Polyaniline-TiO2-based photocatalysts for dyes degradation

Recent advancements in sustainable synthesis of zinc oxide nanoparticles using various plant extracts for environmental remediation

The sustainable synthesis of zinc oxide nanoparticles (ZnO-NPs) using plant extracts has gained significant attention in recent years due to its eco-friendly nature and potential applications in numerous fields. This synthetic approach reduces the reliance on non-renewable resources and eliminates the need for hazardous chemicals, minimizing environmental pollution and human health risks. These ZnO-NPs can be used in environmental remediation applications, such as wastewater treatment or soil remediation, effectively removing pollutants and improving overall ecosystem health. These NPs possess a high surface area and band gap of 3.2 eV, can produce both OH° (hydroxide) and O2-° (superoxide) radicals for the generation of holes (h+) and electrons (e-), resulting in oxidation and reduction of the pollutants in their valence band (VB) and conduction band (CB) resulting in degradation of dyes (95-100% degradation of MB, MO, and RhB dyes), reduction and removal of heavy metal ions (Cu2+, Pb2+, Cr6+, etc.), degradation of pharmaceutical compounds (paracetamol, urea, fluoroquinolone (ciprofloxacin)) using photocatalysis. Here, we review an overview of various plant extracts used for the green synthesis of ZnO NPs and their potential applications in environmental remediation including photocatalysis, adsorption, and heavy metal remediation. This review summarizes the most recent studies and further research perspectives to explore their applications in various fields.

Charge transfer in TiO2-based photocatalysis: fundamental mechanisms to material strategies

Semiconductor-based photocatalysis has attracted significant interest due to its capacity to directly exploit solar energy and generate solar fuels, including water splitting, CO2 reduction, pollutant degradation, and bacterial inactivation. However, achieving the maximum efficiency in photocatalytic processes remains a challenge owing to the speedy recombination of electron-hole pairs and the limited use of light. Therefore, significant endeavours have been devoted to addressing these issues. Specifically, well-designed heterojunction photocatalysts have been demonstrated to exhibit enhanced photocatalytic activity through the physical distancing of electron-hole pairs generated during the photocatalytic process. In this review, we provide a systematic discussion ranging from fundamental mechanisms to material strategies, focusing on TiO2-based heterojunction photocatalysts. Current efforts are focused on developing heterojunction photocatalysts based on TiO2 for a variety of photocatalytic applications, and these projects are explained and assessed. Finally, we offer a concise summary of the main insights and challenges in the utilization of TiO2-based heterojunction photocatalysts for photocatalysis. We expect that this review will serve as a valuable resource to improve the efficiency of TiO2-based heterojunctions for energy generation and environmental remediation.

Polyaniline-metal oxide coatings for biocidal applications: Mechanisms of activation and deactivation

Metal oxide (MO) coatings (e.g. TiO2, ZnO, and CuO) have shown great promise to inactivate pathogenic bacteria, maintain self-cleaning surfaces, and prevent infectious diseases spread via surface contact. Under light illumination, the antibacterial performance of photoactive MO coatings is determined by reactive oxygen species (ROS) generation. However, several drawbacks, such as photo-corrosion and rapid electron-hole recombination, hinder the ROS production of MO coatings and diminish their antibacterial efficiency. In this study, we employed polyaniline (PANI), an inexpensive and easy-to-synthesize conductive polymer, to fabricate polyaniline-metal oxide composite (PMC) films. The antibacterial performance of PMC films was tested using E. coli as the model bacterium and Lake Michigan water (LMW) as the background medium and revealed enhanced antibacterial performance relative to MO coatings alone (approximately 75-90 % kill of E. coli by PMC coatings in comparison to 20-40 % kill by MO coatings), which is explained by an increase in the ROS yields of PMC. However, with repeated use, the antibacterial performance of the PMC coatings is diminished due to deprotonation of the PANI in the neutral/slightly basic aqueous environment of LMW. Overall, PANI can enhance the antibacterial performance of MO coatings, but efforts need to be directed to preserve or regenerate PMC stability under environmental conditions and applications.

