Co-culture of Lactobacillus delbrueckii and engineered Lactococcus lactis enhances stoichiometric yield of D-lactic acid from whey permeate

2,3-Butanediol dehydrogenase is more efficient than acetoin reductase at metabolizing reserve carbon to improve carbon cycling pathways in Lactococcus lactis N8

Acetoin (AC) and 2,3-butanediol (2,3-BDO) are metabolites produced by lactic acid bacteria using glucose as a carbon source. These two metabolites act as carbon reserves and can be reutilised by the cells. In this study, we investigated the enzymatic characteristics of acetoin reductase (ButA) and 2,3-butanediol dehydrogenase (ButB). The performance of butA or/and butB knockout mutants of Lactococcus lactis N8 was evaluated. ButA and ButB were heterologously expressed in E. coli, and their enzymatic characteristics were measured in vitro under different pH, temperature, and metal ion conditions. Kinetic parameters of the two enzymes indicated that ButA exhibited better catalytic efficiency with AC, whereas ButB performed better with 2,3-BDO. The dehydrogenase activity of ΔbutA, ΔbutB, and ΔbutBA strains were detected in vitro with AC or 2,3-BDO added medium. The ΔbutA mutant was found to metabolize both AC and 2,3-BDO more efficiently than the ΔbutB mutant. This study provides a comprehensive insight about the metabolic carbon reserve pool and cyclic pathways involving AC and 2,3-BDO in L. lactis N8.

Tailoring non-axenic lactic acid fermentation from cheese whey permeate targeting a flexible lactic acid platform

Lactic acid (LA) is an important biobased platform chemical, with potential applications in synthetising a wide range of chemical products or serving as feedstock for various bioprocesses. Industrial LA production via pure culture fermentation is characterized by high operational costs and utilizes food-grade sugars, thereby reducing the feasibility of LA applications. In this context, our research focussed on valorising the largest dairy side stream, cheese whey permeate, through the use of mixed microbial communities. We evaluated the effect of different operational parameters (temperature, pH and hydraulic retention time) in non-axenic fermentations on productivity, yield, concentration, optical purity, and community. Our findings revealed that operating at mildly thermophilic conditions (45 °C) resulted in highly selective LA production, and significantly augmented the LA yield, and productivity, compared to higher temperatures (50-55 °C). In addition, operating at circumneutral pH conditions (6.0-6.5) led to significantly increased the LA fermentation performance compared to the conventional acid pH conditions (≤5.5). This led to an unprecedented LA productivity of 27.4 g/L/h with a LA yield of 70.0% which is 2.5 times higher compared to previous reported maximum. Additionally, varying pH levels influenced the optical purity of LA: we achieved an optical L-LA purity of 98.3% at pH 6.0-6.5, and an optical D-LA purity of 91.3% at a pH of 5.5. A short hydraulic retention time of less than 12 h was crucial for selective LA production. This process also yielded a microbial biomass composed of 90.3-98.6% Lactobacillus delbrueckii, which could be potentially valorised as probiotic or protein ingredient in food or feed products. Our work shows that by careful selection of operational conditions, the overall performance can be significantly increased compared to the state-of-the-art. These results highlight the potential of non-sterile LA fermentation and show that careful selection of simple reactor operation parameters can maximize process performance. A preliminary assessment suggests that valorising EU cheese whey permeate could increase LA and poly-LA production by 40 and 125 times, respectively. This could also lead to the production of 4,000 kton protein-rich biomass, potentially reducing CO2 emissions linked to EU food and feed production by 4.87% or 2.77% respectively.

Enhanced production of lactic acid from pretreated rice straw using co-cultivation of Bacillus licheniformis and Bacillus sonorenesis

Lactic acid (LA) production from sugar mixture derived from lignocellulosic rice straw employing co- culture system of thermotolerant and inhibitor tolerant Bacillus licheniformis DGB and Bacillus sonorenesis DGS15 was carried out. In minimal media, both the strains of Bacillus DGB and DGS15 worked together by efficiently utilising glucose and xylose respectively. Response Surface Methodology (RSM) was used for optimisation of pretreatment of rice straw to achieve maximum yield of 50.852 g/L total reducing sugar (TRS) from 100 gm of rice straw biomass. Pretreatment of rice straw resulted in its delignification, as confirmed by FTIR spectroscopy, since the peak at 1668 cm-1 disappeared due to removal of lignin and scanning electron microscopy (SEM) revealed disruption in structural and morphological features. Crystallinity index (CrI) of treated rice straw increased by 15.54% in comparison to native biomass. DGB and DGS15 individually yielded 0.64 g/g and 0.82 g/g lactic acid respectively, where as their co-cultivation led to effective utilisation of both glucose and xylose within 15 h (70%) and complete utilisation in 48 h, producing 49.75 g/L LA with a yield of 0.98 g/g and productivity of 1.036 g/L/h, and resulting in reduction in fermentation time. Separate hydrolysis of rice straw and co-fermentation (SHCF) of hydrolysates by Bacillus spp. enhanced the production of lactic acid, can circumvent challenges in biorefining of lignocellulosic biomass.

