Recent advances in the biotechnological production of microbial poly(ɛ-l-lysine) and understanding of its biosynthetic mechanism

Transcriptomic analysis of the antibacterial mechanism of ε-polylysine-functionalized magnetic composites against Alicyclobacillus acidoterrestris and its application in apple juice

BACKGROUND

Alicyclobacillus acidoterrestris is a common microorganism in fruit juice. It can produce off-odor metabolites and has been considered to be an important factor in juice contamination. Thus, the development of new strategy for the control of A. acidoterrestris has important practical significance. The primary objective of this work was to assess the antibacterial performance of ε-polylysine-functionalized magnetic composites (Fe3O4@MoS2@PAA-EPL) in apple juice and its effect on juice quality. Moreover, the molecular mechanism of Fe3O4@MoS2@PAA-EPL against A. acidoterrestris was explored by RNA sequencing (RNA-Seq).

RESULTS

Experimental results indicated that the synthesized composites possessed the ability to inhibit the viability of A. acidoterrestris vegetative cells and spores. Besides, investigation on the quality of apple juice incubated with Fe3O4@MoS2@PAA-EPL implied that the fabricated composites displayed negligible adverse effects on juice quality. In addition, the results of RNA-Seq demonstrated that 833 differentially expressed genes (DEGs) were identified in Fe3O4@MoS2@PAA-EPL-treated A. acidoterrestris, which were associated with translation, energy metabolism, amino acid metabolism, membrane transport and cell integrity.

CONCLUSION

These results suggested that the treatment of Fe3O4@MoS2@PAA-EPL disrupted energy metabolism, repressed cell wall synthesis and caused membrane transport disorder of bacterial cells. This work provides novel insights into the molecular antibacterial mechanism for ε-polylysine-functionalized magnetic composites against A. acidoterrestris. © 2024 Society of Chemical Industry.

Design and optimization of ε-poly-l-lysine with specific functions for diverse applications

ε-Poly-l-lysine (ε-PL) is a natural homo-poly(amino acid) which can be produced by microorganisms. With the advantages in broad-spectrum antimicrobial activity, biodegradability, and biocompatibility, ε-PL has been widely used as a preservative in the food industry. Different molecular architectures endow ε-PL and ε-PL-based materials with versatile applications. However, the microbial synthesis of ε-PL is currently limited by low efficiencies in genetic engineering and molecular architecture modification. This review presents recent advances in ε-PL production and molecular architecture modification of microbial ε-PL, with a focus on the current challenges and solutions for the improvement of the productivity and diversity of ε-PL. In addition, we highlight recent examples where ε-PL has been applied to expand the versability of edible films and nanoparticles in various applications. Commercial production and the challenges and future research directions in ε-PL biosynthesis are also discussed. Currently, although the main use of ε-PL is as a food preservative, ε-PL and ε-PL-based polymers have shown excellent application potential in biomedical fields. With the development of synthetic biology, the design and synthesis of ε-PL with a customized molecular architecture are possible in the near future. ε-PL-based polymers with specific functions will be a new trend in biopolymer manufacturing.

Epsilon-poly-l-lysine alleviates brown blotch disease of postharvest Agaricus bisporus mushrooms by directly inhibiting Pseudomonas tolaasii and inducing mushroom disease resistance

The natural antimicrobial peptide, epsilon-poly-l-lysine (ε-PL), is widely acknowledged as a food preservative. However, its potential in managing bacterial brown blotch disease in postharvest edible mushrooms and the associated mechanism remain unexplored. In this study, concentrations of ε-PL ≥ 150 mg L-1 demonstrated significant inhibition effects, restraining over 80% of growth and killed over 99% of Pseudomonas tolaasii (P. tolaasii). This inhibition effect occurred in a concentration-dependent manner. The in vivo findings revealed that treatment with 150 mg L-1 ε-PL effectively inhibited P. tolaasii-caused brown blotch disease in Agaricus bisporus (A. bisporus) mushrooms. Plausible mechanisms underlying ε-PL's action against P. tolaasii in A. bisporus involve: (i) damaging the cell morphology and membrane integrity, and increasing uptake of propidium iodide and leakage of cellular components of P. tolaasii; (ii) interaction with intracellular proteins and DNA of P. tolaasii; (iii) inhibition of P. tolaasii-induced activation of polyphenol oxidase, elevation of antioxidative enzyme activities, stimulation of phenylpropanoid biosynthetic enzyme activities and metabolite production, and augmentation of pathogenesis-related protein contents in A. bisporus mushrooms. These findings suggest promising prospects for the application of ε-PL in controlling bacterial brown blotch disease in A. bisporus.

Constitutive and high gene expression in the diaminopimelate pathway accelerates ε-poly-L-lysine production in Streptomyces albulus

Streptomyces albulus NBRC14147 produces a homopoly(amino acid), ε-poly-L-lysine (ε-PL). Due to its antibiotic activity, thermostability, biodegradability, and non-toxicity to humans, ε-PL is used as a food preservative. In this study, homology searches of diaminopimelate (DAP) pathway genes (dapB and dapE), in an S. albulus genome database, were shown to encode predicted enzymes using dapB or dapE in Escherichia coli strain complementation assays. We observed that dapB and dapE transcriptional levels were weak during ε-PL production stages. Therefore, we strengthened this expression using an ermE constitutive promoter. Engineered strains generated faster growth and ε-PL production rates when compared with the control strain. Moreover, maximum ε-PL yields in S. albulus, where dapB was constitutively expressed, were approximately 14% higher when compared with the control strain. These findings showed that enhanced lysine biosynthetic gene expression generated faster and higher ε-PL production levels.

