Chemical sensing with pulsed QC-DFB lasers operating at 15.6 micrometers

Extremely sensitive detection of NO₂ employing off-axis integrated cavity output spectroscopy coupled with multiple-line integrated absorption spectroscopy

We report on the development of a new sensor for NO₂ with ultrahigh sensitivity of detection. This has been accomplished by combining off-axis integrated cavity output spectroscopy (OA-ICOS) (which can provide large path lengths of the order of several kilometers in a small volume cell) with multiple-line integrated absorption spectroscopy (MLIAS) (where we integrate the absorption spectra over a large number of rotational-vibrational transitions of the molecular species to further improve the sensitivity). Employing an external cavity quantum cascade laser operating in the 1601-1670 cm⁻¹ range and a high-finesse optical cavity, the absorption spectra of NO₂ over 100 transitions in the R band have been recorded. From the observed linear relationship between the integrated absorption versus concentration of NO₂ and the standard deviation of the integrated absorption signal, we report an effective sensitivity of detection of approximately 28 ppt (parts in 10¹²) for NO₂ To the best of our knowledge, this is among the most sensitive levels of detection of NO₂ to date.

External cavity tunable quantum cascade lasers and their applications to trace gas monitoring

Since the first quantum cascade laser (QCL) was demonstrated approximately 16 years ago, we have witnessed an explosion of interesting developments in QCL technology and QCL-based trace gas sensors. QCLs operate in the mid-IR region (3-24 μm) and can directly access the rotational vibrational bands of most molecular species and, therefore, are ideally suited for trace gas detection with high specificity and sensitivity. These sensors have applications in a wide range of fields, including environmental monitoring, atmospheric chemistry, medical diagnostics, homeland security, detection of explosive compounds, and industrial process control, to name a few. Tunable external cavity (EC)-QCLs in particular offer narrow linewidths, wide ranges of tunability, and stable power outputs, which open up new possibilities for sensor development. These features allow for the simultaneous detection of multiple species and the study of large molecules, free radicals, ions, and reaction kinetics. In this article, we review the current status of EC-QCLs and sensor developments based on them and speculate on possible future developments.

Enhancement of trace gas detection by integrating wavelength modulated spectra across multiple lines

We describe and demonstrate a technique that enhances the sensitivity of a spectrometer for trace gas detection by employing wavelength modulation spectroscopy (WMS) and integrating the absolute value of the recorded spectra across multiple lines of the species. The sensitivity is further enhanced by conducting WMS with large modulation depths. This technique is demonstrated using a continuously tunable external cavity CW quantum cascade laser to record the second harmonic wavelength modulated spectra of NO(2) across the peak of the R-branch from 1629.5 to 1633.9 cm(-1). By integrating the absolute value of the resulting spectra, the detection sensitivity of NO(2) is improved by a factor of 40 compared to the sensitivity achieved using single-line WMS with the same apparatus. By using this technique, we achieve a sensitivity of approximately 6 parts in 10(9) (ppb) using a short-path cell (a 1 m absorption cell with two passes).

A sulfur hexafluoride sensor using quantum cascade and CO2 laser-based photoacoustic spectroscopy

The increase in greenhouse gas emissions is a serious environmental problem and has stimulated the scientific community to pay attention to the need for detection and monitoring of gases released into the atmosphere. In this regard, the development of sensitive and selective gas sensors has been the subject of several research programs. An important greenhouse gas is sulphur hexafluoride, an almost non-reactive gas widely employed in industrial processes worldwide. Indeed it is estimated that it has a radiative forcing of 0.52 W/m². This work compares two photoacoustic spectrometers, one coupled to a CO₂ laser and another one coupled to a Quantum Cascade (QC) laser, for the detection of SF₆. The laser photoacoustic spectrometers described in this work have been developed for gas detection at small concentrations. Detection limits of 20 ppbv for CO₂ laser and 50 ppbv for quantum cascade laser were obtained.

Enhanced sensitivity for the detection of trace gases using multiple line integrated absorption spectroscopy

We describe a technique that enhances the sensitivity of a spectrometer for trace gas detection employing an external cavity continuously tunable CW quantum cascade laser and integrating the absorption spectra across multiple lines of the species. We demonstrate the power of this method by continuously recording the absorption spectra of NO2 across the R branch from 1628.8 to 1634.5 cm(-1). By integrating the resulting spectra, the detection sensitivity of NO2 is improved by a factor of 15 compared to the sensitivity achieved using single line laser absorption spectroscopy with the same apparatus. This procedure offers much shorter data acquisition times for the real-time monitoring of trace gas species compared to adding repeated scans of the spectra to improve the signal-to-noise ratio.

Alternative method for gas detection using pulsed quantum-cascade-laser spectrometers

Pulsed quantum-cascade-laser (QCL) spectrometers are usually used to detect atmospheric gases with either the interpulse technique (short pulses, typically 5-20 ns) or the intrapulse technique (long pulses, typically 500-800 ns). Each of these techniques has many drawbacks, which we present. Particularly the gas absorption spectra are generally distorted. We demonstrate the possibility to use intermediate pulses (typically 50-100 ns) for gas detection using pulsed QCL spectrometers. IR spectra of ammonia recorded in the 10 microm region are presented in various conditions of pulse emission. These experiences demonstrate the large influence of the pulse shape on the recorded spectrum and the importance to use our alternative method for gas detection with pulsed QCL spectrometers.

