Applications of bacterial cellulose and its composites in biomedicine

Synthesis, functionalization, and commercial application of cellulose-based nanomaterials

In recent times, cellulose, an abundant and renewable biopolymer, has attracted considerable interest due to its potential applications in nanotechnology. This review explores the latest developments in cellulose-based nanomaterial synthesis, functionalization, and commercial applications. Beginning with an overview of the diverse sources of cellulose and the methods employed for its isolation and purification, the review delves into the various techniques used for the synthesis of cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), highlighting their unique properties and potential applications. Furthermore, the functionalization strategies employed to enhance the properties and tailor the functionalities of cellulose-based nanomaterials were discussed. The review also provides insights into the emerging commercial applications of cellulose-based nanomaterials across diverse sectors, including packaging, biomedical engineering, textiles, and environmental remediation. Finally, challenges and prospects for the widespread adoption of cellulose-based nanomaterials are outlined, emphasizing the need for further research and development to unlock their full potential in sustainable and innovative applications.

Characterization of active films based on chitosan/polyvinyl alcohol integrated with ginger essential oil-loaded bacterial cellulose and application in sea bass (Lateolabrax japonicas) packaging

The poor mechanical properties, low water-resistance, and limited antimicrobial activity of chitosan (CS)/polyvinyl alcohol (PVA) based film limited its application in aquatic product preservation. Herein, bacterial cellulose (BC) was used to load ginger essential oil (GEO). The effects of the addition of BC and different concentrations of GEO on the physicochemical and antimicrobial activities of films were systematically evaluated. Finally, the application of sea bass fillets was investigated. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis (XRD) analysis indicated dense networks were formed, which was verified by enhanced physical properties. The mechanical properties, barrier properties, and antimicrobial activities enhanced as GEO concentration increased. CPB0.8 (0.8 % GEO) film had better tensile strength (TS) and barrier performance, improved the quality, and extended the shelf-life of sea bass for another 6 days at least. Overall, active films are potential packaging materials for aquatic products.

Biological scaffold as potential platforms for stem cells: Current development and applications in wound healing

Wound repair is a complex challenge for both clinical practitioners and researchers. Conventional approaches for wound repair have several limitations. Stem cell-based therapy has emerged as a novel strategy to address this issue, exhibiting significant potential for enhancing wound healing rates, improving wound quality, and promoting skin regeneration. However, the use of stem cells in skin regeneration presents several challenges. Recently, stem cells and biomaterials have been identified as crucial components of the wound-healing process. Combination therapy involving the development of biocompatible scaffolds, accompanying cells, multiple biological factors, and structures resembling the natural extracellular matrix (ECM) has gained considerable attention. Biological scaffolds encompass a range of biomaterials that serve as platforms for seeding stem cells, providing them with an environment conducive to growth, similar to that of the ECM. These scaffolds facilitate the delivery and application of stem cells for tissue regeneration and wound healing. This article provides a comprehensive review of the current developments and applications of biological scaffolds for stem cells in wound healing, emphasizing their capacity to facilitate stem cell adhesion, proliferation, differentiation, and paracrine functions. Additionally, we identify the pivotal characteristics of the scaffolds that contribute to enhanced cellular activity.

Functionalization of bacterial cellulose: Exploring diverse applications and biomedical innovations: A review

The demand for the functionalization of additive materials based on bacterial cellulose (BC) is currently high due to their potential applications across various sectors. The preparation of BC-based additive materials typically involves two approaches: in situ and ex situ. In situ modifications entail the incorporation of additive materials, such as soluble and dispersed substances, which are non-toxic and not essential for bacterial cell growth during the production process. However, these materials can impact the yield and self-assembly of BC. In contrast, ex situ modification occurs subsequent to the formation of BC, where the additive materials are not only adsorbed on the surface but also impregnated into the BC pellicle, while the BC slurry was homogenized with other additive materials and gelling agents to create composite films using the casting method. This review will primarily focus on the in situ and ex situ functionalization of BC then sheds light on the pivotal role of functionalized BC in advancing biomedical technologies, wound healing, tissue engineering, drug delivery, bone regeneration, and biosensors.

An overview to nanocellulose clinical application: Biocompatibility and opportunities in disease treatment

Recently, the demand for organ transplantation has promptly increased due to the enhanced incidence of body organ failure, the increasing efficiency of transplantation, and the improvement in post-transplant outcomes. However, due to a lack of suitable organs for transplantation to fulfill current demand, significant organ shortage problems have emerged. Developing efficient technologies in combination with tissue engineering (TE) has opened new ways of producing engineered tissue substitutes. The use of natural nanoparticles (NPs) such as nanocellulose (NC) and nano-lignin should be used as suitable candidates in TE due to their desirable properties. Many studies have used these components to form scaffolds and three-dimensional (3D) cultures of cells derived from different tissues for tissue repair. Interestingly, these natural NPs can afford scaffolds a degree of control over their characteristics, such as modifying their mechanical strength and distributing bioactive compounds in a controlled manner. These bionanomaterials are produced from various sources and are highly compatible with human-derived cells as they are derived from natural components. In this review, we discuss some new studies in this field. This review summarizes the scaffolds based on NC, counting nanocrystalline cellulose and nanofibrillated cellulose. Also, the efficient approaches that can extract cellulose with high purity and increased safety are discussed. We concentrate on the most recent research on the use of NC-based scaffolds for the restoration, enhancement, or replacement of injured organs and tissues, such as cartilage, skin, arteries, brain, and bone. Finally, we suggest the experiments and promises of NC-based TE scaffolds.

Advances in drug delivery applications of modified bacterial cellulose-based materials

Bacterial cellulose (BC) is generated by certain species of bacteria and comprises polysaccharides with unique physical, chemical, and mechanical characteristics. Due to its outstanding biocompatibility, high purity, excellent mechanical strength, high water absorption, and highly porous structure, bacterial cellulose has been recently investigated for biomedical application. However, the pure form of bacterial cellulose is hardly used as a biomedical material due to some of its inherent shortcomings. To extend its applications in drug delivery, modifications of native bacterial cellulose are widely used to improve its properties. Usually, bacterial cellulose modifications can be carried out by physical, chemical, and biological methods. In this review, a brief introduction to bacterial cellulose and its production and fabrication is first given, followed by up-to-date and in-depth discussions of modification. Finally, we focus on the potential applications of bacterial cellulose as a drug delivery system.

