High shear stress on the coronary arterial wall is related to computed tomography-derived high-risk plaque: a three-dimensional computed tomography and color-coded tissue-characterizing intravascular ultrasonography study

Quantitative evaluation using carotid Ultrasonography-Based High-Frame-Rate vector flow imaging in patients with low carotid stenosis

OBJECTIVE

To explore the role of quantitative evaluation using carotid ultrasonography (US)-based high-frame-rate vector flow (V Flow) imaging in patients with low carotid stenosis.

METHODS

This single-center cross-sectional study consecutively recruited volunteers without carotid plaque and patients with low carotid stenosis from August 2022 to May 2023. Patients were divided into symptomatic and asymptomatic groups according to their head CT or MRI results within eight weeks. All V Flow imaging examinations were performed using a Mindray Resona R9 US system. The wall shear stress (WSS) values, oscillatory shear index (OSI) values and turbulence (Tur) indexes in the normal common carotid artery (CCA), normal carotid bifurcation (CB), and on the upstream and downstream surface of carotid plaque were measured. Pearson Chi-square test and Fisher exact test were used for counting data according to their type. For measurement data, independent sample t test and non-parametric rank sum test were used.

RESULTS

The results proved that patients have higher WSS values and Tur indexes of CB than volunteers, and higher WSS values were detected on the surface of the plaques in symptomatic patients. What's more, the downstream side of the plaque was more vulnerable to plaque rupture than the upstream side due to more dynamic blood flow.

CONCLUSION

Therefore, carotid US-based high-frame-rate V Flow imaging provides reliable mechanical biomarkers for assessing the hemodynamic change in patients with low stenosis. Our study may provide a new imaging tool for monitoring the progression of atherosclerosis and aiding the management of early atherosclerotic patients.

The relationship between geometry and hemodynamics of the stenotic carotid artery based on computational fluid dynamics

OBJECTIVE

The purpose of this work was to investigate the relationship between the geometric factors and the hemodynamics of the stenotic carotid artery.

METHODS

We retrospectively reviewed data of patients with carotid stenosis (40%-95%). The Navier-Stokes equations were solved using ANSYS CFX 18.0. Correlation analysis was based on Spearman's test. Geometric variables (p < 0.1 in the univariate analysis) were entered into the logistical regression. A receiver-operating characteristics analysis was used to detect hemodynamically significant lesions.

RESULTS

81 patients (96 arteries) were evaluated. The logistic regression analysis revealed that the translesional pressure ratio was significantly correlated with the stenosis degree (OR = 1.147, p < 0.001) and the angle between internal carotid artery and external carotid artery (angle γ) (OR = 0.933, p = 0.01). The translesional wall shear stress ratio was significantly correlated with stenosis degree (OR = 1.094, p < 0.001), lesion length (OR = 0.873, p = 0.01), lumen area of internal carotid artery (OR = 0.867, p = 0.002), and lumen area of common carotid artery (OR = 1.058, p = 0.01). For predicting low translesional pressure ratio, the AUC was 0.71 (p < 0.001) for angle γ, and was 0.87 (p < 0.001) for stenosis degree. For predicting high translesional wall shear stress ratio, the AUC was 0.62 (p = 0.04) for lumen area of internal carotid artery, and was 0.77 (p < 0.001) for stenosis degree.

CONCLUSIONS

Apart from stenosis degree, other geometric characteristics of lesions may also have an influence on hemodynamics of the stenotic carotid artery.

Wall shear stress and its role in atherosclerosis

Atherosclerosis (AS) is the major form of cardiovascular disease and the leading cause of morbidity and mortality in countries around the world. Atherosclerosis combines the interactions of systemic risk factors, haemodynamic factors, and biological factors, in which biomechanical and biochemical cues strongly regulate the process of atherosclerosis. The development of atherosclerosis is directly related to hemodynamic disorders and is the most important parameter in the biomechanics of atherosclerosis. The complex blood flow in arteries forms rich WSS vectorial features, including the newly proposed WSS topological skeleton to identify and classify the WSS fixed points and manifolds in complex vascular geometries. The onset of plaque usually occurs in the low WSS area, and the plaque development alters the local WSS topography. low WSS promotes atherosclerosis, while high WSS prevents atherosclerosis. Upon further progression of plaques, high WSS is associated with the formation of vulnerable plaque phenotype. Different types of shear stress can lead to focal differences in plaque composition and to spatial variations in the susceptibility to plaque rupture, atherosclerosis progression and thrombus formation. WSS can potentially gain insight into the initial lesions of AS and the vulnerable phenotype that gradually develops over time. The characteristics of WSS are studied through computational fluid dynamics (CFD) modeling. With the continuous improvement of computer performance-cost ratio, WSS as one of the effective parameters for early diagnosis of atherosclerosis has become a reality and will be worth actively promoting in clinical practice. The research on the pathogenesis of atherosclerosis based on WSS is gradually an academic consensus. This article will comprehensively review the systemic risk factors, hemodynamics and biological factors involved in the formation of atherosclerosis, and combine the application of CFD in hemodynamics, focusing on the mechanism of WSS and the complex interactions between WSS and plaque biological factors. It is expected to lay a foundation for revealing the pathophysiological mechanisms related to abnormal WSS in the progression and transformation of human atherosclerotic plaques.

