Multienzymatic synthesis of nucleic acid derivatives: a general perspective

Chemo-Enzymatic Generation of Highly Fluorescent Nucleoside Analogs Using Purine-Nucleoside Phosphorylase

Chemo-enzymatic syntheses of strongly fluorescent nucleoside analogs, potentially applicable in analytical biochemistry and cell biology are reviewed. The syntheses and properties of fluorescent ribofuranosides of several purine, 8-azapurine, and etheno-purine derivatives, obtained using various types of purine nucleoside phosphorylase (PNP) as catalysts, as well as α-ribose-1-phosphate (r1P) as a second substrate, are described. In several instances, the ribosylation sites are different to the canonical purine N9. Some of the obtained ribosides show fluorescence yields close to 100%. Possible applications of the new analogs include assays of PNP, nucleoside hydrolases, and other enzyme activities both in vitro and within living cells using fluorescence microscopy.

Improved Synthesis of Deoxyadenosine Triphosphate by Saccharomyces cerevisiae Using an Efficient ATP Regeneration System: Optimization of Response Surface Analysis

Deoxyadenosine triphosphate (dATP) is an important biochemical molecule. In this paper, the synthesis of dATP from deoxyadenosine monophosphate (dAMP), catalyzed by Saccharomyces cerevisiae, was studied. By adding chemical effectors, an efficient ATP regeneration and coupling system was constructed to achieve efficient synthesis of dATP. Factorial and response surface designs were used to optimize process conditions. Optimal reaction conditions were as follows: dAMP 1.40 g/L, glucose 40.97 g/L, MgCl₂·6H₂O 4.00 g/L, KCl 2.00 g/L, NaH₂PO₄ 31.20 g/L, yeast 300.00 g/L, ammonium chloride 0.67 g/L, acetaldehyde 11.64 mL/L, pH 7.0, temperature 29.6 °C. Under these conditions, the substrate conversion was 93.80% and the concentration of dATP in the reaction system was 2.10 g/L, which was 63.10% higher than before optimization, and the concentration of product was 4 times higher than before optimization. The effects of glucose, acetaldehyde, and temperature on the accumulation of dATP were analyzed.

Multiple strategies for the development of multienzyme complex for one-pot reactions

The main intention in the modern era is to make life and activities on earth more comfortable by adding necessary products through biological machinery. Millions of tons of biological raw materials and lignocellulosic biomass are wasted by burning each year without providing benefits to living organisms. Instead of being the cause of disturbing the natural environment by increasing global warming and pollutants worldwide, now, it is the need of the hour to develop an advanced strategy to utilize these biological raw materials to produce renewable energy resources to meet the energy crisis. The review presents the idea of multiple enzymes in one step to hydrolyze complex biomaterials into useful products. The paper discusses how multiple enzymes are arranged in a cascade for complete hydrolysis of raw material in one-pot to prevent multistep, time consuming, and expensive methods. Furthermore, there was the immobilization of multiple enzymes in a cascade system with in vitro and in vivo conditions for reusability of enzymes. The role of genetic engineering, metabolic engineering, and random mutation techniques is described for the development of multiple enzyme cascades. Techniques that are involved in the improvement of native strain to recombinant strain for the enhancement of hydrolytic capacity were used. The preparative steps, before enzymatic hydrolysis like acid, and base treatment methods are more effective for improving the hydrolysis of biomass by multiple enzymes in a one-pot system. Finally, the applications of one-pot multienzyme complexes in biofuel production from lignocellulosic biomass, biosensor production, medicine, food industry, and the conversion of biopolymers into useful products are described.

Rational Design to Enhance Enzyme Activity for the Establishment of an Enzyme-Inorganic Hybrid Nanoflower Co-Immobilization System for Efficient Nucleotide Production

Increasing yields while reducing costs is one of the ultimate pursuits of industrial production. To achieve this goal in the enzymatic production of multiple nucleotides, in this study, a co-immobilized polyphosphate kinase-nucleoside kinase hybridized nanoflower system (PPK@NK) was constructed. To improve the productivity, the nucleoside kinase (NK) used was rationally designed, and a variant with significantly increased activity compared to the wild type was obtained. The polyphosphate kinase (PPK) and NK could be sequentially adsorbed on the surface of hybrid nanoflowers at room temperature (25 °C) through the interaction of Cu²⁺ and proteins without any other chemical pretreatment. The optimal preparation conditions and reaction parameters of PPK@NK hybrid nanoflowers were investigated. Under optimal reaction conditions, the newly prepared co-immobilization system could catalyze the conversion of 100 mM uridine, cytidine, and inosine to the corresponding nucleotides completely within 4 h and could be reused at least six times. The storage stability of the co-immobilized system was more than 2-fold higher than that of the free enzyme, and there was no significant difference in thermostability. PPK@NK hybridized nanoflowers have properties such as easy preparation and storage and low cost, indicating their suitability for the efficient production of nucleotides.