Advances in the adenylation domain: discovery of diverse non-ribosomal peptides

Non-ribosomal peptide synthetases are mega-enzyme assembly lines that synthesize many clinically useful compounds. As a gatekeeper, they have an adenylation (A)-domain that controls substrate specificity and plays an important role in product structural diversity. This review summarizes the natural distribution, catalytic mechanism, substrate prediction methods, and in vitro biochemical analysis of the A-domain. Taking genome mining of polyamino acid synthetases as an example, we introduce research on mining non-ribosomal peptides based on A-domains. We discuss how non-ribosomal peptide synthetases can be engineered based on the A-domain to obtain novel non-ribosomal peptides. This work provides guidance for screening non-ribosomal peptide-producing strains, offers a method to discover and identify A-domain functions, and will accelerate the engineering and genome mining of non-ribosomal peptide synthetases. KEY POINTS: • Introducing adenylation domain structure, substrate prediction, and biochemical analysis methods • Advances in mining homo polyamino acids based on adenylation domain analysis • Creating new non-ribosomal peptides by engineering adenylation domains.

Understanding the Streptomyces albulus response to low-pH stress at the interface of physiology and transcriptomics

Streptomyces albulus is a well-established cell factory for ε-poly-L-lysine (ε-PL) production. It has been reported that ε-PL biosynthesis is strictly regulated by pH and that ε-PL can accumulate at approximately pH 4.0, which is outside of the general pH range for natural product production by Streptomyces species. However, how S. albulus responds to low pH is not clear. In this study, we attempted to explore the response of S. albulus to low-pH stress at the physiological and global gene transcription levels. At the physiological level, S. albulus maintained intracellular pH homeostasis at ~pH 7.5, increased the unsaturated fatty acid ratio, extended the fatty acid chain length, enhanced ATP accumulation, increased H⁺-ATPase activity, and accumulated the basic amino acids L-lysine and L-arginine. At the global gene transcription level, carbohydrate metabolism, oxidative phosphorylation, macromolecule protection and repair, and the acid tolerance system were found to be involved in combating low-pH stress. Finally, we preliminarily evaluated the effect of the acid tolerance system and cell membrane fatty acid synthesis on low-pH tolerance via gene manipulation. This work provides new insight into the adaptation mechanism of Streptomyces to low-pH stress and a new opportunity for constructing robust S. albulus strains for ε-PL production. KEY POINTS: • S. albulus consistently remained pH _i at ~7.4 regardless of the environmental pH. • S. albulus combats low-pH stress by modulating lipid composition of cell membrane. • Overexpression of cfa in S. albulus could improve low-pH tolerance and ɛ-PL titer.

Engineering Streptomyces albulus to enhance ε-poly-L-lysine production by introducing a polyphosphate kinase-mediated ATP regeneration system

BACKGROUND

ε-Poly-L-lysine (ε-PL) is a natural and safe food preservative that is mainly produced by filamentous and aerobic bacteria Streptomyces albulus. During ε-PL biosynthesis, a large amount of ATP is used for the polymerization of L-lysine. A shortage of intracellular ATP is one of the major factors limiting the increase in ε-PL production. In previous studies, researchers have mainly tried to increase the oxygen supply to enhance intracellular ATP levels to improve ε-PL production, which can be achieved through the use of two-stage dissolved oxygen control, oxygen carriers, heterologous expression of hemoglobin, and supplementation with auxiliary energy substrates. However, the enhancement of the intracellular ATP supply by constructing an ATP regeneration system has not yet been considered.

RESULTS

In this study, a polyphosphate kinase (PPK)-mediated ATP regeneration system was developed and introduced into S. albulus to successfully improve ε-PL production. First, polyP:AMP phosphotransferase (PAP) from Acinetobacter johnsonii was selected for catalyzing the conversion of AMP into ADP through an in vivo test. Moreover, three PPKs from different microbes were compared by in vitro and in vivo studies with respect to catalytic activity and polyphosphate (polyP) preference, and PPK2B^cg from Corynebacterium glutamicum was used for catalyzing the conversion of ADP into ATP. As a result, a recombinant strain PL05 carrying coexpressed pap and ppk2B^cg for catalyzing the conversion of AMP into ATP was constructed. ε-PL production of 2.34 g/L was achieved in shake-flask fermentation, which was an increase of 21.24% compared with S. albulus WG608; intracellular ATP was also increased by 71.56%. In addition, we attempted to develop a dynamic ATP regulation route, but the result was not as expected. Finally, the conditions of polyP₆ addition were optimized in batch and fed-batch fermentations, and the maximum ε-PL production of strain PL05 in a 5-L fermenter was 59.25 g/L by fed-batch fermentation, which is the highest ε-PL production reported in genetically engineered strains.

