Biodegradation of diisononyl phthalate by a consortium of saline soil bacteria: optimisation and kinetic characterisation

Unraveling the levels of emerging contaminants along the eastern Mediterranean Sea

The Eastern Mediterranean Sea, rich in environmental and cultural heritage, faces increasing threats from emerging contaminants like toxic metals and phthalates. This study evaluates their occurrence across 40 Lebanese Mediterranean coastal hotspots using advanced techniques such as Inductively Coupled Plasma Mass Spectrometry (ICP-MS), X-ray Fluorescence Spectroscopy (XRF) and Gas Chromatography-Mass Spectrometry (GC-MS). Widespread contamination was detected in both water and sediments near landfills, sewage discharges, and industrial areas. Metal concentrations varied, with chromium (Cr) reaching 20.3 µg/L, arsenic (As) 12.1 µg/L, and lead (Pb) 30.6 µg/L, indicating pollution from urban and industrial activities. Manganese (Mn) and zinc (Zn) were within safe limits, while selenium (Se) and arsenic posed ecological risks. Among 13 phthalates, diethylhexyl phthalate (DEHP) was the most prevalent, ranging from 15.57 to 72.88 µg/L. Sediments showed elevated calcium, strontium, and barium levels, exceeding safety thresholds. Statistical analysis revealed correlations between contaminants and spatial variability driven by industrial, agricultural, and urban activities. These findings highlight the need for proper regulations and routine monitoring to protect marine ecosystems and public health.

Phthalates in the environment of China: A scoping review of distribution, anthropogenic impact, and degradation based on meta-analysis

Phthalates (PAEs) are a group of endocrine-disrupting environmental chemicals (EEDs) that pose significant risks to human health. PAEs are widespread in various environmental media, including air, dust, water, and soil, and are subject to both horizontal and vertical migration. Human activities significantly influence the distribution of PAEs, yet current research on this relationship remains limited. In this study, we first describe the hot issues of PAEs in the environment through bibliometrics, and then review published related studies. We outline the global distribution of PAEs in different media and conducted a comparative analysis of their composition. Principal component analysis (PCA) revealed PAEs differences in environmental mediums and geographic locations. Correlation analysis between PAEs composition and human activities in China further demonstrated that PAE concentrations were closely linked to agricultural and industrial activities. We also discussed the biodegradation and abiotic degradation of PAEs, finding that bacteria play a crucial role in their degradation in soil. This study aims to assess the distribution, transfer, impact, and degradation of PAEs, providing insights for the prevention and remediation of PAE pollution.

Biodegradation of plasticizers by novel strains of bacteria isolated from plastic waste near Juhu Beach, Mumbai, India

Phthalic acid esters are pivotal plasticizers in various applications, including cosmetics, packaging materials, and medical devices. They have garnered significant attention from the scientific community due to their persistence in ecosystems. The multifaceted aspects of PAEs, encompassing leaching, transformation, and toxicity, underscore their prominence as primary components of anthropogenic waste. In this study, we conducted an extensive investigation to isolate and evaluate bacterial strains with the potential to degrade plasticizers from soil samples collected at JUHU Beach, Mumbai. The degradation capabilities of the isolates were meticulously assessed, and their characterization was performed using established microbiological protocols followed by Sanger dideoxy 16S rRNA sequencing. Four isolates demonstrating notable plasticizer degradation proficiency were subjected to in-depth examinations of their growth dynamics and tolerance thresholds. The biodegradation capabilities of these isolates were evaluated under varying pH, temperature, and plasticizer concentrations. Optimization of degradation rates was achieved through a central composite design experiment. Phenotypic characterization of the isolates was conducted through phylogenetic analysis. The isolates were identified as novel strains belonging to Brevibacillus brevis, Acinetobacter baumannii, Moraxella sp., and Halomonas sp. respectively. The novel isolates were submitted to GenBank with accession numbers OP984197, OQ690115, PP174910, and PP177540 respectively.