Engineered Ribosyl-1-Kinase Enables Concise Synthesis of Molnupiravir, an Antiviral for COVID-19

Molnupiravir (MK-4482) is an investigational antiviral agent that is under development for the treatment of COVID-19. Given the potential high demand and urgency for this compound, it was critical to develop a short and sustainable synthesis from simple raw materials that would minimize the time needed to manufacture and supply molnupiravir. The route reported here is enabled through the invention of a novel biocatalytic cascade featuring an engineered ribosyl-1-kinase and uridine phosphorylase. These engineered enzymes were deployed with a pyruvate-oxidase-enabled phosphate recycling strategy. Compared to the initial route, this synthesis of molnupiravir is 70% shorter and approximately 7-fold higher yielding. Looking forward, the biocatalytic approach to molnupiravir outlined here is anticipated to have broad applications for streamlining the synthesis of nucleosides in general.

A Multi-enzyme Cascade for the Biosynthesis of AICA Ribonucleoside Di- and Triphosphate

AICA (5′‐aminoimidazole‐4‐carboxamide) ribonucleotides with different phosphorylation levels are the pharmaceutically active metabolites of AICA nucleoside‐based drugs. The chemical synthesis of AICA ribonucleotides with defined phosphorylation is challenging and expensive. In this study, we describe two enzymatic cascades to synthesize AICA derivatives with defined phosphorylation levels from the corresponding nucleobase and the co‐substrate phosphoribosyl pyrophosphate. The cascades are composed of an adenine phosphoribosyltransferase from Escherichia coli (EcAPT) and different polyphosphate kinases: polyphosphate kinase from Acinetobacter johnsonii (AjPPK), and polyphosphate kinase from Meiothermus ruber (MrPPK). The role of the EcAPT is to bind the nucleobase to the sugar moiety, while the kinases are responsible for further phosphorylation of the nucleotide to produce the desired phosphorylated AICA ribonucleotide. The selected enzymes were characterized, and conditions were established for two enzymatic cascades. The diphosphorylated AICA ribonucleotide derivative ZDP, synthesized from the cascade EcAPT/AjPPK, was produced with a conversion up to 91 %. The EcAPT/MrPPK cascade yielded ZTP with conversion up to 65 % with ZDP as a side product.

Cost-Effective Production of ATP and S-Adenosylmethionine Using Engineered Multidomain Scaffold Proteins

Adenosine triphosphate (ATP) and S-adenosyl-L-methionine (SAM) are important intermediates that are widely present in living organisms. Large-scale preparation and application of ATP or SAM is limited by expensive raw materials. To lower the production costs for ATP/SAM, in this study we used strategies applying engineered multidomain scaffold proteins to synthesize ATP and SAM. An artificial scaffold protein containing CBM3 domain, IM proteins and CL-labeled proteins was assembled to form complex 1 for catalytic reactions to increase ATP production. The ATP synthesis system produced approximately 25 g/L of ATP with approximately 15 g/L of ADP and 5 g/L of AMP using 12.5 g/L of adenosine and 40 g/L of sodium hexametaphosphate reaction at 35 °C and a pH of 8.5 for 6 h. Based on the above ATP synthesis system, two CL-labeled methionine adenosyltransferases (CL9-MAT4 and CL9-MAT5) were applied to construct scaffold protein complex 2 to achieve SAM synthesis. Approximately 25 μg of MAT4 in a reaction system with 0.3 M MgCl2 catalyzed at 20 °C and a pH of 8 catalyzed 0.5 g/L of l-Met to produce approximately 0.9 g/L of SAM. Approximately 25 μg of MAT5 in a reaction system with 0.7 M MgCl2 catalyzed at 35 °C and a pH of 8 catalyzed 0.5 g/L of l-Met to produce approximately 1.2 g/L of SAM. Here, we showed that low-cost substrates can be efficiently converted into high-value additional ATP and SAM via multi-enzyme catalytic reactions by engineered multidomain scaffold proteins.

