L-Arabinose metabolism in Candida arabinofermentans PYCC 5603T and Pichia guilliermondii PYCC 3012: influence of sugar and oxygen on product formation

Biotechnological applications of the non-conventional yeast Meyerozyma guilliermondii

Unconventional yeasts have attracted increased attentions owning to their unique biochemical properties and potential application in the biotechnological process. With the rapid development of microbial isolation tools and synthetic biology, more promising industrial yeasts have been isolated and characterized. Meyerozyma guilliermondii (anamorph Candida guilliermondii) is an ascomycetous yeast with several unique characteristics and physiology, such as the wide substrates spectrum and capability of various chemicals synthesis. The potential physiological and metabolic capabilities of M. guilliermondii, which can utilize various carbon sources including typical hydrophilic and hydrophobic materials were first reviewed in this review. Moreover, the wide applications of M. guilliermondii, such as for industrial enzymes production, metabolites synthesis and biocontrol were also reviewed. With the development of system and synthetic biology, M. guilliermondii will provide new opportunities for potential applications in biotechnology sectors in the future.

Fermentation profiles of the yeast Brettanomyces bruxellensis in d-xylose and l-arabinose aiming its application as a second-generation ethanol producer

The yeast Brettanomyces bruxellensis is able to ferment the main sugars used in first-generation ethanol production. However, its employment in this industry is prohibitive because the ethanol productivity reached is significantly lower than the observed for Saccharomyces cerevisiae. On the other hand, a possible application of B. bruxellensis in the second-generation ethanol production has been suggested because this yeast is also able to use d-xylose and l-arabinose, the major pentoses released from lignocellulosic material. Although the latter application seems to be reasonable, it has been poorly explored. Therefore, we aimed to evaluate whether or not different industrial strains of B. bruxellensis are able to ferment d-xylose and l-arabinose, both in aerobiosis and oxygen-limited conditions. Three out of nine tested strains were able to assimilate those sugars. When in aerobiosis, B. bruxellensis cells exclusively used them to support biomass formation, and no ethanol was produced. Moreover, whereas l-arabinose was not consumed under oxygen limitation, d-xylose was only slightly used, which resulted in low ethanol yield and productivity. In conclusion, our results showed that d-xylose and l-arabinose are not efficiently converted to ethanol by B. bruxellensis, most likely due to a redox imbalance in the assimilatory pathways of these sugars. Therefore, despite presenting other industrially relevant traits, the employment of B. bruxellensis in second-generation ethanol production depends on the development of genetic engineering strategies to overcome this metabolic bottleneck.

Tracking strategic developments for conferring xylose utilization/fermentation by Saccharomyces cerevisiae

Purpose

Efficient ethanol production through lignocellulosic biomass hydrolysates could solve energy crisis as it is economically sustainable and ecofriendly. Saccharomyces cerevisiae is the work horse for lignocellulosic bioethanol production at industrial level. But its inability to ferment and utilize xylose limits the overall efficacy of the process.

Method

Data for the review was selected using different sources, such as Biofuels digest, Statista, International energy agency (IEA). Google scholar was used as a search engine to search literature for yeast metabolic engineering approaches. Keywords used were metabolic engineering of yeast for bioethanol production from lignocellulosic biomass.

Result

Through these approaches, interconnected pathways can be targeted randomly. Moreover, the improved strains genetic makeup can help us understand the mechanisms involved for this purpose.

Conclusion

This review discusses all possible approaches for metabolic engineering of yeast. These approaches may reveal unknown hidden mechanisms and construct ways for the researchers to produce novel and modified strains.

