Modification of the surface of integrated optical wave-guide sensors for immunosensor applications

Application of Highly Sensitive Immunosensor Based on Optical Waveguide Light-Mode Spectroscopy (OWLS) Technique for the Detection of the Herbicide Active Ingredient Glyphosate

The herbicide active ingredient glyphosate is the most widely applied herbicidal substance worldwide. Currently it is the market-leading pesticide, and its use is projected to further grow 4.5-fold between 2022 and 2029. Today, glyphosate use exceeds one megaton per year worldwide, which represents a serious environmental burden. A factor in the overall boost in the global use of glyphosate has been the spread of glyphosate-tolerant genetically modified (GM) crops that allow post-emergence applications of the herbicide on these transgenic crops. In turn, cultivation of glyphosate-tolerant GM crops represented 56% of the glyphosate use in 2019. Due to its extremely high application rate, xenobiotic behaviour and a water solubility (11.6 mg/mL at 25 °C) unusually high among pesticide active ingredients, glyphosate has become a ubiquitous water pollutant and a primary drinking water contaminant worldwide, presenting a threat to water quality. The goal of our research was to develop a rapid and sensitive method for detecting this herbicide active ingredient. For this purpose, we applied the novel analytical biosensor technique optical waveguide light-mode spectroscopy (OWLS) to the label-free detection of glyphosate in a competitive immunoassay format using glyphosate-specific polyclonal antibodies. After immobilising the antigen conjugate in the form of a glyphosate conjugated to human serum albumin for indirect measurement, the sensor chip was used in a flow-injection analyser system. For the measurements, an antibody stock solution was diluted to 2.5 µg/mL. During the measurement, standard solutions were mixed with the appropriate concentration of antibodies and incubated for 1 min before injection. The linear detection range and the EC50 value of the competitive detection method were between 0.01 and 100 ng/mL and 0.60 ng/mL, respectively. After investigating the indirect method, we tested the cross-reactivity of the antibody with glyphosate and structurally related compounds.

Development of an Immunofluorescent Capillary Sensor for the Detection of Zearalenone Mycotoxin

A capillary-based immunofluorescence sensor was developed and incorporated in a flow injection analysis system. The light-guiding capillary was illuminated axially by a 473 nm/5 mW solid state laser through a tailored optofluidic connector. High sensitivity of the system was achieved by efficiently collecting and detecting the non-guided fluorescence signal scattered out along the wall of the capillary. The excitation was highly suppressed with bandpass and dichroic filters by simultaneously exploiting the guiding effect inside the capillary. The glass capillary used as a measuring cell was silanized in liquid phase by 3-aminopropyltriethoxysilane (APTS), and the biomolecules were immobilized using glutaraldehyde inside the capillary. The applicability of the developed system was tested with a bovine serum albumin (BSA)-anti-BSA-IgG model-molecule pair, using a fluorescently labeled secondary antibody. Based on the results of the BSA-anti-BSA experiments, a similar setup using a primary antibody specific for zearalenone (ZON) was established, and a competitive fluorescence measurement system was developed for quantitative determination of ZON. For the measurements, 20 µg/mL ZON-BSA conjugate was immobilized in the capillary, and a 1:2500 dilution of the primary antibody stock solution and a 2 µg/mL secondary antibody solution were set. The developed capillary-based immunosensor allowed a limit of detection (LOD) of 0.003 ng/mL and a limit of quantification (LOQ) of 0.007 ng/mL for ZON in the competitive immunosensor setup, with a dynamic detection range of 0.01-10 ng/mL ZON concentrations.

Direct and Competitive Optical Grating Immunosensors for Determination of Fusarium Mycotoxin Zearalenone

Novel optical waveguide lightmode spectroscopy (OWLS)-based immunosensor formats were developed for label-free detection of Fusarium mycotoxin zearalenone (ZON). To achieve low limits of detection (LODs), both immobilised antibody-based (direct) and immobilised antigen-based (competitive) assay setups were applied. Immunoreagents were immobilised on epoxy-, amino-, and carboxyl-functionalised sensor surfaces, and by optimising the immobilisation methods, standard sigmoid curves were obtained in both sensor formats. An outstanding LOD of 0.002 pg/mL was obtained for ZON in the competitive immunosensor setup with a dynamic detection range between 0.01 and 1 pg/mL ZON concentrations, depending on the covalent immobilisation method applied. This corresponds to a five orders of magnitude improvement in detectability of ZON relative to the previously developed enzyme-linked immonosorbent assay (ELISA) method. The selectivity of the immunosensor for ZON was demonstrated with structural analogues (α-zearalenol, α-zearalanol, and β-zearalanol) and structurally unrelated mycotoxins. The method was found to be applicable in maize extract using acetonitrile as the organic solvent, upon a dilution rate of 1:10,000 in buffer. Thus, the OWLS immunosensor method developed appears to be suitable for the quantitative determination of ZON in aqueous medium. The new technique can widen the range of sensoric detection methods of ZON for surveys in food and environmental safety assessment.