Whole-cell biocatalysis for phthalate esters biodegradation in wastewater by a saline soil bacteria SSB-consortium

Phthalic acid esters (PAE) are widely used as plasticizers and have been classified as ubiquitous environmental contaminants of primary concern. PAE have accumulated intensively in surface water, groundwater, and wastewaters; thus, PAE degradation is essential. In the present study, the ability of a saline soil bacteria (SSB)-consortium to degrade synthetic wastewater-phthalates with alkyl chains of different lengths, such as diethyl phthalate (DEP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), and di (2-ethylhexyl) phthalate (DEHP) was characterized. A central composite design-response surface methodology was applied to optimize the degradation of each phthalate, where the independent variables were temperature (21-41 °C), pH (5.3-8.6) and PAE concentration (79.5-920.4 mg L-1), and Gas Chromatography-Mass Spectrometry was used to identify the metabolites generated during phthalate degradation. Optimal conditions were 31 °C, pH 7.0, and an initial PAE concentration of 500 mg L-1, where the SSB-consortium removed 84.9%, 98.47%, 99.09% and 98.25% of initial DEP, DBP, BBP, and DEHP, respectively, in 168h. A first-order kinetic model explained - the biodegradation progression, while the half-life of PAE degradation ranged from 12.8 to 29.8 h. Genera distribution of the SSB-consortium was determined by bacterial meta-taxonomic analysis. Serratia, Methylobacillus, Acrhomobacter, and Pseudomonas were the predominant genera; however, the type of phthalate directly affected their distribution. Scanning electron microscopy analysis showed that high concentrations (1000 mg L-1) of phthalates induced morphological alterations in the bacterial SSB-consortium. The metabolite profiling showed that DEP, DBP, BBP, and DEHP could be fully metabolized through the de-esterification and β-oxidation pathways. Therefore, the SSB-consortium can be considered a potential candidate for bioremediation of complex phthalate-contaminated water resources.

Construction of Metal-Organic Framework-Based Heterogeneous Pepsin and Its Degradation Performance and Mechanism for Phthalic Acid Esters

Biological enzyme-driven degradation of environmental pollutants has attracted widespread attention because it is ecofriendly and highly efficient. Immobilized enzyme technology has emerged as a promising technique in enzymology that addresses the limitations associated with free enzymes. Traditional solid-loaded enzyme substrates are often affected by blockages and restricted substrate accessibility. In this study, we synthesized an efficient heterogeneous pepsin catalyst, named PEP@M-MIL100(Fe), by covalently combining carboxylated ferrite structural expanded metal-organic frameworks with pepsin. This catalyst demonstrated excellent environmental adaptability and remarkable catalytic degradation capabilities. Notably, it rapidly degraded the persistent microplastic pollutant diisononyl phthalate (DINP) within just 150 min, with a removal efficiency of up to 95.88%. Impressively, even after 10 consecutive uses, the catalyst maintained its high performance. We proposed an innovative steady-state heterogeneous enzyme-catalyzed degradation mechanism, i.e., diffusion (D)-absorption (A)-binding (B)-reaction (R)-degradation (D)-link mechanism, which emphasizes the influence of substrate diffusion rates in this process. This work presents the first successful application of pepsin to DINP degradation and offers a sustainable and effective approach for addressing contemporary pollution challenges.

Enhanced degradation of phthalate esters (PAEs) by biochar-sodium alginate immobilised Rhodococcus sp. KLW-1

In this study, a new strain of bacteria, named Rhodococcus sp. KLW-1, was isolated from farmland soil contaminated by plastic mulch for more than 30 years. To improve the application performance of free bacteria and find more ways to use waste biochar, KLW-1 was immobilised on waste biochar by sodium alginate embedding method to prepare immobilised pellet. Response Surface Method (RSM) predicted that under optimal conditions (3% sodium alginate, 2% biochar and 4% CaCl2), di (2-ethylhexyl) phthalate (DEHP) degradation efficiency of 90.48% can be achieved. Under the adverse environmental conditions of pH 5 and 9, immobilisation increased the degradation efficiency of 100 mg/L DEHP by 16.42% and 11.48% respectively, and under the high-stress condition of 500 mg/L DEHP concentration, immobilisation increased the degradation efficiency from 71.52% to 91.56%, making the immobilised pellets have strong stability and impact load resistance to environmental stress. In addition, immobilisation also enhanced the degradation efficiency of several phthalate esters (PAEs) widely existing in the environment. After four cycles of utilisation, the immobilised particles maintained stable degradation efficiency for different PAEs. Therefore, immobilised pellets have great application potential for the remediation of the actual environment.

