Utilization of eggshell waste as raw material for synthesis of hydroxyapatite

Eggshell derived scaffold of hydroxyapatite-ammonium bicarbonate nano-composite: Bioactivity and cytotoxicity studies

This work investigated the facile synthesis of porous scaffold eggshell derived hydroxylapatite (ESHAp) as a composite with ammonium bicarbonate (AMB) for potential biomaterial in tissue engineering application. The phase purity, composition, size, functional groups and morphology of the apatite were elucidated using high resolution transmission electron microscopy (HTEM), X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR) and scanning electron microscopy (SEM). The results showed that hydroxylapatite (HAp) nanoparticles have round morphologies with average diameters between 20 nm and 80 nm, FT-IR analysis confirmed significant hydroxylapatite functional groups like carbonate, phosphate, and hydroxyl groups, while XRD analysis revealed a well crystalline monophasic HAp powder. The scaffold samples containing 10, 20, 25 and 30 % of AMB withstood a compressive stress up to 5, 20, 30 and 42 N/mm2 respectively which indicates that the compressive stress increased with the AMB content introduced as the pore forming agent. MTT assay performed using MG63 osteosarcoma cell lines showed that on comparing the sample of ESTHAp which contained 0 % AMB with other samples in the range of 0.01-1 mM, viability of above 85 % MG63 cells was achieved except for ESTHAp with 40 % AMB, which showed some level of toxicity. The cell adhesion studies of sintered ESTHAp porous scaffold with different weight percent of the pore forming agents using inverted microscopic images of MG 63 cells incubated with ESTHAp samples and treated with heat at 1000 °C appeared to be unstable in the media used with particle leaching observed, and no cells observed near to the samples.

Enhancement of mechanical and barrier properties of chitosan-based bionanocomposites films reinforced with eggshell-derived hydroxyapatite nanoparticles

In this study, Hydroxyapatite nanoparticles (HANPs), derived from eggshell waste, were employed to reinforce chitosan biopolymer-based films through the solvent-casting method. The impact of varying HANPs content (1%, 3%, 5%, and 10 wt %) in bionanocomposites was investigated. The influence of HANPs addition on the final film properties was comprehensively analyzed using Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), mechanical (tensile) testing, and Water Vapor Permeability (WVP). The morphological aspects of bionanocomposites and the dispersion of nanoparticles within the matrix were studied using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD). The structural changes in the films were probed using Fourier-Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS) techniques. Results indicated that the addition of 1% and 3% of HANPs exhibited a higher glass transition temperature and improved thermal stability in bionanocomposites. Films with 3% HANPs content exhibited a notable increase in tensile strength, showing a 61.54% increase, while films with 1% HANPs content displayed a 52% reduction in WVP compared to pristine chitosan films. These findings underscore the significant potential of chitosan-hydroxyapatite bionanocomposite films for applications in food packaging applications.

Synthesis of nano-hydroxyapatite using emulsion, pyrolysis, combustion, and sonochemical methods and biogenic sources: a review

Hydroxyapatite (HAp) is comparable to materials in bone because its chemical components are similar to those contained in animal bone, and thus, its bioactive and biocompatible properties are similar. There are applications for HAp and relevant calcium phosphate in the medical and industrial sectors, and due to the rising demand for HAp nanoparticles, considerable work has been performed to develop a variety of synthetic pathways that incorporate scientifically and practically novel aspects. Numerous studies have been conducted to examine how changes in reaction parameters will successfully influence crucial HAp features. HAp can also be synthesized from biogenic sources such as HAp-rich fish scales or animal bones as an alternative to chemical precursors. Various preparation techniques produce crystals with varying sizes, but it has been found that nano-sized HAp exhibits a greater number of bioactive properties as compared to micron-sized HAp. Rather than considering conventional methods, this review focuses on alternative approaches such as emulsion, pyrolysis, combustion, and sonochemical methods along with waste bio-sources (biogenic sources) to obtain HAp. We summarize the currently accessible information pertaining to each synthesis process, while also focusing on their benefits and drawbacks.

