Design, application, and microbiome of sulfate-reducing bioreactors for treatment of mining-influenced water

A review of passive acid mine drainage treatment by PRB and LPB: From design, testing, to construction

An extensive volume of acid mine drainage (AMD) generated throughout the mining process has been widely regarded as one of the most catastrophic environmental problems. Surface water and groundwater impacted by pollution exhibit extreme low pH values and elevated sulfate and metal/metalloid concentrations, posing a serious threat to the production efficiency of enterprises, domestic water safety, and the ecological health of the basin. Over the recent years, a plethora of techniques has been developed to address the issue of AMD, encompassing nanofiltration membranes, lime neutralization, and carrier-microencapsulation. Nonetheless, these approaches often come with substantial financial implications and exhibit restricted long-term sustainability. Among the array of choices, the permeable reactive barrier (PRB) system emerges as a noteworthy passive remediation method for AMD. Distinguished by its modest construction expenses and enduring stability, this approach proves particularly well-suited for addressing the environmental challenges posed by abandoned mines. This study undertook a comprehensive evaluation of the PRB systems utilized in the remediation of AMD. Furthermore, it introduced the concept of low permeability barrier, derived from the realm of site-contaminated groundwater management. The strategies pertaining to the selection of materials, the physicochemical aspects influencing long-term efficacy, the intricacies of design and construction, as well as the challenges and prospects inherent in barrier technology, are elaborated upon in this discourse.

Harnessing Fermentation May Enhance the Performance of Biological Sulfate-Reducing Bioreactors

Biological sulfate reduction (BSR) represents a promising strategy for bioremediation of sulfate-rich waste streams, yet the impact of metabolic interactions on performance is largely unexplored. Here, genome-resolved metagenomics was used to characterize 17 microbial communities in reactors treating synthetic sulfate-contaminated solutions. Reactors were supplemented with lactate or acetate and a small amount of fermentable substrate. Of the 163 genomes representing all the abundant bacteria, 130 encode 321 NiFe and FeFe hydrogenases and all genomes of the 22 sulfate-reducing microorganisms (SRM) encode genes for H2 uptake. We observed lactate oxidation solely in the first packed bed reactor zone, with propionate and acetate oxidation in the middle and predominantly acetate oxidation in the effluent zone. The energetics of these reactions are very different, yet sulfate reduction kinetics were unaffected by the type of electron donor available. We hypothesize that the comparable rates, despite the typically slow growth of SRM on acetate, are a result of the consumption of H2 generated by fermentation. This is supported by the sustained performance of a predominantly acetate-supplemented stirred tank reactor dominated by diverse fermentative bacteria encoding FeFe hydrogenase genes and SRM capable of acetate and hydrogen consumption and CO2 assimilation. Thus, addition of fermentable substrates to stimulate syntrophic relationships may improve the performance of BSR reactors supplemented with inexpensive acetate.

Bioremediation of acid mine drainage using sulfate-reducing wetland bioreactor: Filling substrates influence, sulfide oxidation and microbial community

Two sulfate-reducing wetland bioreactors (SRB-1 filled with lignocellulosic wastes and SRB-2 with river sand) were applied for synthetic acid mine drainage treatment with bio-waste fermentation liquid as electron donor, and the influence of filling substrates on sulfate reduction, sulfur transformation and microbial community was studied. The presence of lignocellulosic wastes (mixture of cow manure, bark, sawdust, peanut shell and straw) in SRB-1 promoted sulfate reduction efficiency (68.9%), sulfate reduction rate (42.1 ± 11 mg S/(L·d)), dissolved sulfide production rate (27.4 ± 7 mg S/(L·d)), and particularly caused high conversion ratio of sulfate reduction into dissolved sulfide (66.4%). In comparison, the relatively low sulfate reduction efficiency (42.9%), sulfate reduction rate (27.0 ± 10 mg S/(L·d)), dissolved sulfide production rate (5.6 ± 3 mg S/(L·d)) and low dissolved sulfide conversion efficiency (21.2%) occurred in SRB-2. Mixed organic substrates including easily assimilated electron donors (in manure) and lignocellulosic matter were effective to promote quick start and long-term microbial sulfate reduction. More than 98% of produced dissolved sulfide was oxidized dominantly by photoautotrophic green sulfur bacteria (genera Chlorobium and Chlorobaculum), of which 64.6% and 54.5% was converted into elemental sulfur for SRB-1 and SRB-2. The oxidation of sulfide into elemental sulfur for potential recovery rather than sulfate is preferred. Diverse sulfate reducing bacteria and sulfide oxidizing bacteria co-existed in the treatment system, which led to a sustainable sulfur transformation. High metal removal efficiency for Fe (99.6%, 92.5%), Cd (99.9%, 99.9%), Zn (99.4%, 98.5%), Cu (94.5%, 94.6%) except for Mn (9.3%, 3.6%) was achieved, and effluent pH increased to 6.5-7.7 and 6.7-7.7 for SRB-1 and SRB-2, respectively. Microbial community was regulated by filling substrates. Synergism between lignocellulosic decomposing bacteria and sulfate reducing bacteria played a vital role in lignocellulosic bioreactor treating AMD, in addition to fermentation liquid serving as effective electron donor.