Plastics and the Sustainable Development Goals: From waste to wealth with microbial recycling and upcycling

Plastics pollution has become one of the greatest concerns of the 21st century. To date, around 10 billion tons of plastics have been produced almost exclusively from non-renewable sources, and of these, <10% have been recycled. The majority of discarded plastic waste (>70%) is accumulating in landfills or the environment, causing severe impacts to natural ecosystems and human health. Considering how plastics are present in every aspect of our daily lives, it is evident that a transition towards a Circular Economy of plastics is essential to achieve several of the Sustainable Development Goals. In this editorial, we highlight how microbial biotechnology can contribute to this shift, with a special focus on the biological recycling of conventional plastics and the upcycling of plastic-waste feedstocks into new value-added products. Although important hurdles will need to be overcome in this endeavour, recent success stories highlight how interdisciplinary approaches can bring us closer to a bio-based economy for the sustainable management of plastics.

Comparative analysis of diisononyl phthalate and di(isononyl)cyclohexane-1,2 dicarboxylate plasticizers in regulation of lipid metabolism in 3T3-L1 cells

Diisononyl phthalate (DINP) and di(isononyl)cyclohexane-1,2-dicarboxylate (DINCH) are plasticizers introduced to replace previously used phthalate plasticizers in polymeric products. Exposure to DINP and DINCH has been shown to impact lipid metabolism. However, there are limited studies that address the mechanisms of toxicity of these two plasticizers. Here, a comparative toxicity analysis has been performed to evaluate the impacts of DINP and DINCH on 3T3-L1 cells. The preadipocyte 3T3-L1 cells were exposed to 1, 10, and 100 μM of DINP or DINCH for 10 days and assessed for lipid accumulation, gene expression, and protein analysis. Lipid staining showed that higher concentrations of DINP and DINCH can induce adipogenesis. The gene expression analysis demonstrated that both DINP and DINCH could alter the expression of lipid-related genes involved in adipogenesis. DINP and DINCH upregulated Pparγ, Pparα, C/EBPα Fabp4, and Fabp5, while both compounds significantly downregulated Fasn and Gata2. Protein analysis showed that both DINP and DINCH repressed the expression of FASN. Additionally, we analyzed an independent transcriptome dataset encompassing temporal data on lipid differentiation within 3T3-L1 cells. Subsequently, we derived a gene set that accurately portrays significant pathways involved in lipid differentiation, which we subsequently subjected to experimental validation through quantitative polymerase chain reaction. In addition, we extended our analysis to encompass a thorough assessment of the expression profiles of this identical gene set across 40 discrete transcriptome datasets that have linked to diverse pathological conditions to foreseen any potential association with DINP and DINCH exposure. Comparative analysis indicated that DINP could be more effective in regulating lipid metabolism.

Tracing of Di-Ethylhexyl Phthalate in the Tequila Production Process

The purpose of this study was to determine the origin, presence, and fate of the endocrine disruptor di-ethylhexil phthalate (DEHP) during tequila production. For this, three tequila factories (small, medium, and large) were monitored. DEHP concentrations in water, agave, additives, lubricating greases, neoprene seals, and materials of each stage process were analyzed using gas chromatography/mass spectrometry. DEHP mass balances were performed to identify the processes with significant changes in the inputs/outputs. DEHP was detected in agave at up to 0.08 ± 0.03 mg kg-1, water 0.02 ± 0.01 mg kg-1, lubricant greases 131.05 ± 2.80 mg kg-1, and neoprene seals 369.11 ± 22.52 mg kg-1. Whereas, tequila produced in the large, medium, and small factories contained 0.05 ± 0.01, 0.24 ± 0.04, and 1.43 ± 0.48 mg kg-1 DEHP, respectively. Furthermore, in waste materials (vinasses and bagasse) released, 534.26 ± 349.02, 947.18 ± 65.84, and 5222.60 ± 2836.94 mg of DEHP was detected for every 1000 L of tequila produced. The most significant increase in DEHP occurred during the sugar extraction and distillation stages. Results demonstrate that main raw materials, such as agave and water, contain DEHP, but lubricant greases and neoprene seals are the major sources of DEHP contamination. Identification of the contamination sources can help the tequila industry to take actions to reduce it, protect consumer health and the environment, and prevent circular contamination.