Taylor-made production of pyrimidine nucleoside-5'-monophosphate analogues by highly stabilized mutant uracil phosphoribosyltransferase from Toxoplasma gondii

Nowadays, enzymatic synthesis of nucleotides is an efficient and sustainable alternative to chemical methodologies. In this regard, after the biochemical characterization of wild-type and mutant uracil phosphoribosyltransferases from Toxoplasma gondii (TgUPRT, TgUPRT_2, and TgUPRT₃), TgUPRT₂ was selected as the optimal candidate (69.5 IU mg^-1, UMP synthesis) for structure-guided immobilization onto Ni²⁺ chelate (M_NiUPRT₂) and onto glutaraldehyde-activated microparticles (M_GlUPRT₂). Among resulting derivatives, M_NiUPRT₂3 (6127 IU g^-1_biocat; 92% retained activity; 3-5 fold enhanced stability at 50-60 °C) and M_GlUPRT₂N (3711 IU g^-1_biocat; 27% retained activity; 8-20 fold enhanced stability at 50-60 °C) displayed the best operability. Moreover, the enzymatic synthesis of different pyrimidine NMPs was performed. Finally, the reusability of both derivatives in 5-FUMP synthesis (M_NiUPRT₂3, 80% retained activity after 7 cycles, 5 min; M_GlUPRT₂N, 70% retained activity after 10 cycles, 20 min) was carried out at short times.

Multi-Enzymatic Cascades in the Synthesis of Modified Nucleosides: Comparison of the Thermophilic and Mesophilic Pathways

A comparative study of the possibilities of using ribokinase → phosphopentomutase → nucleoside phosphorylase cascades in the synthesis of modified nucleosides was carried out. Recombinant phosphopentomutase from Thermus thermophilus HB27 was obtained for the first time: a strain producing a soluble form of the enzyme was created, and a method for its isolation and chromatographic purification was developed. It was shown that cascade syntheses of modified nucleosides can be carried out both by the mesophilic and thermophilic routes from D-pentoses: ribose, 2-deoxyribose, arabinose, xylose, and 2-deoxy-2-fluoroarabinose. The efficiency of 2-chloradenine nucleoside synthesis decreases in the following order: Rib (92), dRib (74), Ara (66), F-Ara (8), and Xyl (2%) in 30 min for mesophilic enzymes. For thermophilic enzymes: Rib (76), dRib (62), Ara (32), F-Ara (<1), and Xyl (2%) in 30 min. Upon incubation of the reaction mixtures for a day, the amounts of 2-chloroadenine riboside (thermophilic cascade), 2-deoxyribosides (both cascades), and arabinoside (mesophilic cascade) decreased roughly by half. The conversion of the base to 2-fluoroarabinosides and xylosides continued to increase in both cases and reached 20-40%. Four nucleosides were quantitatively produced by a cascade of enzymes from D-ribose and D-arabinose. The ribosides of 8-azaguanine (thermophilic cascade) and allopurinol (mesophilic cascade) were synthesized. For the first time, D-arabinosides of 2-chloro-6-methoxypurine and 2-fluoro-6-methoxypurine were synthesized using the mesophilic cascade. Despite the relatively small difference in temperatures when performing the cascade reactions (50 and 80 °C), the rate of product formation in the reactions with Escherichia coli enzymes was significantly higher. E. coli enzymes also provided a higher content of the target products in the reaction mixture. Therefore, they are more appropriate for use in the polyenzymatic synthesis of modified nucleosides.

A Novel One-Pot Enzyme Cascade for the Biosynthesis of Cladribine Triphosphate

Cladribine triphosphate is the active compound of the anti-cancer and multiple sclerosis drug Mavenclad (cladribine). Biosynthesis of such non-natural deoxyribonucleotides is challenging but important in order to study the pharmaceutical modes of action. In this study, we developed a novel one-pot enzyme cascade for the biosynthesis of cladribine triphosphate, starting with the nucleobase 2Cl-adenine and the generic co-substrate phosphoribosyl pyrophosphate. The cascade is comprised of the three enzymes, namely, adenine phosphoribosyltransferase (APT), polyphosphate kinase (PPK), and ribonucleotide reductase (RNR). APT catalyzes the binding of the nucleobase to the ribose moiety, followed by two consecutive phosphorylation reactions by PPK. The formed nucleoside triphosphate is reduced to the final product 2Cl-deoxyadenonsine triphosphate (cladribine triphosphate) by the RNR. The cascade is feasible, showing comparative product concentrations and yields to existing enzyme cascades for nucleotide biosynthesis. While this study is limited to the biosynthesis of cladribine triphosphate, the design of the cascade offers the potential to extend its application to other important deoxyribonucleotides.

