Origins and features of pectate lyases and their applications in industry

Targeted metabolite profiling of Salvia rosmarinus Italian local ecotypes and cultivars and inhibitory activity against Pectobacterium carotovorum subsp. carotovorum

Introduction

The development of agriculture in terms of sustainability and low environmental impact is, at present, a great challenge, mainly in underdeveloped and marginal geographical areas. The Salvia rosmarinus "Eretto Liguria" ecotype is widespread in Liguria (Northwest Italy), and farmers commonly use it by for cuttings and for marketing. In the present study, this ecotype was characterized in comparison with other cultivars from the same geographical region and Campania (Southern Italy), with a view to application and registration processes for the designation of protected geographical indications. Moreover, the possibility of using the resulting biomass after removing cuttings or fronds as a source of extracts and pure compounds to be used as phytosanitary products in organic farming was evaluated. Specifically, the potential of rosemary extracts and pure compounds to prevent soft rot damage was then tested.

Methods

A targeted NMR metabolomic approach was employed, followed by multivariate analysis, to characterize the rosemary accessions. Bacterial soft rot assay and disk diffusion test were carried out to evaluate the activity of extracts and isolated compounds against Pectobacterium carotovorum subsp. carotovorum. Enzymatic assay was performed to measure the in vitro inhibition of the pectinase activity produced by the selected pathogen. Molecular docking simulations were used to explore the possible interaction of the selected compounds with the pectinase enzymes.

Results and Discussion

The targeted metabolomic analysis highlighted those different geographical locations can influence the composition and abundance of bioactive metabolites in rosemary extracts. At the same time, genetic factors are important when a single geographical area is considered. Self-organizing maps (SOMs) showed that the accessions of "Eretto Liguria" appeared well characterized when compared to the others and had a good content in specialized metabolites, particularly carnosic acid. Soft rotting Enterobacteriaceae belonging to the Pectobacterium genus represent a serious problem in potato culture. Even though rosemary methanolic extracts showed a low antibacterial activity against a strain of Pectobacterium carotovorum subsp. carotovorum in the disk diffusion test, they showed ability in reducing the soft rot damage induced by the bacterium on potato tissue. 7-O-methylrosmanol, carnosol and isorosmanol appeared to be the most active components. In silico studies indicated that these abietane diterpenoids may interact with P. carotovorum subsp. carotovorum pectate lyase 1 and endo-polygalacturonase, thus highlighting these rosemary components as starting points for the development of agents able to prevent soft rot progression.

A plant cell death-inducing protein from litchi interacts with Peronophythora litchii pectate lyase and enhances plant resistance

Cell wall degrading enzymes, including pectate lyases (PeLs), released by plant pathogens, break down protective barriers and/or activate host immunity. The direct interactions between PeLs and plant immune-related proteins remain unclear. We identify two PeLs, PlPeL1 and PlPeL1-like, critical for full virulence of Peronophythora litchii on litchi (Litchi chinensis). These proteins enhance plant susceptibility to oomycete pathogens in a PeL enzymatic activity-dependent manner. However, LcPIP1, a plant immune regulator secreted by litchi, binds to PlPeL1/PlPeL1-like, and attenuates PlPeL1/PlPeL1-like induced plant susceptibility to Phytophthora capsici. LcPIP1 also induces cell death and various immune responses in Nicotiana benthamiana. Conserved in plants, LcPIP1 homologs bear a conserved "VDMASG" motif and exhibit immunity-inducing activity. Furthermore, SERK3 interacts with LcPIP1 and is required for LcPIP1-induced cell death. NbPIP1 participates in immune responses triggered by the PAMP protein INF1. In summary, our study reveals the dual roles of PlPeL1/PlPeL1-like in plant-pathogen interactions: enhancing pathogen virulence through PeL enzymatic activity while also being targeted by LcPIP1, thus enhancing plant immunity.