The Improvement of Bioethanol Production by Pentose-Fermenting Yeasts Isolated from Herbal Preparations, the Gut of Dung Beetles, and Marula Wine

Efficient conversion of pentose sugars to ethanol is important for an economically viable lignocellulosic bioethanol process. Ten yeasts fermenting both D-xylose and L-arabinose were subjected to an adaptation process with L-arabinose as carbon source in a medium containing acetic acid. Four Meyerozyma caribbica-adapted strains were able to ferment L-arabinose to ethanol in the presence of 3 g/L acetic acid at 35°C. Meyerozyma caribbica Mu 2.2f fermented L-arabinose to produce 3.0 g/L ethanol compared to the parental strain with 1.0 g/L ethanol in the absence of acetic acid. The adapted M. caribbica Mu 2.2f strain produced 3.6 and 0.8 g/L ethanol on L-arabinose and D-xylose, respectively, in the presence of acetic acid while the parental strain failed to grow. In a bioreactor, the adapted M. caribbica Mu 2.2f strain produced 5.7 g/L ethanol in the presence of 3 g/L acetic acid with an ethanol yield and productivity of 0.338 g/g and 0.158 g/L/h, respectively, at a K _L a value of 3.3 h^-1. The adapted strain produced 26.7 g/L L-arabitol with a yield of 0.900 g/g at a K _L a value of 4.9 h^-1.

Alternative Substrate Metabolism in Yarrowia lipolytica

Recent advances in genetic engineering capabilities have enabled the development of oleochemical producing strains of Yarrowia lipolytica. Much of the metabolic engineering effort has focused on pathway engineering of the product using glucose as the feedstock; however, alternative substrates, including various other hexose and pentose sugars, glycerol, lipids, acetate, and less-refined carbon feedstocks, have not received the same attention. In this review, we discuss recent work leading to better utilization of alternative substrates. This review aims to provide a comprehensive understanding of the current state of knowledge for alternative substrate utilization, suggest potential pathways identified through homology in the absence of prior characterization, discuss recent work that either identifies, endogenous or cryptic metabolism, and describe metabolic engineering to improve alternative substrate utilization. Finally, we describe the critical questions and challenges that remain for engineering Y. lipolytica for better alternative substrate utilization.

The production of arabitol by a novel plant yeast isolate Candida parapsilosis 27RL-4

Polyalcohol arabitol can be used in the food and pharmaceutical industries as a natural sweetener, a dental caries reducer, and texturing agent. Environmental samples were screened to isolate effective yeast producers of arabitol. The most promising isolate 27RL-4, obtained from raspberry leaves, was identified genetically and biochemically as Candida parapsilosis. It secreted 10.42– 10.72 g l-1 of product from 20 g l-1 of L-arabinose with a yield of 0.51 - 0.53 g g-1 at 28°C and a rotational speed of 150 rpm. Batch cultures showed that optimal pH value for arabitol production was 5.5. High yields and productivities of arabitol were obtained during incubation of the yeast at 200 rpm, or at 32°C, but the concentrations of the polyol did not exceed 10 g l-1. In modified medium, with reduced amounts of nitrogen compounds and pH 5.5-6.5, lower yeast biomass produced a similar concentration of arabitol, suggesting higher efficiency of yeast cells. This strain also produced arabitol from glucose, with much lower yields. The search for new strains able to successfully produce arabitol is important for allowing the utilization of sugars abundant in plant biomass.

The Ability of a Novel Strain Scheffersomyces (Syn. Candida) shehatae Isolated from Rotten Wood to Produce Arabitol

