Effect of stoichiometry and pH on the structure and properties of Chitosan/Chondroitin sulfate complexes

Self-Assembled Hydrogel Based on (Bio)polyelectrolyte Complex of Chitosan-Gelatin: Effect of Composition on Physicochemical Properties

Taking into account the trends in the field of green chemistry and the desire to use natural materials in biomedical applications, (bio)polyelectrolyte complexes ((bio)PECs) based on a mixture of chitosan and gelatin seem to be relevant systems. Using the approach of self-assembly from the dispersion of the coacervate phase of a (bio)PEC at different ratios of ionized functional groups of chitosan and gelatin (z), hydrogels with increased resistance to mechanical deformations and resorption in liquid media were obtained in this work in comparison to a hydrogel from gelatin. It was found that at z ≥ 1 a four-fold increase in the elastic modulus of the hydrogel occurred in comparison to a hydrogel based on gelatin. It was shown that hydrogels at z ≈ 1 had an increased sorption capacity and water sorption rate, as well as increased resistance to the in vitro model environment of phosphate-buffered saline (PBS) solution containing lysozyme at 37 °C. It was also shown that in PBS and simulated gastric fluid (SGF) solutions, the effect of the polyelectrolyte swelling of the hydrogels was significantly suppressed; however, at z ≥ 1, the (bio)PEC hydrogels had increased stability compared to the samples at z < 1 and based on gelatin.

Design, optimization and characterization of atorvastatin loaded chitosan-based polyelectrolyte complex nanoparticles based transdermal patch

AIM

Atorvastatin (ATO) loaded chitosan-based polyelectrolyte complex nanoparticles (PECN) incorporated transdermal patch was developed to enhance its skin permeability and bioavailability.

METHODOLOGY

The ATO loaded PECN were prepared by ionic gelation method and optimized by Box-Behnken design. The optimized batches were evaluated for physicochemical characteristics, in vitro, ex vivo, cell line and stability studies. The optimized ATO-PECN were incorporated into transdermal patches by solvent evaporation method and evaluated for their physicochemical properties, ex vivo skin permeation, in vivo pharmacokinetics and stability study.

RESULTS

The optimized batch of ATO-PECN had average size of 219.2 ± 5.98 nm with 82.68 ± 2.63 % entrapment and 25.41 ± 3.29 mV zeta potential. ATO-PECN showed sustained drug release and higher skin permeation. The cell line study showed that ATO-PECN increased the cell permeability of ATO as compared to ATO suspension. ATO-PECN loaded transdermal patch showed higher skin permeation. The in vivo pharmacokinetic study revealed that the ATO-PECN transdermal patch showed significant (p < 0.05) increase in pharmacokinetic parameters as compared to marketed oral tablet, confirming enhancement in bioavailability of ATO.

CONCLUSIONS

The results of the present work concluded that the ATO-PECN loaded transdermal patch is a promising novel drug delivery system for poorly bioavailable drugs.

Fabrication and evaluation of cross-linked nanogels of Dexibuprofen

The objective of this study was to design and develop an Agarose-based polymeric nanogel network system for solubility enhancement of a lipophilic drug, Dexibuprofen. Polymeric nanogels were synthesized through free radical polymerization where Agarose was cross-linked with 2-Acrylamido-2-methylpropane sulfonic acid (AMPS) in the presence of ammonium persulfate (APS) as an initiator and N, N’-Methylenebisacrylamide (MBA) as crosslinking agent. The resulting polymeric nanogels underwent a comprehensive characterization process including Fourier transform infrared (FTIR), particle size analysis, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), powder X-ray diffraction (PXRD), and swelling studies to confirm the preparation of a stable polymeric nanogel system. FTIR spectral findings revealed that Agarose was chemically cross-linked with AMPS and confirmed the successful insertion of AMPS chains on the Agarose backbone. Particle size analysis revealed a diameter of 168 nm with a zeta potential of −9.91 mV, providing assurance of a stable polymeric nanogel system. SEM images depicted a highly porous surface. DSC and TGA results showed a more thermally stable network system than individual ingredients. Swelling studies revealed an increased swelling ratio of polymeric nanogels at phosphate buffer of pH 6.8 than acidic buffer of pH 1.2. Dexibuprofen was efficiently loaded into a polymeric nanogel system with a high entrapment efficiency of up to 80%. The solubility of the drug was enhanced when introduced to a polymeric nanogel formulation when compared to pure drug. The system reproducibility was evaluated through in vitro drug release and kinetic modeling of drug release. Toxicity studies confirmed the formulation’s effectiveness, showcasing the developed polymeric nanogels as a promising option for delivering lipophilic drugs, with outstanding physicochemical properties, improved solubility, and minimal oral toxicity.