The expression of HIV-1 tat in Lactococcus lactis

Efficient expression of functional proteins in heterologous hosts has become the pivotal focus of modern biotechnology and biomedical research. To this end, multiple alternatives to E. coli are being explored for recombinant protein expression. L. lactis, being a gram-positive organism, circumvents the need for an endotoxin removal step during protein purification. We report here the optimisation of the expression of HIV-1 Tat, a notoriously difficult protein, in Lactococcus lactis system. We evaluated five different promoters in two different Lactococcus lactis strains and examined the effect of pH, glucose, and induction time on the yield and purity of Tat. Finally, the recombinant Tat was functionally competent in transactivating the HIV-1 promoter in HLM-1 reporter cells. Our work provides a scaffold for future work on the expression of toxic proteins in Lactococcus lactis.

Host genetics and gut microbiota jointly regulate blood biochemical indicators in chickens

Blood biochemical indicators play a crucial role in assessing an individual's overall health status and metabolic function. In this study, we measured five blood biochemical indicators, including total cholesterol (CHOL), low-density lipoprotein cholesterol (LDL-CH), triglycerides (TG), high-density lipoprotein cholesterol (HDL-CH), and blood glucose (BG), as well as 19 growth traits of 206 male chickens. By integrating host whole-genome information and 16S rRNA sequencing of the duodenum, jejunum, ileum, cecum, and feces microbiota, we assessed the contributions of host genetics and gut microbiota to blood biochemical indicators and their interrelationships. Our results demonstrated significant negative phenotypic and genetic correlations (r =  - 0.20 ~  - 0.67) between CHOL and LDL-CH with growth traits such as body weight, abdominal fat content, muscle content, and shin circumference. The results of heritability and microbiability indicated that blood biochemical indicators were jointly regulated by host genetics and gut microbiota. Notably, the heritability of HDL-CH was estimated to be 0.24, while the jejunal microbiability for BG and TG reached 0.45 and 0.23. Furthermore, by conducting genome-wide association study (GWAS) with the single-nucleotide polymorphism (SNPs), insertion/deletion (indels), and structural variation (SV), we identified RAP2C, member of the RAS oncogene family (RAP2C), dedicator of cytokinesis 11 (DOCK11), neurotensin (NTS) and BOP1 ribosomal biogenesis factor (BOP1) as regulators of HDL-CH, and glycerophosphodiester phosphodiesterase domain containing 5 (GDPD5), dihydrodiol dehydrogenase (DHDH), and potassium voltage-gated channel interacting protein 1 (KCNIP1) as candidate genes of BG. Moreover, our findings suggest that cecal RF39 and Clostridia_UCG_014 may be linked to the regulation of CHOL, and jejunal Streptococcaceae may be involved in the regulation of TG. Additionally, microbial GWAS results indicated that the presence of gut microbiota was under host genetic regulation. Our findings provide valuable insights into the complex interaction between host genetics and microbiota in shaping the blood biochemical profile of chickens. KEY POINTS: • Multiple candidate genes were identified for the regulation of CHOL, HDL-CH, and BG. • RF39, Clostridia_UCG_014, and Streptococcaceae were implicated in CHOL and TG modulation. • The composition of gut microbiota is influenced by host genetics.

Development of Base Editors for Simultaneously Editing Multiple Loci in Lactococcus lactis

Lactococcus lactis serves as the most extensively studied model organism and an important dairy species. Though CRISPR-Cas9 systems have been developed for robust genetic manipulations, simultaneously editing multiple endogenous loci in L. lactis is still challenging. Herein, we first report the development of a double-strand break-free, robust, multiloci editing system CRISPR-deaminase-assisted base editor (CRISPR-DBE), which comprises a cytidine (CRISPR-cDBE) and an adenosine deaminase-assisted base editor (CRISPR-aDBE). Specifically targeted by a sgRNA, CRISPR-cDBE can efficiently introduce a cytidine-to-thymidine mutation and CRISPR-aDBE can high-efficiently convert adenosine to guanosine within a 5 nt editing window. CRISPR-cDBE was validated and successfully applied to simultaneously inactivate multiple genes using a single plasmid in L. lactis strain NZ9000. Meanwhile, the temperature-sensitive plasmid of CRISPR-DBE can be cured quickly, and the continuous gene editing of L. lactis has been achieved. Furthermore, CRISPR-cDBE can also efficiently convert the targeted C to T in a nisin-producing, industrial L. lactis strain F44. Finally, we applied genome-wide bioinformatics analysis to determine the scope of gene inactivation for these base editors using different Cas9 variants and evaluated the preference of SpGn and SpRYn variants for the protospacer adjacent motif in L. lactis NZ9000. Taken together, our study provides a powerful tool for simultaneously editing multiple loci in L. lactis, which may have a wide range of industrial applications in the future.

