Geometrical Factors Influencing the Hemodynamic Behavior of the AAA Stent Grafts: Essentials for the Clinician

Impact of Cross-Limb Stent-Graft Configuration on Hemodynamics in Abdominal Aortic Aneurysm Interventional Therapy

PURPOSE

The cross-limb (CL) technique is a commonly used endovascular treatment for addressing unfavorable anatomical features in patients with abdominal aortic aneurysm (AAA). The configuration of CL stent-graft plays a critical role in determining the postoperative hemodynamic properties and physiological behaviors, which ultimately impact the efficacy and safety of endovascular AAA treatment. This study aims to investigate the relationship between hemodynamics and CL stent-graft configuration from a hemodynamic perspective.

METHODS

Five distinct geometric models of cross-limb (CL) stent-graft configurations were constructed by optimizing the real clinical computed tomography angiography (CTA) data. These models varied in main body lengths and cross angles and were used to perform numerical simulations to analyze various hemodynamic parameters. Flow pattern, distribution of wall shear stress (WSS)-related parameters, localized normalized helicity (LNH), pressure drop, and the displacement force of all models were examined in this paper.

RESULTS

In patient-specific cases, helical flow and WSS increase with the main body. However, it also generated secondary flow in localized areas, leading to increased oscillation in the WSS direction. Notably, increasing the stent graft's main body length or decreasing the cross angle reduced the displacement force exerted on the stent-graft. Reducing the cross angle did not significantly alter the hemodynamic characteristics.

CONCLUSION

In the clinical practice of CL deployment, it is crucial to carefully consider the stent-graft configuration and the patient specific to achieve optimal postoperative outcomes. This study provides valuable insights for guiding stent selection and treatment planning in patients with abdominal aortic aneurysm undergoing CL techniques, from a hemodynamic perspective.

A hemodynamic study of blood flow models on various stent graft configurations during aorto-iliac reconstruction

PURPOSE

To compare the hemodynamic performance of three (Bottom Up non-ballet, Top-Down non-ballet, Top Down ballet) idealized stent graft configurations used during endovascular repair of abdominal aortic aneurysms, under the influence of various rheological models.

METHODS

Ten rheological models are assumed and a commercial finite volume solver is employed for the simulation of blood flow under realistic boundary conditions. An appropriate mesh convergence study is performed and five hemodynamic variables are computed: the time average wall shear stress (TAWSS), oscillatory shear index (OSI), relative residence time (RRT), endothelial cell activation potential and displacement force (DF) for all three configurations.

RESULTS

The choice of blood flow model may affect results, but does not constitute a significant determinant on the overall performance of the assumed stent grafts. On the contrary, stent graft geometry has a major effect. Specifically, the Bottom Up non-ballet type is characterized by the least favorable performance presenting the lowest TAWSS and the highest OSI, RRT and ECAP values. On the other hand, the Top Down ballet type presents hemodynamic advantages yielding the highest TAWSS and lowest OSI, RRT and ECAP average values. Furthermore, the ballet type is characterized by the lowest DF, although differences observed are small and their clinical relevance uncertain.

CONCLUSIONS

The effect of the assumed rheological model on the overall performance of the grafts is not significant. It is thus relatively safe to claim that it is the type of stent graft that determines its overall performance rather than the adopted blood flow model.

Geometrical Changes of the Aorta as Predictors for Thromboembolic Events After EVAR With the Anaconda Stent-Graft

PURPOSE

Thromboembolic events (TE), including limb graft occlusion (LGO) and distal limb embolization (DLE), are common complications after endovascular aneurysm repair (EVAR). The aim of this study was to find predictors for TE in patients treated with the Anaconda stent-graft for infrarenal aneurysms.

MATERIALS AND METHODS

Geometrical and anatomical variables were retrospectively analyzed in a consecutive Anaconda cohort. Pre- and postoperative CT scans were used to derive geometrical parameters length, curvature, torsion, and tortuosity index (TI) from the center lumen lines (CLLs). Limb characteristics, pre-to-post EVAR and mid-term-follow-up changes in the parameters were evaluated for their predictive value for TE.