An introductory review on advanced multifunctional materials

This review summarizes the applications of some of the advanced materials. It included the synthesis of several nanoparticles such as metal oxide nanoparticles (e.g., Fe₃O₄, ZnO, ZrOSO₄, MoO_3-x, CuO, AgFeO₂, Co₃O₄, CeO₂, SiO₂, and CuFeO₂); metal hydroxide nanosheets (e.g., Zn₅(OH)₈(NO₃)₂·2H₂O, Zn(OH)(NO₃)·H₂O, and Zn₅(OH)₈(NO₃)₂); metallic nanoparticles (Ag, Au, Pd, and Pt); carbon-based nanomaterials (graphene, graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and carbon dots (CDs)); biopolymers (cellulose, nanocellulose, TEMPO-oxidized cellulose nanofibers (TOCNFs), and chitosan); organic polymers (e.g. covalent-organic frameworks (COFs)); and hybrid materials (e.g. metal-organic frameworks (MOFs)). Most of these materials were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing, biosensing, cancer therapy, and drug delivery). They can be used as efficient adsorbents and catalysts to remove emerging contaminants e.g., inorganic (i.e., heavy metals) and organic (e.g., dyes, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation reactions such as redox reactions of pollutants. They can be used as filters for air purification by capturing carbon dioxide (CO₂) and volatile organic compounds (VOCs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH₄. Nanomedicine for some of these materials was also included being an effective agent as an antibacterial, nanocarrier for drug delivery, and probe for biosensing.

Bacterial cellulose-based composites as vehicles for dermal and transdermal drug delivery: A review

In recent years, a significant amount of drugs have been taken orally, which are not as effective as desired. To solve this problem, bacterial cellulose-based dermal/transdermal drug delivery systems (BC-DDSs) with unique properties such as cell compatibility, hemocompatibility, tunable mechanical properties, and the ability to encapsulate various therapeutic agents with the controlled release have been introduced. A BC-dermal/transdermal DDS reduces first-pass metabolism and systematic side effects while improving patient compliance and dosage effectiveness by controlling drug release through the skin. The barrier function of the skin, especially the stratum corneum, can interfere with drug delivery. Few drugs can pass through the skin to reach effective concentrations in the blood to treat diseases. Due to their unique physicochemical properties and high potential to reduce immunogenicity and improve bioavailability, BC-dermal/transdermal DDSs are widely used to deliver various types of drugs for disease treatment. In this review, we describe the different types of BC-dermal/ transdermal DDSs, along with a critical discussion of the advantages and disadvantages of these systems. After the general presentation, the review is focused on recent advances in the preparation and applications of BC-based dermal/transdermal DDSs in various types of disease treatment.

Hybrid Silver-Containing Materials Based on Various Forms of Bacterial Cellulose: Synthesis, Structure, and Biological Activity

Sustained interest in the use of renewable resources for the production of medical materials has stimulated research on bacterial cellulose (BC) and nanocomposites based on it. New Ag-containing nanocomposites were obtained by modifying various forms of BC with Ag nanoparticles prepared by metal-vapor synthesis (MVS). Bacterial cellulose was obtained in the form of films (BCF) and spherical BC beads (SBCB) by the Gluconacetobacter hansenii GH-1/2008 strain under static and dynamic conditions. The Ag nanoparticles synthesized in 2-propanol were incorporated into the polymer matrix using metal-containing organosol. MVS is based on the interaction of extremely reactive atomic metals formed by evaporation in vacuum at a pressure of 10^-2 Pa with organic substances during their co-condensation on the cooled walls of a reaction vessel. The composition, structure, and electronic state of the metal in the materials were characterized by transmission and scanning electron microscopy (TEM, SEM), powder X-ray diffraction (XRD), small-angle X-ray scattering (SAXS) and X-ray photoelectron spectroscopy (XPS). Since antimicrobial activity is largely determined by the surface composition, much attention was paid to studying its properties by XPS, a surface-sensitive method, at a sampling depth about 10 nm. C 1s and O 1s spectra were analyzed self-consistently. XPS C 1s spectra of the original and Ag-containing celluloses showed an increase in the intensity of the C-C/C-H groups in the latter, which are associated with carbon shell surrounding metal in Ag nanoparticles (Ag NPs). The size effect observed in Ag 3d spectra evidenced on a large proportion of silver nanoparticles with a size of less than 3 nm in the near-surface region. Ag NPs in the BC films and spherical beads were mainly in the zerovalent state. BC-based nanocomposites with Ag nanoparticles exhibited antimicrobial activity against Bacillus subtilis, Staphylococcus aureus, Escherichia coli bacteria and Candida albicans and Aspergillus niger fungi. It was found that AgNPs/SBCB nanocomposites are more active than Ag NPs/BCF samples, especially against Candida albicans and Aspergillus niger fungi. These results increase the possibility of their medical application.

Opportunities for bacterial nanocellulose in biomedical applications: Review on biosynthesis, modification and challenges

Bacterial nanocellulose (BNC) is a natural polysaccharide produced as extracellular material by bacterial strains and has favorable intrinsic properties for primary use in biomedical applications. In this review, an update on state-of-the art and challenges in BNC production, surface modification and biomedical application is given. Recent insights in biosynthesis allowed for better understanding of governing parameters improving production efficiency. In particular, introduction of different carbon/nitrogen sources from alternative feedstock and industrial upscaling of various production methods is challenging. It is important to have control on the morphology, porosity and forms of BNC depending on biosynthesis conditions, depending on selection of bacterial strains, reactor design, additives and culture conditions. The BNC is intrinsically characterized by high water absorption capacity, good thermal and mechanical stability, biocompatibility and biodegradability to certain extent. However, additional chemical and/or physical surface modifications are required to improve cell compatibility, protein interaction and antimicrobial properties. The novel trends in synthesis include the in-situ culturing of hybrid BNC nanocomposites in combination with organic material, inorganic material or extracellular components. In parallel with toxicity studies, the applications of BNC in wound care, tissue engineering, medical implants, drug delivery systems or carriers for bioactive compounds, and platforms for biosensors are highlighted.

Bacterial Cellulose-Based Materials as Dressings for Wound Healing

Bacterial cellulose (BC) is produced by several microorganisms as extracellular structures and can be modified by various physicochemical and biological strategies to produce different cellulosic formats. The main advantages of BC for biomedical applications can be summarized thus: easy moldability, purification, and scalability; high biocompatibility; and straightforward tailoring. The presence of a high amount of free hydroxyl residues, linked with water and nanoporous morphology, makes BC polymer an ideal candidate for wound healing. In this frame, acute and chronic wounds, associated with prevalent pathologies, were addressed to find adequate therapeutic strategies. Hence, the main characteristics of different BC structures-such as membranes and films, fibrous and spheroidal, nanocrystals and nanofibers, and different BC blends, as well as recent advances in BC composites with alginate, collagen, chitosan, silk sericin, and some miscellaneous blends-are reported in detail. Moreover, the development of novel antimicrobial BC and drug delivery systems are discussed.