Effects of polycationic drug carriers on the electromechanical and swelling properties of cartilage

Cationic nanocarriers offer a promising solution to challenges in delivering drugs to negatively charged connective tissues, such as to articular cartilage for the treatment of osteoarthritis (OA). However, little is known about the effects that cationic macromolecules may have on the mechanical properties of cartilage at high interstitial concentrations. We utilized arginine-rich cationic peptide carriers (CPCs) with varying net charge (from +8 to +20) to investigate the biophysical mechanisms of nanocarrier-induced alterations to cartilage biomechanical properties. We observed that CPCs increased the compressive modulus of healthy bovine cartilage explants by up to 70% and decreased the stiffness of glycosaminoglycan-depleted tissues (modeling OA) by 69%; in both cases, the magnitude of the change in stiffness correlated with the uptake of CPC charge variants. Next, we directly measured CPC-induced osmotic deswelling in cartilage tissue due to shielding of charge repulsions between anionic extracellular matrix constituents, with magnitudes of reductions between 36 and 64 kPa. We then demonstrated that electrostatic interactions were required for CPC-induced stiffening to occur, evidenced by no observed increase in tissue stiffness when measured in hypertonic bathing salinity. We applied a non-ideal Donnan osmotic model (under triphasic theory) to separate bulk modulus measurements into Donnan and non-Donnan components, which further demonstrated the conflicting charge-shielding and matrix-stiffening effects of CPCs. These results show that cationic drug carriers can alter tissue mechanical properties via multiple mechanisms, including the expected charge shielding as well as a novel stiffening phenomenon mediated by physical linkages. We introduce a model for how the magnitudes of these mechanical changes depend on tunable physical properties of the drug carrier, including net charge, size, and spatial charge distribution. We envision that the results and theory presented herein will inform the design of future cationic drug-delivery systems intended to treat diseases in a wide range of connective tissues.

Chitosan hydrogels in 3D printing for biomedical applications

Tissue engineering and regenerative medicine have entered a new stage of development by the recent progress in biology, material sciences, and particularly an emerging additive manufacturing technique, three-dimensional (3D) printing. 3D printing is an advanced biofabrication technique which can generate patient-specific scaffolds with highly complex geometries while hosting cells and bioactive agents to accelerate tissue regeneration. Chitosan hydrogels themselves have been widely used for various biomedical applications due to its abundant availability, structural features and favorable biological properties; however, the 3D printing of chitosan-based hydrogels is still under early exploration. Therefore, 3D printing technologies represent a new avenue to explore the potential application of chitosan as an ink for 3D printing, or as a coating on other 3D printed scaffolds. The combination of chitosan-based hydrogels and 3D printing holds much promise in the development of next generation biomedical implants.

Chitosan Based Self-Assembled Nanoparticles in Drug Delivery

Chitosan is a cationic polysaccharide that is usually obtained by alkaline deacetylation of chitin poly(N-acetylglucosamine). It is biocompatible, biodegradable, mucoadhesive, and non-toxic. These excellent biological properties make chitosan a good candidate for a platform in developing drug delivery systems having improved biodistribution, increased specificity and sensitivity, and reduced pharmacological toxicity. In particular, chitosan nanoparticles are found to be appropriate for non-invasive routes of drug administration: oral, nasal, pulmonary and ocular routes. These applications are facilitated by the absorption-enhancing effect of chitosan. Many procedures for obtaining chitosan nanoparticles have been proposed. Particularly, the introduction of hydrophobic moieties into chitosan molecules by grafting to generate a hydrophobic-hydrophilic balance promoting self-assembly is a current and appealing approach. The grafting agent can be a hydrophobic moiety forming micelles that can entrap lipophilic drugs or it can be the drug itself. Another suitable way to generate self-assembled chitosan nanoparticles is through the formation of polyelectrolyte complexes with polyanions. This paper reviews the main approaches for preparing chitosan nanoparticles by self-assembly through both procedures, and illustrates the state of the art of their application in drug delivery.

Chitosan/chondroitin sulfate aerogels with high polymeric electroneutralization degree: formation and mechanical properties

The formation of ultralight, highly porous solid materials (porosity higher than 99%) containing equivalent molar amounts of chitosan (CS) and chondroitin sulfate (ChS) is presented. First, we show protocols to produce colloidal suspensions of assembled polymer nanocomplexes by simultaneously mixing equimolar amounts of the oppositely charged polysaccharides, preventing macroprecipitation. The colloidal suspensions were then freeze-dried to form the active aerogels. Apparent density in the order of 100–101 mg/cm3 was achieved. The materials show low stiffness (Young’s modulus of about 2 kPa), which make them easy to handle for clinical applications, and easy to compress, pack, store and transport. These characteristics promote them as cheap, safe and biodegradable materials able to be used for several therapeutic purposes, such as wound healing.

