Isobutanol production from cellobiose in Escherichia coli

Microbial host engineering for sustainable isobutanol production from renewable resources

Due to the limited resources and environmental problems associated with fossil fuels, there is a growing interest in utilizing renewable resources for the production of biofuels through microbial fermentation. Isobutanol is a promising biofuel that could potentially replace gasoline. However, its production efficiency is currently limited by the use of naturally isolated microorganisms. These naturally isolated microorganisms often encounter problems such as a limited range of substrates, low tolerance to solvents or inhibitors, feedback inhibition, and an imbalanced redox state. This makes it difficult to improve their production efficiency through traditional process optimization methods. Fortunately, recent advancements in genetic engineering technologies have made it possible to enhance microbial hosts for the increased production of isobutanol from renewable resources. This review provides a summary of the strategies and synthetic biology approaches that have been employed in the past few years to improve naturally isolated or non-natural microbial hosts for the enhanced production of isobutanol by utilizing different renewable resources. Furthermore, it also discusses the challenges that are faced by engineered microbial hosts and presents future perspectives to enhancing isobutanol production. KEY POINTS: • Promising potential of isobutanol to replace gasoline • Engineering of native and non-native microbial host for isobutanol production • Challenges and opportunities for enhanced isobutanol production.

Electrical-biological hybrid system for carbon efficient isobutanol production

We have developed an electrical-biological hybrid system wherein an engineered microorganism consumes electrocatalytically produced formate from CO2 to supplement the bioproduction of isobutanol, a valuable fuel chemical. Biological CO2 sequestration is notoriously slow compared to electrochemical CO2 reduction, while electrochemical methods struggle to generate carbon-carbon bonds which readily form in biological systems. A hybrid system provides a promising method for combining the benefits of both biology and electrochemistry. Previously, Escherichia coli was engineered to assimilate formate and CO2 in central metabolism using the reductive glycine pathway. In this work, we have shown that chemical production in E. coli can benefit from single carbon substrates when equipped with the RGP. By installing the RGP and the isobutanol biosynthetic pathway into E. coli and by further genetic modifications, we have generated a strain of E. coli that can consume formate and produce isobutanol at a yield of >100% of theoretical maximum from glucose. Our results demonstrate that carbon produced from electrocatalytically reduced CO2 can bolster chemical production in E. coli. This study shows that E. coli can be engineered towards carbon efficient methods of chemical production.

Engineering Escherichia coli for Isobutanol Production from Xylose or Glucose-Xylose Mixture

Aiming to overcome the depletion of fossil fuels and serious environmental pollution, biofuels such as isobutanol have garnered increased attention. Among different synthesis methods, the microbial fermentation of isobutanol from raw substrate is a promising strategy due to its low cost and environmentally friendly and optically pure products. As an important component of lignocellulosics and the second most common sugar in nature, xylose has become a promising renewable resource for microbial production. However, bottlenecks in xylose utilization limit its wide application as substrates. In this work, an isobutanol synthetic pathway from xylose was first constructed in E. coli MG1655 through the combination of the Ehrlich and Dahms pathways. The engineering of xylose transport and electron transport chain complexes further improved xylose assimilation and isobutanol production. By optimizing xylose supplement concentration, the recombinant E. coli strain BWL4 could produce 485.35 mg/L isobutanol from 20 g/L of xylose. To our knowledge, this is the first report related to isobutanol production using xylose as a sole carbon source in E. coli. Additionally, a glucose-xylose mixture was utilized as the carbon source. The Entner-Doudorof pathway was used to assimilate glucose, and the Ehrlich pathway was applied for isobutanol production. After carefully engineering the recombinant E. coli, strain BWL9 could produce 528.72 mg/L isobutanol from a mixture of 20 g/L glucose and 10 g/L xylose. The engineering strategies applied in this work provide a useful reference for the microbial production of isobutanol from xylose or glucose-xylose mixture.