Advanced degradation of refractory organic compounds in electroplating wastewater by an in-situ electro-catalytic biological coupling reactor: Removal performance, microbial community and possible mechanism

A high-efficiency treatment system for advanced degradation of refractory organic compounds such as saccharin sodium (SS) and polyethylene glycol 6000 (PEG 6000) in electroplating wastewater was proposed, which coupled ion exchange, electrocatalysis, and microbial interactions through ion exchange particle electrode (IEPE) in a reactor, named in-situ electro-catalytic biological coupling reactor (i-SECBCR). A small-scale experimental test system was established and a feasibility investigation was conducted under the condition of 1.248 L/h continuous flow. The results revealed that (1) the i-SECBCR showed higher average removal rates of SS, PEG 6000, COD and NH4+-N, i.e. 88.48 %, 41.26 %, 66.81 % and 51.61 %,which meant an increase by 5.04 %, 12.05 %, 0.46 %, and 34.50 %, respectively, compared with BAF; (2) the optimal current intensity (CI) of i-SECBCR for simultaneous removal of SS, PEG 6000, COD and NH4+-N was 0.40 mA cm-2; (3) Rhodobacter, Defluviimonas, unclassified_f__Microscillaceae, Pseudoxanthomonas, Novosphingobium, and unclassified_f__Xanthobacteraccae accounted for the main bacterial community in i-SECBCR; (4) the possible degradation mechanism was attributed mainly to the synergistic effect of ion exchange, electrocatalytic oxidation and biology. Therefore, the i-SECBCR was suitable to simultaneously advanced remove SS, PEG 6000, COD and NH4+-N in electroplating wastewater.

Insights into molecular mechanism of plasticizer biodegradation in Dietzia kunjamensis IITR165 and Brucella intermedia IITR166 isolated from a solid waste dumpsite

AIMS

Isolation of phthalate esters (PAEs) degrading bacteria from a solid waste dumpsite could degrade many plasticizers efficiently and to investigate their degrading kinetics, pathways, and genes.

METHODS AND RESULTS

Based on their 16S rRNA gene sequence the strains were identified as Dietzia kunjamensis IITR165 and Brucella intermedia IITR166, which showed a first-order degradation kinetic model under lab conditions. The quantification of phthalates and their intermediate metabolites identification were done by using ultra-high-performance liquid chromatography (UHPLC) and gas chromatography-tandem mass-spectrometry (GC-MS/MS), respectively. Both the bacteria utilized >99% dibutyl phthalate at a high concentration of 100-400 mg L-1 within 192 h as monitored by UHPLC. GC-MS/MS revealed the presence of metabolites dimethyl phthalate (DMP), phthalic acid (PA), and benzoic acid (BA) during DBP degradation by IITR165 while monobutyl phthalate (MBP) and PA were identified in IITR166. Phthalate esters degrading gene cluster in IITR165 comprised two novel genes coding for carboxylesterase (dkca1) and mono-alkyl phthalate hydrolase (maph), having only 37.47% and 47.74% homology, respectively, with reported phthalate degradation genes, along with the terephthalate dioxygenase system (tphA1, A2, A3, and B). However, IITR166 harbored different gene clusters comprising di-alkyl phthalate hydrolase (dph_bi), and phthalate dioxygenase (ophA, B, and C) genes.

CONCLUSIONS

Two novel bacterial strains, Dietzia kunjamensis IITR165 and Brucella intermedia IITR166, were isolated and found to efficiently degrade DBP at high concentrations. The degradation followed first-order kinetics, and both strains exhibited a removal efficiency of over 99%. Metabolite analysis revealed that both bacteria utilized de-methylation, de-esterification, and decarboxylation steps during degradation.

Biodegradation of di(2-ethylhexyl) phthalate by a new bacterial consortium

Di(2-ethylhexyl) phthalate (DEHP) with continuous high concentration was used as the sole carbon and energy source to isolate a new bacterial consortium (K1) from agricultural soil covered with plastic film for a long time. Unclassified Comamonadaceae, Achromobacter, and Pseudomonas in K1 were identified as major genera of the consortium by high-throughput sequencing, and unclassified Commanadaceae was first reported to be related to DEHP degradation. Response surface method (RSM) showed that the optimum conditions for K1 to degrade DEHP were 31.4 °C, pH 7.3, and a concentration of 420 mg L^-1. K1 maintains normal cell viability and stable DEHP degradation efficiency in the range of 10-3000 mg L^-1 DEHP concentration, which is superior to existing research. The biodegradation of DEHP followed first-order kinetics when the initial concentration of DEHP was between 100 and 3,000 mg L^-1. GC-MS analysis of different treatment groups showed that DEHP was degraded by the consortium group through the de-esterification pathway, and treatment effect was significantly better than that of the single bacteria treatment group. The subsequent substrate utilization experiment further confirmed that K1 could quickly mineralize DEHP. In addition, K1 has high degradation capacity for the most common phthalate acid esters in the environment.

