Cell-culture compatible silk fibroin scaffolds concomitantly patterned by freezing conditions and salt concentration

Lignin-Based Nanoparticles as Both Structural and Active Elements in Self-Assembling and Self-Healing Multifunctional Hydrogels for Chronic Wound Management

Efficient wound healing is feasible when the dressing materials simultaneously target multiple factors causing wound chronicity, such as deleterious proteolytic and oxidative enzymes and bacterial infection. Herein, entirely bio-based multifunctional self-assembled hydrogels for wound healing were developed by simply mixing two biopolymers, thiolated hyaluronic acid (HA-SH) and silk fibroin (SF), with lignin-based nanoparticles (NPs) as both structural and functional elements. Sono-enzymatic lignin modification with natural phenolic compounds results in antibacterial and antioxidant phenolated lignin nanoparticles (PLN) capable of establishing multiple interactions with both polymers. These strong and dynamic polymer-NP interactions endow the hydrogels with self-healing and shear-thinning properties, and pH-responsive NP release is triggered at neutral to alkaline pH (7-9). Despite being a physically crosslinked hydrogel, the material was stable for at least 7 days, and its mechanical and functional properties can be tuned depending on the polymer and NP concentration. Furthermore, human skin cells in contact with the nanocomposite hydrogels for 7 days showed more than 93% viability, while the viability of clinically relevant Staphylococcus aureus and Pseudomonas aeruginosa was reduced by 99.7 and 99.0%, respectively. The hydrogels inhibited up to 52% of the activity of myeloperoxidase and matrix metalloproteinases, responsible for wound chronicity, and showed a strong antioxidant effect, which are crucial features promoting wound healing.

Processing Strategies to Obtain Highly Porous Silk Fibroin Structures with Tailored Microstructure and Molecular Characteristics and Their Applicability in Water Remediation

The present work reports on the control of silk fibroin (SF) porous structures performance through various processing methods. The study includes the analysis of two dissolving techniques (CaCl₂/H₂O/EtOH ternary and LiBr/H₂O binary solutions), three regeneration methods (gelation, lyophilization and gas foaming) and one post-processing (EtOH). In all the cases, followed steps lead to SF structures with porosity values above 94% and large surface areas. Also, results about samples microstructure, secondary organization, crystallinity and water behavior, reveal a direct correlation between processing and SF properties. Thanks to the achieved progress, the SF varying porous structures were evaluated for metalloids (As⁵⁺ and As³⁺) and heavy metals (Cr⁶⁺ and Cr³⁺) adsorption, observing a direct relationship between samples processing and ionic species adsorption ability. Thus, it is shown that the control of the properties of SF based porous structures through processing, represents a suitable and ecofriendly approach for the development of bio-based materials for environmental applications.

Silk industry waste protein: isolation, purification and fabrication of electrospun silk protein nanofibers as a possible nanocarrier for floating drug delivery

Amongst assorted regio-selective and targeted oral drug delivery strategies accepted for the gastro-retentive drug delivery system (GRDDS), the floating drug delivery system (FDDS) holds a major share as clinically accepted formulations. The major objective of the present investigation was to explore the silk industry waste protein, silk fibroin (SF) as a possible electrospun nanocarrier for the FDDS. In a nutshell, electrospinning (ES) is one of the flexible and astonishing strategies for the fabrication of porous electrospun nanofibers (NFs), which offers the potential to amend the floating profile, dissolution rate, solubility, and release patterns of the drug, etc as per compendial requirements. Looking at the prospects of floating SF-NFs preparation, we have isolated and lyophilized the SF from industrial waste cocoons and prepared drug-loaded SF single polymer nanofibers (SPN). Lafutidine (LF) being a good candidate for GRDDS selected as a model drug, which is an excellent proton pump inhibitor, mainly used in the treatment of gastric ulcers. Finally, the obtained LF loaded SF-NFs (LF-SF-NFs) were successfully analyzed for physicochemical characteristics, porosity, swelling index, antioxidant activity, mucoadhesion strength, floating properties, enzymatic degradation, and accelerated stability study, etc. Further, these LF-SF-NFs were evaluated for percent drug content, weight variation, in-vitro dissolution in 0.1 N hydrochloric acid (HCl, pH:1.2) and fasted state simulated gastric fluid (FSSGF), and accelerated stability study. It has shown significant floating time >18 h, about 99% ± 0.58% floating buoyancy with sustained release up to 24 h. LF-SF-NFs showed good compatibility, entrapment efficiency, antioxidant activity, mucoadhesion strength, enzymatic degradation, and long term stability. Soon, the essential floating and drug release profiles can claim single polymer (SF) based electrospun protein NFs as a possible novel oral nanocarrier for FDDS.