CONCLUSIONS

In this study, we proposed and developed a PPK-mediated ATP regeneration system in S. albulus for the first time and significantly enhanced ε-PL production. The study provides an efficient approach to improve the production of not only ε-PL but also other ATP-driven metabolites.

Co-production of levan with other high-value bioproducts: A review

Levan is a homopolysaccharide of fructose that has both scientific and industrial importance, with various applications in health, pharmaceutical, cosmetic and food industries. Despite its broad spectrum of uses, there are only a limited number of commercial levan sources due to the high costs related to its production. To make production economically viable, efforts have been concentrated on the selection of levan-producing microorganisms, the genetic manipulation of new strains, and the use of inexpensive agro-industrial byproducts as substrates. Another efficient strategy involves the concomitant synthesis of other products with high market value and as such, the successful co-production of levan was demonstrated with fructooligosaccharides, ethanol, sorbitol, poly-ε-lysine, poly-γ-glutamic acid and polyhydroxyalkanoates. This paper offers a systematic review of important aspects regarding recent strategies involving the simultaneous synthesis of levan and other bioproducts of aggregate value reported to date and discusses the challenges and opportunities for its large-scale production and applications.

Catalytic Production of Functional Monomers from Lysine and Their Application in High-Valued Polymers

Lysine is a key raw material in the chemical industry owing to its sustainability, mature fermentation process and unique chemical structure, besides being an important nutritional supplement. Multiple commodities can be produced from lysine, which thus inspired various catalytic strategies for the production of these lysine-based chemicals and their downstream applications in functional polymer production. In this review, we present a fundamental and comprehensive study on the catalytic production process of several important lysine-based chemicals and their application in highly valued polymers. Specifically, we first focus on the synthesis process and some of the current industrial production methods of lysine-based chemicals, including ε-caprolactam, α-amino-ε-caprolactam and its derivatives, cadaverine, lysinol and pipecolic acid. Second, the applications and prospects of these lysine-based monomers in functional polymers are discussed such as derived poly (lysine), nylon-56, nylon-6 and its derivatives, which are all of growing interest in pharmaceuticals, human health, textile processes, fire control and electronic manufacturing. We finally conclude with the prospects of the development of both the design and synthesis of new lysine derivatives and the expansion of the as-synthesized lysine-based monomers in potential fields.

Efficiency of Multifunctional Antibacterial Hydrogels for Chronic Wound Healing in Diabetes: A Comprehensive Review

Diabetic chronic wounds or amputation, which are complications of diabetes mellitus (DM), are a cause of great suffering for diabetics. In addition to the lack of oxygen, elevated reactive oxygen species (ROS) and reduced vascularization, microbial invasion is also a critical factor that induces non-healing chronic diabetic wounds, ie, wounds still remaining in the stage of inflammation, after which the wound tissue begins to age and becomes necrotic. To clear up the infection, alleviate the inflammation in the wound and prevent necrosis, many kinds of hydrogel have been fabricated to eliminate infections with pathogens. The unique properties of hydrogels make them ideally suited to wound dressings because they provide a moist environment for wound healing and act as a barrier against bacteria. This review article will mainly cover the recent developments and innovations of antibacterial hydrogels for diabetic chronic wound healing.

Study of the mechanism of ε-poly-l-lysine as an antifungal on Candida albicans and Saccharomyces cerevisiae

The antimicrobial activity of ε-poly-l-lysine (EPL) has been documented, but its antifungal activity on yeast is not well defined and its mechanism of action has been vaguely explained. Our studies revealed that on both, Candida albicans and Saccharomyces cerevisiae, the minimum inhibitory concentration (MIC) and the minimum fungicidal concentration (MFC) were 250 μg·mL^-1; EPL produced a K⁺ and Ca²⁺ efflux, and at higher concentrations also an efflux of material absorbing at 260 nm, small peptides, and phosphate is produced, along with the inhibition of fermentation and extracellular acidification and respiration. Moreover, growth was inhibited, reactive oxygen species (ROS) production increased, and cell viability decreased. The polycation also produced plasma membrane potential hyperpolarization. The effects were dependent both on the cell quantity and polycation concentration, as well as the media used. The plasma membrane disruption was confirmed by TEM and PI staining.

Recent advances in microbial ε-poly-L-lysine fermentation and its diverse applications

The naturally occurring homo-polyamide biopolymer, ε-poly-L-lysine (ε-PL) consists of 25-35 L-lysine residues with amide linkages between α-carboxyl groups and ε-amino groups. ɛ-PL exhibits several useful properties because of its unusual structure, such as biodegradability, water solubility, no human toxicity, and broad-spectrum antibacterial activities; it is widely applied in the fields of food, medicine, clinical chemistry and electronics. However, current industrial production of ε-PL is only performed in a few countries. Based on an analysis of the physiological characteristics of ε-PL fermentation, current advances that enhance ε-PL fermentation, from strain improvement to product isolation are systematically reviewed, focusing on: (1) elucidating the metabolic pathway and regulatory mechanism of ε-PL synthesis; (2) enhancing biosynthetic performance through mutagenesis, fermentation optimization and metabolic engineering; and (3) understanding and improving the biological activity and functional properties of ε-PL. Finally, perspectives on engineering and exploiting ε-PL as a source material for the production of various advanced materials are also discussed, providing scientific guidelines for researchers to further improve the ε-PL fermentation process.