Arabitol is a polyalcohol which has about 70% of the sweetness of sucrose and an energy density of 0.2 kcal/g. Similarly to xylitol, it can be used in the food and pharmaceutical industries as a natural sweetener, a texturing agent, a dental caries reducer, and a humectant. Biotechnological production of arabitol from sugars represents an interesting alternative to chemical production. The yeast Scheffersomyces shehatae strain 20BM-3 isolated from rotten wood was screened for its ability to produce arabitol from L-arabinose, glucose, and xylose. This isolate, cultured at 28°C and 150 rpm, secreted 4.03 ± 0.00 to 7.97 ± 0.67 g/l of arabitol from 17–30 g/l of L-arabinose assimilated from a medium containing 20–80 g/l of this pentose with yields of 0.24 ± 0.00 to 0.36 ± 0.02 g/g. An optimization study demonstrated that pH 4.0, 32°C, and a shaking frequency of 150 rpm were the optimum conditions for arabitol production by the investigated strain. Under these conditions, strain 20BM-3 produced 6.2 ± 0.17 g/l of arabitol from 17.5 g/l of arabinose after 4 days with a yield of 0.35 ± 0.01 g/g. This strain also produced arabitol from glucose, giving much lower yields, but did not produce it from xylose. The new strain can be successfully used for arabitol production from abundantly available sugars found in plant biomass.

Screening and characterizing of xylanolytic and xylose-fermenting yeasts isolated from the wood-feeding termite, Reticulitermes chinensis

The effective fermentation of xylose remains an intractable challenge in bioethanol industry. The relevant xylanase enzyme is also in a high demand from industry for several biotechnological applications that inevitably in recent times led to many efforts for screening some novel microorganisms for better xylanase production and fermentation performance. Recently, it seems that wood-feeding termites can truly be considered as highly efficient natural bioreactors. The highly specialized gut systems of such insects are not yet fully realized, particularly, in xylose fermentation and xylanase production to advance industrial bioethanol technology as well as industrial applications of xylanases. A total of 92 strains from 18 yeast species were successfully isolated and identified from the gut of wood-feeding termite, Reticulitermes chinensis. Of these yeasts and strains, seven were identified for new species: Candida gotoi, Candida pseudorhagii, Hamamotoa lignophila, Meyerozyma guilliermondii, Sugiyamaella sp.1, Sugiyamaella sp. 2, and Sugiyamaella sp.3. Based on the phylogenetic and phenotypic characterization, the type strain of C. pseudorhagii sp. nov., which was originally designated strain SSA-1542^T, was the most frequently occurred yeast from termite gut samples, showed the highly xylanolytic activity as well as D-xylose fermentation. The highest xylanase activity was recorded as 1.73 and 0.98 U/mL with xylan or D-xylose substrate, respectively, from SSA-1542^T. Among xylanase-producing yeasts, four novel species were identified as D-xylose-fermenting yeasts, where the yeast, C. pseudorhagii SSA-1542^T, showed the highest ethanol yield (0.31 g/g), ethanol productivity (0.31 g/L·h), and its fermentation efficiency (60.7%) in 48 h. Clearly, the symbiotic yeasts isolated from termite guts have demonstrated a competitive capability to produce xylanase and ferment xylose, suggesting that the wood-feeding termite gut is a promising reservoir for novel xylanases-producing and xylose-fermenting yeasts that are potentially valued for biorefinery industry.

Production of arabitol by yeasts: current status and future prospects

Arabitol belongs to the pentitol family and is used in the food industry as a sweetener and in the production of human therapeutics as an anticariogenic agent and an adipose tissue reducer. It can also be utilized as a substrate for chemical products such as arabinoic and xylonic acids, propylene, ethylene glycol, xylitol and others. It is included on the list of 12 building block C3-C6 compounds, designated for further biotechnological research. This polyol can be produced by yeasts in the processes of bioconversion or biotransformation of waste materials from agriculture, the forest industry (l-arabinose, glucose) and the biodiesel industry (glycerol). The present review discusses research on native yeasts from the genera Candida, Pichia, Debaryomyces and Zygosaccharomyces as well as genetically modified strains of Saccharomyces cerevisiae which are able to utilize biomass hydrolysates to effectively produce L- or D-arabitol. The metabolic pathways of these yeasts leading from sugars and glycerol to arabitol are presented. Although the number of reports concerning microbial production of arabitol is rather limited, the research on this topic has been growing for the last several years, with researchers looking for new micro-organisms, substrates and technologies.