Relationship between tissue characteristics and mechanical properties of coronary plaques: a comparison between integrated backscatter intravascular ultrasound (IVUS) and speckle-tracking IVUS

High-risk coronary plaques have certain morphological characteristics. Thus, comprehensive assessment is needed for the risk stratification of plaques in patients with coronary artery disease. Integrated backscatter intravascular ultrasound (IB-IVUS) has been used successfully used to evaluate the tissue characteristics of coronary plaques; however, the mechanical properties of plaques have been rarely assessed. Therefore, we developed Speckle-tracking IVUS (ST-IVUS) to evaluate the mechanical properties of coronary plaque. This study aimed to evaluate the relation between the tissue characteristics of coronary plaques using IB-IVUS and their mechanical properties using ST-IVUS. We evaluated 95 non-targeted plaques in 95 patients undergoing elective percutaneous coronary intervention to the left anterior descending artery. We set regions of interest (ROIs) in the cross-sectional images of coronary plaques where we divided 120 degree plaques into four quadrants (every 30 degrees), with the center at the area of maximum atheroma thickness. We measured relative calcification area (%CA, relative fibrous area (%FI) and relative lipid pool area (%LP) in a total of 380 ROIs. In ST-IVUS analysis, we measured strain in the circumferential direction of the lumen area (LA strain: %), the external elastic membrane area strain (EEM strain: %), and strain in the radial direction (radial strain: %). On global cross-sectional area IB-IVUS analysis, the %CA was 1.2 ± 1.2%; the %FI was 49.0 ± 15.9%, and the %LP was 49.7 ± 16.5%. In ST-IVUS analysis, the LA strain was 0.67 ± 0.43%; the EEM strain was 0.49 ± 0.33%, and the radial strain was 2.02 ± 1.66%. On regional analysis, the %LP was not associated with the LA strain (r = - 0.002 p = 0.97), the EEM strain (r = - 0.05 p = 0.35), or with the radial strain (r = - 0.04 p = 0.45). These trends were seen between the %FI and the LA strain (r = 0.02 p = 0.74), the %FI and the EEM strain (r = 0.05 p = 0.35), and the %FI and the radial strain (r = 0.04 p = 0.50). A significant correlation was only observed between the %CA and the LA strain (r = - 0.15 p = 0.0038). Our findings indicate that the associations between mechanical properties and tissue characteristics lacked statistical significance, more often than not, and that it is necessary to evaluate the mechanical properties as well as plaque characteristics for risk stratification of coronary plaques.

Observation of plaque behavior and tissue characterization of coronary plaque using speckle tracking intravascular ultrasound (ST-IVUS) and iMap imaging system

Tissue characterization plays an important role in the development of acute coronary syndromes. iMap is an intravascular ultrasound (IVUS) tissue characterization system that provides useful information by reconstructing color-coded maps. Mechanical properties due to dynamic mechanical stress during a cardiac cycle may also trigger vulnerable plaque. Speckle tracking IVUS (ST-IVUS) has been introduced to observe plaque behavior in relation to mechanical properties. We report the case of an 84-year-old woman with stable coronary artery disease who underwent percutaneous coronary intervention, at which time IVUS demonstrated mainly three low echoic areas like lipid pools with thick fibrous caps. Pathological evaluation with iMap revealed that one low echoic area was occupied with necrotic tissue and that the other two areas occupied fibrotic. Although those tissue characterizations were different, they showed similar stretching behavior at systole by ST-IVUS which depicted plaque behavior from IVUS images using a color mapping. The mechanical properties of individual coronary plaques may differ depending on the tissue disposition. It is necessary to consider mechanical properties using ST-IVUS as well as to evaluate tissue characterization in plaque risk stratification.

