Influence of tara gum and xanthan gum on rheological and textural properties of starch-based gluten-free dough and bread

Development and characterization of gluten-free fried dough (magwinya) using sorghum flour

Magwinya, a deep-fried cereal dough, is usually produced using cake or bread wheat flour due to the naturally beneficial proteins found in wheat. In this study, sorghum flour, a gluten-free cereal grain, was used to produce magwinya. The aim was to develop and characterize gluten-free fried dough using sorghum flour. Xanthan and guar gum hydrocolloids were added to the sorghum flour in ratios of 0.5%, 1.0%, and 1.5% and 1.5%, 2.0%, and 2.5%, respectively, for magwinya production. The physicochemical characteristics of the magwinya were compared. The hardness of magwinya was significantly lower in sorghum: guar gum (SGG) samples due to their high moisture content. Ash and fiber content were also significantly higher in SGG samples. Increasing the level of SGG increased the volume (63.33-66.67 cm3). There was no significant difference in the weight of the samples. An increase in diameter (50.33-52.17 mm) was observed in SGG samples. Color analysis showed a significant increase in the L* (Lightness) of the crumb (46.28-49.12) compared to the crust (26.96-30.11) in the SX (sorghum: xanthan gum) and SGG samples. Redness (12.28-13.77) increased with levels, while yellowness (11.86-14.02) decreased with levels in SX and SGG crust. This study's findings are significant as they indicate that guar gum was the better binder for developing cereal fried dough (magwinya) from sorghum. These findings could have practical applications in the food industry, particularly in the development of gluten-free products and in the use of alternative grains like sorghum.

A review of gluten detoxification in wheat for food applications: approaches, mechanisms, and implications

With the improved knowledge of gluten-related disorders, especially celiac disease (CD), the market of gluten-free food is growing. However, the current gluten-free diet still presents challenges in terms of nutrition, acceptability, and cost due to the absence of gluten. It is important to note that gluten-related allergies or sensitivities have different underlying causes. And individuals with mild non-celiac gluten disorder symptoms may not necessarily require the same gluten-free treatments. Scientists are actively seeking alternative solutions for these consumers. This review delves into the various strategies employed by researchers for detoxifying gluten or modifying its main protein, gliadin, including genetic treatment, transamidation and deamidation, hydrolysis, and microbial treatments. The mechanisms, constraints of these techniques, their current utilization in food items, as well as their implications for gluten-related disorders, are discussed in detail. Although there is still a gap in the application of these methods as alternative solutions in the real market, the summary provided by our review could be beneficial for peers in enriching their basic ideas and developing more applicable solutions for wheat gluten detoxification.

State-of-the-art advancement in tara gum polysaccharide (Caesalpinia spinosa) modifications and their potential applications for drug delivery and the food industry

In preference to synthetic or petroleum-based materials, current research in food and pharmaceutical industries has focused on the development of biodegradable and sustainable materials due to their low toxicity, and biocompatibility. In particular, the natural water-soluble polysaccharide tara gum (Caesalpinia spinosa) has been widely used as a food-grade and drug-delivery agent due to its biodegradability, and biocompatibility. Moreover, owing to its easily modifiable hydroxy groups, tara gum, and its derivatives have been employed as food packaging films and pharmaceutical materials. In the present critical review, facile grafting methods of tara gum are reviewed, and an up-to-date comprehensive application of tara gum polysaccharides revealed their uses in pH-sensitive food packaging. In addition, modified tara gum materials exhibited improved drug delivery applications with biocompatible properties. The non-toxic nature and non-Newtonian, pseudoplastic rheological properties as well as the synergistic behavior of tara gum with other polysaccharides explore its further industrial applications in several fields. Additionally, several approaches for improving tara gum for use as a stabilizer and thickener for food items, and monitoring food spoilage, have provided notable customized characteristics. In brief, its many advantages make tara gum polysaccharide a promising material for applications in the food and pharmaceutical industries.