An overview of microbial enzymatic approaches for pectin degradation

Pectin, a complex natural macromolecule present in primary cell walls, exhibits high structural diversity. Pectin is composed of a main chain, which contains a high amount of partly methyl-esterified galacturonic acid (GalA), and numerous types of side chains that contain almost 17 different monosaccharides and over 20 different linkages. Due to this peculiar structure, pectin exhibits special physicochemical properties and a variety of bioactivities. For example, pectin exhibits strong bioactivity only in a low molecular weight range. Many different degrading enzymes, including hydrolases, lyases and esterases, are needed to depolymerize pectin due to its structural complexity. Pectin degradation involves polygalacturonases/rhamnogalacturonases and pectate/pectin lyases, which attack the linkages in the backbone via hydrolytic and β-elimination modes, respectively. Pectin methyl/acetyl esterases involved in the de-esterification of pectin also play crucial roles. Many α-L-rhamnohydrolases, unsaturated rhamnogalacturonyl hydrolases, arabinanases and galactanases also contribute to heterogeneous pectin degradation. Although numerous microbial pectin-degrading enzymes have been described, the mechanisms involved in the coordinated degradation of pectin through these enzymes remain unclear. In recent years, the degradation of pectin by Bacteroides has received increasing attention, as Bacteroides species contain a unique genetic structure, polysaccharide utilization loci (PULs). The specific PULs of pectin degradation in Bacteroides species are a new field to study pectin metabolism in gut microbiota. This paper reviews the scientific information available on pectin structural characteristics, pectin-degrading enzymes, and PULs for the specific degradation of pectin.

Improvement of optimum pH and specific activity of pectate lyase from Bacillus RN.1 using loop replacement

Background: Alkaline pectate lyase plays an important role in papermaking, biological refining and wastewater treatment, but its industrial applications are largely limited owing to its low activity and poor alkali resistance. Methods: The alkaline pectate lyase BspPel from Bacillus RN.1 was heterologously expressed in Escherichia coli BL21 (DE3) and its activity and alkali resistance were improved by loop replacement. Simultaneously, the effect of R260 on enzyme alkaline tolerance was also explored. Results: Recombinant pectate lyase (BspPel-th) showed the highest activity at 60°C and pH 11.0, and showed significant stability over a wide pH range (3.0-11.0). The specific enzyme activity after purification was 139.4 U/mg, which was 4.4 times higher than that of the wild-type enzyme. BspPel-th has good affinity for apple pectin, since the V _max and K _m were 29 μmol/min. mL and 0.46 mol/L, respectively. Molecular dynamics simulation results showed that the flexibility of the loop region of BspPel-th was improved. Conclusion: The modified BspPel-th has considerable potential for industrial applications with high pH processes.

Eco-friendly scouring of cotton knit fabrics with enzyme and soapnut: An alternative to conventional NaOH and synthetic surfactant based scouring

Eye-catching, aesthetic fashions often suppress its untold dark story of unsustainable processing including hazardous wet treatment. Considering the risks imposed by conventional cotton scouring and following the trend of scouring with enzymes, this study was undertaken to evaluate the bioscouring of cotton knit fabric involving saponin-enriched soapnut as a natural surfactant, applied from a bath requiring a few chemicals and gentle processing conditions, contributing to the eco-friendliness. The proposed application was compared to synthetic detergent engaged enzymatic scouring as well as the classic scouring with Sodium hydroxide. A cellulolytic pectate lyase enzyme (0.5%-0.8% o.w.f) was applied at 55 °C for 60 min at pH 5-5.5 with varying surfactant concentrations. A low concentration of soapnut extract (1 g/L to 2 g/L) was found sufficient to assist in the removal of non-cellulosic impurities from the cotton fabric after bioscouring with 0.5% o.w.f. enzyme, leading to good hydrophilicity indicated by an average wetting time of 4.86 s at the expense of 3.1%-3.8% weight loss. The scoured fabrics were further dyed with 1% o.w.f. reactive dye to observe the dyeing performance. The treated samples were characterized in terms of weight loss, wettability, bursting strength, whiteness index, and color value. The proposed application confronted level dyeing and the ratings for color fastness to washing and rubbing were 4-5 for all of the samples scoured enzymatically with soapnut. The study was also statistically analyzed and concluded.

The specificity of pectate lyase VdPelB from Verticilium dahliae is highlighted by structural, dynamical and biochemical characterizations

Pectins, complex polysaccharides and major components of the plant primary cell wall, can be degraded by pectate lyases (PLs). PLs cleave glycosidic bonds of homogalacturonans (HG), the main pectic domain, by β-elimination, releasing unsaturated oligogalacturonides (OGs). To understand the catalytic mechanism and structure/function of these enzymes, we characterized VdPelB from Verticillium dahliae. We first solved the crystal structure of VdPelB at 1.2 Å resolution showing that it is a right-handed parallel β-helix structure. Molecular dynamics (MD) simulations further highlighted the dynamics of the enzyme in complex with substrates that vary in their degree of methylesterification, identifying amino acids involved in substrate binding and cleavage of non-methylesterified pectins. We then biochemically characterized wild type and mutated forms of VdPelB. Pectate lyase VdPelB was most active on non-methylesterified pectins, at pH 8.0 in presence of Ca²⁺ ions. The VdPelB-G125R mutant was most active at pH 9.0 and showed higher relative activity compared to native enzyme. The OGs released by VdPelB differed to that of previously characterized PLs, showing its peculiar specificity in relation to its structure. OGs released from Verticillium-partially tolerant and sensitive flax cultivars differed which could facilitate the identification VdPelB-mediated elicitors of defence responses.