Identification and characterisation of xylanolytic yeasts isolated from decaying wood and sugarcane bagasse in Brazil

In this study, yeasts associated with lignocellulosic materials in Brazil, including decaying wood and sugarcane bagasse, were isolated, and their ability to produce xylanolytic enzymes was investigated. A total of 358 yeast isolates were obtained, with 198 strains isolated from decaying wood and 160 strains isolated from decaying sugarcane bagasse samples. Seventy-five isolates possessed xylanase activity in solid medium and were identified as belonging to nine species: Candida intermedia, C. tropicalis, Meyerozyma guilliermondii, Scheffersomyces shehatae, Sugiyamaella smithiae, Cryptococcus diffluens, Cr. heveanensis, Cr. laurentii and Trichosporon mycotoxinivorans. Twenty-one isolates were further screened for total xylanase activity in liquid medium with xylan, and five xylanolytic yeasts were selected for further characterization, which included quantitative analysis of growth in xylan and xylose and xylanase and β-D-xylosidase activities. The yeasts showing the highest growth rate and cell density in xylan, Cr. laurentii UFMG-HB-48, Su. smithiae UFMG-HM-80.1 and Sc. shehatae UFMG-HM-9.1a, were, simultaneously, those exhibiting higher xylanase activity. Xylan induced the highest level of (extracellular) xylanase activity in Cr. laurentii UFMG-HB-48 and the highest level of (intracellular, extracellular and membrane-associated) β-D-xylosidase activity in Su. smithiae UFMG-HM-80.1. Also, significant β-D-xylosidase levels were detected in xylan-induced cultures of Cr. laurentii UFMG-HB-48 and Sc. shehatae UFMG-HM-9.1a, mainly in extracellular and intracellular spaces, respectively. Under xylose induction, Cr. laurentii UFMG-HB-48 showed the highest intracellular β-D-xylosidase activity among all the yeast tested. C. tropicalis UFMG-HB 93a showed its higher (intracellular) β-D-xylosidase activity under xylose induction and higher at 30 °C than at 50 °C. This study revealed different xylanolytic abilities and strategies in yeasts to metabolise xylan and/or its hydrolysis products (xylo-oligosaccharides and xylose). Xylanolytic yeasts are able to secrete xylanolytic enzymes mainly when induced by xylan and present different strategies (intra- and/or extracellular hydrolysis) for the metabolism of xylo-oligosaccharides. Some of the unique xylanolytic traits identified here should be further explored for their applicability in specific biotechnological processes.

Development of a phenotypic assay for characterisation of ethanologenic yeast strain sensitivity to inhibitors released from lignocellulosic feedstocks

Inhibitors released by the breakdown of plant cell walls prevent efficient conversion of sugar into ethanol. The aim of this study was to develop a fast and reliable inhibitor sensitivity assay for ethanologenic yeast strains. The assay comprised bespoke 96-well plates containing inhibitors in isolation or combination in a format that was compatible with the Phenotypic Microarray Omnilog reader (Biolog, hayward, CA, USA). A redox reporter within the assay permits analysis of inhibitor sensitivity in aerobic and/or anaerobic conditions. Results from the assay were verified using growth on spot plates and tolerance assays in which maintenance of viability was assessed. The assay allows for individual and synergistic effects of inhibitors to be determined. It was observed that the presence of both acetic and formic acid significantly inhibited the yeast strains assessed, although this impact could be partially mitigated by buffering to neutral pH. Scheffersomyces stipitis, Candida spp., and Pichia guilliermondii demonstrated increased sensitivity to short chain weak acids at concentrations typically present in lignocellulosic hydrolysates. S. cerevisiae exhibited robustness to short chain weak acids at these concentrations. However, S. stipitis, Candida spp., and P. guilliermondii displayed increased tolerance to HMF when compared to that observed for S. cerevisiae. The results demonstrate that the phenotypic microarray assay developed in the current study is a valuable tool that can be used to identify yeast strains with desirable resistance to inhibitory compounds found in lignocellulosic hydrolysates.

