Cone-beam computed tomographic analysis of the morphological characterization of the nasopalatine canal in a pediatric population

Assessment of variations in the nasopalatine canal on CBCT: considerations from an anatomical point of view

PURPOSE

The nasopalatine canal (NPC) is one of the most significant anatomical markers in the anterior maxillary region. Its location is quite important, especially for implant placement. Therefore, the purpose of this study was to use cone-beam computed tomography (CBCT) to evaluate the morphology, size, and anatomic variations of the NPC.

METHODS

A total of 150 individual CBCT images were assessed in various sections to evaluate the dimensions, morphology, and extent of the NPC. Reformatted sagittal images were chosen to classify the shape and course of the canal. The Student's t-test, the χ² test, and Pearson correlation coefficients were used.

RESULTS

The NPC was longer in males than in females, and the mediolateral diameter of the canal was greater in older adults. In sagittal sections, the canal predominantly exhibits a cylindrical shape, while a spindle shape is the least common. In coronal sections, a single shape is most frequently observed, with a Y-shape being the least common. Regarding the orientation of the canal, slanted canals are more prevalent, whereas vertically curved canals are rare. Typically, 2 canal openings are observed, with 4 openings being the least common.

CONCLUSION

The current study highlights the challenges associated with identifying the anatomical appearance and variations of the NPC. Consequently, possessing a thorough understanding of this anatomy is essential before undertaking any surgical procedures, such as implant placement. This knowledge helps prevent complications such as nerve injury-related loss of sensation, bleeding due to blood vessel injury, and the development of a nasopalatine duct cyst following trauma to the canal during surgery.

Retrospective evaluation and descriptive analysis of the prevalence of anatomical structures and variations in CBCT images before dental implant planning in a group Turkish population, part I

PURPOSE

The aim of this study is to emphasize the importance of using cone-beam computed-tomography in order to determine the anatomical structures and their variations before the treatment in patients who apply to the dentist clinic for implant treatment.

METHODS

In the study, CBCT images of 500 adult patients (240 female and 260 male), aged between 21 and 82 years, who applied for implant treatment due to missing teeth, were retrospectively analyzed. Anatomical structures and variations such as nasopalatine canal(NPC), canalis sinuosus(CS), antral alveolar artery(AAA), were evaluated in multiplanar reformation(MPR) sections which are axial, sagittal and coronal can be viewed in consistence with each other.

RESULTS

The incidence of anatomical variation of CS in the right region was similar according to gender. The "Funnel" appearance of the NPC shape was found most common shape in both female and male patients (n = 89; 37.1% for females and n = 71; 27.3% for males).

CONCLUSION

CBCT has become the most popular 3D imaging method in dental practice especially for planning dental implants. Understanding the relationship with important anatomical structures before implant applications is crucial in dealing with potential complications that may arise afterward. Assessing significant anatomical structures by CBCT and taking precautions against possible risks facilitate the work of dentists during and after procedures.

Evaluation of the Nasopalatine Canal of Patients With and Without Cleft Lip and Palate in CBCT Exams

OBJECTIVE

To identify and compare the morphology and dimensions of the nasopalatine canal (NPC) of individuals with and without cleft lip and palate using Conical Beam Computed Tomography (CBCT) images and to relate the results to the type of cleft and tooth absences in the region.

SETTING

This is a cross-sectional, analytical study with a retrospective sample.

PATIENTS, PARTICIPANTS

100 CBCT exams from patients with cleft lip and palate and 100 CBCT exams from patients without cleft lip and palate were used.

INTERVENTIONS

The NPC was evaluated for its morphology and measurements in the coronal, sagittal, and axial reformatting of CBCT exams.

RESULTS

It was obtained as a result that in the group of patients with a cleft, the shapes of funnel, banana, and needle of the NPC were more frequent than in the control group. Patients with cleft lip and palate had significantly a larger nasopalatine foramen and a larger NPC diameter, besides a significantly shorter NPC, compared to controls. In both groups, edentulous patients had less anterior maxillary bone thickness, when compared to patients with maxillary anterior teeth. Patients with clefts had a bone thickness buccal to the NPC less than in the control group.