Cloning, expression, and characterization of two pectate lyases isolated from the sheep rumen microbiome

Pectate lyases (Pels) have a vital function in degradation of the primary plant cell wall and the middle lamella and have been widely used in the industry. In this study, two pectate lyase genes, IDSPel16 and IDSPel17, were cloned from a sheep rumen microbiome. The recombinant enzymes were expressed in Escherichia coli and functionally characterized. Both IDSPel16 and IDSPel17 proteins had an optimal temperature of 60 ℃, and an optimal pH of 10.0. IDSPel16 was relatively stable below 60 °C, maintaining 77.51% residual activity after preincubation at 60 °C for 1 h, whereas IDSPel17 denatured rapidly at 60 °C. IDSPel16 was relatively stable between pH 6.0 and 12.0, after pretreatment for 1 h, retaining over 60% residual activity. IDSPel16 had high activity towards polygalacturonic acid, with a V_max of 942.90 ± 68.11, whereas IDSPel17 had a V_max of only 28.19 ± 2.23 μmol/min/mg. Reaction product analyses revealed that IDSPel17 liberated unsaturated digalacturonate (uG₂) and unsaturated trigalacturonate (uG₃) from the substrate, indicating a typical endo-acting pectate lyase (EC 4.2.2.2). In contrast, IDSPel16 initially generated unsaturated oligogalacturonic acids, then converted these intermediates into uG₂ and unsaturated galacturonic acid (uG₁) as end products, a unique depolymerization profile among Pels. To the best of our knowledge, the IDSPel16 discovered with both endo-Pel (EC 4.2.2.2) and exo-Pel (EC 4.2.2.9) activities. These two pectate lyases, particularly the relatively thermo- and pH-stable IDSPel16, will be of interest for potential application in the textile, food, and feed industries. KEY POINTS: • Two novel pectate lyase genes, IDSPel16 and IDSPel17, were isolated and characterized from the sheep rumen microbiome. • Both IDSPel16 and IDSPel17 are alkaline pectate lyases, releasing unsaturated digalacturonate and unsaturated trigalacturonate from polygalacturonic acid. • IDSPel16, a bifunctional pectate lyase with endo-Pel (EC 4.2.2.2) and exo-Pel (EC 4.2.2.9) activities, could be a potential candidate for industrial application.

Structure of an Alkaline Pectate Lyase and Rational Engineering with Improved Thermo-Alkaline Stability for Efficient Ramie Degumming

Alkaline pectate lyases have biotechnological applications in plant fiber processing, such as ramie degumming. Previously, we characterized an alkaline pectate lyase from Bacillus clausii S10, named BacPelA, which showed potential for enzymatic ramie degumming because of its high cleavage activity toward methylated pectins in alkaline conditions. However, BacPelA displayed poor thermo-alkaline stability. Here, we report the 1.78 Å resolution crystal structure of BacPelA in apo form. The enzyme has the characteristic right-handed β-helix fold of members of the polysaccharide lyase 1 family and shows overall structural similarity to them, but it displays some differences in the details of the secondary structure and Ca²⁺-binding site. On the basis of the structure, 10 sites located in flexible regions and showing high B-factor and positive ΔT_m values were selected for mutation, aiming to improve the thermo-alkaline stability of the enzyme. Following site-directed saturation mutagenesis and screening, mutants A238C, R150G, and R216H showed an increase in the T₅₀¹⁵ value at pH 10.0 of 3.0 °C, 6.5 °C, and 7.0 °C, respectively, compared with the wild-type enzyme, interestingly accompanied by a 24.5%, 46.6%, and 61.9% increase in activity. The combined mutant R150G/R216H/A238C showed an 8.5 °C increase in the T₅₀¹⁵ value at pH 10.0, and an 86.1% increase in the specific activity at 60 °C, with approximately doubled catalytic efficiency, compared with the wild-type enzyme. Moreover, this mutant retained 86.2% activity after incubation in ramie degumming conditions (4 h, 60 °C, pH 10.0), compared with only 3.4% for wild-type BacPelA. The combined mutant increased the weight loss of ramie fibers in degumming by 30.2% compared with wild-type BacPelA. This work provides a thermo-alkaline stable, highly active pectate lyase with great potential for application in the textile industry, and also illustrates an effective strategy for rational design and improvement of pectate lyases.

