Synthesis of poly(styrene-co-methacrylic acid)-coated magnetite nanoparticles as effective adsorbents for the removal of crystal violet and Rhodamine B: a comparative study

Adsorptive Performance of Polypyrrole-Based KOH-Activated Carbon for the Cationic Dye Crystal Violet: Kinetic and Equilibrium Studies

The aim of this work was to investigate the adsorptive performance of the polypyrrole-based KOH-activated carbon (PACK) in the removal of the basic dye crystal violet (CV) using a batch adsorption system. The equilibrium data, obtained at different initial CV concentrations ( $C_0=50–500\text{mg}/\text{L}$ ) and temperatures (25–45°C), were interpreted using the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms, with the Langmuir model providing a better fit ( $R^2\ge 0.9997$ ) and a maximum adsorption capacity of 497.51 mg/g at 45°C. Under the examined conditions, the values of the thermodynamic parameters free energy, enthalpy, and entropy indicate a spontaneous, endothermic, and physisorption adsorption process. The kinetic data of the adsorption process were very well described by a pseudo-second-order model ( $R^2\ge 0.9996$ ). However, surface diffusion seems to be the main rate-controlling step. Thus, we concluded that PACK shows commercial potential for the removal of cationic dyes such as CV from industrial effluent.

Biogenic synthesis of MgO nanoparticles from different extracts (flower, bark, leaf) of Tecoma stans (L.) and their utilization in selected organic dyes treatment

The occurrence and influence of dyes-containing effluents are alarmingly serious; hence, the treatment of such wastewater needs to be undertaken. Here, we report the biosynthesis strategy and utilisation of MgO nanoparticles (MgO NPs) from distinct Tecoma stans (L.) plant extracts (flower, bark, and leaf). The FT-IR spectroscopy revealed the dominance of chemical bonds as well as functional groups on MgO NPs surfaces. For adsorption experiments, the impact of pH, contact time, concentration, and pH on uptake efficiency of congo red (CR) and crystal violet (CV) dyes were investigated and then optimized using response surface methodology and Box-Behnken design. Under the optimal conditions, 99.7% CR (at C_i = 9.33 mg/L, Dos = 0.22, pH = 7.9) and 90.8% CV (at C_i = 5.0 mg/L, Dos = 0.3, pH = 6.3) were attained. The maximum adsorption capacities were calculated from 89.24 to 150.49 mg/g, where MgO NPs derived from flower extract gave better adsorption efficiency than those from other extracts. Therefore, MgO NPs material from Tecoma stans (L.) flower extract is expected as a perspective adsorbent for the effective remediation of organic dyes.

Data on the removal of Optilan Blue dye from aqueous media using starch-coated green synthesized magnetite nanoparticles

In this data article, we present supplementary data related to the research article entitled "Starch-coated green synthesized magnetite nanoparticles for removal of textile dye Optilan Blue from aqueous media" Stan et al., 2019. Data interpretations are included in the related research article Stan et al., 2019. The synthesized starch-coated Fe3O4 nanoparticles (ST-coated Fe3O4 NPs) were analyzed by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) to illustrate the shape and surface coating of nanoparticles. Moreover, the Brunauer-Emmett-Teller (BET) technique was used to evidence starch deposition on magnetite nanoparticles. The obtained nanocomposites were used for adsorption of Optilan Blue (OB) in batch conditions and the optimum agitation speed and point of zero charge (pHpzc) were established. After OB adsorption on ST-coated Fe3O4 NPs, the nanocomposites were analyzed by transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The stability of starch coated Fe3O4 NPs in the acidic as well as alkaline pH was also evidenced by FTIR spectroscopy. In addition, to test the stability of ST-coated Fe3O4 NPs, leaching experiments were carried out. The experimental data were compared with isotherm and kinetic models in order to determine the most suitable for fitting.

Modified xanthan gum for crystal violet uptake: kinetic, isotherm, and thermodynamic behaviors

Modified xanthan gum (XG-AM-TTE) was employed as an adsorbent to study the adsorption behavior, thermodynamics and kinetics of crystal violet (CV) from an aqueous solution. Fourier transform infrared spectroscopy analysis indicates that the functional groups present in the adsorbent, such as carboxyl, ester and hydroxyl groups, are included on the external surface of the material, and these groups are potential active sites for interaction with CV. According to X-ray diffraction results, the structure of XG-AM-TTE after CV adsorption became more disordered, and the microstructure change is an indication of effective adsorption of CV to the surface, with CV becoming remarkably dispersed in the adsorbent according to the scanning electron microscopy observations. The adsorption kinetics and adsorption equilibrium were best described by the pseudo-second-order model and Freundlich isotherms, respectively. The thermodynamic parameters, as the Gibbs-free energy (ΔG), enthalpy (ΔH) and entropy (ΔS), indicated that the adsorption is a spontaneous, endothermic and entropy increase process. The maximum adsorption capacity of XG-AM-TTE was 183 ± 12 mg/g, suggesting that XG-AM-TTE is an efficient adsorbent.