Evaluation of the performance of the compost plant for optimal operational evaluation

Composting is a municipal solid waste management strategy that can reduce municipal waste mixtures to diminish the volume and weight of disposable materials, decrease leachate emissions, recycle resources, and reduce the costs required for waste disposal. Today, the wave of consumerism in the current world and the advancement of technology has led to producing diversified waste around the globe, so the growth rate of all countries, including Iran, is increasing dramatically. This research was studied from a practical point of view for the first time in Karaj. We used a method based on a meta-heuristic algorithm to analyze the data. The results of these studies show that units that are part of large industries have a greater environmental approach than other smaller food industries because most of the smaller food industries have environmental experts or other findings; an environmental group is considered costly and troublesome. Therefore, the present research focuses on the thorough assessment of a compost plant's operational performance to achieve maximum efficiency and effectiveness. Technical, environmental, and economic viewpoints are all included in the assessment's multidimensional approach. Moreover, this case study of the Karaj compost factor summarizes the effectiveness of the method based on a meta-heuristic algorithm adopted for waste management. Therefore, it can be said that the root of the existing problems concerning the proper management of food industry waste in Karaj is due to the lack of environmental experts in the industry.

Photocatalytic performance of PANI modified TiO2: Degradation of refractory organic matter

Surface modification of TiO2 with polyaniline (PANI) conducting polymer has been used to achieve visible light photoresponse, thereby increasing solar photocatalytic activity. In this study, photocatalytic performances of PANI-TiO2 composites with different mole ratios were synthesized by the in situ chemical oxidation polymerization method and tested for the degradation of a model refractory organic matter (RfOM), namely humic acid in an aqueous medium under simulated solar irradiation in a comparative manner. Adsorptive interactions under dark conditions and interactions under irradiation were investigated as contributing factors to photocatalysis. Degradation of RfOM was monitored in terms of UV-vis parameters (Color436, UV365, UV280, and UV254) and fluorescence spectroscopic parameters as well as the mineralization extent by dissolved organic carbon contents. The presence of PANI exerted an enhancement in photocatalytic degradation efficiency compared to pristine TiO2. The synergistic effect was more pronounced in lower PANI ratios whereas higher PANI ratios reflected a retardation effect. Degradation kinetics were assessed by pseudo-first-order kinetic model. For all UV-vis parameters analyzed, highest and lowest rate constants (k) were attained in the presence of PT-14 (2.093 × 10-2 to 2.750 × 10-2 min-1) and PT-81 (5.47 × 10-3 to 8.52 × 10-3 min-1), respectively. Variations in selected absorbance quotients, i.e., A254/A436, A280/A436, and A253/A203, were distinctive and compared with respect to irradiation time and photocatalyst type. Upon use of PT-14, a steady decreasing profile with respect to irradiation time was attained for A253/A203 quotient as 0.76-0.61, followed by a rapid decrease to 0.19 in 120 min. The incorporation effect of PANI into TiO2 composite could be visualized in A280/A365 and A254/A365 quotients exhibiting an almost constant and parallel trend. As a general trend, decrease in the major fluorophoric intensity FIsyn,470 with photocatalysis was observed under extended irradiation conditions; however, an abrupt decline was remarkable in the presence of PT-14 and PT-18. Fluorescence intensity decrease correlated well with spectroscopic evaluation of rate constants. A thorough evaluation of spectroscopic parameters of UV-vis and fluorescence can provide significant information for practical applications in control of RfOM in water treatment.

Highly customized porous TiO2-PANI nanoparticles with excellent photocatalytic efficiency for dye degradation

The present work encompasses a simple strategy to synthesize highly porous TiO₂ by incorporating PANI polymer into the sol-gel chemistry of Titanium dioxide/Titanium (IV)-iso-propoxide (TiO₂/TTIP). A series of TiO₂ samples by varying wt.% of PANI, have been synthesized. A probable growth mechanism has been presented for the formation of a porous ginger-like nanostructure of TiO₂-PANI (TP). HRTEM images reveal that the particle size range is 6-16 nm for pristine TiO₂ and 5-13 nm for TP samples. XPS analysis confirms the presence of the hydrogen bonds in-between surface hydroxyl groups (Ti-OH) of TiO₂ and the protonated nitrogen of PANI. UV-visible absorption study reveals a small shift towards longer wavelength for TP8 sample than that of pristine TiO₂ (λ_max = 314 nm) as well as reduction in E_g value from 3.02 eV to 2.89 eV. FTIR results confirm the successful interaction of PANI and TiO₂. BJH and BET analysis confirms an increase of porosity in TP8 sample with an average pore volume of 0.36 cm³ g^-1. High photocatalytic activity (98.77%) towards Methylene blue dye degradation is observed for TP8 sample having 8 wt% of PANI and it is explained through the combined effect of structural porosity of TiO₂ and synergic effect of PANI. The K_appa value at pH 11 (0.01372 min^-1) is found to be 7.84-folds higher than that of the photocatalytic reaction at pH 3 (K_appa = 0.00175 min^-1). While pristine TiO₂ exhibits the minimum removal efficiency (89.57%) with K_appa of 0.00756 min^-1. K_appa value of catalysis reaction for TP8 is found to be almost 2-fold higher than pristine TiO₂. Quantum Yield value for TP8 is found to be 3.59 × 10^-4 molecules photon^-1. This high Quantum Yield value of present photocatalytic system explicates the low energy consumption for the treatment of textile dye pollutant. Additionally, STY value (1.79 × 10^-5 molecules photon^-1 mg^-1) confirms the outstanding mineralization strength of TP8 by a unit mass for high amounts of MB dye per unit time. Thus, the present study offers an excellent photocatalyst i.e., TP8 having 8 wt% of PANI for the degradation of MB dye.

