Biodegradation of Poly(3-hydroxybutyrate) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Newly Isolated Penicillium oxalicum SS2 in Soil Microcosms and Partial Characterization of Extracellular Depolymerase

Biodegradation study of poly(hydroxybutyrate-co-hydroxyvalerate)/halloysite/oregano essential oil compositions in simulated soil conditions

The aim of this work was to evaluate the influence of halloysite clay nanoparticles - unmodified (Hal) and organically modified (mHal) - and oregano essential oil (OEO), used as an antimicrobial agent in active packaging, on the biodegradation behavior of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) films. Five samples were prepared by melt mixing using 3 wt% clay, and 8 wt% and 10.4 wt% OEO. PHBV compositions containing OEO presented the highest rate of biodegradation, achieving 46% of mass loss after aging for 12 weeks in simulated soil. The addition of clay nanoparticles reduced the polymer's biodegradation to 32%. The compositions containing OEO showed a rough and layered surface with visible cracks, indicating degradation occurring through layer-by-layer erosion from the surface. This degradation was confirmed by the chemical changes on the surface of all samples, with a slight decrease in molar masses. The composition containing 8 wt% OEO presented an increase in the crystallization degree as a result of the preferential consumption of amorphous phase, whereas for the compositions containing clay nanoparticles, both crystalline and amorphous regions were degraded at similar rates. Therefore, the combination of additives allows the biodegradation process of PHBV to be controlled for use in the production of active packaging.

Myco-remediation of plastic pollution: current knowledge and future prospects

To date, enumerable fungi have been reported to participate in the biodegradation of several notorious plastic materials following their isolation from soil of plastic-dumping sites, marine water, waste of mulch films, landfills, plant parts and gut of wax moth. The general mechanism begins with formation of hydrophobin and biofilm proceding to secretion of specific plastic degarding enzymes (peroxidase, hydrolase, protease and urease), penetration of three dimensional substrates and mineralization of plastic polymers into harmless products. As a result, several synthetic polymers including polyethylene, polystyrene, polypropylene, polyvinyl chloride, polyurethane and/or bio-degradable plastics have been validated to deteriorate within months through the action of a wide variety of fungal strains predominantly Ascomycota (Alternaria, Aspergillus, Cladosporium, Fusarium, Penicillium spp.). Understanding the potential and mode of operation of these organisms is thus of prime importance inspiring us to furnish an up to date view on all the presently known fungal strains claimed to mitigate the plastic waste problem. Future research henceforth needs to be directed towards metagenomic approach to distinguish polymer degrading microbial diversity followed by bio-augmentation to build fascinating future of waste disposal.

Purification and characterization of extracellular PHB depolymerase enzyme from Aeromonas caviae Kuk1-(34) and their biodegradation studies with polymer films

PHB depolymerase enzymes are able to breakdown the PHB polymers and thereby get significant economic value in the bioplastics industry and for bioremediation as well. This study shows the purification of novel extracellular PHB depolymerase enzyme from Aeromonas caviae Kuk1-(34) using dialysis followed by gel filtration and HPLC. The purification fold and yield after HPLC were 45.92 and 27.04%, respectively. HPLC data showed a single peak with a retention time of 1.937 min. GC-MS analysis reveals the presence of three compounds, of which 1-Dodecanol was found to be most significant with 54.48% area and 8.623-min retention time (RT). The molecular weight of the purified enzyme was obtained as 35 kDa with Km and apparent Vmax values of 0.769 mg/mL and 1.89 U/mL, respectively. The enzyme was moderately active at an optimum temperature of 35 °C and at pH 8.0. The stability was detected at pH 7.0-9.0 and 35-45 °C. Complete activity loss was observed with EDTA, SDS, Tween-20 at 5 mM and with 0.1% Triton X 100. A biodegradation study of commercially available biodegradable polymer films was carried out in a liquid medium and in soil separately with pure microbial culture and with purified enzyme for 7, 14, 28, and 49 consecutive days. In a liquid medium, with a pure strain of Aeromonas caviae Kuk1-(34), the maximum degradation (89%) was achieved on the PHB film, while no changes were observed with other polymer films. With purified enzyme in the soil, 71% degradation of the PHB film was noticed, and it was only 18% in the liquid medium. All such weight analysis were confirmed by SEM images where several holes, pits, grooves, crest, and surface roughness are clearly observed. Our results demonstrated the potential utility of Aeromonas caviae Kuk1-(34) as a source of extracellular PHB depolymerase capable of degrading PHB under a wide range of natural/ lab conditions.