RESULTS

Eighty-four patients (mean age 74±8.3 years, 74 men) were enrolled. The risk of TE was lowered with pre-to-post implant decreasing TI (steps of 0.05: OR: 1.30, 95% CI: 1.01-1.66, p=0.04), pre-to-post implant decreasing mean curvature (OR: 1.08, 95% CI: 1.01-1.16, p=0.03), and a larger degree of circumferential common iliac artery (CIA) calcification (OR: 0.98, 95% CI: 0.97-1.00, p=0.03). The only LGO predictor was the caudal relocation of maximal curvature after EVAR (OR: 1.01, 95% CI: 1.00-1.01, p=0.04). Preventors of DLE were CIA diameter (OR: 0.87, 95% CI: 0.76-0.99, p=0.04), circumferential CIA calcification (OR: 0.97, 95% CI: 0.95-1.00, p=0.03), mean and maximal curvature of the preoperative aortoiliac trajectory (OR: 0.86, 95% CI: 0.79-0.94, p<0.01 and OR: 0.97, 95% CI: 0.95-1.00, p=0.03, respectively) and pre-to-postoperative decrease in mean curvature (OR: 1.11, 95% CI: 1.02-1.21, p=0.02). Midterm TE predictors were length (OR: 0.95, 95% CI: 0.89-1.01, p=0.08) and torsion maximum location (OR: 1.01, 95% CI: 0.99-1.01, p=0.10).

CONCLUSION

The present study confirms that treatment of infrarenal AAA with an Anaconda stent-graft is related to a relatively high TE rate which decreases with a pre-to-postoperative reduction in curvature and TI, and a larger degree of circumferential CIA calcification. In other words, more aortoiliac straightening and more circumferential CIA calcification may prevent TE development after EVAR with this stent-graft.

Selection of Bifurcated Grafts' Dimensions during Aorto-Iliac Vascular Reconstruction Based on Their Hemodynamic Performance

During the vascular surgical reconstruction of aorto-iliac occlusive/aneurysmal disease, bifurcated grafts are used where vascular surgeons intra-operatively select the size and the relative lengths of the parent and daughter portions of the graft. Currently, clinical practice regarding the selection of the most favorable geometric configuration of the graft is an understudied research subject: decisions are solely based on the clinical experience of the operating surgeon. This manuscript aims to evaluate the hemodynamic performance of various diameters, D, of bifurcated aortic grafts and relate those with proximal/distal part length ratios (the angle φ between the limbs is used as a surrogate marker of the main body-to-limb length ratio) in order to provide insights regarding the effects of different geometries on the hemodynamic environment. To this end, a computationally intensive set of simulations is conducted, and the resulting data are analyzed with modern statistical regression tools. A negative curvilinear relationship of TAWSS with both φ and D is recorded. It is shown that the angle between limbs is a more important predictor for the variability of TAWSS, while the graft's diameter is an important determinant for the variability of OSI. Large percentages of the total graft area with TAWSS < 0.4 Pa, which correspond to thrombogenic stimulating environments, are only observed for large values of φ and D > 20 mm. This variable ranges from 10% (for the smallest values of φ and D) to 55% (for the largest φ and D values). Our findings suggest that grafts with the smallest possible angle between the limbs (i.e., smallest parent-to-daughter length ratio) present the most favorable hemodynamic performance, yielding the smallest percentage of total graft area under thrombogenic simulating environments. Similarly, grafts with the smallest acceptable diameter should be preferred for the same reason. Especially, grafts with diameters greater than 20 mm should be avoided, given the abrupt increase in estimated thrombogenic areas.

Classification of Blood Rheological Models through an Idealized Symmetrical Bifurcation

The assumed rheological behavior of blood influences the hemodynamic characteristics of numerical blood flow simulations. Until now, alternative rheological specifications have been utilized, with uncertain implications for the results obtained. This work aims to group sixteen blood rheological models in homogeneous clusters, by exploiting data generated from numerical simulations on an idealized symmetrical arterial bifurcation. Blood flow is assumed to be pulsatile and is simulated using a commercial finite volume solver. An appropriate mesh convergence study is performed, and all results are collected at three different time instants throughout the cardiac cycle: at peak systole, early diastole, and late diastole. Six hemodynamic variables are computed: the time average wall shear stress, oscillatory shear index, relative residence time, global and local non-Newtonian importance factor, and non-Newtonian effect factor. The resulting data are analyzed using hierarchical agglomerative clustering algorithms, which constitute typical unsupervised classification methods. Interestingly, the rheological models can be partitioned into three homogeneous groups, whereas three specifications appear as outliers which do not belong in any partition. Our findings suggest that models which are defined in a similar manner from a mathematical perspective may behave substantially differently in terms of the data they produce. On the other hand, models characterized by different mathematical formulations may belong to the same statistical group (cluster) and can thus be considered interchangeably.