Synthesis of isobutanol using acetate as sole carbon source in Escherichia coli

BACKGROUND

With concerns about depletion of fossil fuel and environmental pollution, synthesis of biofuels such as isobutanol from low-cost substrate by microbial cell factories has attracted more and more attention. As one of the most promising carbon sources instead of food resources, acetate can be utilized by versatile microbes and converted into numerous valuable chemicals.

RESULTS

An isobutanol synthetic pathway using acetate as sole carbon source was constructed in E. coli. Pyruvate was designed to be generated via acetyl-CoA by pyruvate-ferredoxin oxidoreductase YdbK or anaplerotic pathway. Overexpression of transhydrogenase and NAD kinase increased the isobutanol titer of recombinant E. coli from 121.21 mg/L to 131.5 mg/L under batch cultivation. Further optimization of acetate supplement concentration achieved 157.05 mg/L isobutanol accumulation in WY002, representing the highest isobutanol titer by using acetate as sole carbon source.

CONCLUSIONS

The utilization of acetate as carbon source for microbial production of valuable chemicals such as isobutanol could reduce the consumption of food-based substrates and save production cost. Engineering strategies applied in this study will provide a useful reference for microbial production of pyruvate derived chemical compounds from acetate.

Strategy for efficiently utilizing Escherichia coli cells producing isobutanol by combining isobutanol and indigo production systems

Isobutanol is a potential biofuel, and its microbial production systems have demonstrated promising results. In a microbial system, the isobutanol produced is secreted into the media; however, the cells remaining after fermentation cannot be used efficiently during the isobutanol recovery process and are discarded as waste. To address this, we aimed to investigate the strategy of utilizing these remaining cells by combining the isobutanol production system with the indigo production system, wherein the product accumulates intracellularly. Accordingly, we constructed E. coli systems with genes, such as acetolactate synthase gene (alsS), ketol-acid reductoisomerase gene (ilvC), dihydroxyl-acid dehydratase (ilvD), and alpha-ketoisovalerate decarboxylase gene (kivD), for isobutanol production and genes, such as tryptophanase gene (tnaA) and flavin-containing monooxygenase gene (FMO), for indigo production. This system produced isobutanol and indigo simultaneously while accumulating indigo within cells. The production of isobutanol and indigo exhibited a strong linear correlation up to 72 h of production time; however, the pattern of isobutanol and indigo production varied. To our knowledge, this study is the first to simultaneously produce isobutanol and indigo and can potentially enhance the economy of biochemical production.

Consolidated microbial production of four-, five-, and six-carbon organic acids from crop residues: Current status and perspectives

The production of platform organic acids has been heavily dependent on petroleum-based industries. However, petrochemical-based industries that cannot guarantee a virtuous cycle of carbons released during various processes are now facing obsolescence because of the depletion of finite fossil fuel reserves and associated environmental pollutions. Thus, the transition into a circular economy in terms of the carbon footprint has been evaluated with the development of efficient microbial cell factories using renewable feedstocks. Herein, the recent progress on bio-based production of organic acids with four-, five-, and six-carbon backbones, including butyric acid and 3-hydroxybutyric acid (C4), 5-aminolevulinic acid and citramalic acid (C5), and hexanoic acid (C6), is discussed. Then, the current research on the production of C4-C6 organic acids is illustrated to suggest future directions for developing crop-residue based consolidated bioprocessing of C4-C6 organic acids using host strains with tailor-made capabilities.

Metabolic engineering of Escherichia coli for the production of isobutanol: a review

With the ongoing depletion of fossil fuel resources and emerging environmental issues, increasing research effort is being dedicated to producing biofuels from renewable substrates. With its advantages over ethanol in terms of energy density, octane number, and hygroscopicity, isobutanol is considered a potential alternative to traditional gasoline. However, as wild-type microorganisms cannot achieve the production of isobutanol with high titers and yields, rational genetic engineering has been employed to enhance its production. Herein, we review the latest developments in the metabolic engineering of Escherichia coli for the production of isobutanol, including those related to the utilization of diverse carbon sources, balancing the redox state, improving isobutanol tolerance, and application of synthetic biology circuits and tools.