SCOBY Cellulose Modified with Apple Powder-Biomaterial with Functional Characteristics

The need for new non-animal and non-petroleum-based materials is strongly emphasized in the sustainable and green economy. Waste materials have proven a valuable resource in this regard. In fact, there have been quite a large number of goods obtained from wastes called "Vegan leather" that have gained the clothing market's attention in recent years. In practice, they are mostly composites of waste materials like cactus, pineapples, or, eventually, apples with polymers like polyurethane or polyvinyl chloride. The article presents the results of work aimed at obtaining a material based entirely on natural, biodegradable raw materials. Bacterial cellulose produced as a byproduct of the fermentation carried out by SCOBY was modified with glycerol and then altered by the entrapment of apple powder. The effect of introducing apple powder into the SCOBY culture media on the mechanical properties of the obtained bacterial cellulose was also evaluated The resulting material acquired new mechanical characteristics that are advantageous in terms of strength. Microscopic observation of the apple powder layer showed that the coverage was uniform. Different amounts of apple powder were used to cover the cellulose surface from 10 to 60%, and it was found that the variant with 40% of this powder was the most favorable in terms of mechanical strength. Also, the application of the created material as a card folder showed that it is durable in use and retains its functional characteristics for at least 1 month. The mechanical properties of modified bacterial cellulose were favorably affected by the entrapment of apple powder on its surface, and as a result, a novel material with functional characteristics was obtained.

Bacterial Cellulose Cultivations Containing Gelatin Form Tunable, Highly Ordered, Laminae Structures with Fourfold Enhanced Productivity

Manipulation of bacterial cellulose (BC) morphology is important to tune BC properties to meet specific application requirements. In this study, gelatin was added to cultivation media at 0.1-7.5 wt %. After cultivations, gelatin was removed from the BC matrix, and its effects on BC matrix characteristics and fermentation production efficiency were determined. Higher contents of gelatin in cultivation media (up to 5%) resulted in BC that, from scanning electron microscopy observations, had larger pore sizes and formation of a lamina morphology that was highly unidirectional. Crystallinity remained unchanged between 0.1 and 5 wt % gelatin concentrations (92-95%); however, it decreased to 86% at a gelatin concentration of 7.5 wt %. Mechanical properties showed a positive trend as both the specific modulus and specific strength values increased as the gelatin concentration increased to 5 wt %. A breakdown in the ordered structure of the BC matrix occurs at 7.5 wt % gelatin, with corresponding decreases in the specific modulus and specific strength of the BC. The productivity increased by almost 4-fold relative to the control, reaching 1.64 g·L^-1h^-1 at the 2.5 wt % gelatin content. Also, the water holding capacity increased by 3-fold relative to the control, reaching 306.6 g of water per g BC at the 5.0 wt % gelatin content. The changes observed in these BC metrics can be explained based on literature findings associated with the formation of gelatin aggregates in the cultivation media and an increase in gel stiffness seen at higher media gelatin concentrations. Overall, this work provides a roadmap for manipulating BC properties while creating highly organized lamina morphologies.

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV))/Bacterial Cellulose (BC) Biocomposites for Potential Use in Biomedical Applications

The aim of this study was to obtain biocomposites consisting of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), bacterial cellulose (BC) and α-tocopherol by a melt processing technique for potential use in biomedical applications. The melt processing and roughness of biocomposites were evaluated and compared to sample without BC. The degradation rate of PHBV/BC biocomposites was measured in phosphate buffer saline (PBS) by determining the mass variation and evidencing of thermal and structural changes by differential scanning calorimetry (DSC) and attenuated total reflectance-Fourier transformed infrared spectrometry (ATR-FTIR). The cell viability, cell morphology, cell cycle distribution and total collagen content were investigated on murine NCTC fibroblasts. Overall, the adding of BC to polyester matrix led to an adequate melt processing of biocomposites and increased surface roughness and cytocompatibility, allowing the cells to secrete the extracellular matrix (collagen) and stimulate cell proliferation. Results showed that the PHBV/BC biocomposites were favorable for long-term degradation and could be used for the design of medical devices with controlled degradability.

Exploitation of cantaloupe peels for bacterial cellulose production and functionalization with green synthesized Copper oxide nanoparticles for diverse biological applications

The promising features of most bacterial celluloses (BC) promote the continuous mining for a cost-effective production approach toward wide and sustainable applications. Herein, cantaloupe peels (CP) were successfully implemented for sustainable BC production. Results indicated that the enzymatically hydrolyzed CP supported the maximum BC production of approximately 3.49 g/L when used as a sole fermentation media. The produced BC was fabricated with polyvinyl alcohol (PVA) and chitosan (Ch), and loaded with green synthesized copper oxide nanoparticles (CuO-NPs) to improve its biological activity. The novel composite showed an antimicrobial activity against several human pathogens such as Staphylococcus aureus, Streptococcus mutans, Salmonella typhimurium, Escherichia coli, and Pseudomonas fluorescens. Furthermore, the new composite revealed a significant in vitro anticancer activity against colon (Caco-2), hepatocellular (HepG-2), and breast (MDA) cancer cells, with low IC₅₀ of 0.48, 0.27, and 0.33 mg/mL for the three cell lines, respectively. On the other hand, the new composite was remarkably safe for human skin fibroblast (HSF) with IC₅₀ of 1.08 mg/mL. Interestingly, the composite membranes exhibited lethal effects against all stages of larval instar and pupal stage compared with the control. In this study, we first report the diverse potential applications of BC/PVA/Ch/CuO-NPs composites based on green synthesized CuO-NPs and sustainably produced BC membrane.

Bacterial cellulose production by Novacetimonas hansenii MSCL 1646 on apple juice

Biomaterials and biopolymers, such as bacterial cellulose (BC), are becoming increasingly important as sustainable materials with a wide range of potential applications. However, BC industrial production is associated with several difficulties such as low BC production yields and high production costs; therefore, cheap alternative growth media, e.g. apple juice are being studied intensively. The aim of this study is to evaluate BC synthesis under static conditions on apple juice medium (AJM). The optimal concentration of apple juice in unsupplemented AJM for Novacetimonas hansenii MSCL 1646 was shown by its dilution 1:6 with water, which resulted in 0.89 ± 0.01 g/L of dry BC weight after 10 cultivation days. Low BC synthesis can be associated with insufficient N concentration in apple juice; therefore, different organic and inorganic N sources were evaluated in combination with AJM, and beef extract (5 g/L) was found to be the most suitable. Further, AJM optimisation experiment showed the optimal apple juice and beef extract concentrations as 1:2 and 15 g/L respectively, which resulted in 17.27 ± 0.07 g/L of dry BC weight, which is significantly higher than in standard Hestrin-Schramm (HS) medium (4.07 ± 0.02 g/L). Analysis of mechanical and physical properties showed that use of AJM results in changes in BC properties compared with the standard HS medium. Results of the study indicate that apple juice is an effective and cheap C source that in combination with appropriate N source leads to high BC synthesis and makes it suitable for industrial BC production. KEY POINTS: • Low quality apples can be used as raw material for BC production; • Beef extract improves BC synthesis in apple juice medium; • Use of apple juice and beef extract affect mechanical properties of BC.