CONCLUSIONS

This study confirms the anatomical variability of NPC in patients with cleft lip and palate. This finding reinforces the need for thorough surgical planning of the anterior region of the maxilla, in CBCT exams, by the dentist.

Anatomical Patterns of the Nasopalatine Canal and Incisive Foramen in an African Setting: A Cross-Sectional Study

Study Design: Descriptive cross-sectional. Objective: To determine the morphology and morphometry of the nasopalatine canal (NPC) and incisive foramen (IF) in an African population. Methods: Measurements of the NPC and the IF were carried out on 150 Cone-Beam computed tomography (CBCT) scans. The maxillary bone thickness anterior to the NPC was measured at 3 levels. Independent t-test and Chi-square test were performed to determine the presence of sexual dimorphism. Results: The presence of one Stenson's foramen was most prevalent. The mean length of NPC was 13.21 ± 3.25 mm with significantly longer canals in males. The most prevalent shape of NPC was cylindrical in sagittal view and a single canal in coronal view. The mean angulation of NPC was 118.42° to the horizontal plane. The average dimensions of the IF were 3.53 mm and 3.07 mm in the anteroposterior and mediolateral diameter, respectively, while the most common shape was round. The anterior maxillary bone was thicker in males and generally reduced in thickness from the anterior nasal spine superiorly towards the alveolar crest inferiorly. Conclusion: This study highlights the anatomical characteristics of the NPC and IF, with significant sexual dimorphism observed regarding the number of Stenson's foramina, length of NPC, shapes of the NPC and IF, as well as alveolar bone thickness anterior to NPC.

Morphological Characteristics of the Nasopalatine Canal and the Relationship with the Anterior Maxillary Bone—A Cone Beam Computed Tomography Study

The aim of this study was to evaluate the interconnection between the type of nasopalatine canal (NPC) and morphometric characteristics of the anterior maxilla. The investigation involved 113 subjects, and the morphometric parameters were obtained using cone beam computed tomography (CBCT). NPC shapes were classified into four types: banana-, hourglass-, cylindrical-, and funnel-shaped (distribution of approximately 9, 25, 31, and 35%, respectively). The analysis revealed that the NPC shape was significantly connected with the morphometric properties of anterior maxilla horizontal dimensions. In general, a banana-shaped NPC was accompanied with an overall reduction in anterior maxilla diameters when compared to other NPC shapes, with no significant difference between the other three NPC shapes. Furthermore, the morphometric characteristics that depend on NPC shape at the sagittal cross-section were significantly correlated with diameters of the incisive foramen, nasal foramen, and NPC length. According to the results of our study, it seems that the presented analyses of morphometric data may allow useful insight into the algorithms of various interconnections between the measures obtained in the region of the anterior maxilla, which could be of interest for a time rationale approach when planning some surgical procedures, such as immediate dental implant placement planning.

Morphological Characteristics of the Nasopalatine Canal and the Relationship with the Anterior Maxillary Bone-A Cone Beam Computed Tomography Study

The aim of this study was to evaluate the interconnection between the type of nasopalatine canal (NPC) and morphometric characteristics of the anterior maxilla. The investigation involved 113 subjects, and the morphometric parameters were obtained using cone beam computed tomography (CBCT). NPC shapes were classified into four types: banana-, hourglass-, cylindrical-, and funnel-shaped (distribution of approximately 9, 25, 31, and 35%, respectively). The analysis revealed that the NPC shape was significantly connected with the morphometric properties of anterior maxilla horizontal dimensions. In general, a banana-shaped NPC was accompanied with an overall reduction in anterior maxilla diameters when compared to other NPC shapes, with no significant difference between the other three NPC shapes. Furthermore, the morphometric characteristics that depend on NPC shape at the sagittal cross-section were significantly correlated with diameters of the incisive foramen, nasal foramen, and NPC length. According to the results of our study, it seems that the presented analyses of morphometric data may allow useful insight into the algorithms of various interconnections between the measures obtained in the region of the anterior maxilla, which could be of interest for a time rationale approach when planning some surgical procedures, such as immediate dental implant placement planning.

