raman signal encoding, magnetic enrichment, novel membrane nanotags, and integrated Raman reading equipment on the performance of SERS-LFA. Finally, the main challenges and the future direction of development in this field of SERS-LFA are discussed.

Au@Ag Core-Shell Nanoparticles for Colorimetric and Surface-Enhanced Raman-Scattering-Based Multiplex Competitive Lateral Flow Immunoassay for the Simultaneous Detection of Histamine and Parvalbumin in Fish

Foodborne allergies and illnesses represent a major global health concern. In particular, fish can trigger life-threatening food allergic reactions and poisoning effects, mainly caused by the ingestion of parvalbumin toxin. Additionally, preformed histamine in less-than-fresh fish serves as a toxicological alert. Consequently, the analytical assessment of parvalbumin and histamine levels in fish becomes a critical public health safety measure. The multiplex detection of both analytes has emerged as an important issue. The analytical detection of parvalbumin and histamine requires different assays; while the determination of parvalbumin is commonly carried out by enzyme-linked immunosorbent assay, histamine is analyzed by high-performance liquid chromatography. In this study, we present an approach for multiplexing detection and quantification of trace amounts of parvalbumin and histamine in canned fish. This is achieved through a colorimetric and surface-enhanced Raman-scattering-based competitive lateral flow assay (SERS-LFIA) employing plasmonic nanoparticles. Two distinct SERS nanotags tailored for histamine or β-parvalbumin detection were synthesized. Initially, spherical 50 nm Au@Ag core-shell nanoparticles (Au@Ag NPs) were encoded with either rhodamine B isothiocyanate (RBITC) or malachite green isothiocyanate (MGITC). Subsequently, these nanoparticles were bioconjugated with anti-β-parvalbumin and antihistamine, forming the basis for our detection and quantification methodology. Additionally, our approach demonstrates the use of SERS-LFIA for the sensitive and multiplexed detection of parvalbumin and histamine on a single test line, paving the way for on-site detection employing portable Raman instruments.

Raman-Based Techniques in Medical Applications for Diagnostic Tasks: A Review

Raman spectroscopy is a widely developing approach for noninvasive analysis that can provide information on chemical composition and molecular structure. High chemical specificity calls for developing different medical diagnostic applications based on Raman spectroscopy. This review focuses on the Raman-based techniques used in medical diagnostics and provides an overview of such techniques, possible areas of their application, and current limitations. We have reviewed recent studies proposing conventional Raman spectroscopy and surface-enhanced Raman spectroscopy for rapid measuring of specific biomarkers of such diseases as cardiovascular disease, cancer, neurogenerative disease, and coronavirus disease (COVID-19). As a result, we have discovered several most promising Raman-based applications to identify affected persons by detecting some significant spectral features. We have analyzed these approaches in terms of their potentially diagnostic power and highlighted the remaining challenges and limitations preventing their translation into clinical settings.

Immunochromatographic enhancement strategy for SARS-CoV-2 detection based on nanotechnology

The global outbreak of coronavirus disease 2019 (COVID-19) has been catastrophic to both human health and social development. Therefore, developing highly reliable and sensitive point-of-care testing (POCT) for detecting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has become a priority. Among all available POCTs, the lateral flow immunoassay (LFIA, also known as immunochromatography) has proved to be effective due to its accuracy, portability, convenience, and speed. In areas with a scarcity of laboratory resources and medical personnel, the LFIA provides an affordable option for the diagnosis of COVID-19. This review offers a comprehensive overview of methods for improving the sensitivity of SARS-CoV-2 detection using immunochromatography based on nanotechnology, sorted according to the different detection targets (antigens, antibodies, and nucleic acids). It also looks into the performance and properties of the various sensitivity enhancement strategies, before delving into the remaining challenges in COVID-19 diagnosis through LFIA. Ultimately, it seeks to provide helpful guidance in selecting an appropriate strategy for SARS-CoV-2 immunochromatographic detection based on nanotechnology.

Nano-biosensor for SARS-CoV-2/COVID-19 detection: methods, mechanism and interface design

The epidemic of coronavirus disease 2019 (COVID-19) was a huge disaster to human society. The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which led to COVID-19, has resulted in a large number of deaths. Even though the reverse transcription-polymerase chain reaction (RT-PCR) is the most efficient method for the detection of SARS-CoV-2, the disadvantages (such as long detection time, professional operators, expensive instruments, and laboratory equipment) limit its application. In this review, the different kinds of nano-biosensors based on surface-enhanced Raman scattering (SERS), surface plasmon resonance (SPR), field-effect transistor (FET), fluorescence methods, and electrochemical methods are summarized, starting with a concise description of their sensing mechanism. The different bioprobes (such as ACE2, S protein-antibody, IgG antibody, IgM antibody, and SARS-CoV-2 DNA probes) with different bio-principles are introduced. The key structural components of the biosensors are briefly introduced to give readers an understanding of the principles behind the testing methods. In particular, SARS-CoV-2-related RNA mutation detection and its challenges are also briefly described. We hope that this review will encourage readers with different research backgrounds to design SARS-CoV-2 nano-biosensors with high selectivity and sensitivity.