Application of response surface methodology for the optimization of arabinose biotransformation to arabitol by Candida parapsilosis

L-arabitol, a polyol with applications in the food and pharmaceutical industries, is secreted by different yeasts, e.g., Candida spp., Pichia spp., and Debaryomyces spp. The process of its biotechnological production is highly dependent on the physical and chemical conditions of culture. The aim of this study was to use statistical response surface methodology (RSM) to optimize the biotransformation of L-arabinose to arabitol by Candida parapsilosis, a yeast species able to assimilate pentoses. Batch cultures of the yeast were prepared following a Plackett-Burman design for seven variables. Following this, rotation speed, temperature, and L-arabinose concentration were chosen for a central composite design (CCD) experiment, which was carried out to optimize the production L-arabitol. The results showed that the optimal levels for the three factors were: rotation speed 150 rpm, temperature 28°C, and L-arabinose concentration 32.5 g/l. The predicted concentration of arabitol after two days of incubation of C. parapsilosis under the above conditions was 14.3 g/l. The value of R2=0.8323 suggested that this model was well-fitted to the experimental data, and this was confirmed during a verification experiment.

Production of ethanol and arabitol by Debaryomyces nepalensis: influence of process parameters

Debaryomyces nepalensis, osmotolerant yeast isolated from rotten apple, is known to utilize both hexoses and pentoses and produce industrially important metabolites like ethanol, xylitol and arabitol. In the present study, the effect of different growth substrates, trace elements, nitrogen concentration and initial pH on growth and formation of ethanol and arabitol were examined. Optimum conditions for maximizing the product yields were established: glucose as carbon source, an initial pH of 6.0, 6 g/L of ammonium sulphate and addition of micronutrients. Under these best suited conditions, a concentration of 11g/L of arabitol and 19 g/L of ethanol was obtained in shake flask fermentations. The fermentation was scaled up to 2.5 L bioreactor and the influence of aeration, agitation and initial substrate concentration was also determined. Under optimal conditions (150 g/L glucose, 400 rpm and 0.5 vvm) ethanol concentration reached 52 g/L, which corresponds to a yield of 0.34 g/g and volumetric productivity of 0.28 g/L/h, whereas arabitol production reached a maximum of 14 g/L with a yield and volumetric productivity of 0.1 g/g and 0.07 g/L/h respectively.

Diversity and physiological characterization of D-xylose-fermenting yeasts isolated from the Brazilian Amazonian Forest

Background

This study is the first to investigate the Brazilian Amazonian Forest to identify new D-xylose-fermenting yeasts that might potentially be used in the production of ethanol from sugarcane bagasse hemicellulosic hydrolysates.

Methodology/Principal Findings

A total of 224 yeast strains were isolated from rotting wood samples collected in two Amazonian forest reserve sites. These samples were cultured in yeast nitrogen base (YNB)-D-xylose or YNB-xylan media. Candida tropicalis, Asterotremella humicola, Candida boidinii and Debaryomyces hansenii were the most frequently isolated yeasts. Among D-xylose-fermenting yeasts, six strains of Spathaspora passalidarum, two of Scheffersomyces stipitis, and representatives of five new species were identified. The new species included Candida amazonensis of the Scheffersomyces clade and Spathaspora sp. 1, Spathaspora sp. 2, Spathaspora sp. 3, and Candida sp. 1 of the Spathaspora clade. In fermentation assays using D-xylose (50 g/L) culture medium, S. passalidarum strains showed the highest ethanol yields (0.31 g/g to 0.37 g/g) and productivities (0.62 g/L·h to 0.75 g/L·h). Candida amazonensis exhibited a virtually complete D-xylose consumption and the highest xylitol yields (0.55 g/g to 0.59 g/g), with concentrations up to 25.2 g/L. The new Spathaspora species produced ethanol and/or xylitol in different concentrations as the main fermentation products. In sugarcane bagasse hemicellulosic fermentation assays, S. stipitis UFMG-XMD-15.2 generated the highest ethanol yield (0.34 g/g) and productivity (0.2 g/L·h), while the new species Spathaspora sp. 1 UFMG-XMD-16.2 and Spathaspora sp. 2 UFMG-XMD-23.2 were very good xylitol producers.