Plasmon-enhanced two-channel in situ Kretschmann ellipsometry of protein adsorption, cellular adhesion and polyelectrolyte deposition on titania nanostructures

Plasmon-enhanced in situ spectroscopic ellipsometry was realized using the Kretschmann geometry. A 10-μL flow cell was designed for multi-channel measurements using a semi-cylindrical lens. Dual-channel monitoring of the layer formation of different organic structures has been demonstrated on titania nanoparticle thin films supported by gold. Complex modeling capabilities as well as a sensitivity of ~40 pg/mm² with a time resolution of 1 s was achieved. The surface adsorption was enhanced by the titania nanoparticles due to the larger specific surface and nanoroughness, which is consistent with our previous results on titanate nanotubes.

High-sensitivity optical biosensor based on cascaded Mach-Zehnder interferometer and ring resonator using Vernier effect

We demonstrate an ultrahigh sensitivity silicon photonic biosensor based on cascaded Mach-Zehnder interferometer (MZI) and ring resonator with the Vernier effect using wavelength interrogation. Experimental results show that the sensitivities reached 2870 nm/RIU and 21,500 nm/RIU for MZI sensor and MZI-ring sensor, respectively. A biosensing application was demonstrated by monitoring the interaction between goat and antigoat immunoglobulin G (IgG) pairs. The measured results show that 1 ng/ml IgG resulted in 0.035 nm and 0.5 nm wavelength shift for MZI sensor and MZI-ring sensor, respectively. This high performance sensor is promising for medical diagnostic applications.

Sample handling in surface sensitive chemical and biological sensing: a practical review of basic fluidics and analyte transport

This paper gives an overview of the advantages and associated caveats of the most common sample handling methods in surface-sensitive chemical and biological sensing. We summarize the basic theoretical and practical considerations one faces when designing and assembling the fluidic part of the sensor devices. The influence of analyte size, the use of closed and flow-through cuvettes, the importance of flow rate, tubing length and diameter, bubble traps, pressure-driven pumping, cuvette dead volumes, and sample injection systems are all discussed. Typical application areas of particular arrangements are also highlighted, such as the monitoring of cellular adhesion, biomolecule adsorption-desorption and ligand-receptor affinity binding. Our work is a practical review in the sense that for every sample handling arrangement considered we present our own experimental data and critically review our experience with the given arrangement. In the experimental part we focus on sample handling in optical waveguide lightmode spectroscopy (OWLS) measurements, but the present study is equally applicable for other biosensing technologies in which an analyte in solution is captured at a surface and its presence is monitored. Explicit attention is given to features that are expected to play an increasingly decisive role in determining the reliability of (bio)chemical sensing measurements, such as analyte transport to the sensor surface; the distorting influence of dead volumes in the fluidic system; and the appropriate sample handling of cell suspensions (e.g. their quasi-simultaneous deposition). At the appropriate places, biological aspects closely related to fluidics (e.g. cellular mechanotransduction, competitive adsorption, blood flow in veins) are also discussed, particularly with regard to their models used in biosensing.