Insights into the effects of operating parameters on sulfate reduction performance and microbial pathways in the anaerobic sequencing batch reactor

Sulfate-reducing bacteria (SRB)-based anaerobic process has aroused wide concern in the treatment of sulfate-containing wastewater. Chemical oxygen demand-to-sulfate ratio (COD/SO42-) and HRT are two key factors that affect not only the anaerobic treatment performance but also the activity of SRB. In this study, an anaerobic sequencing batch reactor was constructed, and the effects of different operating parameters (COD/SO42-, HRT) on the relationship of sulfate (SO42-) reduction performance, microbial communities, and metabolic pathways were comprehensively investigated. The results indicated that the SO42- removal rates could achieve above 95% under different operating parameters. Bioinformatics analysis revealed that microbial community changed with reactor operation. At the genus level, the enrichment of Propionicclava and Peptoclostridium contributed to the establishment of a homotrophic relationship with Desulfobulbus, the dominant SRB in the reactor, which indicated that they took vital part in maintaining the structural and functional stability of the bacterial community under different operating parameters. In particular, an increasing trend of the relative abundance of functional genes encoding dissimilatory sulfate reduction was detected with the increase of COD/SO42-, which indicated high SO42- reduction potentials. This knowledge will help to reveal the mechanism of the effect of operating parameters on the anaerobic sulfate removal process, thus providing effective guidance for the targeted regulation of anaerobic sequencing batch bioreactors treating SO42--containing wastewater.

Extra benefit of microalgae in raw piggery wastewater treatment: pathogen reduction

BACKGROUND

Monitoring microbial communities especially focused on pathogens in newly developed wastewater treatment systems is recommended for public health. Thus, we investigated the microbial community shift in a pilot-scale microalgal treatment system for piggery wastewater.

RESULTS

Microalgae showed reasonable removal efficiencies for COD and ammonia, resulting in higher transparency of the final effluent. Metagenome and microbial diversity analyses showed that heterotrophic microalgal cultivation barely changed the bacterial community; however, the mixotrophic microalgal cultivation induced a sudden change. In addition, an evaluation of risk groups (RGs) of bacteria showed that raw piggery wastewater included abundant pathogens, and the microalgal treatment of the raw piggery wastewater decreased the RG2 pathogens by 63%. However, co-cultivation of microalgae and the most dominant RG2 pathogen, Oligella, showed no direct effects between them.

CONCLUSIONS

Thus, a microbial interaction network was constructed to elucidate algae-bacteria interrelationships, and the decrease in Oligella was indirectly connected with microalgal growth via Brevundimonas, Sphingopyxis, and Stenotrophomonas. In a validation test, 3 among 4 connecting bacterial strains exhibited inhibition zones against Oligella. Therefore, we showed that microalgal wastewater treatment causes a decrease in RG2 bacteria, which is an indirect impact of microalgae associated with bacteria. Video abstract.

Acid mine drainage treatment using zero-valent iron nanoparticles in biochemical passive reactors

Acid mine drainage (AMD) is the major effluent generated from metal and coal mines, causing serious ecological risks and degradation of aquatic habitats and surrounding soil quality. Biochemical passive reactors (BPRs) are an option for improving AMD affected water. This study investigates the effect of the size and concentration of zerovalent iron nanoparticles (nZVI) on the efficiency of batch BPRs during AMD remediation. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) were also used as complementary techniques for the investigation of the changes in microbial cells and nZVI properties after the AMD remediation. The results from the batch experiment showed that the concentration of nZVI increases the pH and decreases ORP during AMD treatment, thus favouring the removal of metals. The results also suggest that metal sulfide precipitation occurred in all the batch with reactive mixture but was greater in reactors amended with nZVI of larger size. This study revealed that the presence of nZVI in the BPR leads to metal removal as well as the inhibition of sulfate-reducing bacteria (SRB) activity. Microscopy study indicated that the addition of nZVI creates a morphological change on certain microorganisms in which the cellular membrane was fully covered with nZVI, inducing cell lysis process. These results show that nZVI is a promising reactive material for the treatment of AMD in BPR systems.

