Kinetic analysis of biodesulfurization of model oil containing multiple alkyl dibenzothiophenes

Biodesulfurization of Fossil Fuels: Analysis and Prospective

Biodesulfurization (BDS) of fossil fuels is a promising method for treating the high content of sulfur in crude oils and their derivatives in the future, attributed to its environmental-friendly nature and the technical efficient ability to desulfurize the organosulfur compounds recalcitrant on other techniques. It was found that the bioreaction rate depends on the treated fluid, targeting sulfur compounds, and the microorganism applied. Also, many studies investigated the operation conditions, specificity, and biocatalysts modification to develop BDS efficiency. Furthermore, mathematical kinetics models were formulated to represent the process. In this review, the previous studies are analyzed and discussed. This review article is characterized by a clear picture of all BDS's experimental, industrial, procedural, theoretical, and hypothetical points.

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

Biodesulfurization of Dibenzothiophene and Its Alkylated Derivatives in a Two-Phase Bubble Column Bioreactor by Resting Cells of Rhodococcus erythropolis IGTS8

Biodesulfurization (BDS) is considered a complementary technology to the traditional hydrodesulfurization treatment for the removal of recalcitrant sulfur compounds from petroleum products. BDS was investigated in a bubble column bioreactor using two-phase media. The effects of various process parameters, such as biocatalyst age and concentration, organic fraction percentage (OFP), and type of sulfur compound—namely, dibenzothiophene (DBT), 4-methyldibenzothiophene (4-MDBT), 4,6-dimethyldibenzothiophene (4,6-DMDBT), and 4,6-diethyldibenzothiophene (4,6-DEDBT)—were evaluated, using resting cells of Rhodococcus erythropolis IGTS8. Cells derived from the beginning of the exponential growth phase of the bacterium exhibited the highest biodesulfurization efficiency and rate. The biocatalyst performed better in an OFP of 50% v/v. The extent of DBT desulfurization was dependent on cell concentration, with the desulfurization rate reaching its maximum at intermediate cell concentrations. A new semi-empirical model for the biphasic BDS was developed, based on the overall Michaelis-Menten kinetics and taking into consideration the deactivation of the biocatalyst over time, as well as the underlying mass transfer phenomena. The model fitted experimental data on DBT consumption and 2-hydroxibyphenyl (2-HBP) accumulation in the organic phase for various initial DBT concentrations and different organosulfur compounds. For constant OFP and biocatalyst concentration, the most important parameter that affects BDS efficiency seems to be biocatalyst deactivation, while the phenomenon is controlled by the affinities of biodesulfurizing enzymes for the different organosulfur compounds. Thus, desulfurization efficiency decreased with increasing initial DBT concentration, and in inverse proportion to increases in the carbon number of alkyl substituent groups.

Biodesulfurization of refractory sulfur compounds in petro-diesel by a novel hydrocarbon tolerable strain Paenibacillus glucanolyticus HN4