A Study of Type II ɛ-PL Degrading Enzyme (pldII) in Streptomyces albulus through the CRISPRi System

ε-Poly-L-lysine (ε-PL) is a widely used antibacterial peptide polymerized of 25–35 L-lysine residues. The antibacterial effect of ε-PL is closely related to the polymerization degree. However, the mechanism of ε-PL degradation in S. albulus remains unclear. This study utilized the integrative plasmid pSET152-based CRISPRi system to transcriptionally repress the ε-PL degrading enzyme (pldII). The expression of pldII is regulated by changing the recognition site of dCas9. Through the ε-PL bacteriostatic experiments of repression strains, it was found that the repression of pldII improves the antibacterial effect of the ε-PL product. The consecutive MALDI-TOF-MS results confirmed that the molecular weight distribution of the ε-PL was changed after repression. The repression strain S1 showed a particular peak with a polymerization degree of 44, and other repression strains also generated ε-PL with a polymerization degree of over 40. Furthermore, the homology modeling and substrate docking of pldII, a typical endo-type metallopeptidase, were performed to resolve the degradation mechanism of ε-PL in S. albulus. The hydrolysis of ε-PL within pldII, initiated from the N-terminus by two amino acid-binding residues, Thr194 and Glu281, led to varying levels of polymerization of ε-PL.

Biotechnological production and application of epsilon-poly-L-lysine (ε-PL): biosynthesis and its metabolic regulation

Epsilon-poly-L-lysine (ε-PL) is an unusual biopolymer composed of L-lysine produced by several microorganisms, especially by the genus Streptomyces. Due to its excellent antimicrobial activity, good water solubility, high safety, and biodegradable nature, ε-PL with a GRAS status has been widely used in food and pharmaceutical industries. In the past years, studies have focused on the biotechnological production of ɛ-PL, the biosynthetic mechanism of microbial ɛ-PL, and its application. To provide new perspectives from recent advances, the review introduced the methods for the isolation of ɛ-PL producing strains and the biosynthetic mechanism of microbial ɛ-PL. We summarized the strategies for the improvement of ɛ-PL producing strains, including physical and chemical mutagenesis, ribosome engineering and gene engineering, and compared the different metabolic regulation strategies for improving ɛ-PL production, including medium optimization, nutrient supply, pH control, and dissolved oxygen control. Then, the downstream purification methods of ɛ-PL and its recent applications in food and medicine industries were introduced. Finally, we also proposed the potential challenges and the perspectives for the production of ε-PL.

Microbial Metabolite Inspired β-Peptide Polymers Displaying Potent and Selective Antifungal Activity

Potent and selective antifungal agents are urgently needed due to the quick increase of serious invasive fungal infections and the limited antifungal drugs available. Microbial metabolites have been a rich source of antimicrobial agents and have inspired the authors to design and obtain potent and selective antifungal agents, poly(DL-diaminopropionic acid) (PDAP) from the ring-opening polymerization of β-amino acid N-thiocarboxyanhydrides, by mimicking ε-poly-lysine. PDAP kills fungal cells by penetrating the fungal cytoplasm, generating reactive oxygen, and inducing fungal apoptosis. The optimal PDAP displays potent antifungal activity with minimum inhibitory concentration as low as 0.4 µg mL^-1 against Candida albicans, negligible hemolysis and cytotoxicity, and no susceptibility to antifungal resistance. In addition, PDAP effectively inhibits the formation of fungal biofilms and eradicates the mature biofilms. In vivo studies show that PDAP is safe and effective in treating fungal keratitis, which suggests PDAPs as promising new antifungal agents.

AdpA, a developmental regulator, promotes ε-poly-l-lysine biosynthesis in Streptomyces albulus

Background

AdpA is a global regulator of morphological differentiation and secondary metabolism in Streptomyces, but the regulatory roles of the Streptomyces AdpA family on the biosynthesis of the natural product ε-poly-l-lysine (ε-PL) remain unidentified, and few studies have focused on increasing the production of ε-PL by manipulating transcription factors in Streptomyces.

Results

In this study, we revealed the regulatory roles of different AdpA homologs in ε-PL biosynthesis and morphological differentiation and effectively promoted ε-PL production and sporulation in Streptomycesalbulus NK660 by heterologously expressing adpA from S.neyagawaensis NRRLB-3092 (adpA_Sn). First, we identified a novel AdpA homolog named AdpA_Sa in S.albulus NK660 and characterized its function as an activator of ε-PL biosynthesis and morphological differentiation. Subsequently, four heterologous AdpA homologs were selected to investigate their phylogenetic relationships and regulatory roles in S.albulus, and AdpA_Sn was demonstrated to have the strongest ability to promote both ε-PL production and sporulation among these five AdpA proteins. The ε-PL yield of S.albulus heterologously expressing adpA_Sn was approximately 3.6-fold higher than that of the control strain. Finally, we clarified the mechanism of AdpA_Sn in enhancing ε-PL biosynthesis and its effect on ε-PL polymerization degree using real-time quantitative PCR, microscale thermophoresis and MALDI-TOF–MS. AdpA_Sn was purified, and its seven direct targets, zwf, tal, pyk2, pta, ack, pepc and a transketolase gene (DC74_2409), were identified, suggesting that AdpA_Sn may cause the redistribution of metabolic flux in central metabolism pathways, which subsequently provides more carbon skeletons and ATP for ε-PL biosynthesis in S.albulus.