Improvement on Thermostability of Pectate Lyase and Its Potential Application to Ramie Degumming

In order to obtain a thermostable pectate lyase for ramie degumming, a rational design based on structural analysis was carried out on a novel pectate lyase (Pel419) derived from the Dickeya Dadantii DCE-01 for high-efficiency ramie degumming. A total of five potential amino acid sites were chosen to replace residues. Then, the mutant enzymes were subjected to the heterologous expressions in Escherichia coli and their enzymatic characteristics were determined. The optimal reaction temperature for the five mutants kept consistent with that for the wild type. The enzyme activity and thermal stability of mutant V52A were significantly improved. Meanwhile, the weight loss rate obtained by V52A with the best enzymatic characteristics in the ramie degumming process at 50 °C is comparable with that obtained by commercial cotton-ramie processing pectinases, indicating that V52A was a potential industrial enzyme that could be applied to large-scale ramie degumming. In this study, the biological functions of conservative residues of Pel419 were preliminarily explored. The mutant V52A with both enzymatic activity and improved heat resistance was acquired, providing a superior material for developing enzyme preparations of ramie degumming, and rendering an effective method for the rational design aiming to improve the thermostability of pectate lyase.

Biochemical Characterization of Two Rhamnogalacturonan Lyases From Bacteroides ovatus ATCC 8483 With Preference for RG-I Substrates

Rhamnogalacturonan lyase (RGL) cleaves backbone α-1,4 glycosidic bonds between L-rhamnose and D-galacturonic acid residues in type I rhamnogalacturonan (RG-I) by β-elimination to generate RG oligosaccharides with various degrees of polymerization. Here, we cloned, expressed, purified and biochemically characterized two RGLs (Bo3128 and Bo4416) in the PL11 family from Bacteroides ovatus ATCC 8483. Bo3128 and Bo4416 displayed maximal activity at pH 9.5 and pH 6.5, respectively. Whereas the activity of Bo3128 could be increased 1.5 fold in the presence of 5 mM Ca²⁺, Bo4416 required divalent metal ions to show any enzymatic activity. Both of RGLs showed a substrate preference for RG-I compared to other pectin domains. Bo4416 and Bo3128 primarily yielded unsaturated RG oligosaccharides, with Bo3128 also producing them with short side chains, with yields of 32.4 and 62.4%, respectively. Characterization of both RGLs contribute to the preparation of rhamnogalacturonan oligosaccharides, as well as for the analysis of the fine structure of RG-I pectins.

Elucidating the degradation pattern of a new cold-tolerant pectate lyase used for efficient preparation of pectin oligosaccharides

The cold-active pectate lyases have drawn increasing attention in food and biotechnological applications due to their ability to retain high catalytic efficiency under lower temperatures, which could be helpful for energy saving, cost reduction and flavor preservation. Herein, a new cold-tolerant pectate lyase (ErPelPL1) gene from Echinicola rosea was cloned and heterologously expressed in Escherichia coli. Interestingly, ErPelPL1 retained high catalytic activity even at a low temperature (4 °C). ErPelPL1 exhibited optimal activity at 35 ℃, pH 8.0 with 1 mM of Ca2+. It showed high specific activity towards polygalacturonic acid (34.7 U/mg) and sodium polygalacturonate (59.3 U/mg). The combined thin-layer chromatography (TLC), fast protein liquid chromatography (FPLC) and electrospray ionization mass spectrometry (ESI-MS) results indicated that ErPelPL1 endolytically degraded pectic substances into the oligosaccharides with degrees of depolymerization (Dps) of 1-6. In conclusion, this study mainly conducted biochemical characterization and product analysis of a cold-tolerant pectate lyase. Therefore, it provides a promising enzyme candidate for food and biotechnological applications.

Pectinolytic lyases: a comprehensive review of sources, category, property, structure, and catalytic mechanism of pectate lyases and pectin lyases

Pectate lyases and pectin lyases have essential roles in various biotechnological applications, such as textile industry, paper making, pectic wastewater pretreatment, juice clarification and oil extraction. They can effectively cleave the α-1,4-glycosidic bond of pectin molecules back bone by β-elimination reaction to produce pectin oligosaccharides. In this way, it will not generate highly toxic methanol and has the advantages of good enzymatic selectivity, less by-products, mild reaction conditions and high efficiency. However, numerous researches have been done for several decades; there are still no comprehensive reviews to summarize the recent advances of pectate lyases and pectin lyases. This review tries to fill this gap by providing all relevant information, including the substrate, origin, biochemical properties, sequence analysis, mode of action, the three-dimensional structure and catalytic mechanism.