Should the Proximal Part of a Bifurcated Aortic Graft be Kept as Short as Possible? A Computational Study Elucidates on Aortic Graft Hemodynamics for Various Main Body Lengths

BACKGROUND

It is accepted that surgically placed bifurcated aortic grafts should be shaped as a short proximal main tube with two long distal limbs. We aim to investigate the hemodynamic effect of different main body lengths in bifurcated aortic grafts using 3D computer models.

METHODS

Five different idealized models are generated to represent an aorto-bifemoral graft. Distance from renal to femoral arteries is set at 25cm and distance between the femoral arteries is set at 14cm. Values of the main body length taken into account to build the idealized models are 3cm, 6cm, 9cm, 12cm and 15cm. Blood flow resistance, Time Average Wall Shear Stress (TAWSS), Oscillatory Shear Index (OSI) and Relative Residence Time (RRT) are estimated using the constructed 3D models.

RESULTS

The total resistance decreased monotonically by as far as 40% as the main body length increased. Appropriate hemodynamic simulations show a maximum TAWSS decrease and a corresponding maximum OSI and RRT increase with elongated main body configurations, indicating a hemodynamic benefit of the "Short" main body configuration. Nevertheless, the differences in these later variables are small, affecting a limited portion of the geometries.

CONCLUSION

A long main body of a bifurcated aortic graft results in significantly reduced total resistance in idealized models designed to represent an aorto-bifemoral surgical graft, while the differences observed in TAWSS, OSI and RRT between models are small.

Identifying high risk for proximal endograft failure after EVAR in patients suitable for both open and endovascular elective aneurysm repair

INTRODUCTION

Proximal endograft failure (type Ia endoleak or migration) after endovascular aneurysm repair (EVAR) is associated with hostile aneurysm neck morphology. Neck scoring systems were developed to predict proximal endograft failure but were studied in retrospective studies, which due to selection bias may have led to an overestimation of bad outcomes after EVAR. To predict patients who benefit from open repair, preoperative neck morphology and occurrence of long-term proximal endograft failure were investigated in patients enrolled in the endovascular arm of the DREAM-trial who were suitable for open repair by definition and have long-term follow-up.

METHODS

A post-hoc on-treatment analysis of patients after EVAR was performed in 171 patients. Aneurysm neck morphology was quantified using the aneurysm severity grading (ASG)-neck score calculated on pre-operative CT-angiography images. The ASG-neck score was used to predict proximal endograft failure. ROC analysis was performed to calculate a threshold to divide favorable and unfavorable aneurysm necks (low and high-risk), positive and negative likelihood-ratios were calculated accordingly. Freedom from proximal endograft failure was compared between groups using Kaplan Meier analysis.

RESULTS

During a median follow-up of 7.6 years, 20 patients suffered proximal endograft failure. ROC analysis showed an AUC 0.77 (95% CI 0.65-0.90; p<0.001) indicating acceptable prediction. The threshold was determined at ASG-neck score ≥5, 30 patients had unfavorable neck morphology of whom 11 developed proximal endograft failure. The positive likelihood-ratio was 4.4 (95% CI 2.5-7.8) and the negative likelihood-ratio was 0.51 (95% CI 0.3-0.8). Twelve years postoperatively, freedom from proximal endograft failure was 91.7% in favorable and 53.2% in unfavorable groups, difference 38.5% (95% CI 13.9-63.1; p<0.001).

CONCLUSION

In this study, the ASG-neck score predicted proximal endograft failure during the entire follow-up. This exhibits the persistent risk for proximal endograft failure long after EVAR and calls for ongoing surveillance especially in patients with unfavorable aneurysm necks.

Update on the TREO endograft device: overview of its safety and efficacy

INTRODUCTION

The TREO abdominal aortic stent graft system (Terumo Aortic, Sunrise, Fla) is a low-profile, trimodular endovascular endoprosthesis for the endovascular repair of abdominal aortic aneurysm (AAA). The objective of the present study was to collect and discuss all the available modern data of this device highlighting especially its mid-and long-term clinical results.

AREAS COVERED

This updated review article presents the most current results from great-scale clinical studies and the RATIONALE registry involving also angulated neck anatomies and challenging AAA geometries, reflecting the real-world experience.