Synthesis of a photocurable acrylated poly(ethylene glycol)-co-poly(xylitol sebacate) copolymers hydrogel 3D printing ink for tissue engineering

Photocurable hydrogel scaffolds for tissue engineering must have excellent biocompatibility, tunable mechanical characteristics, and be biodegradable at a controllable rate. Hydrogels developed as ink for 3D printing require several other properties such as optimal viscosity and shorter photocrosslinking time to ensure continuous extrusion and to avoid untimely collapse of the printed structure. Here, a novel photocurable hydrogel made of acrylated poly(ethylene glycol)-co-poly(xylitol sebacate) (PEXS-A) is developed for tissue engineering and 3D printing applications. Synthesis of PEXS-A hydrogel with equilibrated water content above 90% is achieved via a quick and facile photopolymerization process. Changing the acrylation ratio of the PEXS-A hydrogel has an impact on its crosslinking density, mechanical properties and degradation rate, thus highlighting PEXS-A tunability. PEXS-A could be employed as ink as demonstrated by the 3D printing of a 30-layers cubic grid with high structural integrity. Furthermore, 3T3 fibroblast cells encapsulated into PEXS-A during photocrosslinking maintain a viability of 93.76% after seven days, which showed the good biocompatibility of this novel hydrogel. These results indicate that PEXS-A hydrogel could have multiple applications including as 3D printing ink and as tissue engineering scaffold.

A novel acrylated poly(ethylene glycol)-co-poly(xylitol sebacate) (PEXS-A) hydrogel for 3D printing ink and cell encapsulation for tissue engineering application.

Layers and Multilayers of Self-Assembled Polymers: Tunable Engineered Extracellular Matrix Coatings for Neural Cell Growth

Growing primary cells and tissue in long-term cultures, such as primary neural cell culture, presents many challenges. A critical component of any environment that supports neural cell growth in vivo is an appropriate 2-D surface or 3-D scaffold, typically in the form of a thin polymer layer that coats an underlying plastic or glass substrate and aims to mimic critical aspects of the extracellular matrix. A fundamental challenge to mimicking a hydrophilic, soft natural cell environment is that materials with these properties are typically fragile and are difficult to adhere to and stabilize on an underlying plastic or glass cell culture substrate. In this review, we highlight the current state of the art and overview recent developments of new artificial extracellular matrix (ECM) surfaces for in vitro neural cell culture. Notably, these materials aim to strike a balance between being hydrophilic and soft while also being thick, stable, robust, and bound well to the underlying surface to provide an effective surface to support long-term cell growth. We focus on improved surface and scaffold coating systems that can mimic the natural physicochemical properties that enhance neuronal survival and growth, applied as soft hydrophilic polymer coatings for both in vitro cell culture and for implantable neural probes and 3-D matrixes that aim to enhance stability and longevity to promote neural biocompatibility in vivo. With respect to future developments, we outline four emerging principles that serve to guide the development of polymer assemblies that function well as artificial ECMs: (a) design inspired by biological systems and (b) the employment of principles of aqueous soft bonding and self-assembly to achieve (c) a high-water-content gel-like coating that is stable over time in a biological environment and possesses (d) a low modulus to more closely mimic soft, compliant real biological tissue. We then highlight two emerging classes of thick material coatings that have successfully captured these guiding principles: layer-by-layer deposited water-soluble polymers (LbL) and silk fibroin (SF) materials. Both materials can be deposited from aqueous solution yet transition to a water-insoluble coating for long-term stability while retaining a softness and water content similar to those of biological materials. These materials hold great promise as next-generation biocompatible coatings for tissue engineers and for chemists and biologists within the biomedical field.