Enhancing bacterial cellulose production with hypoxia-inducible factors

Komagataeibacter xylinus is an aerobic strain that produces bacterial cellulose (BC). Oxygen levels play a critical role in regulating BC synthesis in K. xylinus, and an increase in oxygen tension generally means a decrease in BC production. Fumarate nitrate reduction protein (FNR) and aerobic respiration control protein A (ArcA) are hypoxia-inducible factors, which can signal whether oxygen is present in the environment. In this study, FNR and ArcA were used to enhance the efficiency of oxygen signaling in K. xylinus, and globally regulate the transcription of the genome to cope with hypoxic conditions, with the goal of improving growth and BC production. FNR and ArcA were individually overexpressed in K. xylinus, and the engineered strains were cultivated under different oxygen tensions to explore how their overexpression affects cellular metabolism and regulation. Although FNR overexpression did not improve BC production, ArcA overexpression increased BC production by 24.0% and 37.5% as compared to the control under oxygen tensions of 15% and 40%, respectively. Transcriptome analysis showed that FNR and ArcA overexpression changed the way K. xylinus coped with oxygen tension changes, and that both FNR and ArcA overexpression enhanced the BC synthesis pathway. The results of this study provide a new perspective on the effect of oxygen signaling on growth and BC production in K. xylinus and suggest a promising strategy for enhancing BC production through metabolic engineering. KEY POINTS: • K. xylinus BC production increased after overexpression of ArcA • The young's modulus is enhanced by the ArcA overexpression • ArcA and FNR overexpression changed how cells coped with changes in oxygen tension.

Highly Aligned Bacterial Nanocellulose Films Obtained During Static Biosynthesis in a Reproducible and Straightforward Approach

Bacterial nanocellulose (BNC) is usually produced as randomly-organized highly pure cellulose nanofibers films. Its high water-holding capacity, porosity, mechanical strength, and biocompatibility make it unique. Ordered structures are found in nature and the properties appearing upon aligning polymers fibers inspire everyone to achieve highly aligned BNC (A-BNC) films. This work takes advantage of natural bacteria biosynthesis in a reproducible and straightforward approach. Bacteria confined and statically incubated biosynthesized BNC nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume confirmed by polarization-resolved second-harmonic generation signal and Small Angle X-ray Scattering. The biosynthesis approach is improved by reusing the bacterial substrates to obtain A-BNC reproducibly and repeatedly. The suitability of A-BNC as cell carriers is confirmed by adhering to and growing fibroblasts in the substrate. Finally, the thermal conductivity is evaluated by two independent approaches, i.e., using the well-known 3ω-method and a recently developed contactless thermoreflectance approach, confirming a thermal conductivity of 1.63 W mK^-1 in the direction of the aligned fibers versus 0.3 W mK^-1 perpendicularly. The fivefold increase in thermal conductivity of BNC in the alignment direction forecasts the potential of BNC-based devices outperforming some other natural polymer and synthetic materials.

Bacterial Cellulose as a Versatile Biomaterial for Wound Dressing Application

Chronic ulcers are among the main causes of morbidity and mortality due to the high probability of infection and sepsis and therefore exert a significant impact on public health resources. Numerous types of dressings are used for the treatment of skin ulcers-each with different advantages and disadvantages. Bacterial cellulose (BC) has received enormous interest in the cosmetic, pharmaceutical, and medical fields due to its biological, physical, and mechanical characteristics, which enable the creation of polymer composites and blends with broad applications. In the medical field, BC was at first used in wound dressings, tissue regeneration, and artificial blood vessels. This material is suitable for treating various skin diseases due its considerable fluid retention and medication loading properties. BC membranes are used as a temporary dressing for skin treatments due to their excellent fit to the body, reduction in pain, and acceleration of epithelial regeneration. BC-based composites and blends have been evaluated and synthesized both in vitro and in vivo to create an ideal microenvironment for wound healing. This review describes different methods of producing and handling BC for use in the medical field and highlights the qualities of BC in detail with emphasis on biomedical reports that demonstrate its utility. Moreover, it gives an account of biomedical applications, especially for tissue engineering and wound dressing materials reported until date. This review also includes patents of BC applied as a wound dressing material.

A structural study of the self-association of different starches in presence of bacterial cellulose fibrils

A multi-analytical study was performed to analyse the effect of bacterial cellulose (BCF) on the self-association of starches with different amylose content (wheat, waxy-maize), assessing macrostructural properties (rheology, gel strength) and some nano and sub-nano level features (small and wide-angle X-ray scattering). Although pasting viscosities and G' were significantly increased by BCF in both starches, cellulose did not seem to promote the self-association of amylose in short-range retrogradation. A less elastic structure was reflected by a 2-3-fold increase in loss factor (G″/G') at the highest BCF concentration tested. This behavior agreed with the nano and sub-nano characterisation of the samples, which showed loss of starch lamellarity and incomplete full recovery of an ordered structure after storage at 4 °C for 24 h. The gel strength data could be explained by the contribution of BCF to the mechanical response of the sample. The information gained in this work is relevant for tuning the structure of tailored starch-cellulose composites.

The cross-linked bacterial cellulose impregnated with octenidine dihydrochloride-based antiseptic as an antibacterial dressing material for highly-exuding, infected wounds

The highly absorbent, antibacterial dressings with a sustained release of the antimicrobial are considered necessary measures to counteract chronic wound biofilm-based infections. This study aimed to analyze wet and dry bacterial cellulose (BC) materials, modified by chemical cross-linking, and impregnated with an antiseptic based on octenidine dihydrochloride (OCT) in the context of its antibiofilm/antibacterial activity, exudate absorption, and cytotoxicity. The native BC was obtained from cost-effective, ecological-friendly potato juice (leftover from the starch industry). The ability to absorb and retain OCT, exudate absorption capacity, the kinetics of OCT release as well as antibiofilm/antibacterial activity of modified BC materials against biofilm-forming and planktonic bacteria (Staphylococcus aureus and Pseudomonas aeruginosa) were investigated. The performed analyses revealed that modified BC materials, thanks to their layered structure with numerous air spaces, were characterized by sustained exudate absorption and OCT release profile, which allowed them to exhibit high antimicrobial activity for up to 7 days, with a reduction of planktonic and biofilm cells of 84-100% and 69-93%, respectively. The modified BC materials showed also no cytotoxicity against fibroblast cell line L929 in vitro and were characterized by firm adhesion to the curved surfaces. These results indicate that cross-linked BC impregnated with OCT may be a particularly promising dressing material (obtained using sustainable processes), especially in the treatment of biofilm-infected, highly-exuding wounds.