The Application of Hydroxyapatite NPs for Adsorption Antibiotic from Aqueous Solutions: Kinetic, Thermodynamic, and Isotherm Studies

Antibiotic pollution has become a serious concern due to the extensive use of antibiotics, their resistance to removal, and their detrimental effects on aquatic habitats and humans. Hence, developing an efficient antibiotic removal process for aqueous solutions has become vital. Amoxicillin (Amox) is one of the antibiotics that has been efficiently removed from an aqueous solution using hydroxyapatite nanoparticles (HAP NPs). The current study synthesizes and utilizes hydroxyapatite nanoparticles as a cost-effective adsorbent. Adsorbent dose, pH solution, initial Amox concentration, equilibrium time, and temperature are among the factors that have an evident impact on Amox antibiotic adsorption. The (200) mg dose, pH (5), temperature (25) °C, and time (120) min are shown to be the best-optimized values. The nonlinear Langmuir’s isotherm and pseudo-second-order kinetic models with equilibrium capacities of 4.01 mg/g are highly compatible with the experimental adsorption data. The experimental parameters of the thermodynamic analysis show that the Amox antibiotic adsorption onto HAP NPs powder is spontaneous and exothermic.

Using in vitro bioassays to guide the development of safer bio-based polymers for use in food packaging

Petroleum-based polymers traditionally used for plastic packaging production have been shown to leach dangerous chemicals such as bisphenol-A (BPA). Bio-based polymers are potentially safer alternatives, and many can be sustainably sourced from waste streams in the food industry. This study assesses bio-based polymers undergoing food packaging development for migration of endocrine disrupting leachates at the level of estrogen, androgen and progestagen nuclear receptor transcriptional activity. Reporter gene assays were coupled with migration testing, performed using standardised test conditions for storage and temperature. Test samples include nine bio-based polymers and four inorganic waste additives mixed with a traditional petroleum-based polymer, polypropylene. Thermoplastic starch material, polybutylene succinate, polycaprolactone, polybutylene adipate terephthalate (PBAT), two polylactic acid (PLA)/PBAT blends, polyhydroxybutyrate (PHB) and eggshell/polypropylene (10:90) presented no significant reduction in metabolic activity or hormonal activity under any test condition. Polypropylene (PP) presented no hormonal activity. Metabolic activity was reduced in the estrogen responsive cell line after 10 days migration testing of eggshell/polypropylene (0.1:99.9) in MeOH at 40°C, and PP in MeOH and dH20. Estrogenic agonist activity was observed after 10 days in poultry litter ash/polypropylene (10:90) in MeOH at 20°C and 40°C, poultry feather based polymer in MeOH and dH2O at 40°C, and eggshell/polypropylene (40:60) and PLA in dH2O at 40°C. Activity was within a range of 0.26-0.50 ng 17β-estradiol equivalents per ml, equating to an estrogenic potency of 3-∼2800 times less than the estrogenic leachate BPA. Poultry litter ash/polypropylene (10:90) in MeOH for 10 days presented estrogenic activity at 20°C and 40°C within the above range and anti-androgenic activity at 40°C. Progestagenic activity was not observed for any of the compounds under any test condition. Interestingly, lower concentrations of eggshell or PP may eliminate eggshell estrogenicity and PP toxicity. Alternatively eggshell may bind and eliminate the toxic elements of PP. Similarly, PLA estrogenic activity was removed in both PLA/PBAT blends. This study demonstrates the benefits of bioassay guidance in the development of safer and sustainable packaging alternatives to petroleum-based plastics. Manipulating the types of additives and their formulations alongside toxicological testing may further improve safety aspects.