A Review on Microorganisms in Constructed Wetlands for Typical Pollutant Removal: Species, Function, and Diversity

Constructed wetlands (CWs) have been proven as a reliable alternative to traditional wastewater treatment technologies. Microorganisms in CWs, as an important component, play a key role in processes such as pollutant degradation and nutrient transformation. Therefore, an in-depth analysis of the community structure and diversity of microorganisms, especially for functional microorganisms, in CWs is important to understand its performance patterns and explore optimized strategies. With advances in molecular biotechnology, it is now possible to analyze and study microbial communities and species composition in complex environments. This review performed bibliometric analysis of microbial studies in CWs to evaluate research trends and identify the most studied pollutants. On this basis, the main functional microorganisms of CWs involved in the removal of these pollutants are summarized, and the effects of these pollutants on microbial diversity are investigated. The result showed that the main phylum involved in functional microorganisms in CWs include Proteobacteria, Bacteroidetes, Actinobacteria and Firmicutes. These functional microorganisms can remove pollutants from CWs by catalyzing chemical reactions, biodegradation, biosorption, and supporting plant growth, etc. Regarding microbial alpha diversity, heavy metals and high concentrations of nitrogen and phosphorus significantly reduce microbial richness and diversity, whereas antibiotics can cause large fluctuations in alpha diversity. Overall, this review can provide new ideas and directions for the research of microorganisms in CWs.

Continuous-mode acclimation and operation of lignocellulosic sulfate-reducing bioreactors for enhanced metal immobilization from acidic mining-influenced water

Lignocellulosic sulfate-reducing bioreactors are an inexpensive passive approach for treatment of mining-influenced water (MIW). Typically, microbial community acclimation to MIW involves bioreactor batch-mode operation to initiate lignocellulose hydrolysis and fermentation and provide electron donors for sulfate-reducing bacteria. However, batch-mode operation could significantly prolong bioreactor start-up times (up to several months) and select for slow-growing microorganisms. In this study we assessed the feasibility of bioreactor continuous-mode acclimation to MIW (pH 2.5, 6.5 mM SO₄^2-, 18 metal(loid)s) as an alternate start-up method. Results showed that bioreactors with spent brewing grains and sugarcane bagasse achieved acclimation in continuous mode at hydraulic retention times (HRTs) of 7-12-d within 16-22 days. During continuous-mode acclimation, extensive SO₄^2- reduction (80 ± 20% -91 ± 3%) and > 98% metal(loid) removal was observed. Operation at a 3-d HRT further yielded a metal(loid) removal of 97.5 ± 1.3 -98.8 ± 0.9% until the end of operation. Sulfate-reducing microorganisms were detected closer to the influent in the spent brewing grains bioreactors, and closer to the effluent in the sugarcane bagasse bioreactors, giving insight as to where SO₄^2- reduction was occurring. Results strongly support that a careful selection of lignocellulose and bioreactor operating parameters can bypass typical batch-mode acclimation, shortening bioreactor start-up times and promoting effective MIW metal(loid) immobilization and treatment.

Passive multi-unit field-pilot for acid mine drainage remediation: Performance and environmental assessment of post-treatment solid waste

