A water extraction process for lycopene from tomato waste using a pressurized method: an application of a numerical simulation

Extraction and Isolation of Natural Products

Bioactive compounds are substances that are generally found in small amounts in food and can have beneficial health effects [...]

Challenges and solutions of extracting value-added ingredients from fruit and vegetable by-products: a review

Every year, huge amounts of fruit and vegetable by-products in the food processing factories are produced. These by-products have great potential to be used for different targets especially the extraction of value-added ingredients. The target of this study is to review the challenges of extraction of value-added ingredients from fruit and vegetable by-products on the industrial scale and to describe current trends in solving these problems. In addition, some strategies such as multi-component extraction as well as application of fermentation before or after the extraction process, and production of biofuel, organic fertilizers, animal feeds, etc. on final residues after extraction of value-added ingredients are discussed in this review paper. In fact, simultaneous extraction of different value-added ingredients from fruit and vegetable by-products can increase the extraction efficiency and reduce the cost of value-added ingredients as well as the final volume of these by-products. After extraction of value-added ingredients, the residues can be used to produce biofuels, or they can be used to produce organic fertilizers, animal feeds, etc. Therefore, the application of several appropriate strategies to treat the fruit and vegetable by-products can increase their application, protect the environment, and improve the food economy.

Valorization of Tomato Waste as a Source of Carotenoids

Fast-accumulating scientific evidence from many studies has revealed that fruits and vegetables are the main source of bioactive compounds; in most cases, wastes and byproducts generated by the food processing industry present similar or a higher content of antioxidant compounds. In recent years, the ever-growing amount of agricultural and food wastes has raised serious concerns from an environmental point of view. Therefore, there is an increasing interest in finding new ways for their processing toward safely upgrading these wastes for recovering high-value-added products with a sustainable approach. Among food waste, the abundance of bioactive compounds in byproducts derived from tomato suggests possibility of utilizing them as a low-cost source of antioxidants as functional ingredients. This contribution gives an overview of latest studies on the extraction methods of carotenoids from tomato waste, along with an evaluation of their antioxidant activity, as well as their industrial applications.

Chemical Composition and Antioxidant Activity of Thyme, Hemp and Coriander Extracts: A Comparison Study of Maceration, Soxhlet, UAE and RSLDE Techniques

Appropriate and standardized techniques for the extraction of secondary metabolites with interesting biological activity from plants are required. In this work, a comparison of different conventional and unconventional extraction techniques (maceration—M, Soxhlet—S, ultrasound assisted extraction—UAE, and rapid solid-liquid dynamic extraction—RSLDE) was investigated. Bioactive compounds were extracted from Thymus vulgaris L. (thyme), Cannabis sativa L. (industrial hemp) and Coriandrum sativum L. (coriander) and chemically characterized for their volatile fraction and polyphenolic content by means of gas chromatography-mass spectrometry (GC-MS) and high performance liquid chromatography-ultraviolet (HPLC-UV). Linalool (48.19%, RSLDE) and carvacrol (21.30%, M) for thyme, caryophyllene (54.78%, S) and humulene (14.13%, S) for hemp, and linalool (84.16%, RSLDE) for coriander seeds were the main compounds among terpenes, while thyme was the richest source of polyphenols with rosmarinic acid (51.7 mg/g dry extract-S), apigenin (7.6 mg/g dry extract-S), and luteolin (4.1 mg/g dry extract-UAE) being the most abundant. In order to shed light on their potential as natural food preservatives, the biological activity of the extracts was assessed in terms of antioxidant activity (2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid—ABTS˙⁺, ferric reducing antioxidant power—FRAP, 2,2-diphenyl-1-picrylhydrazyl—DPPH˙ assays) and phenolic content (Folin–Ciocâlteu method). For thyme, Soxhlet extracts showed best performances in FRAP and ABTS˙⁺ assays (74 mg TE/g dry extract and 134 mg TE/g dry extract, respectively), while Soxhlet and RSLDE extracts recorded similar activity in DPPH˙ (107–109 mg TE/g dry extract). For hemp and coriander, indeed, RSLDE extracts accounted for higher antioxidant activity as evidenced by FRAP (80 mg TE/g dry extract and 18 mg TE/g dry extract, respectively) and ABTS˙⁺ (557 mg TE/g dry extract and 48 mg TE/g dry extract, respectively) assays. With respect to DPPH˙, the best results were observed for UAE extracts (45 mg TE/g dry extract and 220 mg TE/g dry extract, respectively). Our findings suggest that all the investigated techniques are valid extraction methods to retain bioactive compounds and preserve their activity for application in food and pharmaceutical formulations. Among them, the innovative RSLDE stands out for the slightly higher antioxidant performances of the extracts, coupled with the facility of use and standardization of the extraction process.