Biocatalytic conversion of a lactose-rich dairy waste into D-tagatose, D-arabitol and galactitol using sequential whole cell and fermentation technologies

Dairy industry waste has been explored as a cheap and attractive raw material to produce various commercially important rare sugars. In this study, a lactose-rich dairy byproduct, namely cheese whey powder (CWP), was microbially converted into three low caloric sweeteners using whole-cell and fermentation technologies. Firstly, the simultaneous lactose hydrolysis and isomerization of lactose-derived D-galactose into D-tagatose was performed by an engineered Escherichia coli strain co-expressing β-galactosidase and L-arabinose isomerase, which eventually produced 68.35 g/L D-tagatose during sequential feeding of CWP. Subsequently, the mixed syrup containing lactose-derived D-glucose and residual D-galactose was subjected to fermentation by Metschnikowia pulcherrima E1, which produced 60.12 g/L D-arabitol and 28.26 g/L galactitol. The net titer of the three rare sugars was 156.73 g/L from 300 g/L lactose (equivalent to 428.57 g/L CWP), which was equivalent to 1.12 mol product/mol lactose and 52.24% conversion efficiency in terms of lactose.

Lactic Acid Bacteria as Biopreservation Against Spoilage Molds in Dairy Products - A Review

Mold spoilage of dairy products such as yogurt is a concern in dairy industry. Not only does it lead to substantial food waste, economic losses, and even brand image damage, but it may also cause public health concern due to the potential production of mycotoxin. Good hygiene practices are necessary to prevent contamination, but contamination may nevertheless occur at the production site and, not least, at the site of the consumer. In recent years, there has been a growing interest from consumers for "clean label" food products, which are natural, less-processed, and free of added, chemical preservatives, and a wish for shelf lives of considerable length in order to minimize food waste. This has sparked an interest in using lactic acid bacteria (LAB) or their metabolites as biopreservatives as a way to limit the growth of spoilage organisms in dairy products. A range of compounds produced by LAB with potential antifungal activity have been described as contributing factors to the inhibitory effect of LAB. More recently, growth inhibition effects caused by specific competitive exclusion have been elucidated. It has also become clear that the sensitivity toward both individual antifungal compounds and competition mechanisms differ among molds. In this review, the main spoilage molds encountered in dairy products are introduced, and an overview of the antifungal activity of LAB against different spoilage molds is presented including the main antifungal compounds derived from LAB cultures and the sensitivity of the spoilage molds observed toward these compounds. The recent findings of the role of competitive exclusion with emphasis on manganese depletion and the possible implications of this for biopreservation are described. Finally, some of the knowledge gaps, future challenges, and trends in the application of LAB biopreservation in dairy products are discussed.

A Review of the Recent Developments in the Bioproduction of Polylactic Acid and Its Precursors Optically Pure Lactic Acids

Lactic acid (LA) is an important organic acid with broad industrial applications. Considered as an environmentally friendly alternative to petroleum-based plastic with a wide range of applications, polylactic acid has generated a great deal of interest and therefore the demand for optically pure l- or d-lactic acid has increased accordingly. Microbial fermentation is the industrial route for LA production. LA bacteria and certain genetic engineering bacteria are widely used for LA production. Although some fungi, such as Saccharomyces cerevisiae, are not natural LA producers, they have recently received increased attention for LA production because of their acid tolerance. The main challenge for LA bioproduction is the high cost of substrates. The development of LA production from cost-effective biomasses is a potential solution to reduce the cost of LA production. This review examined and discussed recent progress in optically pure l-lactic acid and optically pure d-lactic acid fermentation. The utilization of inexpensive substrates is also focused on. Additionally, for PLA production, a complete biological process by one-step fermentation from renewable resources is also currently being developed by metabolically engineered bacteria. We also summarize the strategies and procedures for metabolically engineering microorganisms producing PLA. In addition, there exists some challenges to efficiently produce PLA, therefore strategies to overcome these challenges through metabolic engineering combined with enzyme engineering are also discussed.