Engineering of a new Escherichia coli strain efficiently metabolizing cellobiose with promising perspectives for plant biomass-based application design

The necessity to decrease our fossil energy dependence requests bioprocesses based on biomass degradation. Cellobiose is the main product released by cellulases when acting on the major plant cell wall polysaccharide constituent, the cellulose. Escherichia coli, one of the most common model organisms for the academy and the industry, is unable to metabolize this disaccharide. In this context, the remodeling of E. coli to catabolize cellobiose should thus constitute an important progress for the design of such applications. Here, we developed a robust E. coli strain able to metabolize cellobiose by integration of a small set of modifications in its genome. Contrary to previous studies that use adaptative evolution to achieve some growth on this sugar by reactivating E. coli cryptic operons coding for cellobiose metabolism, we identified easily insertable modifications impacting the cellobiose import (expression of a gene coding a truncated variant of the maltoporin LamB, modification of the expression of lacY encoding the lactose permease) and its intracellular degradation (genomic insertion of a gene encoding either a cytosolic β-glucosidase or a cellobiose phosphorylase). Taken together, our results provide an easily transferable set of mutations that confers to E. coli an efficient growth phenotype on cellobiose (doubling time of 2.2 ​h in aerobiosis) without any prior adaptation.

Heterologous Expression of Lignocellulose-Modifying Enzymes in Microorganisms: Current Status

Heterologous expression of the carbohydrate-active enzymes in microorganisms is a promising approach to produce bio-based compounds, such as fuels, nutraceuticals and other value-added products from sustainable lignocellulosic sources. Several microorganisms, including Saccharomyces cerevisiae, Escherichia coli, and the filamentous fungi Aspergillus nidulans, have unique characteristics desirable for a biorefinery production approach like well-known genetic tools, thermotolerance, high fermentative capacity and product tolerance, and high amount of recombinant enzyme secretion. These microbial factories are already stablished in the heterologous production of the carbohydrate-active enzymes to produce, among others, ethanol, xylooligosaccharides and the valuable coniferol. A complete biocatalyst able to heterologous express the CAZymes of glycoside hydrolases, carbohydrate esterases and auxiliary activities families could release these compounds faster, with higher yield and specificity. Recent advances in the synthetic biology tools could expand the number and diversity of enzymes integrated in these microorganisms, and also modify those already integrated. This review outlines the heterologous expression of carbohydrate-active enzymes in microorganisms, as well as recent updates in synthetic biology.

Biorefinery: The Production of Isobutanol from Biomass Feedstocks

Environmental issues have prompted the vigorous development of biorefineries that use agricultural waste and other biomass feedstock as raw materials. However, most current biorefinery products are cellulosic ethanol. There is an urgent need for biorefineries to expand into new bioproducts. Isobutanol is an important bulk chemical with properties that are close to gasoline, making it a very promising biofuel. The use of microorganisms to produce isobutanol has been extensively studied, but there is still a considerable gap to achieving the industrial production of isobutanol from biomass. This review summarizes current metabolic engineering strategies that have been applied to biomass isobutanol production and recent advances in the production of isobutanol from different biomass feedstocks.

Metabolic engineering of Escherichia coli W for isobutanol production on chemically defined medium and cheese whey as alternative raw material

The aim of this study was to establish isobutanol production on chemically defined medium in Escherichia coli. By individually expressing each gene of the pathway, we constructed a plasmid library for isobutanol production. Strain screening on chemically defined medium showed successful production in the robust E. coli W strain, and expression vector IB 4 was selected as the most promising construct due to its high isobutanol yields and efficient substrate uptake. The investigation of different aeration strategies in combination with strain improvement and the implementation of a pulsed fed-batch were key for the development of an efficient production process. E. coli W ΔldhA ΔadhE Δpta ΔfrdA enabled aerobic isobutanol production at 38% of the theoretical maximum. Use of cheese whey as raw material resulted in longer process stability, which allowed production of 20 g l⁻¹ isobutanol. Demonstrating isobutanol production on both chemically defined medium and a residual waste stream, this study provides valuable information for further development of industrially relevant isobutanol production processes.