EXPERT OPINION

The global, multicenter RATIONALE registry prospectively enrolled 202 patients (mean age 73.0 ± 7.8 years) who underwent EVAR. Technical success, primary clinical success and assisted primary patency rate was 96%, 92.2% and 97%, respectively. The clinical success at 1 year was 96%. Another multicenter, non-randomized, clinical trial confirmed also high technical and clinical success. Additionally, a comparative study comparing favorable and hostile necks in AAA, demonstrated a comparable technical success (95.2%), achieving proper sealing and technical success in the hostile neck group. TREO endograft seems to be safe and effective for EVAR, especially in hostile neck anatomies. Long-term outcomes from ongoing registries are awaited to complete these results.

Modeling and Computational Comparison of the Displacement Forces Exerted between the AFX Unibody Aortic Stent Graft and its Hybrid Combination with a Nitinol-based Proximal Aortic Cuff

BACKGROUND

The bifurcated AFX (Endologix, Inc, Irvine, CA, USA) aortic stent-graft is the sole unibody endograft for the management of Abdominal Aortic Aneurysms (AAA). In order to improve the AFX central sealing and clinical efficacy in challenging cases, a replacement of the central chromium-cobaltium AFX extension with a Nitinol-based proximal aortic cuff has been suggested. Yet, comparative data regarding the hemodynamic performance of this design is missing. Aim of this study was to compare the displacement forces (DF) acting on the hybrid AFX-Endurant design, with the classic AFX and Endurant endografts, in angulated and non-angulated cases based on patient-specific Computational Fluid Dynamics (CFD) simulations.

METHODS

3D endograft models of 11 treated AAA cases were reconstructed from Computed Tomography Angiography (CTA) imaging data: 5 cases of AFX, 3 cases of the combination AFX-Endurant and 3 cases of the classic Endurant design. The DF on the main-body, the iliac limbs, and the entire stent-graft was calculated by processing the velocity and pressure fields generated by pulsatile CFD simulations.

RESULTS

The range of total DF (acting on the whole endograft structure) in the AFX, hybrid AFX-Endurant and Endurant group was 2.5-5.2N, 2.0-5.9N and 1.9-2.9N respectively, with the maximum total DF being lower for Endurant. The DF on the main-body of the classic and hybrid AFX cases were higher than the right and left iliac limbs (2.5-4.9N vs. 0.6-5.3N and 0.7-3.6N respectively). Conversely, the DF on the main-body of the Endurant cases was comparable to the force exerted on the right and left limbs. When separating the cases with respect to their neck angulation, the DF on all endograft parts (main-body, limbs) and on the endograft as a whole were lower for the hybrid AFX-Endurant group compared to the classic AFX and Endurant groups, for cases with almost straight neck.

CONCLUSION

The off-label use of the hybrid AFX-Endurant stent-graft does not seem superior to the conventional AFX or Endurant endografts in angulated cases but was associated with lower DF than AFX or Endurant in non-angulated cases. The clinical value and utility of these findings remain to be elucidated.

Geometrical changes in Anaconda endograft limbs after endovascular aneurysm repair: A potential predictor for limb occlusion

The emergence of limb occlusion after endovascular aneurysm repair may be related to the conformational changes between the endograft structure and the patient's anatomy. This study analyzed detailed geometric changes of Anaconda endograft (Terumo Aortic, Inchinnan, Scotland, UK) limbs during the cardiac cycle-based computed tomography on serial imaging after graft implantation. Fifteen patients (mean age 72.8 ± 3.7 years; 14 men) underwent postoperative electrocardiogram-gated computed tomography scans according to a prospective study design between April 2014 and May 2017. Changes in curvature, length of the limbs, and distances between successive stent rings (inter-ring distance) of the endograft limbs during a 2-year follow-up period were quantified using meticulous image processing methods involving image registration, centerline extraction, and model-based stent-ring segmentation. From discharge to 24 months, mean curvature increased significantly by 9.6 m^-1 (standard deviation [SD], 11.1 m^-1; 95% confidence interval [CI], 3.4 to 15.8 m^-1; P = .002) for the right limbs and by 6.1 m^-1 (SD 9.4 m^-1; 95% CI, 0.8 to 11.5 m^-1; P = .21) for the left limbs. The length of the right limbs decreased significantly, by 9.5 mm (SD 7.6 mm; 95% CI, 3.5 to 15.6 mm; P = .002); the length of the left limbs decreased by 10.1 mm (SD 5.1 mm; 95% CI, 5.9 to 14.2 mm; P < .001). The minimal inter-ring distance decreased by 0.36 mm (SD 0.26 mm; 95% CI, 0.17 to 0.55 mm; P < .001) for the right limbs and 0.35 mm (SD 0.19 mm; 95% CI, 0.21 to 0.49 mm; P < .001) for the left limbs. Cardiac pulsatility-induced changes in curvature, limb length, and inter-ring distance were negligible (2%, 0.3% and 0.3%, respectively). Changes in the geometry of the Anaconda endograft limbs after endovascular aortic aneurysm repair were observed during a 2-year follow-up manifest as an increase in curvature, shortening of the stent-graft limbs, and a corresponding decrease in inter-ring distance. These stent-graft conformational changes could result in inward folding of the graft fabric, which may relate to the emergence of limb occlusion. Further investigation of these metrics in a larger cohort involving patients with and without occlusions may allow determination of their predictive value.