Gleditsia triacanthos Galactomannans in Gluten-Free Formulation: Batter Rheology and Bread Quality

Gluten-free batters, in general, require the incorporation of agents to control their rheology; this role is commonly played by hydrocolloids. New natural sources of hydrocolloids are under permanent research. In this regard, the functional properties of the galactomannan extracted from the seed of Gleditsia triacanthos (Gledi) have been studied. In this work, we evaluated the incorporation of this hydrocolloid, alone and in combination with Xanthan gum, in gluten-free batters and bread and compared it with Guar gum. The incorporation of hydrocolloids increased the viscoelastic profile of the batters. Gledi addition at 0.5% and 1.25% increased the elastic modulus (G') by 200% and 1500%, respectively, and similar trends were observed when Gledi-Xanthan was used. These increases were more pronounced when Guar and Guar-Xanthan were used. The batters became firmer and more elastically resistant because of the addition of hydrocolloids; batters containing Gledi had lower values of these parameters than batters containing Gledi-Xanthan. The addition of Gledi at both doses significantly increased the volume of the bread compared to the control by about 12%, while when Xanthan gum was included, a decrease was observed, especially at higher doses (by about 12%). The increase in specific volume was accompanied by a decrease in initial crumb firmness and chewiness, and during storage, they were significantly reduced. Bread prepared with Guar gum and Guar-Xanthan gum combinations was also evaluated, and the trends observed were comparable to that of bread with Gledi gum and Gledi-Xanthan gum. The results showed that Gledi addition favors the production of bread of high technological quality.

Characterization of sonicated gluten protein and subsequent rheological properties of model dough and noodles

BACKGROUND

The present study aimed to investigate the effects of the thermo-mechanical and rheological properties of a wheat gluten-sonicated model dough and noodles, as well as the effects of ultrasonic frequency (20, 28, 40, 68 and 80 kHz) on the functional properties and structural features of gluten.

RESULTS

Water absorption, stability and developmental time, and viscoelastic behavior of gluten-sonicated model dough were all found to be improved. Water absorption, tensile resistance and stretching distance of noodles increased markedly, whereas cooking loss decreased. Ultrasonication at different frequencies also significantly affected gluten structure, including its surface hydrophobicity, micro-network structure, and secondary and tertiary structures. These alterations then caused changes in its functional characteristics. Compared to untreated gluten, sonicated gluten exhibited significantly increased oil and water capacities (8.75-15.26% and 100.65-127.71% higher than the untreated gluten, respectively), foaming and emulsifying properties, and increased solubility (63.46-98.83% higher than control). In addition, these findings indicated that 40 kHz was the likely resonance frequency of the cavitation bubble in the gluten solution. However, sodium dodecyl sulfate-polyacrylamide gel electrophoresis electropherograms revealed that such treatments did not affect the molecular weight of gluten, which was also consistent with its unchanged disulfide bond content.

CONCLUSION

The present study clarified the impact of frequency on the properties of gluten and model dough. The best frequency for modification of gluten was 40 kHz. Collectively, these findings suggest that ultrasonic technology has the potential for use in modifying wheat gluten and commercial noodle processing. © 2022 Society of Chemical Industry.

Andean crops: kañiwa and tarwi flours used for the development of vegan gluten-free muffins

BACKGROUND

The flours of two Andean crops, tarwi (Lupinus mutabilis) and kañiwa (Chenopodium pallidicaule Aellen), present an excellent nutritional profile for inclusion in vegan gluten-free muffin formulations. In this study, the proximal composition and techno-functional properties of tarwi and kañiwa flours, and the technological quality of batters and muffins (potato starch-based) formulated with 50% of these flours were evaluated.

RESULTS

Andean flours have high protein, fiber, and fat content, and display high water and oil absorption. In premixes formulated with potato starch and Andean flours, a reduction in paste viscosity was observed due to starch dilution and lower water availability. Depending on their ability to interact with water, the batters formulated with these flours had a higher consistency. Confocal laser scanning micrographs showed that batters with Andean flours presented a complex matrix with dispersed starch granules surrounded by proteins and fiber fragments. Muffins made with Andean flours had a slightly lower specific volume than the control, but crumb hardness was not modified by tarwi flour (50%) and a mixture of tarwi (25%) and kañiwa (25%) flours. The intrinsic color of these flours modified crumb color, and their reducing sugar content also favored Maillard reactions in the crust. These color changes are desirable in gluten-free products because such products are frequently pale due to their high starch content.