Palatal temporary skeletal anchorage devices (TSADs): What to know and how to do?

OBJECTIVES

Since palatal temporary skeletal anchorage devices (TSADs) have become important tools for orthodontic treatment, this narrative review was aimed to provide an updated and integrated guidelines for the clinical application of palatal TSADs.

SETTING AND SAMPLE POPULATION

A narrative review article including researches on palatal TSADs in orthodontics related to anatomy, success rate and clinical application.

MATERIALS AND METHODS

The anatomical characteristics, success rate and its consideration factors and clinical application of palatal TSADs based on the direction of tooth movement were evaluated.

RESULTS

To improve the stability of TSADs, hard tissue factors such as bone depth, cortical bone thickness, bone density and soft tissue thickness were evaluated. Anatomically risky structures, including the nasopalatine foramen, canal and the greater palatine foramen, nerve, vessel need to be identified before placement. The success rate of palatal TSADs was greater than that of the buccal inter-radicular space. Palatal TSADs have been used for various purposes because they can control tooth movement in all directions and, three-dimensionally; their applications include the retraction of anterior teeth, protraction of posterior teeth, distalization, intrusion, expansion and constriction. They can be applied directly or indirectly to the lingual arch or transpalatal arch. Design modifications using splinted 2 miniscrews have been suggested.

CONCLUSION

Palatal TSADs allow clinicians to perform minimally invasive and easy placement with good stability by understanding the anatomical characteristics of the palatal region, and they show good control over 3-dimensional tooth movements in various clinical cases.

Topographical variations of the incisive canal and nasopalatine duct in human fetuses

The incisive canal for nerves and vessels is generally thought to run along a suture between the incisive bone (IN) and maxilla. In contrast, there was a report saying the canal passes through the IN or primary palate in human fetuses. Examination of sagittal and frontal sections from 69 fetuses (31 of gestational age [GA] 9-15 weeks and 38 of GA 26-34 weeks) showed that the canal often penetrated the IN at the nasal half of its course and that, in other fetuses, the canal penetrated the IN along its entire course, irrespective of involvement of the nasopalatine duct. Canals developing in and corresponding to parts of the suture resulted in partial enlargement of the thin and tight sutures, which contained loose tissue, vessels, nerves and even a duct. Small processes of the IN were identified as upper irregular parts continuous with inferior main masses of bone in frontal sections but as bone fragments in sagittal sections. In some sections, a thin layer of the maxilla along the canal covered the medial or inferior aspect of the IN. Therefore, the incisive canal with or without duct exhibited a spectrum of variations in topographical relation to the IN-maxillary border. Because the primitive oronasal communication passes through the suture, the nasopalatine duct may have originated from the secondary developed elongation of the nasal epithelium at midterm. A large incisive fossa along the midline on the oral surface of the palate might make a macroscopic finding of variants difficult even in adults.

Contact of the incisive canal and upper central incisors causing root resorption after retraction with orthodontic mini-implants: A CBCT study

OBJECTIVES

To explore risk factors for contact between the incisive canal (IC) and upper central incisors (U1) and to evaluate the relationship between contact and root resorption using cone-beam computer tomography (CBCT).

MATERIALS AND METHODS

This retrospective study used CBCT data of 33 patients treated by a senior orthodontist. Anterior teeth were retracted with mini-implants, and CBCT scans were taken before and after retraction. IC height and width, U1 lingual movement, and U1-IC distance and root length decrease were compared between contact and noncontact groups.