Magnetic micro-macro biocatalysts applied to industrial bioprocesses

The use of magnetic biocatalysts is highly beneficial in bioprocesses technology, as it allows their easy recovering and enhances biocatalyst lifetime. Thus, it simplifies operational processing and increases efficiency, leading to more cost-effective processes. The use of small-size matrices as carriers for enzyme immobilization enables to maximize surface area and catalysts loading, also reducing diffusion limitations. As highly expensive nanoparticles (nm size) usually aggregate, their application at large scale is not recommended. In contrast, the use of magnetic micro-macro (µm-mm size) matrices leads to more homogeneous biocatalysts with null or very low aggregation, which facilitates an easy handling and recovery. The present review aims to highlight recent trends in the application of medium-to-high size magnetic biocatalysts in different areas (biodiesel production, food and pharma industries, protein purification or removal of environmental contaminants). The advantages and disadvantages of these above-mentioned magnetic biocatalysts in bioprocess technology will be also discussed.

New trends in the biocatalytic production of nucleosidic active pharmaceutical ingredients using 2'-deoxyribosyltransferases

Nowadays, pharmaceutical industry demands competitive and eco-friendly processes for active pharmaceutical ingredients (APIs) manufacturing. In this context, enzyme and whole-cell mediated processes offer an efficient, sustainable and cost-effective alternative to the traditional multi-step and environmentally-harmful chemical processes. Particularly, 2'-deoxyribosyltransferases (NDTs) have emerged as a novel synthetic alternative, not only to chemical but also to other enzyme-mediated synthetic processes. This review describes recent findings in the development and scaling up of NDTs as industrial biocatalysts, including the most relevant and recent examples of single enzymatic steps, multienzyme cascades, chemo-enzymatic approaches, and engineered biocatalysts. Finally, to reflect the inventive and innovative steps of NDT-mediated bioprocesses, a detailed analysis of recently granted patents, with specific focus on industrial synthesis of nucleoside-based APIs, is hereunder presented.

Biocatalytic routes to anti-viral agents and their synthetic intermediates

An assessment of biocatalytic strategies for the synthesis of anti-viral agents, offering guidelines for the development of sustainable production methods for a future COVID-19 remedy.

Efficient One-Pot Synthesis of Cytidine 5'-Monophosphate Using an Extremophilic Enzyme Cascade System

A rapid in vitro enzymatic biosynthesis system has been developed as a biological manufacturing platform with potential industrial uses. Cytidine 5'-monophosphate (5'-CMP) is a key intermediate in the preparation of several nucleotide derivatives and is widely used in food and pharmaceutical industries. In this study, a highly efficient biosynthesis system was constructed for manufacturing 5'-CMP in vitro. Cytidine kinase (CK) was used for the biotransformation of cytidine to 5'-CMP, while polyphosphate kinase (PPK) was coupled for adenosine triphosphate regeneration. Both CK and PPK were selected from extremophiles, possessing great potential for biocatalytic synthesis. The effects of temperature, substrate concentration, and enzyme ratios were investigated to enhance the titer and yield of 5'-CMP. After optimization, 96 mM 5'-CMP was produced within 6 h, and the yield reached nearly 100%. This work highlights the ease of 5'-CMP production by an in vitro biomanufacturing platform and provides a green and efficient approach for the industrial synthesis of 5'-CMP.

Hypoxanthine-Guanine Phosphoribosyltransferase/adenylate Kinase From Zobellia galactanivorans: A Bifunctional Catalyst for the Synthesis of Nucleoside-5'-Mono-, Di- and Triphosphates