Absorption and wavelength modulation spectroscopy of NO2 using a tunable, external cavity continuous wave quantum cascade laser

The absorption spectra and wavelength modulation spectroscopy (WMS) of NO(2) using a tunable, external cavity CW quantum cascade laser operating at room temperature in the region of 1625 to 1645 cm(-1) are reported. The external cavity quantum cascade laser enabled us to record continuous absorption spectra of low concentrations of NO(2) over a broad range (approximately 16 cm(-1)), demonstrating the potential for simultaneously recording the complex spectra of multiple species. This capability allows the identification of a particular species of interest with high sensitivity and selectivity. The measured spectra are in excellent agreement with the spectra from the high-resolution transmission molecular absorption database [J. Quant. Spectrosc. Radiat. Transfer 96, 139-204 (2005)]. We also conduct WMS for the first time using an external cavity quantum cascade laser, a technique that enhances the sensitivity of detection. By employing WMS, we could detect low-intensity absorption lines, which are not visible in the simple absorption spectra, and demonstrate a minimum detection limit at the 100 ppb level with a short-path absorption cell. Details of the tunable, external cavity quantum cascade laser system and its performance are discussed.

Ammonia detection by using quantum-cascade laser photoacoustic spectroscopy

A pulsed quantum-cascade distributed-feedback laser, temperature tunable from -41 degrees C to +31.6 degrees C, and a resonant differential photoacoustic detector are used to measure trace-gas concentrations to as low as 66 parts per 10(9) by volume (ppbv) ammonia at a low laser power of 2 mW. Good agreement between the experimental spectrum and the simulated HITRAN spectrum of NH3 is found in the spectral range between 1046 and 1052 cm(-1). A detection limit of 30 ppbv ammonia at a signal-to-noise ratio of 1 was obtained with the quantum-cascade laser (QCL) photoacoustic (PA) setup. Concentration changes of approximately 50 ppbv were detectable with this compact and versatile QCL-based PA detection system. The performance of the PA detector, characterized by the product of the incident laser power and the minimum detectable absorption coefficient, was 4.7 x 10-9 W cm(-1).

Characterization of a 10.3-microm pulsed DFB quantum cascade laser

We have measured the output parameters of a 10.3-microm pulsed distributed-feedback (DFB) quantum cascade (QC) laser manufactured by Alpes Lasers and intended for high-sensitivity detection of ammonia and ethylene. The laser beam was collimated with an AR-coated aspheric ZnSe lens with focal length of 11.6mm and clear aperture of 16.5mm. Near- and far-field distributions of the laser emission were recorded with an infrared imaging camera. The fast-and slow-axis laser beam divergences were measured to be 1.2 and 1.4 mrad (FWHM), respectively. The divergence was found to be increasing with injection current. An air-spaced Fabry-Perot interferometer with free spectral range of 0.05 cm(-1) was used to measure the frequency tuning rates of the laser. The laser was tuned by either heat sink temperature, injection current or pulse repetition rate with rates of approximately -8 x 10(-2)cm(-1)K(-1), -7 x 10(-2)cm(-1)A(-1) and -9 x 10(-4)cm(-1)kHz(-1), respectively. The laser frequency decreased linearly with a rate of 10(-2)cm(-1)ns(-1) ( approximately 300 MHzns(-1)) for laser pulses varied from 10 to 50 ns, and the frequency chirp rate was found to decrease for longer laser pulses.

Photo-acoustic measurements of gas and aerosol absorption with diode lasers

The results of designing multipurpose high-sensitive photo-acoustic (PA) detectors and their application to high-resolution diode laser spectroscopy of molecular gases, gas analysis, and aerosol absorption measurements are summarized in this paper. The hardware and software of the diode laser spectrometer with a Helmholtz resonant PA detector providing an absorption sensitivity limit of better than 10(-7)Wm(-1)Hz(-1/2) are described. A procedure is proposed for an experiment involving the measurements of the rotational structure of hot vibrational bands of molecules. The results of the application of the nonresonant PA cell with temporal resolution of signals to measurements of weak nonresonant absorption of gases and soot aerosols are presented, and the possibility of creating a broad-band PA laser diode aerosol-meter is discussed.

Signal processing and calibration procedures for in situ diode-laser absorption spectroscopy

Gas analyzers based on tunable diode-laser spectroscopy (TDLS) provide high sensitivity, fast response and highly specific in situ measurements of several atmospheric trace gases simultaneously. Under optimum conditions even a shot noise limited performance can be obtained. For field applications outside the laboratory practical limitations are important. At ambient mixing ratios below a few parts-per-billion spectrometers become more and more sensitive towards noise, interference, drift effects and background changes associated with low level signals. It is the purpose of this review to address some of the problems which are encountered at these low levels and to describe a signal processing strategy for trace gas monitoring and a concept for in situ system calibration applicable for tunable diode-laser spectroscopy. To meet the requirement of quality assurance for field measurements and monitoring applications, procedures to check the linearity according to International Standard Organization regulations are described and some measurements of calibration functions are presented and discussed.