Remediation of phthalate acid esters from contaminated environment—Insights on the bioremedial approaches and future perspectives

Phthalates are well-known emerging pollutants that are toxic to the environment and human health. Phthalates are lipophilic chemicals used as plasticizers in many of the items for improving their material properties. These compounds are not chemically bound and are released to the surroundings directly. Phthalate acid esters (PAEs) are endocrine disruptors and can interfere with hormones, which can cause issues with development and reproduction, thus there is a huge concern over their existence in various ecological surroundings. The purpose of this review is to explore the occurrence, fate, and concentration of phthalates in various environmental matrices. This article also covers the phthalate degradation process, mechanism, and outcomes. Besides the conventional treatment technology, the paper also aims at the recent advancements in various physical, chemical, and biological approaches developed for phthalate degradation. In this paper, a special focus has been given on the diverse microbial entities and their bioremedial mechanisms executes the PAEs removal. Critically, the analyses method for determining intermediate products generated during phthalate biotransformation have been discussed. Concluisvely, the challenges, limitations, knowledge gaps and future opportunities of bioremediation and their significant role in ecology have also been highlighted.

Enhancing fluoroglucocorticoid defluorination using defluorinated functional strain Acinetobacter. pittii C3 via humic acid-mediated biotransformation

Defluorination is a key factor in reducing biologically accumulated carcinogenic and teratogenic toxicity of fluoroglucocorticoids (FGCs). To enhance defluorination efficiency, a highly efficient defluorination-degrading strain Acinetobacter. pittii C3 was isolated, and the promotion mechanism through humic acid (HA)-mediated biotransformation was investigated. Optimal biodegradation conditions for Acinetobacter sp. pittii C3 were pH of 7.0, temperature of 25 ℃, and HA content of 5.5 mg/L, according to response surface methodology analysis. The attenuation rate constant and maximum defluorination percentage of triamcinolone acetonide (TA) in HA-mediated biotransformation system (HA-C3) were 3.99 × 10^-2 and 96%, respectively, which were 2.22 and 1.24 times higher than those in the unitary C3 biodegradation system (U-C3), respectively. The major defluorination pathways included elimination, hydrolysis, and hydrogenation, with contributions of 24.5%, 32.4%, and 43.1%, respectively. The bio-reductive hydrodefluorination rate was enhanced by 1.89 times that of HA-mediated, while the other two defluorination pathways exhibited insignificant changes. HA, as the congeries of negatively charged microbes and hydrophobic TA, accelerates the electron transfer rate between Acinetobacter. pittii C3 and TA through the quinone groups. Furthermore, the mutual conversion between the functional groups of hydroxyl oxidation and ketone reduction of HA provided electron donors for TA reductive defluorination and hydrogenation and electron acceptors for TA oxidation. This study provides an effective strategy for FGC-enhanced detoxification using natural HA.

Efficient degradation of naproxen in a three dimensional biofilm electrode magnetism reactor (3DBEMR): Removal performance and microbial community

A three-dimensional biofilm electrode magnetism reactor (3DBEMR) was constructed to removal naproxen (NPX). This study evaluated 3DBEMR performance in removal of refractory NPX, while also discussing the effect of the electro-magnetic superposition on microbial community by high throughput sequencing. Results indicated that 3DBEMR's average removal rate for NPX stood at 88.36%, representing an increase by 75.24%, 65.03% and 12.36%, respectively, compared to 3DBR (Three-Dimensional Biofilm Reactor), 3DBMR (Three-Dimensional Biofilm Magnetism Reactor) and 3DBER (Three-Dimensional Biofilm Electrode Reactor). This was attributed to the influence of electro-magnetic adsorption, electro-oxidaton/catalysis, and electro-magnetic biodegradation. Another major contributing factor to NPX removal was the presence in 3DBEMR of high-abundance genera such as Rhodobacter, Porphyrobacter, Methyloversatilis, Sphingopyxis,Bosea, Singulisphaera, Sphingomonas. Therefore, the 3DBEMR was successfully demonstrated to be a flexible and effective technique in NPX degradation, which would help to better understand the effect of superposition of electric and magnetic fields on microbial community.