Preparation of an Active Dressing by In Situ Biosynthesis of a Bacterial Cellulose–Graphene Oxide Composite

This paper presents a simple method of obtaining a bacterial cellulose (BC) composite with the addition of graphene oxide (GO) using an in situ method and studies the influence of GO nanoparticles on the structure and properties of the obtained membranes. Microorganisms obtained from Golden Delicious apple vinegar were used to obtain the BC. During the biosynthesis, GO was introduced in the amounts of 3.7, 5.4 and 7.1% w/w. The resulting BC/GO composite was characterized by high water content (~400%), a thickness of about 1.1 mm (in wet form) and a cellulose nanofiber diameter of ~100 nm. The possibility of using the resulting composite membranes as potential active dressings with the sustained-release analgesic medicine—paracetamol—was investigated. The BC/GO composite membranes were characterized by a medicine sorption of 60 mg/g of BC, a slow desorption time, a constant medicine concentration over time and an 80% paracetamol release rate after 24 h. The morphology of membrane surfaces and cross-sections were examined by means of scanning electron microscopy (SEM). Infrared spectroscopy (FTIR), X-ray structure studies (WAXS) as well as thermal analysis (TGA) demonstrated the presence of GO in the BC matrix and interactions between the matrix and the additive.

Cellulose-Based Nanomaterials Advance Biomedicine: A Review

There are various biomaterials, but none fulfills all requirements. Cellulose biopolymers have advanced biomedicine to satisfy high market demand and circumvent many ecological concerns. This review aims to present an overview of cellulose knowledge and technical biomedical applications such as antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration. It includes an extensive bibliography of recent research findings from fundamental and applied investigations. Cellulose-based materials are tailorable to obtain suitable chemical, mechanical, and physical properties required for biomedical applications. The chemical structure of cellulose allows modifications and simple conjugation with several materials, including nanoparticles, without tedious efforts. They render the applications cheap, biocompatible, biodegradable, and easy to shape and process.

Stoichiometric Analysis and Production of Bacterial Cellulose by Gluconacetobacter liquefaciens using Borassus flabellifer L. Jaggery

The objective of the work is to examine the potential utilization of Palmyra palm jaggery (PPJ) for the enhancement of bacterial cellulose (BC) production by Gluconacetobacter liquefaciens. To evaluate the culturing condition, the production of BC fermentation was carried out in batch mode using different carbon sources namely glucose, sucrose and PPJ. PPJ in the HS medium (PHS medium) resulted maximum concentration of BC (14.35 ± 0.18 g/L) under shaking condition than other carbon sources in HS medium. The influence of different medium variables including initial pH and nitrogen sources on BC production was investigated using PHS medium under shaking condition. The maximum BC concentration of 17.79 ± 2.4 g/L was obtained in shaking condition at an initial pH of 5.6 using yeast extract as nitrogen source. Stoichiometric equation for the cell growth and BC synthesis was developed using elemental balance approach. The metabolic heat of reaction (40 kcal generated per liter of medium) was evaluated using electron balance approach. Based on the process economic analysis and the yield of BC during the fermentation, PHS medium without nitrogen source could be a promising cost-effective nutrient than HS medium. Thermal stability, crystallinity index and structural characterizations of produced BC using PPJ medium were evaluated using TGA, XRD and FTIR and the obtained results were compared with HS medium containing glucose and sucrose.

Bacterial cellulose as a potential biopolymer in biomedical applications: a state-of-the-art review

Throughout history, natural biomaterials have benefited society. Nevertheless, in recent years, tailoring natural materials for diverse biomedical applications accompanied with sustainability has become the focus. With the progress in the field of materials science, novel approaches for the production, processing, and functionalization of biomaterials to obtain specific architectures have become achievable. This review highlights an immensely adaptable natural biomaterial, bacterial cellulose (BC). BC is an emerging sustainable biopolymer with immense potential in the biomedical field due to its unique physical properties such as flexibility, high porosity, good water holding capacity, and small size; chemical properties such as high crystallinity, foldability, high purity, high polymerization degree, and easy modification; and biological characteristics such as biodegradability, biocompatibility, excellent biological affinity, and non-biotoxicity. The structure of BC consists of glucose monomer units polymerized via cellulose synthase in β-1-4 glucan chains, creating BC nano fibrillar bundles with a uniaxial orientation. BC-based composites have been extensively investigated for diverse biomedical applications due to their similarity to the extracellular matrix structure. The recent progress in nanotechnology allows the further modification of BC, producing novel BC-based biomaterials for various applications. In this review, we strengthen the existing knowledge on the production of BC and BC composites and their unique properties, and highlight the most recent advances, focusing mainly on the delivery of active pharmaceutical compounds, tissue engineering, and wound healing. Further, we endeavor to present the challenges and prospects for BC-associated composites for their application in the biomedical field.

Fabrication strategies and biomedical applications of three-dimensional bacterial cellulose-based scaffolds: A review

Bacterial cellulose (BC), an extracellular polysaccharide, is a versatile biopolymer due to its intrinsic physicochemical properties, broad-spectrum applications, and remarkable achievements in different fields, especially in the biomedical field. Presently, the focus of BC-related research is on the development of scaffolds containing other materials for in-vitro and in-vivo biomedical applications. To this end, prime research objectives concern the biocompatibility of BC and the development of three-dimensional (3D) BC-based scaffolds. This review summarizes the techniques used to develop 3D BC scaffolds and discusses their potential merits and limitations. In addition, we discuss the various biomedical applications of BC-based scaffolds for which the 3D BC matrix confers desired structural and conformational features. Overall, this review provides comprehensive coverage of the idea, requirements, synthetic strategies, and current and prospective applications of 3D BC scaffolds, and thus, should be useful for researchers working with polysaccharides, biopolymers, or composite materials.