Comparative determination of two probiotics by QCM and OWLS-based immunosensors

The regular consumption of foods containing probiotic bacteria has beneficial physiological effects on the health and the digestion system. There is a need for novel analytical approaches for the determination of these bacteria that are faster than the classical plate counting method. For this purpose, two label-free biosensors were investigated and presented in this paper: Quartz Crystal Microbalance (QCM) and Optical Waveguide Lightmode Spectroscopy (OWLS) based direct immunosensors were developed for real-time direct detection of probiotic bacteria in fermented dairy products. Bifidobacterium bifidum O1356 and Lactobacillus acidophilus O1132 were detected by polyclonal anti-B. bifidum IgG and anti-L. acidophilus IgG immobilized on the sensors' surface. Sulfo-LC-SPDP cross linking agent was used to bind antibodies to the gold surface of the QCM's AT-cut quartz wafer. Concerning OWLS, antibodies were covalently bound to the amino groups of the silanized surface of the waveguide by glutaraldehyde. The dynamic measuring range was found between 1.0E+3 and 5.0E+5CFUmL(-1) in 100 fold diluted fermented milk products by QCM and with OWLS. Considering the current legislation of the probiotic content in probiotic products, the two developed immunosensors can be applied for rapid quantification of L. acidophilus and B. bifidum in fermented milk. These examinations offer effective alternatives to the microbiological plate counting method.

Optical waveguide lightmode spectroscopic techniques for investigating membrane-bound ion channel activities

Optical waveguide lightmode spectroscopic (OWLS) techniques were probed for monitoring ion permeation through channels incorporated into artificial lipid environment. A novel sensor set-up was developed by depositing liposomes or cell-derived membrane fragments onto hydrophilic polytetrafluoroethylene (PTFE) membrane. The fibrous material of PTFE membrane could entrap lipoid vesicles and the water-filled pores provided environment for the hydrophilic domains of lipid-embedded proteins. The sensor surface was kept clean from the lipid holder PTFE membrane by a water- and ion-permeable polyethylene terephthalate (PET) mesh. The sensor set-up was tested with egg yolk lecithin liposomes containing gramicidin ion channels and with cell-derived membrane fragments enriched in GABA-gated anion channels. The method allowed monitoring the move of Na⁺ and organic cations through gramicidin channels and detecting the Cl^–-channel functions of the (α₅β₂γ₂) GABA_A receptor in the presence or absence of GABA and the competitive GABA-blocker bicuculline.

Preparation of extracellular domain 3 of human VEGF receptor-2 and the monitoring of its real-time binding to VEGF by biosensors

Vascular endothelial growth factor receptor-2 (VEGFR-2) plays an important role in stimulating the proliferation of endothelial cells and improving the permeability of blood vessels, which is involved in tumor angiogenesis, a process that is essential for tumor growth and metastasis. In this study, we describe a method for high yield of recombinant extracellular domain 3 (KDR3) of human VEGFR-2 in an Escherichia coli system with further purification by cation exchange chromatography and immobilized metal affinity chromatography (IMAC). The biological activity of recombinant KDR3 was performed by sequestering VEGF in HUVEC proliferation assay. The real-time binding of human VEGF to immobilized KDR3 was monitored by a label-free biosensor, Optical waveguide lightmode spectroscopy (OWLS). Under the given experimental conditions, the association rate constant k(a) was 4.2 x 10(3) M(-1) s(-1) and the dissociation rate k(d) was 5.1 x 10(-3) s(-1). The dissociation constant K(D) was then calculated to be 1.2 x 10(-6) M. The obtained values will serve as baseline parameters for the design of improved versions of recombinant soluble VEGF receptors and the evaluation of developed anti-KDR antibodies. In addition, such a scenario established by the use of OWLS will potentiate the kinetic study of ligand/receptor and antigen/antibody. The receptor discussed here, which block VEGF binding to cell membrane KDR, have potential clinical application in the treatment of cancer and other diseases where pathological angiogenesis is involved.

Optical waveguide light-mode spectroscopy immunosensors for environmental monitoring

Coupling the high specificity of the immunoanalytical reaction with the high sensitivity of optical waveguide light-mode spectroscopy (OWLS) detection gives the possibility to develop immunosensors with in most cases a definitely lower detection limit than traditionally used immunoassays. Measurements were performed on the sensitized surface of optical waveguide grating coupler sensors (2400 lines/mm grating). The OWLS technique is based on the precise measurement of the resonance angle of a polarized laser light (632.8 nm), diffracted by a grating and incoupled into a thin waveguide. The effective refractive index, determined from the resonance incoupling angle detected at high accuracy, allows determination of layer thickness and coverage (or mass) of the adsorbed or bound material with ultrahigh sensitivity. OWLS immunosensors were developed as label-free immunosensors with an amino group modified SiO(2)-TiO(2) sensor surface on which the immunoreactants could be anchored. One of the components of the antibody-antigen complex was chemically bound on the sensor surface, allowing noncompetitive or competitive detection of the analytes. To illustrate that the resulting immunosensors are suitable for the determination of small and large molecular weight analytes, OWLS sensor formats were applied for quantitative detection of a herbicide active ingredient trifluralin, a Fusarium mycotoxin zearalenone, and an egg yolk protein of key importance in endocrine regulation, vitellogenin.