Computational Comparison between the Altura Aortic Endograft Configuration and the Classic Bifurcated Idealized Designs

BACKGROUND

The Altura (Alt) endograft is a new design, lacking the classic main body with the flow divider. Instead, 2 proximal D-shaped endografts form a round circumference in the aortic neck for secure sealing and land in the iliac arteries in a cross-limb fashion. The aim of this computational study was to compare hemodynamically this model with the classic bifurcated (Bif) and cross-limb (Cx) endograft designs of equal total length.

METHODS

All 3D endograft models were created using the finite volume analysis application ANSYS CFX (Ansys Inc., Canonsburg, PA, USA). The Alt inlet was constructed as 2 opposing D-shaped sections. The flow was quantified by time-averaged wall shear stress (TAWSS), oscillatory shear index (OSI), relative residence time (RRT), and helicity. The displacement forces were also compared for all models with computational fluid dynamics analysis.

RESULTS

The Alt design was associated with lower forces (range 4.0-5.9Ν) than Bif (4.17-6.15 N) and Cx (4.43-6.53 N). The 2-piece inlet site of the separated limbs of Alt has higher TAWSS than the uniform inlet segment of the Cx and the Bif model. Most importantly, the mid-segment and distal segment of the limbs in the Alt design present higher TAWSS in a greater area than the other 2 models. The inlet of the Alt design showed higher OSI than the other accommodations and similar or comparable OSI values along their mid-limb and distal limb segments. The range, location, and values or RRT were comparable between the 3 models. Helicity in the iliac limbs is more prominent in the crossed accommodations (Alt and Cx).

CONCLUSIONS

Only small differences in the hemodynamic indices and displacement forces were detected between the Alt and classic accommodations. From this point of view, the Alt design could be theoretically considered not inferior to other widely used endograft configurations.

Endograft Specific Haemodynamics After Endovascular Aneurysm Repair: Flow Characteristics of Four Stent Graft Systems

OBJECTIVES

The implication of haemodynamics in the occurrence of complications after endovascular aneurysm repair (EVAR) has been raised in the literature. Different aortic stent graft configurations may lead to different haemodynamic properties. The current study deals with the post-operative haemodynamic variability between four stent graft systems with different structure, material, and type of fixation.

METHODS

Computed tomography data of 32 patients were used, equally distributed among the four endograft groups, namely the AFX, Endurant, Excluder, and Nellix. Velocity, wall shear stress (WSS), and helicity statistics were calculated, in regions around the flow division where disturbances are expected. The haemodynamic data were compared between and within the groups.

RESULTS

The morphology of AAAs pre-operatively did not vary significantly among the four groups. Before the flow division, lowest velocity was observed in Endurant cases and highest in Nellix cases. Endurant induced the lowest peak WSS and Nellix the highest (p = .03). The helicity levels were low in AFX and Nellix cases and high in Endurant and Excluder cases. After the flow division, the trend in the results was preserved. Nellix induced the highest velocity and WSS, followed closely by Excluder and AFX. There was a significant increase of helicity before and after flow division in AFX (p <0.001, R² = 0.09) and Nellix (p <0.001) cases.