Conclusions

Here, we characterized the positive regulatory roles of Streptomyces AdpA homologs in ε-PL biosynthesis and their effects on morphological differentiation and reported for the first time that AdpA_Sn promotes ε-PL biosynthesis by affecting the transcription of its target genes in central metabolism pathways. These findings supply valuable insights into the regulatory roles of the Streptomyces AdpA family on ε-PL biosynthesis and morphological differentiation and suggest that AdpA_Sn may be an effective global regulator for enhanced production of ε-PL and other valuable secondary metabolites in Streptomyces.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01785-6.

Facile and green synthesis of reduced graphene oxide/loofah sponge for Streptomyces albulus immobilization and ε-poly-l-lysine production

Facile and green fabrication of reduced graphene oxide on loofah sponge (rGOLS) carrier was applied for cell immobilization of ε-Poly-l-lysine (ε-PL) production. Due to surface properties including large specific surface area, high polarity, and low interaction energy, rGOLS-1 was employed as the optimum rGOLS to enhance immobilization of Streptomyces albulus. Compared with raw LS, batch experiments showed rGOLS-1 facilitated superior cell vitality for ε-PL production due to the presence of reduced graphene oxide. In the sequential fed-batch cultivation of Streptomyces albulus using rGOLS-1 with an aerobic plant fibrous-bed bioreactor (rGOLS-1-AFPB), the maximum ε-PL concentration and productivity reached to 39.2 ± 0.63 g/L and 0.48 g/L/h. The cells immobilized in rGOLS-1 with high vitality and ε-PL production efficiency were reused six times over a period of 624 h. This research afforded an effective approach to enhance the fermentation performance of immobilized cells with the design of an advanced immobilization carrier.

Epsilon-poly-L-lysine: Recent Advances in Biomanufacturing and Applications

ε-poly-L-lysine (ε-PL) is a naturally occurring poly(amino acid) of varying polymerization degree, which possesses excellent antimicrobial activity and has been widely used in food and pharmaceutical industries. To provide new perspectives from recent advances, this review compares several conventional and advanced strategies for the discovery of wild strains and development of high-producing strains, including isolation and culture-based traditional methods as well as genome mining and directed evolution. We also summarize process engineering approaches for improving production, including optimization of environmental conditions and utilization of industrial waste. Then, efficient downstream purification methods are described, including their drawbacks, followed by the brief introductions of proposed antimicrobial mechanisms of ε-PL and its recent applications. Finally, we discuss persistent challenges and future perspectives for the commercialization of ε-PL.

Effects of ethanol stress on epsilon-poly-l-lysine (ε-PL) biosynthesis in Streptomyces albulus X-18

The aim of the study was to reveal the effects of ethanol stress on the production of epsilon-poly-l-lysine (ε-PL) in Streptomyces albulus X-18. The results showed that biomass and the utilization of glucose were respectively increased by ethanol stress. The ε-PL yield was increased by 41.42 % in the shake flask and 37.02 % in 10 L fermenter with 1% (v/v) ethanol. The morphology of colonies and mycelia showed significant differences. The intracellular reactive oxygen species level was increased by about 100 %. The ratio of unsaturated fatty acids to saturated fatty acids in the cell membrane was increased by ethanol stress. Isobaric Tags for Relative and Absolute Quantitation (iTRAQ) proteomic profile showed that 265 identified proteins were differentially expressed. The differentially expressed proteins (DEPs) were mainly involved in biological processes. The up-regulated DEPs were mainly involved in the redox reaction and stress response. The metabolic flux of l-Asp was shifted to l-Lys biosynthesis, and the DAP pathway was strengthened. Protein-protein interaction analysis showed that 30 DEPs interacted with l-Lys biosynthesis. The changes of ten proteins by Parallel Reaction Monitoring (PRM) were consistent with those by iTRAQ. The study provided valuable clues to better understand the mechanism of ε-PL biosynthesis improvement by ethanol stress.

Distribution of ε-Poly-l-Lysine Synthetases in Coryneform Bacteria Isolated from Cheese and Human Skin

ε-Poly-l-lysine is a potent antimicrobial produced through fermentation of Streptomyces and used in many Asian countries as a food preservative. It is synthesized and excreted by a special nonribosomal peptide synthetase (NRPS)-like enzyme called Pls. In this study, we discovered a gene from cheese bacterium Corynebacterium variabile that showed high similarity to the Pls from Streptomyces in terms of domain architecture and gene context. By cloning it into Streptomyces coelicolor with a Streptomyces albulus Pls promoter, we confirmed that its product is indeed ε-poly-l-lysine. A comprehensive sequence analysis suggested that Pls genes are widely spread among coryneform actinobacteria isolated from cheese and human skin; 14 out of 15 Brevibacterium isolates and 10 out of 12 Corynebacterium isolates contain it in their genomes. This finding raises the possibility that ε-poly-l-lysine as a bioactive secondary metabolite might be produced and play a role in the cheese and skin ecosystems.IMPORTANCE Every year, microbial contamination causes billions of tons of food wasted and millions of cases of illness. ε-Poly-l-lysine has potent, wide-spectrum inhibitory activity and is heat stable and biodegradable. It has been approved for food preservation by an increasing number of countries. ε-Poly-l-lysine is produced from soil bacteria of the genus Streptomyces, also producers of various antibiotic drugs and toxins and not considered to be a naturally occurring food component. The frequent finding of pls in cheese and skin bacteria suggests that ε-poly-l-lysine may naturally exist in cheese and on our skin, and ε-poly-l-lysine producers are not limited to filamentous actinobacteria.