Coronary CT Angiography to Guide Percutaneous Coronary Intervention

Coronary CT angiography (CCTA) has emerged as a powerful noninvasive tool for characterizing the presence, extent, and severity of coronary artery disease (CAD) in patients with stable angina. Recent technological advancements in CT scanner hardware and software have augmented the rich information that can be derived from a single CCTA study. Beyond merely identifying the presence of CAD and assessing stenosis severity, CCTA now allows for the identification and characterization of plaques, lesion length, and fluoroscopic angle optimization, as well as enables the assessment of the physiologic extent of stenosis through CT-derived fractional flow reserve, and may even allow for the prediction of the response to revascularization. These and other features make CCTA capable of not only guiding invasive coronary angiography referral, but also give it the unique ability to help plan coronary intervention. This review summarizes current and future applications of CCTA in procedural planning for percutaneous coronary intervention, provides rationale for wider integration of CCTA in the workflow of the interventional cardiologist, and details how CCTA may help improve patient care and clinical outcomes. Keywords: CT Angiography © RSNA, 2022.

Wall Shear Stress Alteration: a Local Risk Factor of Atherosclerosis

PURPOSE OF REVIEW

Wall shear stress describes the mechanical influence of blood flow on the arterial wall. In this review, we discuss the role of the wall shear stress in the development of atherosclerosis and its complications.

RECENT FINDINGS

Areas with chronically low, oscillating wall shear stress are most prone to plaque development and include outer bifurcation walls and inner walls of arches. In some diseases, patients have lower wall shear stress even in straight arterial segments; also, these findings were associated with atherosclerosis. High wall shear stress develops in the distal part (shoulder) of a stenosis and contributes to plaque destabilization. Wall shear stress changes are involved in the development of atherosclerosis. They are not fully understood yet and act in concert with tangential wall stress.

Investigation of Wall Shear Stress in Cardiovascular Research and in Clinical Practice-From Bench to Bedside

In the 1900s, researchers established animal models experimentally to induce atherosclerosis by feeding them with a cholesterol-rich diet. It is now accepted that high circulating cholesterol is one of the main causes of atherosclerosis; however, plaque localization cannot be explained solely by hyperlipidemia. A tremendous amount of studies has demonstrated that hemodynamic forces modify endothelial athero-susceptibility phenotypes. Endothelial cells possess mechanosensors on the apical surface to detect a blood stream-induced force on the vessel wall, known as "wall shear stress (WSS)", and induce cellular and molecular responses. Investigations to elucidate the mechanisms of this process are on-going: on the one hand, hemodynamics in complex vessel systems have been described in detail, owing to the recent progress in imaging and computational techniques. On the other hand, investigations using unique in vitro chamber systems with various flow applications have enhanced the understanding of WSS-induced changes in endothelial cell function and the involvement of the glycocalyx, the apical surface layer of endothelial cells, in this process. In the clinical setting, attempts have been made to measure WSS and/or glycocalyx degradation non-invasively, for the purpose of their diagnostic utilization. An increasing body of evidence shows that WSS, as well as serum glycocalyx components, can serve as a predicting factor for atherosclerosis development and, most importantly, for the rupture of plaques in patients with high risk of coronary heart disease.

The effect of rapid maxillary expansion on the upper airway's aerodynamic characteristics

Background

The effect of rapid maxillary expansion (RME) on the upper airway (UA) has been studied earlier but without a consistent conclusion. This study aims to evaluate the outcome of RME on the UA function in terms of aerodynamic characteristics by applying a computational fluid dynamics (CFD) simulation.

Methods

This retrospective cohort study consists of seventeen cases with two consecutive CBCT scans obtained before (T0) and after (T1) RME. Patients were divided into two groups with respect to patency of the nasopharyngeal airway as expressed in the adenoidal nasopharyngeal ratio (AN): group 1 was comprised of patients with an AN ratio < 0.6 and group 2 encompassing those with an AN ratio ≥ 0.6. CFD simulation at inspiration and expiration were performed based on the three-dimensional (3D) models of the UA segmented from the CBCT images. The aerodynamic characteristics in terms of pressure drop (ΔP), maximum midsagittal velocity (V_ms), and maximum wall shear stress (P_ws) were compared by paired t-test and Wilcoxon test according to the normality test at T0 and T1.