CONCLUSIONS

It has been shown that different types of endografts induce variable haemodynamic conditions around the flow division. The parallel limb structure, featured by Nellix, seems to induce favourable flow conditions in terms of velocity and WSS, while helical flow before the flow division is suppressed. High WSS is generally considered to be a desirable flow characteristic in endovascular devices, whereas helicity extremes (very low or high) are potentially a negative sign. Endurant, with the stiffer material and the short neck structure, was associated with the lowest blood velocity and WSS values but preserved high helicity levels. The AFX and Excluder, which include the same material, induced similar haemodynamic conditions.

Stent-graft surface movement after endovascular aneurysm repair: baseline parameters for prediction, and association with migration and stent-graft-related endoleaks

OBJECTIVES

To evaluate the influence of baseline parameters on the occurrence of stent-graft surface movement after endovascular aneurysm repair (EVAR) and to investigate its association with migration and stent-graft-related endoleaks (srEL).

METHODS

In this retrospective, cross-sectional study, three-dimensional surface models of the stent-graft, delimited by landmarks using custom-built software, were derived from the pre-discharge and last follow-up computed tomography angiography (CTA). Stent-graft surface movement in the proximal anchoring zone between these examinations was considered significant at a threshold of 9 mm. The Cox proportional hazards model was used to determine baseline variables associated with the occurrence of stent-graft surface movement. The association between migration and srEL with stent-graft surface movement was tested with the chi-square and the Fisher exact test, respectively.

RESULTS

Stent-graft surface movement was observed in 54 (28.9%) of 187 patients. Multivariate analysis revealed that age ([HR] 1.05; p = 0.017), proximal neck diameter ([HR] 5.07; p < 0.001), infrarenal aortic neck angulation ([HR] 1.02, p = 0.002), and proximal neck length ([HR] 0.62, p < 0.001) were significantly associated with the occurrence of stent-graft surface movement. Migration and srEL occurred in 17 (31.5%) and 5 (9.3%) patients, with and 11 (8.3%) and 2 (1.5%) without stent-graft surface movement (p < 0.001, p = 0.022).

CONCLUSIONS

Age, neck diameter, infrarenal neck angulation, and proximal neck length were significantly associated with the occurrence of stent-graft surface movement. Apart from possible use of adjunctive sealing systems, concerned patients may benefit from regular CTA surveillance, enabling timely diagnosis of subtle changes of stent-graft position.

KEY POINTS

• Stent-graft surface movement, demonstrating subtle, three-dimensional changes in stent-graft position in the proximal anchoring zone, can be derived from CTA examinations. • Age, proximal neck diameter, and infrarenal neck angulation were significantly associated with an increased incidence of stent-graft surface movement. Stent-graft surface movement is significantly more frequent in patients with stent-graft migration and stent-graft-related endoleaks. • Consideration of risk factors for stent-graft surface movement may help to identify patients who might benefit from regular CTA surveillance and timely diagnosis of subtle changes of stent-graft position, enabling re-interventions to prevent migration and srEL.

Patient-Specific Prediction of Abdominal Aortic Aneurysm Expansion Using Bayesian Calibration

Translating recent advances in abdominal aortic aneurysm (AAA) growth and remodeling (G&R) knowledge into a predictive, patient-specific clinical treatment tool requires a major paradigm shift in computational modeling. The objectives of this study are to develop a prediction framework that first calibrates the physical AAA G&R model using patient-specific serial computed tomography (CT) scan images, predicts the expansion of an AAA in the future, and quantifies the associated uncertainty in the prediction. We adopt a Bayesian calibration method to calibrate parameters in the G&R computational model and predict the magnitude of AAA expansion. The proposed Bayesian approach can take different sources of uncertainty; therefore, it is well suited to achieve our aims in predicting the AAA expansion process as well as in computing the propagated uncertainty. We demonstrate how to achieve the proposed aims by solving the formulated Bayesian calibration problems for cases with the synthetic G&R model output data and real medical patient-specific CT data. We compare and discuss the performance of predictions and computation time under different sampling cases of the model output data and patient data, both of which are simulated by the G&R computation. Furthermore, we apply our Bayesian calibration to real patient-specific serial CT data and validate our prediction. The accuracy and efficiency of the proposed method is promising, which appeals to computational and medical communities.

Postoperative Aortic Neck Dilation: Myth or Fact?