Conclusions/Significance

This study demonstrates the promise of using new D-xylose-fermenting yeast strains from the Brazilian Amazonian Forest for ethanol or xylitol production from sugarcane bagasse hemicellulosic hydrolysates.

A novel method to prepare L-arabinose from xylose mother liquor by yeast-mediated biopurification

Background

L-arabinose is an important intermediate for anti-virus drug synthesis and has also been used in food additives for diets-controlling in recent years. Commercial production of L-arabinose is a complex progress consisting of acid hydrolysis of gum arabic, followed by multiple procedures of purification, thus making high production cost. Therefore, there is a biotechnological and commercial interest in the development of new cost-effective and high-performance methods for obtaining high purity grade L-arabinose.

Results

An alternative, economical method for purifying L-arabinose from xylose mother liquor was developed in this study. After screening 306 yeast strains, a strain of Pichia anomala Y161 was selected as it could effectively metabolize other sugars but not L-arabinose. Fermentation in a medium containing xylose mother liquor permitted enrichment of L-arabinose by a significant depletion of other sugars. Biochemical analysis of this yeast strain confirmed that its poor capacity for utilizing L-arabinose was due to low activities of the enzymes required for the metabolism of this sugar. Response surface methodology was employed for optimization the fermentation conditions in shake flask cultures. The optimum conditions were: 75 h fermentation time, at 32.5°C, in a medium containing 21% (v/v) xylose mother liquor. Under these conditions, the highest purity of L-arabinose reached was 86.1% of total sugar, facilitating recovery of white crystalline L-arabinose from the fermentation medium by simple methods.

Conclusion

Yeast-mediated biopurification provides a dynamic method to prepare high purity of L-arabinose from the feedstock solution xylose mother liqour, with cost-effective and high-performance properties.

Arabinose and xylose fermentation by recombinant Saccharomyces cerevisiae expressing a fungal pentose utilization pathway

Background

Sustainable and economically viable manufacturing of bioethanol from lignocellulose raw material is dependent on the availability of a robust ethanol producing microorganism, able to ferment all sugars present in the feedstock, including the pentose sugars L-arabinose and D-xylose. Saccharomyces cerevisiae is a robust ethanol producer, but needs to be engineered to achieve pentose sugar fermentation.

Results

A new recombinant S. cerevisiae strain expressing an improved fungal pathway for the utilization of L-arabinose and D-xylose was constructed and characterized. The new strain grew aerobically on L-arabinose and D-xylose as sole carbon sources. The activities of the enzymes constituting the pentose utilization pathway(s) and product formation during anaerobic mixed sugar fermentation were characterized.

Conclusion

Pentose fermenting recombinant S. cerevisiae strains were obtained by the expression of a pentose utilization pathway of entirely fungal origin. During anaerobic fermentation the strain produced biomass and ethanol. L-arabitol yield was 0.48 g per gram of consumed pentose sugar, which is considerably less than previously reported for D-xylose reductase expressing strains co-fermenting L-arabinose and D-xylose, and the xylitol yield was 0.07 g per gram of consumed pentose sugar.