Results

The aerodynamic characteristics in UA revealed no statistically significant difference after RME. The maximum V_ms (m/s) decreased from 2.79 to 2.28 at expiration after RME (P = 0.057).

Conclusion

The aerodynamic characteristics were not significantly changed after RME. Further CFD studies with more cases are warranted.

Evaluation of Plaque Characteristics and Inflammation Using Magnetic Resonance Imaging

Atherosclerosis is an inflammatory disease of large and medium-sized arteries, characterized by the growth of atherosclerotic lesions (plaques). These plaques often develop at inner curvatures of arteries, branchpoints, and bifurcations, where the endothelial wall shear stress is low and oscillatory. In conjunction with other processes such as lipid deposition, biomechanical factors lead to local vascular inflammation and plaque growth. There is also evidence that low and oscillatory shear stress contribute to arterial remodeling, entailing a loss in arterial elasticity and, therefore, an increased pulse-wave velocity. Although altered shear stress profiles, elasticity and inflammation are closely intertwined and critical for plaque growth, preclinical and clinical investigations for atherosclerosis mostly focus on the investigation of one of these parameters only due to the experimental limitations. However, cardiovascular magnetic resonance imaging (MRI) has been demonstrated to be a potent tool which can be used to provide insights into a large range of biological parameters in one experimental session. It enables the evaluation of the dynamic process of atherosclerotic lesion formation without the need for harmful radiation. Flow-sensitive MRI provides the assessment of hemodynamic parameters such as wall shear stress and pulse wave velocity which may replace invasive and radiation-based techniques for imaging of the vascular function and the characterization of early plaque development. In combination with inflammation imaging, the analyses and correlations of these parameters could not only significantly advance basic preclinical investigations of atherosclerotic lesion formation and progression, but also the diagnostic clinical evaluation for early identification of high-risk plaques, which are prone to rupture. In this review, we summarize the key applications of magnetic resonance imaging for the evaluation of plaque characteristics through flow sensitive and morphological measurements. The simultaneous measurements of functional and structural parameters will further preclinical research on atherosclerosis and has the potential to fundamentally improve the detection of inflammation and vulnerable plaques in patients.

[Computed Tomography Coronary Angiography Possibilities in "High Risk" Plaque Identification in Patients with non-ST-Elevation Acute Coronary Syndrome: Comparison with Intravascular Ultrasound]

Aim      To evaluate structural characteristics of atherosclerotic plaques (ASP) by coronary computed tomography arteriography (CCTA) and intravascular ultrasound (IVUS).Material and methods  This study included 37 patients with acute coronary syndrome (ACS). 64-detector-row CCTA, coronarography, and grayscale IVUS were performed prior to coronary stenting. The ASP length and burden, remodeling index (RI), and known CT signs of unstable ASP (presence of dot calcification, positive remodeling of the artery in the ASP area, irregular plaque contour, presence of a peripheral high-density ring and a low-density patch in the ASP). The ASP type and signs of rupture or thrombosis were determined by IVUS.Results The IVUS study revealed 45 unstable ASP (UASP), including 25 UASP with rupture and 20 thin-cap fibroatheromas (TCFA), and 13 stable ASP (SASP). No significant differences were found between distribution of TCFA and ASP with rupture among symptom-associated plaques (SAP, n=28) and non-symptom-associated plaques (NSAP, n=30). They were found in 82.1 and 73.3 % of cases, respectively (p&gt;0.05), which indicated generalization of the ASP destabilization process in the coronary circulation. However, the incidence of mural thrombus was higher for SAP (53.5 and 16.6 % of ASP, respectively; p&lt;0.001). There was no difference between UASP and SASP in the incidence of qualitative ASP characteristics or in values of quantitative ASP characteristics, including known signs of instability, except for the irregular contour, which was observed in 92.9 % of UASP and 46.1 % of SASP (p=0.0007), and patches with X-ray density ≤46 HU, which were detected in 83.3 % of UASP and 46.1 % of SASP (р=0.01). The presence of these CT criteria 11- and 7-fold increased the likelihood of unstable ASP (odd ratio (OR), 11.1 at 95 % confidence interval (CI), from 2.24 to 55.33 and OR, 7.0 at 95 % CI, from 5.63 to 8.37 for the former and the latter criterion, respectively).Conclusion      According to IVUS data, two X-ray signs are most characteristic for UASP, the irregular contour and a patch with X-ray density ≤46 HU. The presence of these signs 11- and 7-fold, respectively, increases the likelihood of unstable ASP.