Expanding the lysine industry: biotechnological production of l-lysine and its derivatives

l-lysine is an essential amino acid that contains various functional groups including α-amino, ω-amino, and α-carboxyl groups, exhibiting high reaction potential. The derivatization of these functional groups produces a series of value-added chemicals, such as cadaverine, glutarate, and d-lysine, that are widely applied in the chemical synthesis, cosmetics, food, and pharmaceutical industries. Here, we review recent advances in the biotechnological production of l-lysine and its derivatives and expatiate key technological strategies. Furthermore, we also discuss the existing challenges and potential strategies for more efficient production of these chemicals.

MSNs-Based Nanocomposite for Biofilm Imaging and NIR-Activated Chem/Photothermal/Photodynamic Combination Therapy

Bacterial infections caused by biofilms are severe clinical problems, resulting in high drug resistance by limiting the penetration of antibiotics. Herein, a near-infrared (NIR)-activated chem/photodynamic/photothermal combined therapeutic agent is proposed by loading fluorescein isothiocyanate (FITC), ultrasmall copper sulfide nanoparticles (Cu_2-xSNPs), and ε-polylysine (PLL) onto mesoporous silica nanoparticles (MSNs) through a layer-by-layer self-assembly approach. FITC-doped MSNs are prepared to monitor the permeability and accumulation of nanocomposites into biofilms. MSNs can also act as hosts for the synthesis of ultrasmall Cu_2-xSNPs, which has effective photodynamic and photothermal ablation against bacteria under NIR light irradiation. Moreover, biodegradable PLL introduced can not only enhance adhesion toward the bacterial surface to increase the effectiveness of phototherapy but also damage bacteria through electrostatic interaction. As a result, the prepared nanocomposites could not only penetrate biofilms but also ablate biofilms through combined chem/photodynamic/photothermal effects under NIR light irradiation. Furthermore, the nanocomposites could treat bacterial infections in vivo with negligible tissue toxicity. Overall, the finely designed nanocomposites are anticipated to display promising applications in imaging-guided chem/photodynamic/photothermal combined therapy for bacterial infections.

Development of next-generation antimicrobial hydrogel dressing to combat burn wound infection

Infection of burn wounds often leads to poor healing, sepsis, disability, or even death. Traditional care focuses on early debridement, fluid resuscitation, and intravenous antibiotics but these are often inadequate due to compromised vasculature limiting systemic antibiotics effectiveness. Biofilms in burn wounds are barriers to treatment and are associated with the transition of wounds from acute to chronic non-healing state. Current topical treatments for burn wounds include skin substitutes impregnated with skin or stem cells that promote healing; or hydrogels delivering an antibiotic, silver, or synthetic antimicrobial peptides. The success of currently available products is varied and, in some cases, very limited due to associated cytotoxicity to mammalian cells, the ability to only fight extracellular biofilm infections, and the ever-increasing development of antimicrobial resistance (AMR). There is, therefore, a high clinical need for the development of next-generation hydrogel wound dressings, to combat bacterial burn wound infection. A recent paper by Khan et al. (Bioscience Reports (2020) 39, https://doi.org/10.1042/BSR20190504) highlights the development of a catechol cross-linked antimicrobial peptide hydrogel, adding to the body of literature describing innovative solutions with better delivery systems for antimicrobial peptides, and identifying a promising future biomaterial for development of novel hydrogel dressing to combat multi-drug resistant bacterial infections in burn wounds.

Poly(ε-lysine) and its derivatives via ring-opening polymerization of biorenewable cyclic lysine

Minireview focused on poly(ε-lysine) and its derivatives via ring-opening polymerization of biorenewable cyclic lysine.

One-pot preparation of a multi-functional enzymatically generated gelatin hydrogel with controllable antibacterial and hemorheological properties

The creation of multi-functional bio-hydrogels with tunable properties that meet in vivo demands is significant but remains challenging. Inspired by host-guest chemistry, a novel multi-functional gelatin-based bio-hydrogel with tunable antibacterial and hemorheological properties (TAH-GEL) is synthesized via an in situ one-pot strategy. TAH-GEL not only exhibits excellent mechanical properties but also shows promising self-healing and bio-compatibility features. For the first time, this biomaterial presents controllable antibacterial and hemorheological properties by controlling the TAH-GEL polypseudorotaxane motif. The resulting bio-hydrogel is easy to prepare and delivers superior performance, making it a powerful tool for bio-applications, such as hemostatic materials.