In our search for novel biocatalysts for the synthesis of nucleic acid derivatives, we found a good candidate in a putative dual-domain hypoxanthine-guanine phosphoribosyltransferase (HGPRT)/adenylate kinase (AMPK) from Zobellia galactanivorans (ZgHGPRT/AMPK). In this respect, we report for the first time the recombinant expression, production, and characterization of a bifunctional HGPRT/AMPK. Biochemical characterization of the recombinant protein indicates that the enzyme is a homodimer, with high activity in the pH range 6-7 and in a temperature interval from 30 to 80°C. Thermal denaturation experiments revealed that ZgHGPRT/AMPK exhibits an apparent unfolding temperature (Tm) of 45°C and a retained activity of around 80% when incubated at 40°C for 240 min. This bifunctional enzyme shows a dependence on divalent cations, with a remarkable preference for Mg²⁺ and Co²⁺ as cofactors. More interestingly, substrate specificity studies revealed ZgHGPRT/AMPK as a bifunctional enzyme, which acts as phosphoribosyltransferase or adenylate kinase depending upon the nature of the substrate. Finally, to assess the potential of ZgHGPRT/AMPK as biocatalyst for the synthesis of nucleoside-5′-mono, di- and triphosphates, the kinetic analysis of both activities (phosphoribosyltransferase and adenylate kinase) and the effect of water-miscible solvents on enzyme activity were studied.

Enzymatic Synthesis of Nucleoside Triphosphates and Deoxynucleoside Triphosphates by Surface-Displayed Kinases

Nucleoside triphosphates and deoxynucleoside triphosphates are important biochemical molecules. In this study, recombinant Escherichia coli that could display nucleotide kinases (INP-N-NMKases) and acetate kinase (INP-N-ACKase) on the cell surface were constructed by fusing an enzyme (NMKase/ACKase) to the N-terminus of ice nucleation protein (INP-N). By using intact recombinant bacteria cells as a catalyst coupled with an ACKase-catalyzed adenosine-5'-triphosphate (ATP) regeneration system, nucleoside triphosphates (NTPs) and deoxynucleoside triphosphates (dNTPs) could be synthesized efficiently. In a reaction system with 5 mmol/l substrate, the conversion rates of cytidine-5'-triphosphate (CTP) and deoxycytidine-5'-triphosphate (dCTP) were 96% and 93%, respectively, the conversion rate of ATP and deoxyadenosine-5'-triphosphate (dATP) was 96%, the conversion rate of deoxythymidine-5'-triphosphate (dTTP) was 91%, and the conversion rate of uridine-5'-triphosphate (UTP) was 80%. There was no obvious degradation. At 37 °C, the stability of the surface-displayed fusion protein, especially in the presence of the substrate, was significantly improved. Each whole cell could be reused more than 8 times.

Leloir Glycosyltransferases in Applied Biocatalysis: A Multidisciplinary Approach

Enzymes are nature’s catalyst of choice for the highly selective and efficient coupling of carbohydrates. Enzymatic sugar coupling is a competitive technology for industrial glycosylation reactions, since chemical synthetic routes require extensive use of laborious protection group manipulations and often lack regio- and stereoselectivity. The application of Leloir glycosyltransferases has received considerable attention in recent years and offers excellent control over the reactivity and selectivity of glycosylation reactions with unprotected carbohydrates, paving the way for previously inaccessible synthetic routes. The development of nucleotide recycling cascades has allowed for the efficient production and reuse of nucleotide sugar donors in robust one-pot multi-enzyme glycosylation cascades. In this way, large glycans and glycoconjugates with complex stereochemistry can be constructed. With recent advances, LeLoir glycosyltransferases are close to being applied industrially in multi-enzyme, programmable cascade glycosylations.

Structure-Guided Tuning of a Selectivity Switch towards Ribonucleosides in Trypanosoma brucei Purine Nucleoside 2'-Deoxyribosyltransferase

The use of nucleoside 2'-deoxyribosyltransferases (NDTs) as biocatalysts for the industrial synthesis of nucleoside analogues is often hindered by their strict preference for 2'-deoxyribonucleosides. It is shown herein that a highly versatile purine NDT from Trypanosoma brucei (TbPDT) can also accept ribonucleosides as substrates; this is most likely because of the distinct role played by Asn53 at a position that is usually occupied by Asp in other NDTs. Moreover, this unusual activity was improved about threefold by introducing a single amino acid replacement at position 5, following a structure-guided approach. Biophysical and biochemical characterization revealed that the TbPDT_Y5F variant is a homodimer that displays maximum activity at 50 °C and pH 6.5 and shows a remarkably high melting temperature of 69 °C. Substrate specificity studies demonstrate that 6-oxopurine ribonucleosides are the best donors (inosine>guanosine≫adenosine), whereas no significant preferences exist between 6-aminopurines and 6-oxopurines as base acceptors. In contrast, no transferase activity could be detected on xanthine and 7-deazapurines. TbPDT_Y5F was successfully employed in the synthesis of a wide range of modified ribonucleosides containing different purine analogues.