Low-Cost and Eco-Friendly Hydroxyapatite Nanoparticles Derived from Eggshell Waste for Cephalexin Removal

This work describes the hydroxyapatite nanoparticle (HAP) preparation from eggshell waste and their application as an adsorbent for Cephalexin (Ceph) antibiotic removal from aqueous solutions. Chemical precipitation with phosphoric acid was used to evaluate the feasibility of calcium oxide for HAP preparation. The structural properties of HAP were characterized by X-ray diffraction, which revealed the formation of the hydroxyapatite crystalline phase formation. In addition, transmitting electron spectroscopy showed an irregular shape with a variation in size. The impact of various experimental conditions on the removal efficiency such as the solution’s pH, contact time, HAP mass, solution temperature, and Ceph concentration were studied. Experimental data showed that HAP could remove most Ceph species from aqueous solutions within 1 h at pH = 7 with 70.70% adsorption efficiency utilizing 50 mg of the HAP. The removal process of Ceph species by HAP was kinetically investigated using various kinetic models, and the results showed the suitability of the pseudo-second-order kinetic model for the adsorption process description. Moreover, the removal process was thermodynamically investigated; the results showed that the removal was spontaneous endothermic and related to the randomness increase. The data confirmed that HAP had high efficiency in removing Ceph antibiotics from an aqueous solution.

Extraction of Value-Added Minerals from Various Agricultural, Industrial and Domestic Wastes

Environmental pollution is one of the major concerns throughout the world. The rise of industrialization has increased the generation of waste materials, causing environmental degradation and threat to the health of living beings. To overcome this problem and effectively handle waste materials, proper management skills are required. Waste as a whole is not only waste, but it also holds various valuable materials that can be used again. Such useful materials or elements need to be segregated and recovered using sustainable recovery methods. Agricultural waste, industrial waste, and household waste have the potential to generate different value-added products. More specifically, the industrial waste like fly ash, gypsum waste, and red mud can be used for the recovery of alumina, silica, and zeolites. While agricultural waste like rice husks, sugarcane bagasse, and coconut shells can be used for recovery of silica, calcium, and carbon materials. In addition, domestic waste like incense stick ash and eggshell waste that is rich in calcium can be used for the recovery of calcium-related products. In agricultural, industrial, and domestic sectors, several raw materials are used; therefore, it is of high economic interest to recover valuable minerals and to process them and convert them into merchandisable products. This will not only decrease environmental pollution, it will also provide an environmentally friendly and cost-effective approach for materials synthesis. These value-added materials can be used for medicine, cosmetics, electronics, catalysis, and environmental cleanup.

Coupled effect of particle size of the source materials and calcination temperature on the direct synthesis of hydroxyapatite

We report the effect of controlled particle size (obtained by using 80, 100, 120, 140 and 200 mesh) of the source materials on the synthesis of a well-known biomaterial, hydroxyapatite (Hap). In addition to this, we have also mapped the consequence of applied temperature (700°C, 800°C and 900°C) on the crystallographic properties and phase composition of the obtained Hap. Nevertheless, although with Hap, in each case, β-tricalcium phosphate (β-TCP) was registered as the secondary phase the ANOVA test revealed that the results of the crystallographic parameters are significantly different for the applied sintering temperature 700°C and 800°C (p < 0.05), while the data obtained for calcination temperature 800°C are not significantly different from that acquired at 900°C (p > 0.05). Fourier transform infrared spectrophotometer data ensured that, irrespective of mesh size and calcination temperature, the synthesized Hap samples were of carbonated apatite with B-type substitution. Interestingly, for all cases, the % of carbonate content was below the maximum limit (8%) of theCO 3 2 - ion present in bone tissue hydroxyapatite.