Extraction and purification of ε-poly-l-lysine from fermentation broth using an ethanol/ammonium sulfate aqueous two-phase system combined with ultrafiltration

ε-Poly-l-lysine (ε-PL) serves as a natural food preservative and is manufactured mainly by extraction from microbial fermentation broth using ion-exchange chromatography. In order to develop an alternative purification strategy, an environmentally friendly alcohol/salt aqueous two-phase system (ATPS) was explored in this study for ε-PL extraction. A study of the separation of ε-PL in different alcohol/salt systems showed that ethanol/ammonium sulfate ATPS exhibited the highest ε-PL partition coefficient and recovery ratio. Based on the phase diagram, the effect of phase composition on partition, and the removal of pigment and protein, an ATPS that was composed of 20% (w/w) ethanol and 20% (w/w) ammonium sulfate, with a feedstock at pH 9.5, was developed to extract ε-PL from the fermentation broth. This achieved an ε-PL recovery ratio of 96.15% with an ε-PL purity of 40.23% after triplicate extractions. Subsequently, desalting by ultrafiltration led to a final ε-PL product of 92.39% purity and 87.72% recovery. The ethanol/ammonium sulfate ATPS provides a new possibility for ε-PL purification.

Enhanced ε-Poly-L-Lysine Production by the Synergistic Effect of ε-Poly-L-Lysine Synthetase Overexpression and Citrate in Streptomyces albulus

ε-Poly-L-lysine (ε-PL) is a natural amino acid polymer produced by microbial fermentation. It has been mainly used as a preservative in the food and cosmetics industries, as a drug carrier in medicines, and as a gene carrier in gene therapy. ε-PL synthase is the key enzyme responsible for the polymerization of L-lysine to form ε-PL. In this study, the ε-PL synthase gene was overexpressed in Streptomyces albulus CICC 11022 by using the kasOp^∗ promoter and the ribosome binding site from the capsid protein of phage ϕC31, which resulted in a genetically engineered strain Q-PL2. The titers of ε-PL produced by Q-PL2 were 88.2% ± 8.3% higher than that produced by the wild strain in shake flask fermentation. With the synergistic effect of 2 g/L sodium citrate, the titers of ε-PL produced by Q-PL2 were 211.2% ± 17.4% higher than that produced by the wild strain. In fed-batch fermentations, 20.1 ± 1.3 g/L of ε-PL was produced by S. albulus Q-PL2 in 72 h with a productivity of 6.7 ± 0.4 g/L/day, which was 3.2 ± 0.3-fold of that produced by the wild strain. These results indicate that ε-PL synthase is one of the rate-limiting enzymes in ε-PL synthesis pathway and lays a foundation for further improving the ε-PL production ability of S. albulus by metabolic engineering.

Catechol cross-linked antimicrobial peptide hydrogels prevent multidrug-resistant Acinetobacter baumannii infection in burn wounds

Hospital-acquired infections are common in burn patients and are the major contributors of morbidity and mortality. Bacterial infections such as Staphylococcus aureus (S. aureus) and Acinetobacter baumannii (A. baumannii) are difficult to treat due to their biofilm formation and rapidly acquiring resistance to antibiotics. This work presents a newly developed hydrogel that has the potential for treating bacterial wound infections. The hydrogel formulation is based on an antimicrobial peptide (AMP), epsilon-poly-l-lysine (EPL) and catechol, which was cross-linked via mussel-inspired chemistry between the amine and phenol groups. In vitro studies showed that EPL-catechol hydrogels possess impressive antimicrobial and antibiofilm properties toward multidrug-resistant A. baumannii (MRAB). In addition, cytotoxicity study with the clonal mouse myoblast cell line (C2C12) revealed the good biocompatibility of this hydrogel. Furthermore, we created a second-degree burn wound on the mice dorsal skin surface followed by contamination with MRAB. Our results showed that the hydrogel significantly reduced the bacterial burden by more than four orders of magnitude in infected burn wounds. Additionally, there was no significant histological alteration with hydrogel application on mice skin. Based on these results, we concluded that EPL-catechol hydrogel is a promising future biomaterial to fight against multidrug-resistant bacterial infections.

Effect of ion form of the ion-exchange resin on ε-poly-l-lysine purification from microbial fermentation broth

ε-Poly-l-lysine (ε-PL) is an added-value natural product with widespread application in the fields of food, pharmaceuticals and biopolymer materials. However, the high production cost reduces its application. To improve the efficiency of ε-PL purification for decreasing the cost of downstream processes, the ion form of the ion-exchange resin, which is widely used for ε-PL purification, was investigated systematically in this study. Among eleven cation-exchange resins tested, the Amberlite IRC-50 resin offered the best adsorption capability and the highest desorption ratio. The adsorption kinetics of IRC-50 resin with H⁺, Na⁺ and NH₄ ⁺ ion forms followed a pseudo-second-order model. The dynamic adsorption and desorption parameters of ε-PL were optimized with a column packed with IRC-50 resin with Na⁺ and NH₄ ⁺. It is suggested that NH₄ ⁺ is the optimal ion form of IRC-50 resin for ε-PL extraction. Under optimal conditions, the IRC-50 resin with NH₄ ⁺ achieved the highest ε-PL adsorption capability, purity and recovery ratio of 307.96 mg g^-1, 76.52% and 96.2%, respectively. After further purification, a final ε-PL purity of 97.10% was achieved with a total recovery ratio of 66.01%. This is the first report on improving the ε-PL purification efficiency through optimizing the ion form of the ion-exchange resin. Moreover, it would offer guidance for other natural product recovery processes by ion-exchange chromatography.