Crabtree-negative characteristics of recombinant xylose-utilizing Saccharomyces cerevisiae

For recombinant xylose-utilizing Saccharomyces cerevisiae, ethanol yield and productivity is substantially lower on xylose than on glucose. In contrast to glucose, xylose is a novel substrate for S. cerevisiae and it is not known how this substrate is recognized on a molecular level. Failure to activate appropriate genes during xylose-utilization has the potential to result in sub-optimal metabolism and decreased substrate uptake. Certain differences in fermentative performance between the two substrates have thus been ascribed to variations in regulatory response. In this study differences in substrate utilization of glucose and xylose was analyzed in the recombinant S. cerevisiae strain TMB3400. Continuous cultures were performed with glucose and xylose under carbon- and nitrogen-limited conditions. Whereas biomass yield and substrate uptake rate were similar during carbon-limited conditions, the metabolic profile was highly substrate dependent under nitrogen-limited conditions. While glycerol production occurred in both cases, ethanol production was only observed for glucose cultures. Addition of acetate and 2-deoxyglucose pulses to a xylose-limited culture was able to stimulate transient overflow metabolism and ethanol production. Application of glucose pulses enhanced xylose uptake rate under restricted co-substrate concentrations. Results are discussed in relation to regulation of sugar metabolism in Crabtree-positive and -negative yeast.

Use of in vivo 13C nuclear magnetic resonance spectroscopy to elucidate L-arabinose metabolism in yeasts

Candida arabinofermentans PYCC 5603(T) and Pichia guilliermondii PYCC 3012 were shown to grow well on L-arabinose, albeit exhibiting distinct features that justify an in-depth comparative study of their respective pentose catabolism. Carbon-13 labeling experiments coupled with in vivo nuclear magnetic resonance (NMR) spectroscopy were used to investigate L-arabinose metabolism in these yeasts, thereby complementing recently reported physiological and enzymatic data. The label supplied in L-[2-(13)C]arabinose to nongrowing cells, under aerobic conditions, was found on C-1 and C-2 of arabitol and ribitol, on C-2 of xylitol, and on C-1, C-2, and C-3 of trehalose. The detection of labeled arabitol and xylitol constitutes additional evidence for the operation in yeast of the redox catabolic pathway, which is widespread among filamentous fungi. Furthermore, labeling at position C-1 of trehalose and arabitol demonstrates that glucose-6-phosphate is recycled through the oxidative pentose phosphate pathway (PPP). This result was interpreted as a metabolic strategy to regenerate NADPH, the cofactor essential for sustaining l-arabinose catabolism at the level of L-arabinose reductase and L-xylulose reductase. Moreover, the observed synthesis of D-arabitol and ribitol provides a route with which to supply NAD(+) under oxygen-limiting conditions. In P. guilliermondii PYCC 3012, the strong accumulation of L-arabitol (intracellular concentration of up to 0.4 M) during aerobic L-arabinose metabolism indicates the existence of a bottleneck at the level of L-arabitol 4-dehydrogenase. This report provides the first experimental evidence for a link between L-arabinose metabolism in fungi and the oxidative branch of the PPP and suggests rational guidelines for the design of strategies for the production of new and efficient L-arabinose-fermenting yeasts.

l-Arabinose transport and catabolism in yeast

Two yeasts, Candida arabinofermentans PYCC 5603(T) and Pichia guilliermondii PYCC 3012, which show rapid growth on L-arabinose and very high rates of L-arabinose uptake on screening, were selected for characterization of L-arabinose transport and the first steps of intracellular L-arabinose metabolism. The kinetics of L-arabinose uptake revealed at least two transport systems with distinct substrate affinities, specificities, functional mechanisms and regulatory properties. The L-arabinose catabolic pathway proposed for filamentous fungi also seems to operate in the yeasts studied. The kinetic parameters of the initial L-arabinose-metabolizing enzymes were determined. Reductases were found to be mostly NADPH-dependent, whereas NAD was the preferred cofactor of dehydrogenases. The differences found between the two yeasts agree with the higher efficiency of L-arabinose metabolism in C. arabinofermentans. This is the first full account of the initial steps of L-arabinose catabolism in yeast including the biochemical characterization of a specific L-arabinose transporter.