Investigation of functional performance of treatment systems for textile wastewater in selected textile industries in Tanzania

Textile industrialization is an integral part of the economic growth in Tanzania. However, the corresponding wastewater from textile treatment processes consists of dyes and auxiliaries associated with acute toxicological impacts. This necessitates an investigation of the functional performance of the industrial treatment systems used before effluent discharge. The study primarily accesses the catalog of industrial dyes and the functionality of the treatment system at Arusha, Morogoro and Dar es Salaam vis-à-vis the effluent physicochemical properties. The analytical study reveals disperse (42%), vat (34%) and reactive (26%) as the most used industrial dyes. The physicochemical properties of the quantified wastewater reveal a significant amount of and phosphorus which was consequent to the high turbidity, biochemical oxygen demand (BOD) and chemical oxygen demand (COD) apart from the color at the different sampling points. Although the treatability of the wastewater was 90% efficient using an activated carbon system (237.33 ± 0.67 mg/L). Similarly, the use of aerated constructed wetlands shows efficiency in the remediation of the recalcitrant having a value of 12.13 ± 0.89^b mg/L (90%) and 13.22 ± 0.15^a mg/L (94%). Thereafter, needful recommendations were suggested based on the physicochemical properties of the textile wastewater and to improve the functionality of the treatment systems in the respective industries.

Biogenic Synthesis, Characterization, and Photocatalytic Evaluation of Pristine and Graphene-Loaded Zn50Mg50O Nanocomposites for Organic Dyes Removal

Algal biomass synthesised nanocomposites have a higher surface area and reusability advantages. This study aimed to synthesise and characterise ZnMgO and silica-supported graphene with ZnMgO (G-ZnMgO) nanocomposites from Kappaphycusalvarezii and evaluate their potential in the application of photocatalysis to remove Rhodamine-B (RhB) and methylene blue (MB) dyes from their aqueous medium by maximising the percentage removal using response surface methodology (RSM) modelling. Nanocomposites were synthesised and characterised by biogenic and instrumental (Powder X-ray diffraction (P-XRD), electron microscopic analysis (SEM and TEM), Fourier transform infrared spectroscopy (FTIR), Energy dispersive analysis of X-rays (EDAX). and UV-visible diffuse reflectance spectroscopy (UV-DRS)) methods, respectively; modelling predicted the optimal conditions to be photocatalyst dosage and contact time of 1 g/L and 90 min, respectively, to obtain maximum MB dye removal of 80% using G-ZnMgO. The results showed the best fit between experimental and RSM predicted values. Thus, the obtained results conclude that the algal biomass synthesised nanocomposites were found to be one of the potential photocatalysts for the removal of RhB and MB dyes from their aqueous solution.

Biosensors Based on Bio-Functionalized Semiconducting Metal Oxides

Immobilization of biomaterials is a very important task in the development of biofuel cells and biosensors. Some semiconducting metal-oxide-based supporting materials can be used in these bioelectronics-based devices. In this article, we are reviewing some functionalization methods that are applied for the immobilization of biomaterials. The most significant attention is paid to the immobilization of biomolecules on the surface of semiconducting metal oxides. The improvement of biomaterials immobilization on metal oxides and analytical performance of biosensors by coatings based on conducting polymers, self-assembled monolayers and lipid membranes is discussed.

Microorganism-Templated Nanoarchitectonics of Hollow TiO2-SiO2 Microspheres with Enhanced Photocatalytic Activity for Degradation of Methyl Orange

In this study, hollow SiO₂ microspheres were synthesized by the hydrolysis of tetraethyl orthosilicate (TEOS) according to the Stober process, in which Pichia pastoris GS 115 cells were served as biological templates. The influence of the preprocessing method, the TEOS concentration, the ratio of water to ethanol, and the aging time on the morphology of microspheres was investigated and the optimal conditions were identified. Based on this, TiO₂-SiO₂ microspheres were prepared by the hydrothermal process. The structures and physicochemical properties of TiO₂-SiO₂ photocatalysts were systematically characterized and discussed. The photocatalytic activity for the degradation of methyl orange (MO) at room temperature under Xe arc lamp acting as simulated sunlight was explored. The result showed that the as-prepared TiO₂-SiO₂ microspheres exhibited a good photocatalytic performance.