Emerging marine derived nanohydroxyapatite and their composites for implant and biomedical applications

Implant materials must mimic natural human bones with biocompatibility, osteoconductivity and mechanical stability to successfully replace damaged or disease-affected bones. Synthetic hydroxyapatite was incorporated with bioglass to mimic natural bones for replacing conventional implant materials which has led to certain toxicity issues. Hence, hydroxyapatite (HAp) are recently gaining applicational importance as they are resembling the structure and function of natural bones. Further, nanosized HAp is under extensive research to utilize them as a potential replacement for traditional implants with several exclusive properties. However, chemical synthesis of nano-HAp exhibited toxicity towards normal and healthy cells. Recently, biogenic Hap synthesis from marine and animal sources are introduced as a next generation implant materials, due to their mineral ion and significant porous architecture mediated biocompatibility and bone bonding ability, compared to synthetic HAp. Thus, the purpose of the paper is to give a bird's eye view into the conventional approaches for fabricating nano-HAp, its limitations and the significance of using marine organisms and marine food wastes as a precursor for biogenic nano-Hap production. Moreover, in vivo and in vitro analyses of marine source derived nano-HAp and their potential biomedical applications were also discussed.

Experimental data on the characterization of hydroxyapatite synthesized from biowastes

The purpose of the dataset is to present the morphological features, elemental composition and functional groups of hydroxyapatite (HAp) synthesized from non-separated biowastes (animal bones) by a modified facile heat treatment method up to a maximum temperature of 1100 °C. The synthesized powders were characterized using scanning electron microscopy (SEM) equipped with electron dispersive X-ray analysis (EDX) and Fourier transform infrared spectroscopy (FTIR). These evaluations were to reveal the surface features, elemental composition and identify the functional groups of the synthesized powders. After heat treatment of the raw biowastes to 900 °C, 1000 °C, and 1100 °C (regime of heat treatment), the morphological features of the samples exhibited a more densely packed microstructure at the highest sintering temperature (1100 °C). The elemental composition as evaluated by EDX on a weight and atomic basis for all samples provided information on the calcium to phosphate transforms into apatite with a Ca/P ratio of 3.60, 2.04, 2.50 and 2.32 wt % and 2.79, 1.58, 1.94 and 1.78 at. % respectively for raw biowastes (RB) to sintered samples (HA-900, HA-1000 and, HA-1100 °C). The FTIR data showed phosphate and hydroxyl peaks in the thermally treated samples and all the samples produced characteristic stretching modes of O–H bands at about 3417 cm⁻¹ which are noticed in all FTIR spectra of HAp.

Development of hydroxyapatite from eggshell waste and a chitosan-based composite: In vitro behavior of human osteoblast-like cell (Saos-2) cultures

Hydroxyapatite was successfully synthesized using eggshell waste as a raw material. Eggshell waste and orthophosphoric acid were co-precipitated for 2 h at an ambient temperature. The pH of the solution was adjusted to 10 using ammonium hydroxide. Then, 10-30 wt% of hydroxyapatite was loaded into the chitosan film. Scanning electron microscopy and energy dispersive analyses confirmed the morphological properties and dispersion. A thermogravimetric analysis showed a significant enhancement in the thermal stability of the composite. The existence of hydroxyapatite resulted in a higher thermal stability. Furthermore, atomic force microscopy was used to investigate the roughness of the surface. With the addition of hydroxyapatite, the roughness significantly increased. The swelling behavior of the composite was observed in phosphate buffer saline solution. The hydroxyapatite offered the inferiority on the swelling behavior. A preliminary investigation on the in vitro behavior of Saos-2 was also performed. The composite presented good cytotoxicity, and thus, excellent properties as a tissue engineering material.

Waste Composite Sensor Designed by Cellulose and Activated Carbon as Ethylene Absorber

Activated carbon was successfully derived from scrap tile waste from thermochemical conversion. Chemical and physical modifications were therefore employed to modify the specific surface area and porosity of activated carbon. Cellulose was successfully extracted from palm front. Designation of waste composite was prepared by cellulose and activated carbon. Less than 30 wt% of activated carbon was integrated into cellulose sheet matrix. It was important to note that there is no change in mechanical and morphological properties. Small amount of activated carbon was well dispersed. In order to investigate the feasibility of composite as active packaging, oxygen permeation rate and ethylene gas adsorption ability were preliminary investigated.