Discovery of a Short-Chain ε-Poly-l-lysine and Its Highly Efficient Production via Synthetase Swap Strategy

ε-Poly-l-lysine (ε-PL) is a natural antimicrobial cationic peptide, which is generally recognized as safe for use as a food preservative. To date, the production capacity of strains that produce low-molecular weight ε-PL remains very low and thus unsuitable for industrial production. Here, we report a new low-molecular weight ε-PL-producing Kitasatospora aureofaciens strain. The ε-PL synthase gene of this strain was cloned into a high ε-PL-producing Streptomyces albulus strain. The resulting recombinant strain efficiently produced ε-PL with a molecular weight of 1.3-2.3 kDa and yielded of 23.6 g/L following fed-batch fermentation in a 5 L bioreactor. In addition, circular dichroism spectra showed that this ε-PL takes on a conformation similar to an antiparallel pleated-sheet. Moreover, it demonstrated better antimicrobial activity against yeast compared to the 3.2-4.5 kDa ε-PL. This study provides a highly efficient strategy for production of the low-molecular weight ε-PL, which helps to expand its potential applications.

Efficiently activated ε-poly-L-lysine production by multiple antibiotic-resistance mutations and acidic pH shock optimization in Streptomyces albulus

ε‐Poly‐L‐lysine (ε‐PL) is a food additive produced by Streptomyces and is widely used in many countries. Working with Streptomyces albulus FEEL‐1, we established a method to activate ε‐PL synthesis by successive introduction of multiple antibiotic‐resistance mutations. Sextuple mutant R6 was finally developed by screening for resistance to six antibiotics and produced 4.41 g/L of ε‐PL in a shake flask, which is 2.75‐fold higher than the level produced by the parent strain. In a previous study, we constructed a double‐resistance mutant, SG‐31, with high ε‐PL production of 3.83 g/L and 59.50 g/L in a shake flask and 5‐L bioreactor, respectively. However, we found that R6 did not show obvious advantages in fed‐batch fermentation when compared with SG‐31. For further activation of ε‐PL synthesis ability, we optimized the fermentation process by using an effective acidic pH shock strategy, by which R6 synthetized 70.3 g/L of ε‐PL, 2.79‐fold and 1.18‐fold greater than that synthetized by FEEL‐1 and SG‐31, respectively. To the best of our knowledge, this is the highest reported ε‐PL production to date. This ε‐PL overproduction may be due to the result of R99P and Q856H mutations in ribosomal protein S12 and RNA polymerase, respectively, which may be responsible for the increased transcription of the ε‐poly‐lysine synthetase gene (pls) and key enzyme activities in the Lys synthesis metabolic pathway. Consequently, ε‐PL synthetase activity, intracellular ATP, and Lys concentrations were improved and directly contributed to ε‐PL overproduction. This study combined ribosome engineering, high‐throughput screening, and targeted strategy optimization to accelerate ε‐PL production and probe the fermentation characteristics of hyperyield mutants. The information presented here may be useful for other natural products produced by Streptomyces.

Production of chemicals and proteins using biomass-derived substrates from a Streptomyces host

Bioproduction using microbes from biomass feedstocks is of interest in regards to environmental problems and cost reduction. Streptomyces as an industrial microorganism plays an important role in the production of useful secondary metabolites for various applications. This strain also secretes a wide range of extracellular enzymes which degrade various biopolymers in nature, and it consumes these degrading substrates as nutrients. Hence, Streptomyces can be employed as a cell factory for the conversion of biomass-derived substrates into various products. This review focuses on the following two points: (1) Streptomyces as a producer of enzymes for degrading biomass-derived polysaccharides and polymers; and, (2) wild-type and engineered strains of Streptomyces as a host for chemical production from biomass-derived substrates.

Production of ε-poly-lysine by Streptomyces albulus PD-1 via solid-state fermentation

The aim of this study was to produce ε-poly-lysine (ε-PL) by Streptomyces albulus PD-1 through solid-state fermentation (SSF) using agro-industrial residues. Maximum ε-PL production (86.62mg/g substrate) was obtained a mixed substrate of rapeseed cake and wheat bran (2:1, w/w) supplemented with glucose (4%, w/w), (NH₄)₂SO₄ (3%, w/w), with an initial moisture content of 65%, initial pH of 7.0 and inoculum size of 13% v/w, incubated at 30°C for 8days. The results of scanning electron microscopy indicated that the filamentous thallus could penetrate the substrate surface. Moreover, repeated-batch SSF was successfully conducted 8 times using 10% substrate as seeds for the next fermentation cycle, and the results suggest that repeated-batch SSF is more efficient because of the shortened lag phase. To the best of our knowledge, this is the first report on ε-PL production using the SSF process.

Noncytotoxic polycaprolactone-polyethyleneglycol-ε-poly(l-lysine) triblock copolymer synthesized and self-assembled as an antibacterial drug carrier

The PCL₃₅-b-PEG₄₅-b-EPL₂₃ vesicles perform well in vitro drug release and antibacterial activity against Gram⁻ and Gram⁺ bacteria with low cytotoxicity.