Metabolic engineering of E. coli for improving mevalonate production to promote NADPH regeneration and enhance acetyl-CoA supply

Microbial production of mevalonate from renewable feedstock is a promising and sustainable approach for the production of value-added chemicals. We describe the metabolic engineering of Escherichia coli to enhance mevalonate production from glucose and cellobiose. First, the mevalonate-producing pathway was introduced into E. coli and the expression of the gene atoB, which encodes the gene for acetoacetyl-CoA synthetase, was increased. Then, the deletion of the pgi gene, which encodes phosphoglucose isomerase, increased the NADPH/NADP⁺ ratio in the cells but did not improve mevalonate production. Alternatively, to reduce flux toward the tricarboxylic acid cycle, gltA, which encodes citrate synthetase, was disrupted. The resultant strain, MGΔgltA-MV, increased levels of intracellular acetyl-CoA up to sevenfold higher than the wild-type strain. This strain produced 8.0 g/L of mevalonate from 20 g/L of glucose. We also engineered the sugar supply by displaying β-glucosidase (BGL) on the cell surface. When cellobiose was used as carbon source, the strain lacking gnd displaying BGL efficiently consumed cellobiose and produced mevalonate at 5.7 g/L. The yield of mevalonate was 0.25 g/g glucose (1 g of cellobiose corresponds to 1.1 g of glucose). These results demonstrate the feasibility of producing mevalonate from cellobiose or cellooligosaccharides using an engineered E. coli strain.

Theophylline-inducible riboswitch accurately regulates protein expression at low level in Escherichia coli

OBJECTIVES

Fine-tuning of enzyme expression at low levels is an important challenge for metabolic engineers. Here, theophylline-inducible riboswitch for translational regulation was evaluated. The background expression, translation rate, and time delay for its induction was reported.

RESULTS

To evaluate the effect of the amount of mRNA on its translation rate, transcription of the riboswitch RNA with red fluorescent protein (RFP) was controlled by the lac system with addition of isopropyl β-D-1-thiogalactopyranoside in Escherichia coli. Regardless of the amount of riboswitch mRNA, the translation of RFP was completely suppressed without theophylline during both growth and stationary phases. Furthermore, a strong positive correlation between theophylline concentration (0 to 1 mM) and specific RFP production rate was observed. The specific RFP production rate with the riboswitch was approximately 2.3% of that without the riboswitch. Furthermore, 60 min of time delay for RFP expression was observed after adding theophylline during the stationary phase.

CONCLUSION

Theophylline-inducible riboswitch precisely controls protein translation at low expression levels with significantly low background expression. It can emerge as a powerful tool for fine tuning of enzyme expression.

Resting cells isobutanol production by Shimwellia blattae (p424IbPSO): Influence of growth culture conditions

Isobutanol is a promising gasoline additive and could even be a potential substitute used directly as combustible. In this work, the production of isobutanol from glucose by Shimwellia blattae (p424IbPSO) in resting cell cultures is studied. This production has two stages, involving a resting cell phase that has not been studied before. The cell growth was carried out under different operating conditions: temperature and medium composition (YE, ammonium, and IPTG concentrations), looking for the highest isobutanol production. Moreover, the cells were collected at three different growth times checking their isobutanol production capacity. The best operating conditions have been determined as: 30°C of temperature, a medium containing 1.5 g L^-1 YE and 1.4 g L^-1 of ammonium as nitrogen sources, adding 0.5 mM IPTG as inducer. The cells collected at early growth times are significantly more active. The use of S. blattae (p424IbPSO) in resting cells is a good strategy for the production of isobutanol from glucose yielding better results than in batch growth cultures, a yield of 60% attainment of theoretical maximum yield is obtained under optimal conditions. In addition, it has been demonstrated that if the cells are cultured at higher temperatures and with high IPTG concentrations, inclusion bodies are formed in the cytoplasm inhibiting the isobutanol production in the resting cell stage.