One of the main precursors of air pollution and acid rains is the presence of the recalcitrant thiophenic compounds, for example dibenzothiophene (DBT) and its derivatives in transportation fuels. In an attempt to achieve the worldwide regulations of ultra-low sulfur transportation fuels without affecting its hydrocarbon skeleton, a biphasic medium containing 100 mg/L DBT dissolved in n-hexadecane (1/4 oil/water v/v) used for enrichment and isolation of selective biodesulfurizing bacterium from an oil-polluted sediment sample collected from Egyptian Red Sea shoreline. The isolated bacterium is facultative anaerobe, motile, spore-former, and mesophile. It is genetically identified as Paenibacillus glucanolyticus strain HN4 (NCBI Gene Bank Accession No. MT645230). HN4 desulfurized DBT as a model of the recalcitrant thiophenic compounds without affecting its hydrocarbon skeleton via the 4S-pathway producing 2-hydroxybiphenyl (2-HBP) as a dead end product. HN4 substantiated to be a hydrocarbon tolerant, biosurfactants(s) producer, and endorsed unique enzymatic system capable of desulfurizing broad range of thiophenic compounds and expressed an efficient desulfurization activity against the recalcitrant alkylated DBTs. As far our knowledge, it is the first reported BDS study using P. glucanolyticus. Statistical optimization based on One-Factor-At-A-Time (OFAT) technique and response surface methodology (RSM) applied for elucidation of mathematical model correlations describing and optimizing the effect of different physicochemical parameters on batch biphasic BDS process. That illustrated an approximate increase in BDS efficiency by 1.34 fold and recorded 94% sulfur removal in biphasic batch process at optimum operation conditions of 120 h, 0.14 wt% S-content model oil (DBT dissolved in n-hexadecane), 33.5 °C, pH7 and 1/1 oil/water phase ratio, and 147 rpm. Resting cells of HN4 in a biphasic reactor (1/1 v/v) decreased the sulfur content of a refractory thiophenic model oil (thiophene, benzothiophene, DBT, and alkylated DBT dissolved in n-hexadecane) from 0.14 to 0.027 wt%, and petro-diesel from 0.2 to 0.04 wt%, within 120 h, keeping the calorific value of the treated fuel intact. Consequently, that novel strain could be recommended as a promising candidate for BDS as complementary to hydrodesulfurization process in oil refinery.

Desulfurization through Photocatalytic Oxidation: A Critical Review

Fuel oil, the most important strategic resource, has been widely used in industrial applications. However, the sulfur-containing compounds in fuel oil also present humanity with huge environmental issues and health concerns due to the hazardous combustion waste. To address this problem, the low vulcanization of fuel production technology has been intensively explored. Compared with traditional hydrodesulfurization technology, the newly emerged photocatalytic desulfurization has the advantages of milder operating conditions, lower energy consumption, and higher efficiency, holding great prospect to achieve deep desulfurization. Though great efforts have been made, the desulfurization catalysts still suffer from inferior light absorption, fast recombination of photocarriers, and poor structure modification. This Review summarizes recent development of photocatalytic desulfurization, including the desulfurization principle, current desulfurization challenges, and corresponding solutions. Particularly, the roles of defect engineering, hybrid coupling, and structure modifications in the enhancement of photocatalytic performance are emphasized. In addition, the photocatalytic desulfurization mechanism is also introduced with the ^. OH and ^. O₂ ^- radicals as main active species. Finally, some perspectives on the photocatalytic desulfurization are provided, which can further optimize the desulfurization efficiency and guide future photocatalyst design.

Diesel-born organosulfur compounds stimulate community re-structuring in a diesel-biodesulfurizing consortium

We enriched and characterized a biodesulfurizing consortium (designated as MG1). The MG1 consortium reduced the total sulfur of diesel by 25 % and utilized each of the diesel-born compounds dibenzothiophene (DBT), benzothiophene (BT), 4-methyldibenzothiophene (4-MDBT) and 4, 6-dimethyldibenzothiophene (4, 6-DMDBT) as a sole sulfur source. MiSeq analysis revealed compositional shifts in the MG1 community according to the type of the sulfur source. A DBT-grown MG1 culture had Klebsiella, Pseudomonas, Rhodococcus and Sphingomonas as the most abundant genera. When diesel or 4, 6-DMDBT was provided as a sole sulfur source, Klebsiella and Pseudomonas spp. were the most abundant. In the BT culture, Rhodococcus spp. were the key biodesulfurizers, while Klebsiella, Pseudomonas and Sphingomonas spp. dominated the 4-MDBT-grown consortium. MG1 also utilized 2-hydroxybiphenyl (the product of the 4S biodesulfurization pathway) where Pseudomonas spp. uniquely dominated the consortium. The data improves our understanding of the sulfur source-driven structural adaptability of biodesulfurizing consortia.