Nanostructured biosensing platforms for the detection of food- and water-borne pathogenic Escherichia coli

Pathogenic bacterial infection is one of the principal causes affecting human health and ecosystems. The accurate identification of bacteria in food and water samples is of significant interests to maintain safety and health for humans. Culture-based tests are practically tedious and may produce false-positive results, while viable but non-culturable microorganisms (NCMs) cannot be retrieved. Thus, it requires fast, reliable, and low-cost detection strategies for on-field analysis and point-of-care (POC) monitoring. The standard detection methods such as nucleic acid analysis (RT-PCR) and enzyme-linked immunosorbent assays (ELISA) are still challenging in POC practice due to their time-consuming (several hours to days) and expensive laboratory operations. The optical (surface plasmon resonance (SPR), fluorescence, and surface-enhanced Raman scattering (SERS)) and electrochemical-based detection of microbes (early stage of infective diseases) have been considered as alternative routes in the emerging world of nanostructured biosensing since they can attain a faster and concurrent screening of several pathogens in real samples. Moreover, optical and electrochemical detection strategies are opening a new route for the ability of detecting pathogens through the integration of cellphones, which is well fitted for POC analysis. This review article covers the current state of sensitive mechanistic approaches for the screening and detection of Escherichia coli O157:H7 (E. coli) pathogens in food and water samples, which can be potentially applied in clinical and environmental monitoring.

Label-Free Saliva Test for Rapid Detection of Coronavirus Using Nanosensor-Enabled SERS

The recent COVID-19 pandemic has highlighted the inadequacies of existing diagnostic techniques and the need for rapid and accurate diagnostic systems. Although molecular tests such as RT-PCR are the gold standard, they cannot be employed as point-of-care testing systems. Hence, a rapid, noninvasive diagnostic technique such as Surface-enhanced Raman scattering (SERS) is a promising analytical technique for rapid molecular or viral diagnosis. Here, we have designed a SERS- based test to rapidly diagnose SARS-CoV-2 from saliva. Physical methods synthesized the nanostructured sensor. It significantly increased the detection specificity and sensitivity by ~ten copies/mL of viral RNA (~femtomolar concentration of nucleic acids). Our technique combines the multiplexing capability of SERS with the sensitivity of novel nanostructures to detect whole virus particles and infection-associated antibodies. We have demonstrated the feasibility of the test with saliva samples from individuals who tested positive for SARS-CoV-2 with a specificity of 95%. The SERS-based test provides a promising breakthrough in detecting potential mutations that may come up with time while also preparing the world to deal with other pandemics in the future with rapid response and very accurate results.

Analysis of Nanostar Reshaping Kinetics for Optimal Substrate Fabrication

Gold nanostars (NS) are emerging as a versatile tool in surface-enhanced Raman scattering (SERS) applications because of their wide localized surface plasmon resonance (LSPR) tunability, simple synthesis procedure, and high SERS enhancement. These particles are commonly used in solutions with a stabilizing coating shell (e.g., thiolated molecules or silver shell). However, coatings cannot be used for the fabrication of SERS substrates as the NS have to interact with the substrate planar surface. Without coating, NS have been observed to change over time, leading to a hypochromic shift of the LSPR. To understand this shift, we synthesized surfactant-free gold NS with different spike morphologies and investigated their reshaping morphology and kinetics. Using TEM, the NS sharp spike features were observed to reshape over time. The kinetics of this process were analyzed and determined by monitoring the LSPR, which was observed to follow an exponential decay over time. We used an empirical fit for the LSPR-shift data as a function of time, which permits to predict the LSPR at a specific time based only on the initial LSPR (independently of the initial spike morphology). We show the effect of the LSPR on the SERS signal for the NS and how the SERS signal correlated to our prediction. Finally, we evaluated our approach by fabricating SERS substrates with immobilized NS and collecting the reflectance spectra. We were able to predict the substrate LSPR and aim for an optimal LSPR with an average 3% deviation. These new insights on NS reshaping can permit the fabrication of NS-based substrates with desirable optical/plasmonic properties.

The Role of Surface Enhanced Raman Scattering for Therapeutic Drug Monitoring of Antimicrobial Agents

The rapid quantification of antimicrobial agents is important for therapeutic drug monitoring (TDM), enabling personalized dosing schemes in critically ill patients. Highly sophisticated TDM technology is becoming available, but its implementation in hospitals is still limited. Among the various proposed techniques, surface-enhanced Raman scattering (SERS) stands out as one of the more interesting due to its extremely high sensitivity, rapidity, and fingerprinting capabilities. Here, we present a comprehensive review of various SERS-based novel approaches applied for direct and indirect detection and quantification of antibiotic, antifungal, and antituberculosis drugs in different matrices, particularly focusing on the challenges for successful exploitation of this technique in the development of assays for point-of-care tests.