Synthesis of chemicals by metabolic engineering of microbes

Metabolic engineering is a powerful tool for the sustainable production of chemicals. Over the years, the exploration of microbial, animal and plant metabolism has generated a wealth of valuable genetic information. The prudent application of this knowledge on cellular metabolism and biochemistry has enabled the construction of novel metabolic pathways that do not exist in nature or enhance existing ones. The hand in hand development of computational technology, protein science and genetic manipulation tools has formed the basis of powerful emerging technologies that make the production of green chemicals and fuels a reality. Microbial production of chemicals is more feasible compared to plant and animal systems, due to simpler genetic make-up and amenable growth rates. Here, we summarize the recent progress in the synthesis of biofuels, value added chemicals, pharmaceuticals and nutraceuticals via metabolic engineering of microbes.

Recent progress in biobutanol tolerance in microbial systems with an emphasis on Clostridium

Biobased production of butanol promises a more sustainable route for industrial production. However, butanol toxicity remains a barrier for achieving high product titers. Investigation into butanol stress has shed some light on its modes of toxicity. Unfortunately, there still remain significant shortfalls in our understanding of the complex interactions of butanol with cells. To address this knowledge gap, a diverse range of tools have been employed to gain a better understanding of the adverse effects of butanol on the cell. These findings have lead to the identification of possible molecular mechanisms associated with butanol tolerance, which can be harnessed for future strain development efforts. This review focuses on recent efforts to address the toxicity of butanol in microbial producers and offers some perspectives on the future direction of this research sector.

Cell surface engineering of industrial microorganisms for biorefining applications

In order to decrease carbon emissions and negative environmental impacts of various pollutants, biofuel/biochemical production should be promoted for replacing fossil-based industrial processes. Utilization of abundant lignocellulosic biomass as a feedstock has recently become an attractive option. In this review, we focus on recent efforts of cell surface display using industrial microorganisms such as Escherichia coli and yeast. Cell surface display is used primarily for endowing cellulolytic activity on the host cells, and enables direct fermentation to generate useful fuels and chemicals from lignocellulosic biomass. Cell surface display systems are systematically summarized, and the drawbacks/perspectives as well as successful application of surface display for industrial biotechnology are discussed.

Isobutanol production from cellobionic acid in Escherichia coli

Background

Liquid fuels needed for the global transportation industry can be produced from sugars derived from plant-based lignocellulosics. Lignocellulosics contain a range of sugars, only some of which (such as cellulose) have been shown to be utilizable by microorganisms capable of producing biofuels. Cellobionic acid makes up a small but significant portion of lignocellulosic degradation products, and had not previously been investigated as an utilizable substrate. However, aldonic acids such as cellobionic acid are the primary products of a promising new group of lignocellulosic-degrading enzymes, which makes this compound group worthy of study. Cellobionic acid doesn’t inhibit cellulose degradation enzymes and so its inclusion would increase lignocellulosic degradation efficiency. Also, its use would increase overall product yield from lignocellulose substrate. For these reasons, cellobionic acid has gained increased attention for cellulosic biofuel production.

Results

This study describes the discovery that Escherichia coli are naturally able to utilize cellobionic acid as a sole carbon source with efficiency comparable to that of glucose and the construction of an E. coli strain able to produce the drop-in biofuel candidate isobutanol from cellobionic acid. The gene primarily responsible for growth of E. coli on cellobionic acid is ascB, a gene previously thought to be cryptic (expressed only after incurring specific mutations in nearby regulatory genes). In addition to AscB, the ascB knockout strain can be complemented by the cellobionic acid phosphorylase from the fungus Neurospora crassa. An E. coli strain engineered to express the isobutanol production pathway was successfully able to convert cellobionic acid into isobutanol. Furthermore, to demonstrate potential application of this strain in a sequential two-step bioprocessing system, E. coli was grown on hydrolysate (that was degraded by a fungus) and was successfully able to produce isobutanol.