Design of chondroitin sulfate-based polyelectrolyte nanoplexes: Formation of nanocarriers with chitosan and a case study of salmon calcitonin

The aim of this work was to examine the formation and properties of chondroitin sulfate (CHON)-based nanoparticles (NPs), namely CHON/chitosan (CHIT), CHON/CHIT/calcitonin (sCT) and CHON/sCT. Both, positively and negatively charged CHON/CHIT NPs have been successfully obtained with properties that were dependent on the polymer mixing ratio, polymer concentration and molecular weight of CHIT. sCT was successfully loaded into CHON/CHIT NPs with efficiency close to 100% and notably high loading (up to 33%). A new type of NPs composed of CHON and sCT (a binary system) has been successfully developed. CHON/sCT NPs offer the advantage of a very high drug loading up to 73%. The particle size of CHON-based NPs increased in PBS, acetate buffer and in HCl solution compared to that in water, but most of them remained in the nano-range even after 24h. The media and composition of the nanocarriers were found to affect the release of sCT.

Zinc-Stabilized Chitosan-Chondroitin Sulfate Nanocomplexes for HIV-1 Infection Inhibition Application

Polyelectrolyte complexes (PECs) constituted of chitosan and chondroitin sulfate (ChonS) were formed by the one-shot addition of default amounts of polyanion to an excess of polycation. Key variables of the formulation process (e.g., degree of depolymerization, charge mixing ratio, the concentration, and pH of polyelectrolyte solutions) were optimized based on the PECs sizes and polydispersities. The PECs maintained their colloidal stability at physiological salt concentration and pH thanks to the complexation of polyelectrolytes with zinc(II) ion during the nanoPECs formation process. The PECs were capable of encapsulating an antiretroviral drug tenofovir (TF) with a minimal alteration on the colloidal stability of the dispersion. Moreover, the particle interfaces could efficiently be functionalized with anti-OVA or anti-α4β7 antibodies with conservation of the antibody biorecognition properties over 1 week of storage in PBS at 4 °C. In vitro cytotoxicity studies showed that zinc(II) stabilized chitosan-ChonS nanoPECs were noncytotoxic to human peripheral blood mononuclear cells (PBMCs), and in vitro antiviral activity test demonstrated that nanoparticles formulations led to a dose-dependent reduction of HIV-1 infection. Using nanoparticles as a drug carrier system decreases the IC50 (50% inhibitory concentration) from an aqueous TF of 4.35 μmol·L(-1) to 1.95 μmol·L(-1). Significantly, zinc ions in this system also exhibited a synergistic effect in the antiviral potency. These data suggest that chitosan-ChonS nanoPECs can be promising drug delivery system to improve the antiviral potency of drugs to the viral reservoirs for the treatment of HIV infection.

Biomimetic microbeads containing a chondroitin sulfate/chitosan polyelectrolyte complex for cell-based cartilage therapy

Articular cartilage has a limited healing capacity that complicates the treatment of joint injuries and osteoarthritis. Newer repair strategies have focused on the use of cells and biomaterials to promote cartilage regeneration. In the present study, we developed and characterized bioinspired materials designed to mimic the composition of the cartilage extracellular matrix. Chondroitin sulfate (CS) and chitosan (CH) were used to form physically cross-linked macromolecular polyelectrolyte complexes (PEC) without the use of additional crosslinkers. A single-step water-in-oil emulsification process was used to either directly embed mesenchymal stem cells (MSC) in PEC particles created with a various concentrations of CS and CH, or to co-embed MSC with PEC in agarose-based microbeads. Direct embedding of MSC in PEC resulted in high cell viability but irregular and large particles. Co-embedding of PEC particles with MSC in agarose (Ag) resulted in uniform microbeads 80-90 μm in diameter that maintained high cell viability over three weeks in culture. Increased serum content resulted in more uniform PEC distribution within the microbead matrix, and both high and low CS:CH ratios resulted in more homogeneous microbeads than 1:1 formulations. Under chondrogenic conditions, expression of sulfated GAG and collagen type II was increased in 10:1 CS:CH PEC-Ag microbeads compared to pure Ag beads, indicating a chondrogenic influence of the PEC component. Such PEC-Ag microbeads may have utility in the directed differentiation and delivery of progenitor cell populations for cartilage repair.

Chitosan hydrogels for chondroitin sulphate controlled release: an analytical characterization

This paper provides an analytical characterization of chitosan scaffolds obtained by freeze-gelation toward the uptake and the controlled release of chondroitin sulphate (CS), as cartilage repair agent, under different pH conditions. Scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and liquid chromatography-UV spectrophotometry (LC-UV) techniques were exploited to obtain qualitative and quantitative descriptions of polymer and drug behaviour in the biomaterial. As for morphology, SEM analysis allowed the evaluation of scaffold porosity in terms of pore size and distribution both at the surface (Feret diameter 58 ± 19 μm) and on the cross section (Feret diameter 106 ± 51 μm). LC and ATR-FTIR evidenced a pH-dependent CS loading and release behaviour, strongly highlighting the role of electrostatic forces on chitosan/chondroitin sulphate interactions.