Relationship between high shear stress and OCT-verified thin-cap fibroatheroma in patients with coronary artery disease

High-risk coronary plaques have been considered predictive of adverse cardiac events. Both wall shear stress (WSS) in patients with hemodynamically significant lesions and optical coherence tomography (OCT) -verified thin-cap fibroatheroma (TCFA) are associated with plaque rupture, the most common underlying mechanism of acute coronary syndrome. The aim of the study was to test the hypothesis that invasive coronary angiography-based high WSS is associated with the presence of TCFA detected by OCT in obstructive lesions. From a prospective study of patients who underwent OCT examination for angiographically obstructive lesions (Yellow II), we selected patients who had two angiographic projections to create a 3-dimensional reconstruction model to allow assessment of WSS. The patients were divided into 2 groups according to the presence and absence of TCFA. Mean WSS was assessed in the whole lesion and in the proximal, middle and distal segments. Of 70 patients, TCFA was observed in 13 (19%) patients. WSS in the proximal segment (WSSproximal) (10.20 [5.01, 16.93Pa]) and the whole lesion (WSSlesion) (12.37 [6.36, 14.55Pa]) were significantly higher in lesions with TCFA compared to WSSproximal (5.84 [3.74, 8.29Pa], p = 0.02) and WSSlesion (6.95 [4.41, 11.60], p = 0.04) in lesions without TCFA. After multivariate analysis, WSSproximal was independently associated with the presence of TCFA (Odds ratio 1.105; 95%CI 1.007-1.213, p = 0.04). The optimal cutoff value of WSSproximal to predict TCFA was 6.79 Pa (AUC: 0.71; sensitivity: 0.77; specificity: 0.63 p = 0.02). Our results demonstrate that high WSS in the proximal segments of obstructive lesions is an independent predictor of OCT-verified TCFA.

High Wall Shear Stress Is Related to Atherosclerotic Plaque Rupture in the Aortic Arch of Patients with Cardiovascular Disease: A Study with Computational Fluid Dynamics Model and Non-Obstructive General Angioscopy

Aims: Wall shear stress (WSS) has been considered a major determinant of aortic atherosclerosis. Recently, non-obstructive general angioscopy (NOGA) was developed to visualize various atherosclerotic pathologies, including in vivo ruptured plaque (RP) in the aorta. However, the relationship between aortic RP and WSS distribution within the aortic wall is unclear. This study aimed to investigate the relationship between aortic NOGA-derived RP and the stereographic distribution of WSS by computational fluid dynamics (CFD) modeling using three-dimensional computed tomography (3D-CT) angiography.

Methods: We investigated 45 consecutive patients who underwent 3D-CT before coronary angiography and NOGA during coronary angiography. WSS in the aortic arch was measured by CFD analysis based on the finite element method using uniform inlet and outlet flow conditions. Aortic RP was detected by NOGA.

Results: Patients with a distinct RP showed a significantly higher maximum WSS value in the aortic arch than those without aortic RP (56.2±30.6 Pa vs 36.2±19.8 Pa, p =0.017), no significant difference was noted in the mean WSS between those with and without aortic RP. In a multivariate logistic regression analysis, the presence of a maximum WSS value more than a specific value was a significant predictor of aortic RP (odds ratio 7.21, 95% confidence interval 1.78-37.1, p =0.005).

Conclusions: Aortic RP detected by NOGA was strongly associated with a higher maximum WSS in the aortic arch derived by CFD using 3D-CT. The maximum WSS value may have an important role in the underlying mechanism of not only aortic atherosclerosis, but also aortic RP.

Biomechanical Forces and Atherosclerosis: From Mechanism to Diagnosis and Treatment

The article provides an overview of current views on the role of biomechanical forces in the pathogenesis of atherosclerosis. The importance of biomechanical forces in maintaining vascular homeostasis is considered. We provide descriptions of mechanosensing and mechanotransduction. The roles of wall shear stress and circumferential wall stress in the initiation, progression and destabilization of atherosclerotic plaque are described. The data on the possibilities of assessing biomechanical factors in clinical practice and the clinical significance of this approach are presented. The article concludes with a discussion on current therapeutic approaches based on the modulation of biomechanical forces.