Study of the Kinetics of Extraction Process for The Production of Hemp Inflorescences Extracts by Means of Conventional Maceration (CM) and Rapid Solid-Liquid Dynamic Extraction (RSLDE)

In the present work, the kinetics of the extraction process from female inflorescences of Canapa sativa subsp. sativa var. sativa were studied, on the basis of determination of the content of cannabinoids: cannabidiolic acid (CBDA), Δ9-tetrahydrocannabinolic acid (THCA), cannabidiol (CBD) and Δ9-tetrahydrocannabinol (THC), before and after decarboxylation in the oven, in order to evaluate the possible use of the hemp extract obtained in the food sector. Therefore, both conventional maceration (CM) and rapid solid-liquid dynamic extraction (RSLDE), also known as cyclically pressurized extraction (CPE), were carried out, using parts of the plant approximately of the same size. The alcoholic extracts thus obtained were analyzed by high-performance liquid chromatography (HPLC) in order to calculate the percentages of cannabinoids present in the inflorescences and thus be able to evaluate the degree of decarboxylation. Furthermore, the extracts were dried to calculate the percentage of solid material present in it, that was made mainly by cannabinoids. The amount of substance extracted from the inflorescences was about 10% (w/w), for both cases considered. Therefore, the extraction yield was the same in the two cases examined and the final qualities were almost identical. However, the extraction times were significantly different. In fact, the maceration of hemp inflorescences in ethyl alcohol was completed in no less than 24 h, while with the RSLDE the extraction was completed in only 4 h. Finally, for a better understanding of the extraction process with cyclically pressurized extraction, a numerical simulation was carried out which allowed to better evaluate the influence of extractive parameters.

Rapid Solid-Liquid Dynamic Extraction (RSLDE): A Powerful and Greener Alternative to the Latest Solid-Liquid Extraction Techniques

Traditionally, solid-liquid extractions are performed using organic and/or inorganic liquids and their mixtures as extractant solvents in contact with an insoluble solid matrix (e.g., the Soxhlet method) or using sequential atmospheric pressure systems that require long procedures, such as maceration or percolation. The objective of this procedure is the extraction of any compounds that can be carried out from the inner solid material to the outlet, resulting in a solution containing colorants, bioactive compounds, odorous substances, etc. Over the years, in the extraction techniques sector, there have been many important changes from the points of view of production, quality, and human and environmental safety due to improvements in technology. In more recent times, the interest of the scientific community has been aimed at the study of sustainable processes for the valorization of extracts from vegetables and food by-products, through the use of non-conventional (innovative) technologies that represent a valid alternative to conventional methods, generally through saving time and energy and the formation of fewer by-products. Therefore, with the development of principles based on the prevention of pollution, on a lower risk for human health, and on a low environmental impact, new systems have been implemented to reduce extraction times and solvent consumption, to improve efficiency, and to increase the productivity of the extracts. From this point of view, rapid solid-liquid dynamic extraction (RSLDE), performed using the Naviglio extractor, compared to traditional applications, is a technique that is able to reduce extraction times, generally leads to higher yields, does not require heating of the system, allows one to extract the active ingredients, and avoids their degradation. This technique is based on a new solid-liquid extraction principle named Naviglio’s principle. In this review, after reviewing the latest extraction techniques, an overview of RSLDE applications in various research and production sectors over the past two decades is provided.