CONCLUSIONS

This study showed that tarwi and kañiwa flours are suitable for developing vegan, gluten-free muffins of good technological quality and improved nutritional profile, adding value to these underutilized ancestral flours. © 2022 Society of Chemical Industry.

Nutritional, physical and sensory characteristics of bread with the inclusion of germinated basul (Erythrina edulis) flour

The goal was to assess the effect of different substitution levels (SL) of wheat flour with germinated basul flour (GBF) on nutritional, physical, and sensory characteristics of bread. The previously soaked basul fruits were germinated, dried, and transformed into flour. This product substituted wheat flour in the following SL: 0 (control), 5, 10, 15, and 20% of GBF, respectively, for the processing of loaves of bread. Nutritional values were determined by AOAC method. The physical characteristics assessed were weight, volume, porosity, and colour. The Flash Profile technique was used for the sensory assessment. A significant increase in the content of protein and crude fibre (3.86 and 50.49%, respectively) and a decrease in the content of carbohydrates (2.57%) were observed in all loaves with SL of 20%. With this same SL, it was observed that the physical characteristics did not differ significantly, except for height. In the sensory characteristics, loaves made with 20% SL also had a sweet flavour and a spongy appearance, except for the colour (change to opaque colour), which gradually decreased with the increased SL. The inclusion of GBF in bread improved nutritional and sensory quality, without affecting physical quality, which is why it can be considered healthy food.

Optimization of gluten-free bread production with low aflatoxin level based on quinoa flour containing xanthan gum and laccase enzyme

This study was aimed to develop a new cereal-based product using quinoa flour, xanthan gum, and laccase and also to evaluate their effects on the quality characteristics of gluten-free bread (GFB). Experimental design method was applied for optimization of gluten-free formulation. The effects of three variables of quinoa flour (0-50%), laccase activity (0-2 U/g flour), and xanthan gum (0-0.5%) on the contents of total aflatoxin (TAF) and aflatoxin B1 (AFB1), color indices (L*, a*, and b*), and texture properties (hardness, cohesiveness, and springiness) of GFB were evaluated. The results showed that quinoa flour and laccase enzyme significantly reduced TAF and AFB1 (p < 0.05). The lowest AFB1 level (3.67 ± 0.96 ng/g) in the GFB formulation containing quinoa flour (40%), laccase enzyme (2.0 U/g), and xanthan gum (0.46%) was very close to the predicted amount (3.66 ± 0.96 ng/g). Quinoa flour significantly reduced the L* and a* values and increased b* value and improved the texture parameters. Laccase enzyme also improved color indices and texture properties. Therefore, the use of laccase enzyme and quinoa flour is recommended based on the desired effect on the quality characteristics of GFB.

Natural Gums as Oleogelators

The natural gums used as high molecular weight oleogelators are mainly polysaccharides that deliver a broad spectrum of possible utilization methods when structuring liquid fats to solid forms. The review discusses a natural gums’ structuring and gelling behavior to capture the oil droplets and form the water/oil gelling emulsions basing on their structural conformation, internal charge, and polymeric characteristics. The specific parameters and characteristics of natural gums based oleogels are also discussed. In the future, oleogels may eliminate saturated and trans fats from food products and allow the production of low-fat products, thus reducing the environmental damage caused by the excessive use of palm oil. The increasing knowledge of molecular interaction in polysaccharide chains of natural gums allows to apply more sustainable and wiser strategies towards product formulation. Innovative solutions for using oleogels based on natural polysaccharide biopolymers let incorporate them into the food matrix and replace fats completely or create blends containing the source of fats and the addition of the oleogel. The profound insight into molecular characteristics of natural gums in the function of being oleogelators is presented.