Biotinylation of TiO(2) nanoparticles and their conjugation with streptavidin

Photoactive TiO(2) can be used to mediate a variety of disinfection processes. It was postulated that TiO(2) particles could be directed to specific targets of interest using biotin/streptavidin linkages. Biotinylated TiO(2) nanoparticles (anatase) were obtained by treating TiO(2) nanoparticles with 3-aminopropyltriethoxysilane (APTS) in anhydrous DMSO, followed by reaction with N-hydroxysuccinimidobiotin. 29Si CP-MAS NMR, 13C CP-MAS NMR, and FTIR spectra showed that biotin was covalently bound to the TiO(2) surface. Transmission electron microscopy (TEM) demonstrated that prolonging the silanization reaction times led to increasingly thick silsesquioxane coating layers of up to approximately 10 nm. The specific surface area (SSA) of the TiO2 particles decreased from 16 m(2) g(-1) before treatment to 9.1 m(2) g(-1) after aminosilanization and to 8.4 m(2) g(-)1 after biotinylation, as measured by nitrogen adsorption. Amino surfaces modified for 4, 16, and 26 h had total amino group densities ranging from 2.9 to 26 to 66 nm(-2), respectively, whereas accessible surface amino group densities ranged from 2.7 to 10 to 17 nm(-2) as shown from nitrogen adsorption, polyelectrolyte titration, conductometric titration, and biotin assays. Not all the amino groups were accessible for biotinylation: the densities of active biotin were found to be 2.1, 7.0, and 11.5 nm(-2). The ability of the attached biotin to bind to streptavidin was demonstrated by confocal microscopy with the use of fluorescently labeled streptavidin-FITC. Although streptavidin was readily able to bind to biotinylated TiO(2) particles, it did not act as a strong flocculating agent for the biotinylated TiO2 particles. The implications of these observations, with respect to particle accessibility to tethered streptavidin, are discussed.

Development of immunosensor based on OWLS technique for determining Aflatoxin B1 and Ochratoxin A

Mycotoxins are toxic secondary metabolites produced by a number of different fungi, and can be present in a wide range of food and feed commodities including cereal grains, oil seeds, dried fruits, apple juice, wine and meat products from animals fed contaminated meal. Many mycotoxins are highly resistant, and survive food processing, and therefore enter the food chain and provide a threat to human health. The optical waveguide lightmode spectroscopy (OWLS) technique has been applied to the detection of Aflatoxin and Ochratoxin in both competitive and in direct immunoassays. After immobilizing the antibody or antigen conjugate for the direct or indirect measurement, respectively, the sensor chip was used in flow-injection analyser (FIA) system. When using non-competitive method, sensor responses were obtained first only at analyte concentrations of 5-10 ng ml(-1). In both cases, the responses were very unstable. For competitive sensor investigation with the sensitized chip first the optimal dilution rate of monoclonal antibodies was determined, for the measurement of Ochratoxin A and Aflatoxin B1 the monoclonal antibody stock solution was diluted to 1 microg ml(-1) and to a 1:400 dilution, respectively. During the competitive measurement standard solutions were mixed with monoclonal antibodies at the appropriate concentration, the mixture was incubated for 1 min and injected into the OWLS system. The sensitive detection range of the competitive detection method was between 0.5 and 10 ng ml(-1) in both cases. After the establishment of the indirect method, barley and wheat flour samples were measured, and the results were in good correlation by those measured by enzyme linked immuno-sorbent assay (ELISA). Regression coefficient between the two methods for Ochratoxin and Aflatoxin was determined as 0.96 and 0.89, respectively.

Recent developments in bio-molecular electronics techniques for food pathogens

Food borne illnesses contribute to the majority of infections caused by pathogenic microorganisms. Detection of these pathogens originating from different sources has led to increased interest of researchers. New bio-molecular techniques for food pathogen detection are being developed to improve the sensor characteristics such as sensitivity, reusability, simplicity and economic viability. Present article deals with the various methods of food pathogen detection with special emphasis on bio-molecular electronics techniques such as biosensors, microarrays, electronic nose, and nano-materials based methods.