Harnessing Hierarchical Nano- and Micro-Fabrication Technologies for Musculoskeletal Tissue Engineering

Cells within a tissue are able to perceive, interpret and respond to the biophysical, biomechanical, and biochemical properties of the 3D extracellular matrix environment in which they reside. Such stimuli regulate cell adhesion, metabolic state, proliferation, migration, fate and lineage commitment, and ultimately, tissue morphogenesis and function. Current scaffold fabrication strategies in musculoskeletal tissue engineering seek to mimic the sophistication and comprehensiveness of nature to develop hierarchically assembled 3D implantable devices of different geometric dimensions (nano- to macrometric scales) that will offer control over cellular functions and ultimately achieve functional regeneration. Herein, advances and shortfalls of bottom-up (self-assembly, freeze-drying, rapid prototype, electrospinning) and top-down (imprinting) scaffold fabrication approaches, specific to musculoskeletal tissue engineering, are discussed and critically assessed.

Silk fibroin sponges with cell growth-promoting activity induced by genetically fused basic fibroblast growth factor

Transgenic silkworm technology has enabled the biological properties of silk fibroin protein to be altered by fusion to recombinant bioactive proteins. However, few studies have reported the fabrication of genetically modified fibroin proteins into three-dimensional spongy structures to serve as scaffolds for tissue engineering. We generated a transgenic silkworm strain that produces fibroin fused to basic fibroblast growth factor (bFGF) and processed the fibroin into a spongy structure using a simple freeze/thaw method. NIH3T3 mouse embryonic fibroblasts grown on bFGF-fused fibroin sponges proliferated and spread out well, showing half the population doubling time of cells cultured on wild-type fibroin sponges. Furthermore, the number of primary rabbit articular chondrocytes growing on bFGF-fused fibroin sponges was around five-times higher than that of the wild-type control at 3-days post cell-seeding. As the physical properties of wild-type and bFGF-fused fibroin sponges were almost identical, it is suggested that bFGF fused to fibroin retained its biological activity, even after the bFGF-fused fibroin was fabricated into the spongy structure. The bFGF-fused fibroin sponge has the potential for widespread application in the field of tissue engineering, and the method of fabricating this structure could be applicable to other recombinant bioactive fibroin proteins.

Self-assembly of silk-collagen-like triblock copolymers resembles a supramolecular living polymerization

We produced several pH-responsive silk-collagen-like triblocks, one acidic and two alkaline. At pH values where the silk-like block is uncharged the triblocks self-assemble into filaments. The pH-induced self-assembly was examined by atomic force microscopy, light scattering, and circular dichroism. The populations of filaments were found to be very monodisperse, indicating that the filaments start to grow from already present nuclei in the sample. The growth then follows pseudo-first-order kinetics for all examined triblocks. When normalized to the initial concentration, the growth curves of each type of triblock overlap, showing that the self-assembly is a generic process for silk-collagen-silk triblocks, regardless of the nature of their chargeable groups. The elongation speed of the filaments is slow, due to the presence of repulsive collagen-like blocks and the limited number of possibilities for an approaching triblock to successfully attach to a growing end. The formation of filaments is fully reversible. Already present filaments can start growing again by addition of new triblocks. The structure of all filaments is very rich in β-turns, leading to β-rolls. The triblocks attain this structure only when attaching to a growing filament.