Effect of cosolutes on the rheological and thermal properties of Tara gum aqueous solutions

The influence of the concentration (5-20 mg/mL) of different cosolutes (sucrose and NaCl) on the rheological and thermal properties of concentrated Tara gum (TG) solutions (1.5-2.5% w/v) was investigated. Furthermore, the structural properties of the TG, TG-sucrose and TG-NaCl solutions were studied. The TG, TG-sucrose and TG-NaCl solutions exhibited a pseudoplastic and typical viscoelastic behavior of an entangled network structure. An increase in the TG concentration increased the pseudoplasticity and the elasticity of the solutions, while the incorporation of NaCl reduced these properties. Sucrose had little influence on the rheological properties of the TG solutions. The texture profile and the water holding capacity of the TG solutions were significantly influenced by the concentration of the TG and did not change with the addition of the cosolutes. The thermal stability of the TG solutions was reduced by NaCl and was not altered by sucrose. The microstructures of the TG solutions was significantly affected by NaCl, supporting the results obtained from rheological and thermal analyses. The results of this study may be useful for the formulation and processing of foods containing TG.

Intelligent pH indicator films containing anthocyanins extracted from blueberry peel for monitoring tilapia fillet freshness

BACKGROUND

Fish spoilage leads to an increase in the pH value of the fish. A colorimetric pH indicator can be used to monitor fish spoilage and has been exploited in intelligent packaging because of its simplicity, practicality and low cost. The aim of this study was to develop two pH-indicator films comprising starch (S), tara gum (TG), polyvinyl alcohol (PVA) and anthocyanins extracted from blueberry peel and the films were then used to monitor the freshness of tilapia fillets during storage at 25 and 4 °C.

RESULTS

The ultraviolet-visible (UV-visible) spectra and color of anthocyanins changed within pH 2-10. Fourier-transform infrared spectroscopy, UV-visible spectrophotometry and scanning electron microscopy certified that blueberry peel extract (BPE) had been introduced into the S/PVA and TG/PVA matrices. Visual color changes in the films occurred at pH 2-8. A freshness application test was conducted in tilapia fillets stored at 4 and 25 °C, and visual color changes in the films were observed. The TG/PVA/BPE film had a greater color difference (ΔE) from pink and transparent to dark yellow at 25 °C and to dark purple at 4 °C than ΔE of S/PVA/BPE film, which sufficiently correlated with the change of total volatile base nitrogen (TVB-N) and total aerobic counts (TACs) of fillets.

CONCLUSION

It can be concluded that the color changes of TG/PVA/BPE films were corresponded with TVB-N and TAC values of tilapia fillets, which presented great potential as a visual package label to monitor fish freshness at ambient and chilled temperatures. © 2020 Society of Chemical Industry.

Ferreira LM, A. Peres J, R. N. A. Barros AI, Raymundo A. Impact of Acorn Flour on Gluten-Free Dough Rheology Properties

Gluten is a fundamental ingredient in breadmaking, since is responsible for the viscoelastic behaviour of the dough. The lack of gluten has a critical effect on gluten-free dough, leading to less cohesive and less elastic doughs, and its replacement represents a challenge for bakery industry. However, dough rheology can be improved combining different ingredients with structural capacity and taking advantage from their interactions. Although acorn flour was used to bake bread even before Romans, nowadays is an underexploited resource. It presents good nutritional characteristics, particularly high fibre content and is naturally gluten free. The aim of this study was to use acorn flour as a gluten-free ingredient to improve dough rheology, following also market trends of sustainability and fibre-rich ingredients. Doughs were prepared with buckwheat and rice flours, potato starch and hydroxypropylmethylcellulose. Two levels of acorn flour (23% and 35% w/w) were tested and compared with control formulation. Micro-doughLAB was used to study mixing and pasting properties. Doughs were characterised using small amplitude oscillatory measurements (SAOS), with a controlled stress rheometer, and regarding Texture Profile Analysis (TPA) by a texturometer. Dietary fibre content and its soluble and insoluble fractions were also evaluated on the developed breads. Acorn flour showed promising technological properties as food ingredient for gluten-free baking (improved firmness, cohesiveness and viscoelasticity of the fermented dough), being an important fibre source.