This study evaluated the performance of a passive multi-unit field-pilot operating for 16 months to treat acid mine drainage (AMD) from a coal mine in Colombia Andean Paramo. The multi-unit field-pilot involved a combination of a pre-treatment unit (550 L) filled with dispersed alkaline substrate (DAS), and six passive biochemical reactors (PBRs; 220 L) under two configurations: open (PBRs-A) and closed (PBRs-B) to the atmosphere. The AMD quality was 1200 ± 91 mg L^-1 Fe, 38.0 ± 1.3 mg L^-1 Mn, 8.5 ± 1.6 mg L^-1 Zn, and 3200 ± 183.8 mg L^-1 SO₄^2-, at pH 2.8. The input and output effluents were monitored to establish AMD remediation. Physicochemical stability of the post-treatment solids, including metals (Fe²⁺, Zn²⁺, and Mn²⁺) and sulfates for environmental contamination from reactive mixture post-treatment, was also assessed. The passive multi-unit field-pilot achieved a total removal of 74% SO₄^2-, 63% Fe²⁺, and 48% Mn²⁺ with the line of PBRs-A, and 91% SO₄^2-, 80% Fe²⁺, and 66% Mn²⁺ with the line of PBRs-B, as well as 99% removal for Zn²⁺ without significant differences (p < 0.05) between the two lines. The study of the physicochemical stability of the post-treatment solids showed they can produce acidic leachates that could release large quantities of Fe and Mn, if they are disposed in oxidizing conditions; contact with water or any other leaching solutions must be avoided. Therefore, these post-treatment solids cannot be disposed of in a municipal landfill. The differences in configuration between PBRs, open or closed to the atmosphere, induced changes in the performance of the passive multi-unit field-pilot during AMD remediation.

Optimal start-up conditions for the efficient treatment of acid mine drainage using sulfate-reducing bioreactors based on physicochemical and microbiome analyses

Typically, sulfate-reducing bioreactors used to treat acid mine drainage (AMD) undergo an initial incubation period of a few weeks to acclimatize sulfate-reducing bacteria (SRB), although necessity of this preincubation has rarely been evaluated. To reduce time and economic cost, we developed an SRB acclimatization method using the continuous flow of AMD into bioreactors fed with rice bran, and compared with the conventional acclimatization method. We found that the SRB sufficiently acclimatized without the preincubation phase. Furthermore, we examined the performance and SRB communities in bioreactors operated for >200 days under seven different conditions, in which the amount of rice bran added and hydraulic retention times (HRTs) were varied. A comparison of the various bioreactor conditions revealed that the lowest rice bran amount (50 g) and the shortest HRT (6 h) caused a deterioration in reactor performance after day 144 and 229, respectively. In both cases, relatively aerobic environments developed due to the lack of organic matter seemed to inhibit sulfate reduction. Of the conditions tested, operation of the bioreactors with 200 g of rice bran and an HRT of 12.5 h was the most effective in treating AMD, showing a sulfate reduction rate of 20.7-77.9% during days 54-242. DATA AND MATERIALS AVAILABILITY: All data needed to evaluate the conclusions of this study are presented in the paper and/or the appendix.

Acetotrophic sulfate-reducing consortia develop active biofilms on zeolite and glass beads in batch cultures at initial pH 3

Sulfate-reducing microbial communities remain a suitable option for the remediation of acid mine drainage using several types of carrier materials and appropriate reactor configurations. However, acetate prevails as a product derived from the incomplete oxidation of most organic substrates by sulfate reducers, limiting the efficiency of the whole process. An established sulfate-reducing consortium, able to degrade acetate at initial acidic pH (3.0), was used to develop biofilms over granular activated carbon (GAC), glass beads, and zeolite as carrier materials. In batch assays using glycerol, biofilms successfully formed on zeolite, glass beads, and GAC with sulfide production rates of 0.32, 0.26, and 0.14 mmol H₂S/L·d, respectively, but only with glass beads and zeolite, acetate was degraded completely. The planktonic and biofilm communities were determined by the 16S rRNA gene analysis to evaluate the microbial selectivity of the carrier materials. In total, 46 OTUs (family level) composed the microbial communities. Ruminococcaceae and Clostridiaceae families were present in zeolite and glass beads, whereas Peptococcaceae was mostly enriched on zeolite and Desulfovibrionaceae on glass beads. The most abundant sulfate reducer in the biofilm of zeolite was Desulfotomaculum sp., while Desulfatirhabdium sp. abounded in the planktonic community. With glass beads, Desulfovibrio sp. dominated the biofilm and the planktonic communities. Our results indicate that both materials (glass beads and zeolite) selected different key sulfate-reducing microorganisms able to oxidize glycerol completely at initial acidic pH, which is relevant for a future application of the consortium in continuous bioreactors to treat acidic streams. KEY POINTS: • Complete consumption of glycerol and acetate at acidic pH by sulfate reduction. • Glass beads and zeolite are suitable materials to form sulfate-reducing biofilms. • Acetotrophic sulfate-reducing bacteria attached to zeolite preferably.