Oxidation of 2,4-dinitrophenol by hydrogen peroxide in the presence of basic oxygen furnace slag

The use of steel slags in the heterogeneous Fenton process for decreasing the chemical oxygen demand of oil refinery wastewater

The Fenton process is a useful and inexpensive type of advanced oxidation process for industrial wastewater treatment. This study was performed with the aim of using the steel slag as a catalyst in the heterogeneous Fenton process in order to reduce the chemical oxygen demand (COD) of oil refinery wastewater. The effects of various parameters including the reaction time (0.5, 1.0, 2.0, 3.0 and 4.0 h), pH (2.0, 3.0, 4.0, 5.0, 6.0 and 7.0), the concentration of steel slag (12.5, 25.0 and 37.5 g/L), and H₂O₂ concentration (100, 250, 400 and 500 mg/L) on the Fenton process were investigated. Furthermore, the effect of microwave irradiation on the process efficiency was studied by considering the optimum conditions of the mentioned parameters. The results showed that using 25.0 g/L of steel slag and 250 mg/L H₂O₂, at pH = 3.0, could reduce COD by up to 64% after 2.0 h. Also, microwave irradiation decreased the time of the process from 120 min to 25 min in the optimum conditions, but it consumed a high amount of energy. It could be concluded that steel slags had a high potential in the treatment of oil refinery wastewater through the Fenton process.

Comparative modelling of mono- and dinitrophenols sorption on yellow bentonite from aqueous solutions

Equilibrium removal of three substituted nitrophenols, namely 2-nitrophenol (2-NP), 4-nitrophenol (4-NP), and 2,4-dinitrophenol (2,4-DNP), by adsorption on yellow bentonite was tested. The batch kinetic data are described by the pseudo-first order, pseudo-second order, and intraparticle diffusion models. Results show that chemisorption processes could be rate limiting in the sorption step. The adsorption equilibrium was modelled by the Langmuir and Freundlich equations. The Langmuir model better represents the equilibrium isotherm data for 2-NP, 4-NP, and 2,4-DNP uptake on yellow bentonite. 4-NP is adsorbed in larger amounts than the disubstituted nitrophenol. Uptake of nitrophenols increases in the order 2-NP < 2,4-DNP < 4-NP.