DNA and protein microarray printing on silicon nitride waveguide surfaces

Sputtered silicon nitride optical waveguide surfaces were silanized and modified with a hetero-bifunctional crosslinker to facilitate thiol-reactive immobilization of contact-printed DNA probe oligonucleotides, streptavidin and murine anti-human interleukin-1 beta capture agents in microarray formats. X-ray photoelectron spectroscopy (XPS) was used to characterize each reaction sequence on the native silicon oxynitride surface. Thiol-terminated DNA probe oligonucleotides exhibited substantially higher surface printing immobilization and target hybridization efficiencies than non-thiolated DNA probe oligonucleotides: strong fluorescence signals from target DNA hybridization supported successful DNA oligonucleotide probe microarray fabrication and specific capture bioactivity. Analogously printed arrays of thiolated streptavidin and non-thiolated streptavidin did not exhibit noticeable differences in either surface immobilization or analyte capture assay signals. Non-thiolated anti-human interleukin-1 beta printed on modified silicon nitride surfaces reactive to thiol chemistry exhibited comparable performance for capturing human interleukin-1 beta analyte to commercial amine-reactive microarraying polymer surfaces in sandwich immunoassays, indicating substantial non-specific antibody-surface capture responsible for analyte capture signal.

Surface characterization of 3-glycidoxypropyltrimethoxysilane films on silicon-based substrates

Silane coupling agents are commonly used to activate surfaces for subsequent immobilization of biomolecules. The homogeneity and surface morphology of silane films is important for controlling the structural order of immobilized single-stranded DNA probes based on oligonucleotides. The surfaces of silicon wafers and glass slides with covalently attached 3-glycidoxypropyltrimethoxysilane (GOPS) have been characterized by using angularly dependent X-ray photoelectron spectroscopy (XPS), time-of-flight secondary-ion mass spectrometry (ToF-SIMS), atomic force microscopy (AFM), scanning electron microscopy (SEM), and monochromatic and spectroscopic ellipsometry. XPS and ToF-SIMS data provided evidence of complete surface coverage by GOPS. Data from angularly resolved XPS and ellipsometry methods suggested that the GOPS films were of monolayer thickness. AFM and SEM data indicated the presence of films that consisted of nodules approximately 50-100 nm in diameter. Modeling suggested that the nodules may lead to a nanoscale structural morphology that might influence the hybridization kinetics and thermodynamics of immobilized oligonucleotides.

Continuous flow immunosensor for highly selective and real-time detection of sub-ppb levels of 2-hydroxybiphenyl by using surface plasmon resonance imaging

A biosensor based on surface plasmon resonance (SPR) is developed for the detection of 2-hydroxybiphenyl (HBP). A monoclonal antibody against HBP (abbreviated hereafter as HBP-mAb) is developed and used for the detection of HBP by competitive SPR-based immunoassay and enzyme linked immunosorbent assay (ELISA) methods. A novel HBP-hapten compound, HBP-bovine serum albumin conjugate (HBP-BSA), derived by binding several HBP units with BSA by an aliphatic chain spacer is used in the development of antibody and for the functionalization of immunoprobes. HBP-BSA linked to the Au surface of the SPR sensor chip undergoes inhibitive immunoreaction with HBP-mAb in the presence of free HBP. The SPR-based immunoassay provides a rapid determination (response time: approximately 20 min) of the concentration of HBP in the range of 0.1-1000 ppb (ng/ml). Regeneration of the sensor chip is gained by treating the antibody-anchored SPR sensor chip with a pepsin solution (100 ppm (microg/ml); pH 2.0) for few minutes. The SPR sensor chip is reusable for the detection of HBP for more than 20 cycles with average loss of 0.35% reactivity per regeneration step. HBP concentration is determined as low as 0.1 and 3 ppb using the SPR sensor and ELISA measurements, respectively. The developed SPR sensor for HBP is free from interference by coexisting benzo[a]pyrene (BaP), 2,4-dichlorophenoxyacetic acid (2,4-D) and benz[a]anthracene; SPR angle shift obtained to the flow of HBP is almost same irrespective to the presence or absence of a same concentration of these carcinogenic polycyclic aromatic hydrocarbons together. The SPR sensor for HBP is proved to be applicable in simultaneous detection of HBP and BaP in parallel with another SPR sensor for BaP.