Conclusions

These results demonstrate that cellobionic acid is a viable carbon source for biofuel production. This work suggests that with further optimization, a bacteria-fungus co-culture could be used in decreased-cost biomass-based biofuel production systems.

Construction of Escherichia Coli Cell Factories for Production of Organic Acids and Alcohols

Production of bulk chemicals from renewable biomass has been proved to be sustainable and environmentally friendly. Escherichia coli is the most commonly used host strain for constructing cell factories for production of bulk chemicals since it has clear physiological and genetic characteristics, grows fast in minimal salts medium, uses a wide range of substrates, and can be genetically modified easily. With the development of metabolic engineering, systems biology, and synthetic biology, a technology platform has been established to construct E. coli cell factories for bulk chemicals production. In this chapter, we will introduce this technology platform, as well as E. coli cell factories successfully constructed for production of organic acids and alcohols.

2-Keto acids based biosynthesis pathways for renewable fuels and chemicals

Global energy and environmental concerns have driven the development of biological chemical production from renewable sources. Biological processes using microorganisms are efficient and have been traditionally utilized to convert biomass (i.e., glucose) to useful chemicals such as amino acids. To produce desired fuels and chemicals with high yield and rate, metabolic pathways have been enhanced and expanded with metabolic engineering and synthetic biology approaches. 2-Keto acids, which are key intermediates in amino acid biosynthesis, can be converted to a wide range of chemicals. 2-Keto acid pathways were engineered in previous research efforts and these studies demonstrated that 2-keto acid pathways have high potential for novel metabolic routes with high productivity. In this review, we discuss recently developed 2-keto acid-based pathways.

Ag43-mediated display of a thermostable β-glucosidase in Escherichia coli and its use for simultaneous saccharification and fermentation at high temperatures

Background

The autotransporter (AT) system can potentially be used in the secretion of saccharolytic enzymes for the production of lignocellulosic biofuels and chemicals using Escherichia coli. Although ATs share similar structural characteristics, their capacity for secreting heterologous proteins widely varies. Additionally, the saccharolytic enzyme selected to be secreted should match the cell growth or cell fermentation conditions of E. coli.

Results

In the search for an AT that suits the physiological performance of the homo-ethanologenic E. coli strain MS04, an expression plasmid based on the AT antigen 43 (Ag43) from E. coli was developed. The β-glucosidase BglC from the thermophile bacterium Thermobifida fusca was displayed on the outer membrane of the E. coli strain MS04 using the Ag43 system (MS04/pAg43BglC). This strain was used to hydrolyze and ferment 40 g/L of cellobiose in mineral media to produce 16.65 g/L of ethanol in 48 h at a yield of 81% of the theoretical maximum. Knowing that BglC shows its highest activity at 50°C and retains more than 70% of its activity at pH 6, therefore E. coli MS04/pAg43BglC was used to ferment crystalline cellulose (Avicel) in a simultaneous saccharification and fermentation (SSF) process using a commercial cocktail of cellulases (endo and exo) at pH 6 and at a relatively high temperature for E. coli (45°C). As much as 22 g/L of ethanol was produced in 48 h.

Conclusions

The Ag43-BglC system can be used in E. coli strains without commercial β-glucosidases, reducing the quantities of commercial enzymes needed for the SSF process. Furthermore, the present work shows that E. coli cells are able to ferment sugars at 45°C during the SSF process using 40 g/L of Avicel, reducing the gap between the working conditions of the commercial saccharolytic enzymes and ethanologenic E. coli.