The abdominal aorta is the most common site of an aortic aneurysm. The visceral and most proximal infrarenal segment (aneurysm neck) are usually spared and considered more resistant to aneurysmal degeneration. However, if an abdominal aortic aneurysm (AAA) is left untreated, the natural history of the aortic neck is progressive dilatation and shortening. This may have significant implications for patients undergoing endovascular repair of AAAs (EVAR) as endograft stability and integrity of the repair are dependent on an intact proximal seal zone. Compromised seal zones, caused by progressive diameter enlargement and foreshortening of the aortic neck, may lead to distal endograft migration, type Ia endoleak, aortic sac repressurization, and, ultimately, aortic rupture.

The - Not So - Solid 5.5 cm Threshold for Abdominal Aortic Aneurysm Repair: Facts, Misinterpretations, and Future Directions

Abdominal aortic aneurysms (AAAs) represent a focal dilation of the aorta exceeding 1.5 times its normal diameter. It is reported that 4-8% of men and 0.5-1% of women above 50 years of age bear an AAA. Rupture represents the most disastrous complication of aneurysmal disease that is accompanied by an overall mortality of 80%. Autopsy data have shown that nearly 13% of AAAs with a maximum diameter ≤5 cm were ruptured and 60% of the AAAs >5 cm in diameter never ruptured. It is therefore obvious that the "maximum diameter criterion," as a single parameter that fits all patients, is obsolete. Investigators have begun a search for more reliable rupture risk markers for AAA expansion, such as the level and change of peak wall stress or AAA geometry. Furthermore, it is becoming more and more evident that intraluminal thrombus (ILT), which is present in 75% of all AAAs, affects AAA features and promotes their expansion. Though these hemodynamic properties of AAAs are significant and seem to better describe rupture risk, they are in need of specialized equipment and software and demand time for processing making them difficult in use and unattractive to clinicians in everyday practice. In the search for the addition of other risk factors or user-friendly tools, which may predict AAA expansion and rupture, the use of the asymmetrical ILT deposition index seems appealing since it has been reported to identify AAAs that may have an increased or decreased growth rate.

Immediate Change in Suprarenal Neck Angulation After Endovascular Aneurysm Repair

Purpose: To compare the immediate suprarenal neck angulation change between the Ovation stent-graft, with its inflatable sealing rings, and a stent-graft with a conventional sealing mechanism. Methods: A case-control study was conducted in which 30 consecutive patients (mean age 67 years; all men) with abdominal aortic aneurysm (AAA) treated with the Ovation stent-graft (group O) were retrospectively compared with 24 patients (mean age 77 years; all men) contemporaneously treated with the Endurant stent-graft (group E) at 3 high-volume tertiary vascular centers. The variables recorded were the aortic neck length, preoperative and postoperative angulation, minimum and maximum diameters of the infrarenal neck, as well as the maximum AAA diameter. All patients had undergone preoperative and postoperative (within 30 days) computed tomographic angiography. Multiple regression analysis compared the relative contribution to neck angulation change of each geometric parameter and the type of endograft. Data are presented as the mean ± standard deviation. Results: The mean preoperative suprarenal neck angulation in group O was 23.2°±18.0° compared with 23.8°±22.9° in group E ( t test, p=0.91). The neck lengths were 29.2±14.6 and 23.2±11.0 mm in groups O and E, respectively (p=0.1). Similarly, the minimum and maximum neck diameters were 22.4±2.6 and 25±3.5 mm, respectively, in group O vs 23.3±3.6 mm and 27.0±5.7 mm, respectively, in group E (p=0.3 and 0.12, respectively). The maximum transverse diameters of the AAA in the 2 groups were comparable, that is, 57.0±9.0 mm in group O vs 53.2±11.1 mm in group E (p=0.17). The Ovation stent-graft caused greater decrease in the aortic neck angulation postoperatively compared with the Endurant device (13.2°±16.1° vs 6.1°±5.9°, p=0.04). Multiple regression analysis revealed that preoperative neck angulation (β coefficient 0.37, p<0.001) and the type of endograft (β coefficient −7.91, p=0.01) had significant influence on the postoperative neck angulation change. The intraclass correlation coefficient ranged from 0.951 to 0.990 for the preoperative measurements and from 0.911 to 0.999 for the postoperative measurements for each examiner or the total of estimates at the measurement time points. Conclusion: The Ovation stent-graft induces greater postoperative reduction in the AAA neck angulation compared to an endograft with stent-supported graft seal. Expanded research to infrarenal angle as well to greater angles and correlation to clinical events is justified.