Relation of 3HV fraction and thermomechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by Azotobacter vinelandii OP

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has attracted substantial attention as a promising material for industrial applications. In this study, different PHBV films with distinct 3-hydroxyvalerate (3HV) contents produced by Azotobacter vinelandii OP were evaluated. The 3HV fraction ranged from 18.6 to 36.7 mol%, and the number-average molecular weight (Mn) was between 238 and 434 kDa. In the bioreactor, a 3HV fraction (36.7 mol%) and an Mn value of 409 kDa were obtained with an oxygen transfer rate (OTR) of 12.5 mmol L-1 h-1. Thermal analysis measurements showed decreased melting (Tm) and glass transition (Tg) temperatures, and values with relatively high 3HV fractions indicated improved thermomechanical properties. The incorporation of the 3HV fraction in the PHBV chain improved the thermal stability of the films, reduced the polymer Tm, and affected the tensile strength. PHBV film with 36.7 mol% 3HV showed an increase in its tensile strength (51.8 MPa) and a decrease in its Tm (170.61 °C) compared with PHB. Finally, scanning electron microscopy (SEM) results revealed that the PHBV film with 32.8 mol% 3HV showed a degradation upon contact with soil, water, or soil bacteria, showing more porous surfaces after degradation. The latter phenomenon indicated that thermomechanical properties played an important role in biodegradation.

Zinc and cadmium change the metabolic activities and vegetable cellulose degradation of Bacillus cellulasensis in vegetable soils

Bacillus cellulasensis Zn-B isolated from vegetable soil was highly adaptable to Zinc (Zn) and Cadmium (Cd). Cd, but not Zn, adversely affected the total protein spectrum and functional groups of Bacillus cellulasensis Zn-B. Up to 31 metabolic pathways and 216 metabolites of Bacillus cellulasensis Zn-B were significantly changed by Zn and Cd (Zn&Cd). Some metabolic pathways and metabolites related to functional groups of sulfhydryl (-SH) and amine (-NH-) metabolism were enhanced by Zn&Cd addition. The cellulase activity of Bacillus cellulasensis Zn-B was up to 8.58 U mL^-1, increased to 10.77 U mL^-1 in Bacillus cellulasensis Zn-B + 300 mg L^-1 Zn, and maintained at 6.13 U mL^-1 in Bacillus cellulasensis Zn-B + 50 mg L^-1 Cd. The vegetables' cellulose content was decreased by 25.05-52.37% and 40.28-70.70% under the action of Bacillus cellulasensis Zn-B and Bacillus cellulasensis Zn-B + 300 mg L^-1 Zn. Those results demonstrated that Zn could significantly enhance cellulase activity and biodegradability of Bacillus cellulasensis Zn-B to vegetable cellulose. Bacillus cellulasensis Zn-B can survive in vegetable soil accumulated with Zn&Cd. The tolerance concentration and adsorption capacity of Bacillus cellulasensis Zn-B to Zn were up to 300 mg L^-1 and 56.85%, indicating that Bacillus cellulasensis Zn-B acting as a thermostability biological agent had an essential advantage in accelerating the degradation of discarded vegetables by Zn and were beneficial to maintain organic matter content of vegetable soil.

Isolation and optimization of extracellular PHB depolymerase producer Aeromonas caviae Kuk1-(34) for sustainable solid waste management of biodegradable polymers

Bioplastics, synthesized by several microbes, accumulates inside cells under stress conditions as a storage material. Several microbial enzymes play a crucial role in their degradation. This research was carried to test the biodegradability of poly-β-hydroxybutyrate (PHB) utilizing PHB depolymerase, produced by bacteria isolated from sewage waste soil samples. Potent PHB degrader was screened based on the highest zone of hydrolysis followed by PHB depolymerase activity. Soil burial method was employed to check their degradation ability at different incubation periods of 15, 30, and 45 days at 37±2°C, pH 7.0 at 60% moisture with 1% microbial inoculum of Aeromonas caviae Kuk1-(34) (MN414252). Without optimized conditions, 85.76% of the total weight of the PHB film was degraded after 45 days. This degradation was confirmed with Fourier-transform infrared spectroscopy (FTIR) and Scanning electron microscope (SEM) analysis. The presence of bacterial colonies on the surface of the degraded film, along with crest, holes, surface erosion, and roughness, were visible. Media optimization was carried out in statistical mode using Plackett Burman (PB) and Central Composite Design (CCD) of Response Surface Methodology (RSM) by considering ten different factors. Analysis of Variance (ANOVA), Pareto chart, response surface plots, and F-value of 3.82 implies that the above statistical model was significant. The best production of PHB depolymerase enzyme (14.98 U/mL) was observed when strain Kuk1-(34) was grown in a media containing 0.1% PHB, K₂HPO₄ (1.6 gm/L) at 27 ℃ for seven days. Exploiting these statistically optimized conditions, the culture was found to be a suitable candidate for the management of solid waste, where 94.4% of the total weight of the PHB film was degraded after 45 days of incubation.