Prediction of phthalate acid esters degradation in soil using QSAR model: A combined consideration of soil properties and quantum chemical parameters

Phthalic acid esters (PAEs) are predominant hazardous substances and endocrine-disrupting compounds to be controlled in soil. The degradation behaviors of PAEs in soil had been long term concerned. Thus, the degradation rate (K) is important for assessing theexposure risk and is of great significance in evaluating the ecological risk of PAEs in soil environment. But by far, quantitative structure activity relationship (QSAR) models for PAEs degradation have rarely been considered in soil environment. In this study, quantum chemical parameters were considered along with soil properties as two kinds of descriptors in QSAR model. A total of 32 logk of PAEs were collected from reference and experiment. Degradation kinetics in soils were determined by pseudo-first order kinetic models. The residual concentration of PAEs in Udic ferrosols and Aquic cambisols suggesting a potential expose risks of PAEs to ecosystem in soil. The QSAR model between logk and quantum chemical parameters revealed that E_HOMO and qC- are two predominant factors in determining logk value. Furthermore,our study further indicated that soil organic matter (SOM) as new predictor contributes more to predict logk values of PAEs during degradation process than pH. Results from this study make a new contribution for methods to predict the degradation of PAEs in soil environment and highlight the potential to evaluate the environmental risks of degradation of PAEs.

Environmental role of aromatic carboxylesterases

The carboxylesterases (EC 3.1.1.x) are widely distributed and form an important yet diverse group of hydrolases catalysing the ester bond cleavage in a variety of substrates. Besides acting on plant cell wall components like cutin, tannin and feruloyl esters, they are often the first line of defence to metabolize drugs, xenobiotics, pesticides, insecticides and plastic. But for the promiscuity of some carboxylesterases and cutinases, very few enzymes act exclusively on aromatic carboxylic acid esters. Infrequent occurrence of aromatic carboxylesterases suggests that aromatic carboxylesters are inherently more difficult to hydrolyse than the regular carboxylesters because of both steric and polar effects. Naturally occurring aromatic carboxylesters were rare before the anthropogenic activity augmented their environmental presence and diversity. An appraisal of the literature shows that the hydrolysis of aromatic carboxylic esters is a uniquely difficult endeavour and hence deserves special attention. Enzymes to hydrolyse such esters are evolving rapidly in nature. Very few such enzymes are known and they often display much lower catalytic efficiencies. Obviously, the esters of aromatic carboxylic acids, including polyethylene terephthalate waste, pose an environmental challenge. In this review, we highlight the uniqueness of aromatic carboxylesters and then underscore the importance of relevant carboxylesterases.

Biotechnology-based microbial degradation of plastic additives

Plastic additives are agents responsible to the flame resistance, durability, microbial resistance, and flexibility of plastic products. High demand for production and use of plastic additives is associated with environmental accumulation and various health hazards. One of the suitable methods of depleting plastic additive in the environment is bioremediation as it offers cost-efficiency, convenience, and sustainability. Microbial activity is one of the effective ways of detoxifying various compounds as microorganisms can adapt in an environment with high prevalence of pollutants. The present review discusses the use and abundance of these plastic additives, their health-related risks, the microorganisms capable of degrading them, the proposed mechanism of biodegradation, and current innovations capable of improving the efficiency of bioremediation.

Remediation of chromium- and fluoride-contaminated groundwater by immobilized Citrobacter sp. on a nano-ZrO2 hybrid material

To effectively address excessive SO₄^2-, Cr(VI), total chromium and F^- in the groundwater of acidic mining areas, a facultative anaerobic bacterium, Citrobacter, with sulfate-reducing properties, tolerance to hexavalent chromium and the ability to reduce Cr(VI) to Cr(III) was isolated and domesticated. Based on microbial immobilization technology, a nano-ZrO₂ polyacrylamide hybrid material was prepared as an embedding agent to form nano-ZrO₂ polyacrylamide Citrobacter (ZPC) particles. ZPC was microscopically characterized, and the removal performance and mechanism of ZPC for SO₄^2-, Cr(VI), total chromium and F^- in groundwater were analyzed. The results of single-factor tests showed that the optimal reaction conditions included a reaction temperature of 35°C, Citrobacter dosage of 35% (volume ratio) in the particles and hybrid material dosage of 300 mL; under these conditions, the removal rates of SO₄^2-, Cr(VI), total chromium and F^- were 70.5%, 100%, 100% and 93.3%, respectively, and the pH value increased from 4.6 to 8.07. On this basis, the effects of the reaction layer type, influent hydraulic load and influent concentration on the removal efficiency of polluted groundwater were studied through dynamic experiments. The experimental results showed that ZPC particles were better than Citrobacter as a reaction layer; the optimal influent hydraulic load was 3.0 m³/(m²·d); the selectivity of ZPC particles to anions and anionic groups was different; and the order of adsorption selectivity was F^- > Cr(VI) > SO₄^2-.