Antimicrobial Properties of Bacterial Cellulose Films Enriched with Bioactive Herbal Extracts Obtained by Microwave-Assisted Extraction

The use of bacterial cellulose (BC) as scaffold for active biofilms is one of the most interesting applications, especially for the biomedical and food industries. However, there are currently few studies evaluating the potential of incorporating herbal extracts into various biomaterials, including BC. Thus, the aim of this study is to report a screening of the total phenolic content and antioxidant and antimicrobial activity of ethanolic extracts of oregano, rosemary, parsley, and lovage. At the same time, the bioactive potential of BC enriched with the four ethanolic extracts is described. Microwave-assisted extraction was used to extract bioactive compounds from the four selected herbs. The physical, mechanical, structural, and chemical properties of BC were also assessed. Next, BC was enriched with the extracts, and their effect against Escherichia coli, Staphylococcus aureus, and Candida albicans was evaluated. The results showed that the bioactivity of the herbs varied significantly, with rosemary extract being the most bioactive. The BC films possessed good mechanical properties, and a three-dimensional network fibrillar structure appropriate for ethanolic-extract incorporation. The BC samples enriched with rosemary extracts had the highest antibacterial activity against S. aureus, while E. coli. and C. albicans seemed to be resistant to all extracts, regardless of herbs.

Bacterial Cellulose-A Remarkable Polymer as a Source for Biomaterials Tailoring

Nowadays, the development of new eco-friendly and biocompatible materials using ‘green’ technologies represents a significant challenge for the biomedical and pharmaceutical fields to reduce the destructive actions of scientific research on the human body and the environment. Thus, bacterial cellulose (BC) has a central place among these novel tailored biomaterials. BC is a non-pathogenic bacteria-produced polysaccharide with a 3D nanofibrous structure, chemically identical to plant cellulose, but exhibiting greater purity and crystallinity. Bacterial cellulose possesses excellent physicochemical and mechanical properties, adequate capacity to absorb a large quantity of water, non-toxicity, chemical inertness, biocompatibility, biodegradability, proper capacity to form films and to stabilize emulsions, high porosity, and a large surface area. Due to its suitable characteristics, this ecological material can combine with multiple polymers and diverse bioactive agents to develop new materials and composites. Bacterial cellulose alone, and with its mixtures, exhibits numerous applications, including in the food and electronic industries and in the biotechnological and biomedical areas (such as in wound dressing, tissue engineering, dental implants, drug delivery systems, and cell culture). This review presents an overview of the main properties and uses of bacterial cellulose and the latest promising future applications, such as in biological diagnosis, biosensors, personalized regenerative medicine, and nerve and ocular tissue engineering.

The Trend of Bacterial Nanocellulose Research Published in the Science Citation Index Expanded From 2005 to 2020: A Bibliometric Analysis

To gain insight into the trend of bacterial nanocellulose research, a bibliometric analysis was performed using the Science Citation Index Expanded database from 2005 to 2020. The study concentrated on the publication's performance in terms of annual outputs and citations, mainstream journals, categories of the Web of Sciences, leading countries, prominent institutions, and trends in research. Current research priorities and future trends were analyzed after summarizing the most commonly used keywords extracted from words in the paper title analysis, authors' keyword analysis, and KeyWords Plus. The findings revealed that the annual output in the form of scholarly articles on bacterial nanocellulose research steadily increased during the first quartile of the study period, followed by a very rapid increase in the last five-years of the study. Increasing mechanical strength would remain the main future focus of bacterial nanocellulose research to create its scope in different field of applications.

An Overview Regarding Microbial Aspects of Production and Applications of Bacterial Cellulose

Cellulose is the most widely used biopolymer, accounting for about 1.5 trillion tons of annual production on Earth. Bacterial cellulose (BC) is a form produced by different species of bacteria, representing a purified form of cellulose. The structure of bacterial cellulose consists of glucose monomers that give it excellent properties for different medical applications (unique nanostructure, high water holding capacity, high degree of polymerization, high mechanical strength, and high crystallinity). These properties differ depending on the cellulose-producing bacteria. The most discussed topic is related to the use of bacterial cellulose as a versatile biopolymer for wound dressing applications. The aim of this review is to present the microbial aspects of BC production and potential applications in development of value-added products, especially for biomedical applications.

Surface Modification of Bacterial Cellulose for Biomedical Applications

Bacterial cellulose is a naturally occurring polysaccharide with numerous biomedical applications that range from drug delivery platforms to tissue engineering strategies. BC possesses remarkable biocompatibility, microstructure, and mechanical properties that resemble native human tissues, making it suitable for the replacement of damaged or injured tissues. In this review, we will discuss the structure and mechanical properties of the BC and summarize the techniques used to characterize these properties. We will also discuss the functionalization of BC to yield nanocomposites and the surface modification of BC by plasma and irradiation-based methods to fabricate materials with improved functionalities such as bactericidal capabilities.

Modified montmorillonite-bacterial cellulose composites as a novel dressing system for pressure injury

The main objective of this study was to investigate the effects of bacterial cellulose hydrogel (BCH) incorporated into montmorillonite (MMT) and its underlying mechanisms of action on a skin wound healing mouse model following pressure injury model. Komagataeibacter hansenii was used to obtain 5 cm in diameter and 0.8 mm of thickness circular bacterial cellulose (BC) sheets, which were incorporated with MMT by deposition ex-site using a 0.1% MMT suspension (100 rpm for 24 h at 28 °C). Afterward, Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) were used to characterize the bacterial cellulose hydrogel incorporated into montmorillonite (BCH-MMT). The pressure injury model was assessed by macroscopic and histological analysis in male Swiss mice. Both, BC and BCH-MMT, showed a typical FTIR spectrum of cellulosic substrates with pronounces bands around 3344, 2920, 1637, and 1041 cm-1 while microparticles of MMT dispersed uniformly throughout BC were revealed by SEM photographs. Animals treated with BCH-MMT showed significant healing of pressure ulcers as demonstrated by reduced area of redness and spontaneous hyperalgesia, lower amounts of in-site inflammatory cells (to the same level as the positive control Dersani®) and ultimately, complete epidermis re-epithelialization and tissue regeneration. Altogether, these findings suggest that a modified BCH-MMT film could serve as scaffolding for skin tissue engineering and potentially as a novel dressing material for pressure injury.