RESULTS

Sixteen U1 roots in 11 patients touched the IC. The contact group had lower positioned ICs (2.86 ± 1.10 mm) than the noncontact group (4.07 ± 1.72 mm). The middle of the U1 roots showed more lingual movement to ICs in the contact group (2.30 ± 1.20 mm) than in the noncontact group (1.07 ± 1.16 mm). Right central incisors were closer to the IC than were the left. Root length decreased significantly more in the contact group (2.63 ± 0.93 mm) than in the noncontact group (1.14 ± 0.83 mm).

CONCLUSIONS

There is a risk for the U1 root to contact the IC during anterior retraction when the IC is lower positioned. This contact might cause external apical root resorption.

MDCT evaluation of nasopalatine canal morphometry and variations: An analysis of 100 patients

OBJECTIVE

The goal of this study was to investigate the possible variations in morphology of nasopalatine canal (NPC) morphometry depending on age, gender and absence of anterior incisors using multidetector row computed tomography (MDCT).

MATERIALS AND METHODS

A total of 100 patients (50 men, 50 women) with a mean age of 43.29±18.81 (SD) years (range: 18-90 years) who have undergone head MDTC were included into the study. Foramen nasalis diameter (P1), foramen incisivum diameter (P2), NPC length (P3), distance between buccal wall of incisive foramen and facial side of the buccal bone (P4), distances between buccal bone wall of NPC and facial side of buccal bone (P5), distance between mid-NPC buccal wall and facial side of buccal bone (P6), distance between buccal wall of NPC and the apex of anterior central incisors (P7) and NPC angle (P8) were measured. Formal variations in NPC were searched for. Differences in morphometric data were searched using Student t-test or Mann-Whitney test. Gender-based analysis of the variations was done with the χ² test. Pearson's test was used to search for correlation between morphometric data and age.

RESULTS

P1 was larger in men (3.72±1.41mm) than in women (3.07±1.34mm) (P<0.001). Similarly, P3 was larger in men (13.68±2.73mm) than in women (11.43±2.78mm) (P<0.001). No differences in the other NPC measurements (P2, P4, P5, P6, P7, P8) were found between men and women. Morphological variations in NPC (cylindrical, hourglass, banana shape, funnel shape, single canal, Y-type canal, parallel canal and others) were detected with frequencies ranging from 8 to 65.3%. A significant negative correlation was found between NCP measurements and patient age for P3 (r=-0.311; P=0.002), P4 (r=-0.267; P=0.007) and P8 (r=-0.318; P<0.001). New NPC variations, which were not reported before were found in 19% of our patients.

CONCLUSION

NPC shows myriad potential variations that have various prevalences. It is assumed that familiarity with these variations may help decrease the incidence of complications during facial or dental surgery.

Morphometric differences of nasopalatine canal based on 3D classifications: descriptive analysis on CBCT

PURPOSE

This descriptive retrospective study analyzed differences among sagittal, coronal and axial NC groups based on the dimensions of nasopalatine canal (NC), buccal bone plate (BBP) and palatal bone plate (PBP) to canal.

METHODS

Measurements were made on 224 CBCTs for NC, BBP and PBP on the three anatomic planes at three levels: level 1, when the incisive foramen is completely closed on the axial plane; level 2, at the midpoint of NC length (NCL) on the sagittal plane; and level 3, at the foramina of Stenson on the sagittal plane. ANOVA tests with post hoc tests were used. The intraclass correlation coefficient and Kappa test were used for evaluating the intraobserver agreement.

RESULTS

Regarding coronal classification, these significant differences were found: BBP length (BL)level 1 was lower for the two parallel canals group; PBP length (PL)level 1 was lower for single canal group; and NCL was lower for Y-type canal group. Regarding axial classification, these significant differences were found: LPlevel 1 was lower for 3.1-3 group; PBP width (PW)level 3 was the greatest for 3.1-3; and LPlevel 3 was lower for 1.1.

CONCLUSIONS

Presurgical evaluation with CBCT in premaxillae region should include analysis on coronal and axial planes and not only on sagittal plane seeing as morphometric differences were found on coronal and axial planes. Following the morphological coronal classification, two parallel canals presented a higher NCL, a higher LP and a lower LV at inferior edge of alveolar ridge.