Sustainable production of nucleoside analogues by a high-efficient purine 2'-deoxyribosyltransferase immobilized onto Ni2+ chelate magnetic microparticles

The present work aims to develop a magnetic biocatalyst for customized production of nucleoside analogues using mutant His-tagged purine 2'-deoxyribosyltransferase from Trypanosoma brucei (TbPDT_V11S) immobilized onto Ni²⁺ chelate magnetic iron oxide porous microparticles (MTbPDT_V11S). Biochemical characterization revealed MTbPDT_V11S5 as optimal candidate for further studies (10,552 IU g^-1; retained activity 54% at 50 °C and pH 6.5). Interestingly, MTbPDT_V11S5 displayed the highest activity value described up to date for an immobilized NDT. Moreover, MTbPDT_V11S5 was successfully employed in the one-pot, one-step production of different therapeutic nucleoside analogues, such as cladribine or 2'-deoxy-2-fluoroadenosine, among others. Finally, MTbPDT_V11S5 proved to be stable when stored at 50 °C for 8 h and pH 6.0 and reusable up to 10 times without negligible loss of activity in the enzymatic production of the antitumor prodrug 2'-deoxy-2-fluoroadenosine.

Sustainable synthesis of uridine-5'-monophosphate analogues by immobilized uracil phosphoribosyltransferase from Thermus thermophilus

Nowadays enzymatic synthesis of nucleic acid derivatives is gaining momentum over traditional chemical synthetic processes. Biotransformations catalyzed by whole cells or enzymes offer an ecofriendly and efficient alternative to the traditional multistep chemical methods, avoiding the use of chemical reagents and organic solvents that are expensive and environmentally harmful. Herein we report for the first time the covalent immobilization a uracil phosphoribosyltransferase (UPRT). In this sense, UPRT from Thermus thermophilus HB8 was immobilized onto glutaraldehyde-activated MagReSyn®Amine magnetic iron oxide porous microparticles (MTtUPRT). According to the catalyst load experiments, MTtUPRT3 was selected as optimal biocatalyst for further studies. MTtUPRT3 was active and stable in a broad range of temperature (70-100 °C) and in the pH interval 6-8, displaying maximum activity at 100 °C and pH 7 (activity 968 IU/g_support, retained activity 100%). In addition, MTtUPRT3 could be reused up to 8 times in the synthesis of uridine-5'-monophosphate (UMP). Finally, MTtUPRT3 was successfully applied in the sustainable synthesis of different 5-modified uridine-5'-monophosphates at short times. Taking into account these results, MTtUPRT3 would emerge as a valuable biocatalyst for the synthesis of nucleoside monophosphates through an efficient and environmentally friendly methodology.

Bio-catalytic synthesis of unnatural nucleosides possessing a large functional group such as a fluorescent molecule by purine nucleoside phosphorylase

Unnatural nucleosides are attracting interest as potential diagnostic tools, medicines, and functional molecules.

Purine and pyrimidine salvage pathway in thermophiles: a valuable source of biocatalysts for the industrial production of nucleic acid derivatives

Due to their similarity to natural counterparts, nucleic acid derivatives (nucleobases, nucleosides, and nucleotides, among others) are interesting molecules for pharmaceutical, biomedical, or food industries. For this reason, there is increasing worldwide demand for the development of efficient synthetic processes for these compounds. Chemical synthetic methodologies require numerous protection-deprotection steps and often lead to the presence of undesirable by-products or enantiomeric mixtures. These methods also require harsh operating conditions, such as the use of organic solvents and hazard reagents. Conversely, enzymatic production by whole cells or enzymes improves regio-, stereo-, and enantioselectivity and provides an eco-friendly alternative. Because of their essential role in purine and pyrimidine scavenging, enzymes from purine and pyrimidine salvage pathways are valuable candidates for the synthesis of many different nucleic acid components. In recent years, many different enzymes from these routes, such as nucleoside phosphorylases, nucleoside kinases, 2'-deoxyribosyltransferases, phosphoribosyl transferases, or deaminases, have been successfully employed as biocatalysts in the production of nucleobase, nucleoside, or nucleotide analogs. Due to their great activity and stability at extremely high temperatures, the use of enzymes from thermophiles in industrial biocatalysis is gaining momentum. Thermophilic enzymes not only display unique characteristics such as temperature, chemical, and pH stability but also provide many different advantages from an industrial perspective. This mini-review aims to cover the most representative enzymatic approaches for the synthesis of nucleic acid derivatives. In this regard, we provide detailed comments about enzymes involved in crucial steps of purine and pyrimidine salvage pathways in thermophiles, as well as their biological role, biochemical characterization, active site mechanism, and substrate specificity. In addition, the most interesting synthetic examples reported in the literature are also included.