Whey Utilization: Sustainable Uses and Environmental Approach

The dairy industry produces large amounts of whey as a by- or co-product, which has led to considerable environmental problems due to its high organic matter content. Over the past decades, possibilities of more environmentally and economically efficient whey utilisation have been studied, primarily to convert unwanted end products into a valuable raw material. Sustainable whey management is mostly oriented to biotechnological and food applications for the development of value-added products such as whey powders, whey proteins, functional food and beverages, edible films and coatings, lactic acid and other biochemicals, bioplastic, biofuels and similar valuable bioproducts. This paper provides an overview of the sustainable utilization of whey and its constituents, considering new refining approaches and integrated processes to convert whey, or lactose and whey proteins to high value-added whey-based products.

Lactic acid production using cheese whey based medium in a stirred tank reactor by a ccpA mutant of Lacticaseibacillus casei

In lactobacilli, CcpA is known to modulate the expression of genes involved in sugar metabolism, stress response and aerobic adaptation. This study aimed to evaluate a ccpA mutant of Lacticaseibacillus casei BL23 to increase lactic acid production using cheese whey. The ccpA derivative (BL71) showed better growth than the L. casei wild-type in the whey medium. In a stirred tank reactor, at 48 h, lactate production by BL71 was eightfold higher than that by BL23. In batch fermentations, the final values reached were 44.23 g L^-1 for BL71 and 27.58 g L^-1 for BL23. Due to a decrease in the delay of lactate production in the mutant, lactate productivity increased from 0.17 g (L.h)^-1 with BL23 to 0.80 g (L.h)^-1 with BL71. We found that CcpA would play additional roles in nitrogen metabolism by the regulation of the proteolytic system. BL71 displayed higher activity of the PepX, PepQ and PrtP enzymes than BL23. Analysis of prtP expression confirmed this deregulation in BL71. Promoter analysis of the prtP gene revealed CcpA binding sites with high identity to the cre consensus sequence and the interaction of CcpA with this promoter was confirmed in vitro. We postulate that deregulation of the proteolytic system in BL71 allows a better exploitation of nitrogen resources in cheese whey, resulting in enhanced fermentation capacity. Therefore, the ccpA gene could be a good target for future technological developments aimed at effective and inexpensive lactate production from dairy industrial wastes.

Evolutionary engineering of Lactobacillus bulgaricus reduces enzyme usage and enhances conversion of lignocellulosics to D-lactic acid by simultaneous saccharification and fermentation

BACKGROUND

Simultaneous saccharification and fermentation (SSF) of pre-treated lignocellulosics to biofuels and other platform chemicals has long been a promising alternative to separate hydrolysis and fermentation processes. However, the disparity between the optimum conditions (temperature, pH) for fermentation and enzyme hydrolysis leads to execution of the SSF process at sub-optimal conditions, which can affect the rate of hydrolysis and cellulose conversion. The fermentation conditions could be synchronized with hydrolysis optima by carrying out the SSF at a higher temperature, but this would require a thermo-tolerant organism. Economically viable production of platform chemicals from lignocellulosic biomass (LCB) has long been stymied because of the significantly higher cost of hydrolytic enzymes. The major objective of this work is to develop an SSF strategy for D-lactic acid (D-LA) production by a thermo-tolerant organism, in which the enzyme loading could significantly be reduced without compromising on the overall conversion.

RESULTS

A thermo-tolerant strain of Lactobacillus bulgaricus was developed by adaptive laboratory evolution (ALE) which enabled the SSF to be performed at 45 °C with reduced enzyme usage. Despite the reduction of enzyme loading from 15 Filter Paper Unit/g_LCB (FPU/g_LCB) to 5 FPU/g_LCB, we could still achieve ~ 8% higher cellulose to D-LA conversion in batch SSF, in comparison to the conversion by separate enzymatic hydrolysis and fermentation processes at 45 °C and pH 5.5. Extending the batch SSF to SSF with pulse-feeding of 5% pre-treated biomass and 5 FPU/g_LCB, at 12-h intervals (36th-96th h), resulted in a titer of 108 g/L D-LA and 60% conversion of cellulose to D-LA. This is one among the highest reported D-LA titers achieved from LCB.

CONCLUSIONS

We have demonstrated that the SSF strategy, in conjunction with evolutionary engineering, could drastically reduce enzyme requirement and be the way forward for economical production of platform chemicals from lignocellulosics. We have shown that fed-batch SSF processes, designed with multiple pulse-feedings of the pre-treated biomass and enzyme, can be an effective way of enhancing the product concentrations.