An Overview of Polymer-Supported Catalysts for Wastewater Treatment through Light-Driven Processes

In recent years, alarm has been raised due to the presence of chemical contaminants of emerging concern (CECs) in water. This concern is due to the risks associated with their exposure, even in small amounts. These complex compounds cannot be removed or degraded by existing technologies in wastewater treatment plants. Therefore, advanced oxidation processes have been studied, with the objective of developing a technology capable of complementing the conventional water treatment plants. Heterogenous photocatalysis stands out for being a cost-effective and environmentally friendly process. However, its most common form (with suspended catalytic particles) requires time-consuming and costly downstream processes. Therefore, the heterogeneous photocatalysis process with a supported catalyst is preferable. Among the available supports, polymeric ones stand out due to their favorable characteristics, such as their transparency, flexibility and stability. This is a relatively novel process; therefore, there are still some gaps in the scientific knowledge. Thus, this review article aims to gather the existing information about this process and verify which questions are still to be answered.

Conducting polymers/zinc oxide-based photocatalysts for environmental remediation: a review

The accessibility to clean water is essential for humans, yet nearly 250 million people die yearly due to contamination by cholera, dysentery, arsenicosis, hepatitis A, polio, typhoid fever, schistosomiasis, malaria, and lead poisoning, according to the World Health Organization. Therefore, advanced materials and techniques are needed to remove contaminants. Here, we review nanohybrids combining conducting polymers and zinc oxide for the photocatalytic purification of waters, with focus on in situ polymerization, template synthesis, sol-gel method, and mixing of semiconductors. Advantages include less corrosion of zinc oxide, less charge recombination and more visible light absorption, up to 53%.

Graphene Quantum Dots Improved "Caterpillar"-like TiO2 for Highly Efficient Photocatalytic Hydrogen Production

Photocatalytic water splitting for hydrogen production via heterojunction provides a convenient approach to solve the world crises of energy supply. Herein, graphene quantum dots modified TiO₂ hybrids (TiO₂-GQDs) with a “caterpillar”-like structure exhibit stronger light absorption in the visible region and an enhanced hydrogen production capacity of about 3.5-fold compared to the pristine TiO₂ caterpillar. These results inferred that the addition of GQDs drastically promotes the interfacial electron transfer from GQDs to TiO₂ through C–O–Ti bonds via the bonding between oxygen vacancy sites in TiO₂ and in-plane oxygen functional groups in GQDs. Using a “caterpillar”-like structure are expected to provide a new platform for the development of highly efficient solar-driven water splitting systems based on nanocomposite photocatalyst.

Synthesis and Characterization of Conducting PANDB/χ-Al2O3 Core-Shell Nanocomposites by In Situ Polymerization

Polyaniline doped with dodecylbenzenesulfonic acid/χ-aluminum oxide (PANDB/χ-Al2O3) conducting core-shell nanocomposites was synthesized via an in situ polymerization method in this study. PANDB was synthesized in the presence of dodecylbenzenesulfonic acid (DBSA), which functioned as a dopant and surfactant. The electrical conductivity of the conducting PANDB/χ-Al2O3 core-shell nanocomposite was approximately 1.7 × 10-1 S/cm when the aniline/χ-Al2O3 (AN/χ-Al2O3) weight ratio was 1.5. The transmission electron microscopy (TEM) results indicated that the χ-Al2O3 nanoflakes were thoroughly coated by PANDB to form the core-shell (χ-Al2O3-PANDB) structure. The TEM and field-emission scanning electron microscopy (FE-SEM) images of the conducting PANDB/χ-Al2O3 core-shell nanocomposites also indicated that the thickness of the PANDB layer (shell) could be increased as the weight ratio of AN/χ-Al2O3 was increased. In this study, the optimum weight ratio of AN/χ-Al2O3 was identified as 1.5. The conducting PANDB/χ-Al2O3 core-shell nanocomposite was then blended with water-based polyurethane (WPU) to form a conducting WPU/PANDB/χ-Al2O3 blend film. The resulting blend film has promising antistatic and electrostatic discharge (ESD) properties.