New nucleoside hydrolase with transribosylation activity from Agromyces sp. MM-1 and its application for enzymatic synthesis of 2'-O-methylribonucleosides

Microorganisms were screened for transribosylation activity between 2'-O-methyluridine (2'-OMe-UR) and nucleobases, for the purpose of developing a biotransformation process to synthesize 2'-O-methylribonucleosides (2'-OMe-NRs), which are raw materials for nucleic acid drugs. An actinomycete, Agromyces sp. MM-1 was found to produce 2'-O-methyladenosine (2'-OMe-AR) when whole cells were used in a reaction mixture containing 2'-OMe-UR and adenine. The enzyme responsible for the transribosylation was partially purified from Agromyces sp. MM-1 cells through a six-step separation procedure, and identified as a nucleoside hydrolase family enzyme termed AgNH. AgNH was a bi-functional enzyme catalyzing both hydrolysis towards 2'-OMe-NRs and transribosylation between 2'-OMe-UR and various nucleobases as well as adenine. In the hydrolysis reaction, AgNH preferred guanosine analogues as its substrates. In the transribosylation reaction, AgNH showed strong activity towards 6-chloroguanine, with 25-fold relative activity when adenine was used as the acceptor substrate. The transribosylation reaction product from 2'-OMe-UR and 6-chloroguanine was determined to 2'-O-methyl-6-chloroguanosine (2'-OMe-6ClGR). Under the optimal conditions, the maximum molar yield of 2'-OMe-6ClGR reached 2.3% in a 293-h reaction, corresponding to 440 mg/L.

Enzymatic synthesis of ribo- and 2'-deoxyribonucleosides from glycofuranosyl phosphates: An approach to facilitate isotopic labeling

Milligram quantities of α-D-ribofuranosyl 1-phosphate (sodium salt) (αR1P) were prepared by the phosphorolysis of inosine, catalyzed by purine nucleoside phosphorylase (PNPase). The αR1P was isolated by chromatography in >95% purity and characterized by ¹H and ¹³C NMR spectroscopy. Aqueous solutions of αR1P were stable at pH 6.4 and 4 °C for several months. The isolated αR1P was N-glycosylated with different nitrogen bases (adenine, guanine and uracil) using PNPase or uridine phosphorylase (UPase) to give the corresponding ribonucleosides in high yield based on the glycosyl phosphate. This methodology is attractive for the preparation of stable isotopically labeled ribo- and 2'-deoxyribonucleosides because of the ease of product purification and convenient use and recycling of nitrogen bases. The approach eliminates the need for separate reactions to prepare individual furanose-labeled ribonucleosides, since only one ribonucleoside (inosine) needs to be labeled, if desired, in the furanose ring, the latter achieved by a high-yield chemical N-glycosylation. 2'-Deoxyribonucleosides were prepared from 2'-deoxyinosine using the same methodology with minor modifications.

Enzymatic production of dietary nucleotides from low-soluble purine bases by an efficient, thermostable and alkali-tolerant biocatalyst

Traditionally, enzymatic synthesis of nucleoside-5'-monophosphates (5'-NMPs) using low water-soluble purine bases has been described as less efficient due to their low solubility in aqueous media. The use of enzymes from extremophiles, such as thermophiles or alkaliphiles, offers the potential to increase solubilisation of these bases by employing high temperatures or alkaline pH. This study describes the cloning, expression and purification of hypoxanthine-guanine-xanthine phosphoribosyltransferase from Thermus thermophilus (TtHGXPRT). Biochemical characterization indicates TtHGXPRT as a homotetramer with excellent activity and stability across a broad range of temperatures (50-90°C) and ionic strengths (0-500mMNaCl), but it also reveals an unusually high activity and stability under alkaline conditions (pH range 8-11). In order to explore the potential of TtHGXPRT as an industrial biocatalyst, enzymatic production of several dietary 5'-NMPs, such as 5'-GMP and 5'-IMP, was carried out at high concentrations of guanine and hypoxanthine.