Screening and identification of cellulose-degrading bacteria from soil and leaves at Kerman province, Iran

Cellulosic biomass is considered one of the most promising sources for the production of alternative renewable bioenergy and other valuable products. Identification and optimization of strains with high enzymatic activity that can overcome constraints imposed by the cellulosic structure is an essential step in the development of new biotechnologies. The aim of this study was to isolate and identify thermophilic (50 °C) and mesophilic (37 °C) cellulolytic bacteria from soil and leaves samples at Kerman, Iran. Degrader bacteria were isolated using serial dilution and pour plate method. Media contained carboxymethylcellulose (CMC), and filter paper was used as sources of carbon. Totally 22 mesophilic and 17 thermophilic bacterial strains which produced clear zones were further identified by morphological and biochemical tests. Screening of purified bacteria was performed to identify cellulase-producing bacteria by Congo red test. These bacteria were compared to each other based on cellulase activity, the percentage of growth, and extracellular protein amounts. The strains with the highest enzymatic activity were determined by the DNS method. The isolated US5 and US7 grew rapidly, and produced cellulase. The US5 created the largest clear zones (7 mm). Besides, these strains were selected for analysis of 16S rRNA sequence. The results showed that selected bacteria strains belong to Brevibacillus borstelensis. The B. borstelensis strains isolated in this study showed a suitable cellulase enzyme activity.

Ficus carica extract impregnated amphiphilic polymer scaffold for diabetic wound tissue regenerations

Diabetes associated injury healing and other tissue irregularities are viewed as a significant concern. The purpose of the study is to design the wound regeneration activity of Ficus carica extract (FFE) loaded amphiphilic polymeric scaffold of poly(xylitol-g-adipate-co-glutamide) (PXAG)-polyhydroxybutyrate (PHB) for potential diabetic affected wound regeneration. The PXAG copolymer was prepared by the condensation method, and the polymeric scaffolds of PXAG-PHB, PXAG-PHB/FFE were developed through the ultra-sonication process and magnetic stirrer processes. The chemical structure, crystalline nature, thermal stability, size, surface charge and surface morphology of PXAG-PHB and PXAG-PHB/FFE polymeric scaffolds were investigated. The PXAG-PHB/FFE exhibits 99.0% free radical scavenging activity which was determined by the DPPH method. The inhibition zones by the PXAG-PHB/FFE indicate it had a higher antibacterial activity with the Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) pathogens. The PXAG, PXAG-PHB and PXAG-PHB/FFE polymeric scaffolds exhibited good viability against diabetic induced wound cells (WS1) in 100 μg/mL concentrations up to 72 h incubation. Since the synthesized PXAG-PHB/FFE polymeric scaffolds possess excellent thermal stability, bioactivity, biocompatibility and antioxidant activity along with potent antimicrobial activity, they play a potential role in diabetic wound tissue regenerations.

Bacterial cellulose and its potential for biomedical applications

Bacterial cellulose (BC) is an important polysaccharide synthesized by some bacterial species under specific culture conditions, which presents several remarkable features such as microporosity, high water holding capacity, good mechanical properties and good biocompatibility, making it a potential biomaterial for medical applications. Since its discovery, BC has been used for wound dressing, drug delivery, artificial blood vessels, bone tissue engineering, and so forth. Additionally, BC can be simply manipulated to form its derivatives or composites with enhanced physicochemical and functional properties. Several polymers, carbon-based nanomaterials, and metal nanoparticles (NPs) have been introduced into BC by ex situ and in situ methods to design hybrid materials with enhanced functional properties. This review provides comprehensive knowledge and highlights recent advances in BC production strategies, its structural features, various in situ and ex situ modification techniques, and its potential for biomedical applications.

VEGETABLE CELLULOSE NANOFIBER DRESSING AIDS IN THE HEALING PROCESS OF THIRD-DEGREE BURNS? STUDY ON RATS

BACKGROUND

The treatment of 3rd degree burns represents a major medical challenge. Pinus vegetable cellulose is a biomaterial with characteristic similar to bacterial cellulose.

AIM

To evaluate the safety of cellulose membrane (Pinus sp) in the treatment of 3rd burns in rats and to compare its effectiveness with the bacterial membrane already on the market.

METHOD

Thirty-three Wistar rats were beaten with a 3rd degree burn on back skin by applying water at 98º C for 30 s. Then, they were divided into three groups (n=11): group 1 - simple dressing with gauze; group 2 - dressing with bacterial cellulose membrane; and group 3 - dressing with vegetable cellulose membrane. The animals were maintained for 15 days to check the general clinical status, macroscopic aspect, contraction of the wounds and microscopic analysis for the degree of healing and collagenization.

RESULTS

They were clinically well during the experiment. During the removal of the dressing, there was bleeding in the wound of the control group, unlike the groups treated with cellulose membranes, which protected the bed from injury. The macroscopic evaluation showed a greater contraction of the wounds treated with the membranes in relation to the control. A microscopic analysis revealed that most of the wounds were in advanced healing degree with predominance of mature collagen in all groups.

CONCLUSION

Pinus sp cellulose membrane showed efficacy similar to that of the bacterial membrane in the treatment of 3rd degree burns.

Weaving of bacterial cellulose by the Bcs secretion systems

Cellulose is the most abundant biological compound on Earth and while it is the predominant building constituent of plants, it is also a key extracellular matrix component in many diverse bacterial species. While bacterial cellulose was first described in the 19th century, it was not until this last decade that a string of structural works provided insights into how the cellulose synthase BcsA, assisted by its inner-membrane partner BcsB, senses c-di-GMP to simultaneously polymerize its substrate and extrude the nascent polysaccharide across the inner bacterial membrane. It is now established that bacterial cellulose can be produced by several distinct types of cellulose secretion systems and that in addition to BcsAB, they can feature multiple accessory subunits, often indispensable for polysaccharide production. Importantly, the last years mark significant progress in our understanding not only of cellulose polymerization per se but also of the bigger picture of bacterial signaling, secretion system assembly, biofilm formation and host tissue colonization, as well as of structural and functional parallels of this dominant biosynthetic process between the bacterial and eukaryotic domains of life. Here, we review current mechanistic knowledge on bacterial cellulose secretion with focus on the structure, assembly and cooperativity of Bcs secretion system components.