Impact of Bis-O-dihydroferuloyl-1,4-butanediol Content on the Chemical, Enzymatic and Fungal Degradation Processes of Poly(3-hydroxybutyrate)

Poly-β-hydroxybutyrate (PHB) is a very common bio-based and biocompatible polymer obtained from the fermentation of soil bacteria. Due to its important crystallinity, PHB is extremely brittle in nature, which results in poor mechanical properties with low extension at the break. To overcome these issues, the crystallinity of PHB can be reduced by blending with plasticizers such as ferulic acid derivatives, e.g., bis-O-dihydroferuloyl-1,4-butanediol (BDF). The degradation potential of polymer blends of PHB containing various percentages (0, 5, 10, 20, and 40 w%) of BDF was investigated through chemical, enzymatic and fungal pathways. Chemical degradation revealed that, in 0.25 M NaOH solution, the presence of BDF in the blend was necessary to carry out the degradation, which increased as the BDF percentage increased. Whereas no enzymatic degradation could be achieved in the tested conditions. Fungal degradation was achieved with a strain isolated from the soil and monitored through imagery processing. Similar to the chemical degradation, higher BDF content resulted in higher degradation by the fungus.

Polyhydroxyalkanoates (PHAs) degradation by the newly isolated marine Bacillus sp. JY14

Polyhydroxyalkanoates (PHAs) are bioplastic substitutes for petroleum-derived plastics that may help to reduce the increasing environmental impact of plastic pollution. Among them, polyhydroxybutyrate (PHB) is a promising biopolymer, incentivizing many researchers to search for PHB-producing and PHB-degrading bacteria for improved PHB utilization. Many novel PHB-producing microorganisms have been discovered; however, relatively few PHB-degrading bacteria have been identified. Six PHB-degrading bacteria were found in marine soil and investigated their PHB-degrading abilities under various temperature and salinity conditions using solid-media based culture. Finally, thermotolerant and halotolerant PHB-degrader Bacillus sp. JY14 was selected. PHB degradation was confirmed by monitoring changes in the physical and chemical properties of PHB films incubated with Bacillus sp. JY14 using scanning electron microscopy, Fourier-transform infrared spectroscopy, and gel permeation chromatography. Further, PHB degradation ability of Bacillus sp. JY14 was measured in liquid culture by gas chromatography. After 14 days of cultivation with PHB film, Bacillus sp. JY14 achieved approximately 98% PHB degradation. Applying various bioplastics to assess the bacteria's biodegradation capabilities, the result showed that Bacillus sp. JY14 could also degrade P(3HB-co-4HB) and P(3HB-co-3HV). Overall, this study identified a thermotolerant and halotolerant bacteria capable of PHB degradation under solid and liquid conditions. These results suggest that this bacteria could be utilized to degrade various PHAs.

Microbial degradation of polyhydroxybutyrate with embedded polyhexamethylene guanidine derivatives

The aim of this study was to isolate biofilm-forming bacteria that are capable of degrading polyhydroxybutyrate (PHB) with polyhexamethylene guanidine (PHMG) derivatives. The three types of derivatives incorporated in PHB and their concentration affected the biodegradability of the tested films in both water and compost. The PHMG derivative granular polyethylene wax at the highest concentration significantly inhibited BOD in both environments. At the same time, in water, PHB with PHMG stearate at 1% concentration was also found to inhibit biodegradation but to a lesser extent than PHMG polyethylene wax granulate. Analyzing the values of biofilm abundance and their hydrolytic activity in water, low concentrations of PHMG derivatives (0.2 and 0.6%) slightly inhibited biofilm abundance on the surface of the tested composites. Only granular polyethylene wax PHMG (at 1% concentration) significantly reduced biofilm formation and hydrolase activity in the compost to the greatest extent. Bacteria from biofilm were isolated and identified. Based on the 16S rRNA gene sequence, the strains belong to Bacillus toyonensis HW1 and Variovorax boronicumulans HK3. Introduction of the tested isolates to the environment can enhance composites degradation. However, this requires further research.