Preparation of a AgCl/PbMoO4 Composite and Investigation of Its Photocatalytic Oxidative Desulfurization Performance

PbMoO₄ materials were synthesized by the glycerol and hydrothermal methods, and AgCl nanoparticles were loaded onto the surface of PbMoO₄ by using the precipitation-deposition method. Finally, a AgCl/PbMoO₄ photocatalyst was successfully prepared. X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and UV-vis diffuse reflectance spectroscopy (UV-vis-DRS) were used to characterize the phase composition, morphology, and light absorption characteristics of the catalyst. An n-octane solution of dibenzothiophene (DBT) was used to simulate fluid catalytic cracking to make gasoline. The photocatalytic oxidation performance of DBT under visible light was studied in terms of the type of light source as well as of the catalyst, substrate, and AgCl content. The mechanism of photocatalytic oxidation was also studied. The results show that AgCl loading causes a red shift of the absorption edge of PbMoO₄, which improves the photocatalytic activity of the material. When the AgCl loading was 25.0%, the amount of catalyst was 1.5 g/L, and the visible light irradiation time was 2.0 h, the highest desulfurization rate of DBT reached 97.0%.

Biodesulfurization of Petroleum Distillates—Current Status, Opportunities and Future Challenges

Sulfur oxide (SO2) and hydrogen sulfide (H2S) are considered as one of the major air pollutants in the world today. In addition, high sulfur levels in petroleum distillates can promote the deactivation of catalysts through poisoning in fluidized catalytic cracking (FCC) during hydrocracking of the heavy distillates to lighter ones. The presence of high sulfur-containing compounds in the process streams could cause corrosion of piping and fittings and equipment, thereby damaging the pipelines and leading to air emissions of sulfur-containing compounds, which are undesirable for mankind and his environment. In many cases, a large quantity of SOx is released into the atmosphere when petroleum distillates that contain substantial amount of sulphur-containing compounds are used as fuel and combust. In this article, a short overview of different desulfurization methods that are employed to remove sulfur from petroleum distillates is provided. In particular, the review concentrates on biodesulfurization technique. In addition, this article intends to provide its readers current status of biodesulfurization (BDS). It critically analyses the trend in the development of the technology to showcase its strength and weakness that could pave a way for future opportunities. Approaches that are suitable to remediate sulfur-contaminated environment are discussed as well. Lastly, speculations on future directions or opportunities that require exploration are provided as a way of provoking the thoughts of researchers in this field.

Metabolic and process engineering for biodesulfurization in Gram-negative bacteria

Microbial desulfurization or biodesulfurization (BDS) is an attractive low-cost and environmentally friendly complementary technology to the hydrotreating chemical process based on the potential of certain bacteria to specifically remove sulfur from S-heterocyclic compounds of crude fuels that are recalcitrant to the chemical treatments. The 4S or Dsz sulfur specific pathway for dibenzothiophene (DBT) and alkyl-substituted DBTs, widely used as model S-heterocyclic compounds, has been extensively studied at the physiological, biochemical and genetic levels mainly in Gram-positive bacteria. Nevertheless, several Gram-negative bacteria have been also used in BDS because they are endowed with some properties, e.g., broad metabolic versatility and easy genetic and genomic manipulation, that make them suitable chassis for systems metabolic engineering strategies. A high number of recombinant bacteria, many of which are Pseudomonas strains, have been constructed to overcome the major bottlenecks of the desulfurization process, i.e., expression of the dsz operon, activity of the Dsz enzymes, retro-inhibition of the Dsz pathway, availability of reducing power, uptake-secretion of substrate and intermediates, tolerance to organic solvents and metals, and other host-specific limitations. However, to attain a BDS process with industrial applicability, it is necessary to apply all the knowledge and advances achieved at the genetic and metabolic levels to the process engineering level, i.e., kinetic modelling, scale-up of biphasic systems, enhancing mass transfer rates, biocatalyst separation, etc. The production of high-added value products derived from the organosulfur material present in oil can be regarded also as an economically viable process that has barely begun to be explored.