Biocatalysis in the Pharmaceutical Industry: The Need for Speed

The use of biocatalysis in the pharmaceutical industry continues to expand as a result of increased access to enzymes and the ability to engineer those enzymes to meet the demands of industrial processes. However, we are still just scratching the surface of potential biocatalytic applications. The time pressures present in pharmaceutical process development are incompatible with the long lead times required for engineering a suitable biocatalyst. Dramatic increases in the speed of protein engineering are needed to deliver on the ever increasing opportunities for industrial biocatalytic processes.

Systematic comparison of co-expression of multiple recombinant thermophilic enzymes in Escherichia coli BL21(DE3)

The precise control of multiple heterologous enzyme expression levels in one Escherichia coli strain is important for cascade biocatalysis, metabolic engineering, synthetic biology, natural product synthesis, and studies of complexed proteins. We systematically investigated the co-expression of up to four thermophilic enzymes (i.e., α-glucan phosphorylase (αGP), phosphoglucomutase (PGM), glucose 6-phosphate dehydrogenase (G6PDH), and 6-phosphogluconate dehydrogenase (6PGDH)) in E. coli BL21(DE3) by adding T7 promoter or T7 terminator of each gene for multiple genes in tandem, changing gene alignment, and comparing one or two plasmid systems. It was found that the addition of T7 terminator after each gene was useful to decrease the influence of the upstream gene. The co-expression of the four enzymes in E. coli BL21(DE3) was demonstrated to generate two NADPH molecules from one glucose unit of maltodextrin, where NADPH was oxidized to convert xylose to xylitol. The best four-gene co-expression system was based on two plasmids (pET and pACYC) which harbored two genes. As a result, apparent enzymatic activities of the four enzymes were regulated to be at similar levels and the overall four-enzyme activity was the highest based on the formation of xylitol. This study provides useful information for the precise control of multi-enzyme-coordinated expression in E. coli BL21(DE3).

Enzymatic synthesis of 2'-O-methylribonucleosides with a nucleoside hydrolase family enzyme from Lactobacillus buchneri LBK78

2'-O-Methylribonucleosides (2'-OMe-NRs) are promising raw materials for the production of nucleic acid drugs. We previously reported that LbNH, a nucleoside hydrolase from Lactobacillus buchneri LBK78 (NITE P-01581), was the first enzyme found to act on 2'-OMe-NRs. In the present study, we determined that LbNH also has the transribosylation activity between 2'-OMe-NRs and nucleobases, in addition to the hydrolyzing activity towards 2'-OMe-NRs. When 2'-O-methyluridine (2'-OMe-UR) and adenine were reacted with LbNH, 2'-O-methyladenosine (2'-OMe-AR) was produced. LbNH preferred purine nucleobases as its acceptor substrates for the transribosylation with 2'-OMe-UR as a donor substrate. Kinetic analysis of LbNH revealed that adenine behaved as a mixed inhibitor of the hydrolysis of 2'-OMe-UR. Under the optimal reaction conditions, the maximum molar yield of enzymatic 2'-OMe-AR produced reached 0.97% towards 2'-OMe-UR, corresponding to 0.16 g/L.

Biological fluorination from the sea: discovery of a SAM-dependent nucleophilic fluorinating enzyme from the marine-derived bacterium Streptomyces xinghaiensis NRRL B24674

The first ever marine originated fluorinating enzyme, which promises to be useful in biotransformation and synthetic biology, is described.

Biomedical Probes Based on Inorganic Nanoparticles for Electrochemical and Optical Spectroscopy Applications

Inorganic nanoparticles usually provide novel and unique physical properties as their size approaches nanometer scale dimensions. The unique physical and optical properties of nanoparticles may lead to applications in a variety of areas, including biomedical detection. Therefore, current research is now increasingly focused on the use of the high surface-to-volume ratios of nanoparticles to fabricate superb chemical- or biosensors for various detection applications. This article highlights various kinds of inorganic nanoparticles, including metal nanoparticles, magnetic nanoparticles, nanocomposites, and semiconductor nanoparticles that can be perceived as useful materials for biomedical probes and points to the outstanding results arising from their use in such probes. The progress in the use of inorganic nanoparticle-based electrochemical, colorimetric and spectrophotometric detection in recent applications, especially bioanalysis, and the main functions of inorganic nanoparticles in detection are reviewed. The article begins with a conceptual discussion of nanoparticles according to types, followed by numerous applications to analytes including biomolecules, disease markers, and pharmaceutical substances. Most of the references cited herein, dating from 2010 to 2015, generally mention one or more of the following characteristics: a low detection limit, good signal amplification and simultaneous detection capabilities.