Biocompatibility evaluation of a 3D-bioprinted alginate-GelMA-bacteria nanocellulose (BNC) scaffold laden with oriented-growth RSC96 cells

Peripheral nerve injury can cause various degrees of damage to the morphological structure and physiological function of the peripheral nerve. At present, compared with "gold standard" autologous nerve transplantation, tissue engineering has certain potential for regeneration and growth; however, achieving oriented guidance is still a challenge. In this study, we used 3D bioprinting to construct a nerve scaffold of RSC96 cells wrapped in sodium alginate/gelatin methacrylate (GelMA)/bacterial nanocellulose (BNC) hydrogel. The 5% sodium alginate+5% GelMA+0.3% BNC group had the thinnest lines among all groups after printing, indicating that the inherent shape of the scaffold could be maintained after adding BNC. Physical and chemical property testing (Fourier transform infrared, rheometer, conductivity, and compression modulus) showed that the 5% alginate+5% GelMA+0.3% BNC group had better mechanical and rheological properties. Live/dead cell staining showed that no mass cell death was observed on days 1, 3, 5, and 7 after printing. In the 5% alginate+5% GelMA group, the cells grew and formed linear connections in the scaffold. This phenomenon was more obvious in the 5% alginate+5% GelMA+0.3% BNC group. In the 5% alginate+5% GelMA+0.3% BNC group, S-100β immunofluorescence staining and cytoskeleton staining showed oriented growth. Polymerase chain reaction (PCR) array results showed that mRNA levels of related neurofactors ASCL1, POU3F3, NEUROG1, DLL1, NOTCH1 and ERBB2 in the 5%GelMA+0.3%BNC group were higher than those of other groups. Four weeks after implantation in nude mice, RSC96 cells grew and proliferated well, blood vessels grew, and S-100β immunofluorescence was positive. These results indicate that a 3D-bioprinted sodium alginate/GelMA/BNC composite scaffold can improve cell-oriented growth, adhesion and the expression of related factors. This 3D-bioprinted composite scaffold has good biocompatibility and is expected to become a new type of scaffold material in the field of neural tissue engineering.

Applications of Bacterial Cellulose as a Natural Polymer in Tissue Engineering

Choosing the material with the best regeneration potential and properties closest to that of the extracellular matrix is one of the main challenges in tissue engineering and regenerative medicine. Natural polymers, such as collagen, elastin, and cellulose, are widely used for this purpose in tissue engineering. Cellulose derived from bacteria has excellent mechanical properties, high hydrophilicity, crystallinity, and a high degree of polymerization and, therefore, can be used as scaffold/membrane for tissue engineering. In the current study, we reviewed the latest trends in the application of bacterial cellulose (BC) polymers as a scaffold in different types of tissue, including bone, vascular, skin, and cartilage. Also, we mentioned the biological and mechanical advantages and disadvantages of BC polymers. Given the data presented in this study, BC polymer could be suggested as a favorable natural polymer in the design of tissue scaffolds. Implementing novel composites that combine this polymer with other materials through modern or rapid prototyping methods can open up a great prospect in the future of tissue engineering and regenerative medicine.

Macro and Micro Routes to High Performance Bioplastics: Bioplastic Biodegradability and Mechanical and Barrier Properties

On a score sheet for plastics, bioplastics have a medium score for combined mechanical performance and a high score for biodegradability with respect to counterpart petroleum-based plastics. Analysis quickly confirms that endeavours to increase the mechanical performance score for bioplastics would be far more achievable than delivering adequate biodegradability for the recalcitrant plastics, while preserving their impressive mechanical performances. Key architectural features of both bioplastics and petroleum-based plastics, namely, molecular weight (Mw) and crystallinity, which underpin mechanical performance, typically have an inversely dependent relationship with biodegradability. In the case of bioplastics, both macro and micro strategies with dual positive correlation on mechanical and biodegradability performance, are available to address this dilemma. Regarding the macro approach, processing using selected fillers, plasticisers and compatibilisers have been shown to enhance both targeted mechanical properties and biodegradability within bioplastics. Whereas, regarding the micro approach, a whole host of bio and chemical synthetic routes are uniquely available, to produce improved bioplastics. In this review, the main characteristics of bioplastics in terms of mechanical and barrier performances, as well as biodegradability, have been assessed-identifying both macro and micro routes promoting favourable bioplastics' production, processability and performance.

Bacterial Cellulose Membrane Containing Epilobium angustifolium L. Extract as a Promising Material for the Topical Delivery of Antioxidants to the Skin

Bacterial cellulose membranes (BCs) are becoming useful as a drug delivery system to the skin. However, there are very few reports on their application of plant substances to the skin. Komagataeibacter xylinus was used for the production of bacterial cellulose (BC). The BC containing 5% and 10% ethanolic extract of Epilobium angustifolium (FEE) (BC-5%FEE and BC-10%FEE, respectively) were prepared. Their mechanical, structural, and antioxidant properties, as well as phenolic acid content, were evaluated. The bioavailability of BC-FESs using mouse L929 fibroblasts as model cells was tested. Moreover, In Vitro penetration through the pigskin of the selected phenolic acids contained in FEE and their accumulation in the skin after topical application of BC-FEEs was examined. The BC-FEEs were characterized by antioxidant activity. The BC-5% FEE showed relatively low toxicity to healthy mouse fibroblasts. Gallic acid (GA), chlorogenic acid (ChA), 3,4-dihydroxybenzoic acid (3,4-DHB), 4-hydroxybenzoic acid (4-HB), 3-hydroxybenzoic acid (3-HB), and caffeic acid (CA) found in FEE were also identified in the membranes. After topical application of the membranes to the pigskin penetration of some phenolic acid and other antioxidants through the skin as well as their accumulation in the skin was observed. The bacterial cellulose membrane loaded by plant extract may be an interesting solution for topical antioxidant delivery to the skin.

Antimicrobial-coated films as food packaging: A review

Antimicrobial food packaging involves packaging the foods with antimicrobials to protect them from harmful microorganisms. In general, antimicrobials can be integrated with packaging materials via direct incorporation of antimicrobial agents into polymers or application of antimicrobial coating onto polymer surfaces. The former option is generally achieved through thermal film-making technology such as compression molding or film extrusion, which is primarily suitable for heat-stable antimicrobials. As a nonthermal technology, surface coating is more promising compared to molding or extrusion for manufacturing food packaging containing heat-sensitive antimicrobials. In addition, it also has advantages over direct incorporation to preserve the packaging materials' bulk properties (e.g., mechanical and physical properties) and minimize the amount of antimicrobials to reach sufficient efficacy. Herein, antimicrobial food packaging films achieved through surface coating is explored and discussed. The two components (i.e., film substrate and antimicrobials) consisting of the antimicrobial-coated films are reviewed as plastic/biopolymer films; and synthetic/naturally occurring antimicrobials. Furthermore, special emphasis is given to different coating technologies to deposit antimicrobials onto film substrate. Laboratory coating techniques (e.g., knife coating, bar coating, and spray coating) commonly applied in academic research are introduced briefly, and scalable coating methods (i.e., electrospinning/spraying, gravure roll coating, flexography coating) that have the potential to bring laboratory-developed antimicrobial-coated films to an industrial level are explained in detail. The migration profile, advantages/drawbacks of antimicrobial-coated films for food applications, and quantitative analyses of the reviewed antimicrobial-coated films from different aspects are also covered in this review. A conclusion is made with a discussion of the challenges that remain in bringing the production of antimicrobial-coated films to an industrial level.