Co-Fermentation of Food Waste and Municipal Sludge from the Saudi Arabian Environment to Improve Lactic Acid Production by Lactobacillus rhamnosus AW3 Isolated from Date Processing Waste

Food waste and municipal sludge were used as the substrates for the biosynthesis of lactic acid in a batch fermentor. The probiotic bacterial strain Lactobacillus rhamnosus AW3 isolated from date processing waste was used to produce lactic acid in a batch fermentor. Co-fermentation enhanced the biosynthesis of lactic acid and decreased substrate inhibition more than mono-substrate fermentation. A maximum yield of 28.4 ± 0.87 g/L of lactic acid was obtained through co-fermentation of food waste and municipal sludge at an optimized ratio of 2:0.5. Lactic acid production was improved by the supplementation of fructose, peptone, and sodium dihydrogen phosphate at pH 5.5 after 48 h fermentation. This production was approximately three-fold higher than that during mono-fermentation of food waste. The tested bacterial strains were obtained from the Microbial Type Culture Collection (MTCC). Lactic acid showed potent antimicrobial activity against pathogenic organisms, such as Bacillus subtilis MTCC 5981 (14 mm), Staphylococcus aureus MTCC 737 (20 mm), Pseudomonas aeruginosa MTCC 424 (24 mm), Enterobacter aerogenes MTCC111 (19 mm), Escherichia coli MTCC 443 (18 mm), Penicillium chrysogenum MTCC 5108 (19 mm), and Aspergillus niger MTCC 282 (19 mm). The antimicrobial properties of lactic acid have significant potential to inhibit the growth of pathogenic bacteria and fungi and improve probiotic properties. The lactic acid extracted from L. rhamnosus AW3 decreased the pH value of soil (p < 0.01) and increased the availability of soil phosphorus (p < 0.01). These findings demonstrate the bioconversion of food waste and municipal sludge into lactic acid, and the recycling of food wastes in urban areas to enhance soil nutrients.

Efficient Conversion of Agroindustrial Waste into D(-) Lactic Acid by Lactobacillus delbrueckii Using Fed-Batch Fermentation

PURPOSE

The goal of this paper is to describe the green conversion of agricultural waste products, such as molasses and corn steep liquor, into large amounts of D(-) lactic acid using a facilitated multipulse fed-batch strategy and affordable pH neutralizer. This is a very low-cost process because there is no need for hydrolysis of the waste products. The fed-batch strategy increases lactic acid productivity by avoiding inhibition caused by a high initial substrate concentration, and the selected controlling agent prevents cell stress that could be caused by high osmotic pressure of the culture media.

METHODS

The effects of different carbon and nitrogen sources on lactic acid production were investigated, and the best concentrations of the medium components were determined. To optimize the culture conditions of the Lactobacillus delbrueckii strain, the effects of pH control, temperature, neutralizing agent, agitation, and inoculum size in batch cultures were investigated. Fed-batch strategies were also studied to improve production and productivity.

RESULT

A high titer of D(-) lactic acid (162g/liter) was achieved after 48 hours of fermentation. Productivity at this point was 3.37 g/L·h. The optimum conditions were a temperature of 39°C, pH 5.5 controlled by the addition of Ca(OH)2, agitation at 150 rpm, and inoculum size of 25% (v/v).

CONCLUSION

The production of high optical purity D(-) lactic acid through L. delbrueckii fermentation with molasses and corn steep liquor is a promising economical alternative process that can be performed on the industrial scale.

The dynamic development of bacterial community following long-term weathering of bauxite residue

Bauxite residue is the industrial waste generated from alumina production and commonly deposited in impoundments. These sites are bare of vegetation due to the extreme high salinity and alkalinity, as well as lack of nutrients. However, long term weathering processes could improve residue properties to support the plant establishment. Here we investigate the development of bacterial communities and the geochemical drivers in bauxite residue, using Illumina high-throughput sequencing technology. Long term weathering reduced the pH in bauxite residue and increased its nutrients content. The bacterial community also significantly developed during long term weathering processes. Taxonomic analysis revealed that natural weathering processes encouraged the populations of Proteobacteria, Chloroflexi, Acidobacteria and Planctomycetes, whereas reducing the populations of Firmicutes and Actinobacteria. Redundancy analysis (RDA) indicated that total organic carbon (TOC) was the dominant factors affecting microbial structure. The results have demonstrated that natural weathering processes improved the soil development on the abandoned bauxite residue disposal areas, which also increased our understanding of the correlation between microbial variation and residue properties during natural weathering processes in Bauxite residue disposal areas.