Successful posterior interlaminar fusion at the thoracic spine by sole use of beta-tricalcium phosphate

Use of Biomaterials in 3D Printing as a Solution to Microbial Infections in Arthroplasty and Osseous Reconstruction

The incidence of microbial infections in orthopedic prosthetic surgeries is a perennial problem that increases morbidity and mortality, representing one of the major complications of such medical interventions. The emergence of novel technologies, especially 3D printing, represents a promising avenue of development for reducing the risk of such eventualities. There are already a host of biomaterials, suitable for 3D printing, that are being tested for antimicrobial properties when they are coated with bioactive compounds, such as antibiotics, or combined with hydrogels with antimicrobial and antioxidant properties, such as chitosan and metal nanoparticles, among others. The materials discussed in the context of this paper comprise beta-tricalcium phosphate (β-TCP), biphasic calcium phosphate (BCP), hydroxyapatite, lithium disilicate glass, polyetheretherketone (PEEK), poly(propylene fumarate) (PPF), poly(trimethylene carbonate) (PTMC), and zirconia. While the recent research results are promising, further development is required to address the increasing antibiotic resistance exhibited by several common pathogens, the potential for fungal infections, and the potential toxicity of some metal nanoparticles. Other solutions, like the incorporation of phytochemicals, should also be explored. Incorporating artificial intelligence (AI) in the development of certain orthopedic implants and the potential use of AI against bacterial infections might represent viable solutions to these problems. Finally, there are some legal considerations associated with the use of biomaterials and the widespread use of 3D printing, which must be taken into account.

Osteogenesis of Adipose-Derived Stem Cells

Current treatment options for skeletal repair, including immobilization, rigid fixation, alloplastic materials and bone grafts, have significant limitations. Bone tissue engineering offers a promising method for the repair of bone deficieny caused by fractures, bone loss and tumors. The use of adipose derived stem cells (ASCs) has received attention because of the self-renewal ability, high proliferative capacity and potential of osteogenic differentiation in vitro and in vivo studies of bone regeneration. Although cell therapies using ASCs are widely promising in various clinical fields, no large human clinical trials exist for bone tissue engineering. The aim of this review is to introduce how they are harvested, examine the characterization of ASCs, to review the mechanisms of osteogenic differentiation, to analyze the effect of mechanical and chemical stimuli on ASC osteodifferentiation, to summarize the current knowledge about usage of ASC in vivo studies and clinical trials, and finally to conclude with a general summary of the field and comments on its future direction.

Effects of bioactive glass S53P4 or beta-tricalcium phosphate and bone morphogenetic protein-2 and bone morphogenetic protein-7 on osteogenic differentiation of human adipose stem cells

The effects of bioactive glass S53P4 or beta-tricalcium phosphate; and bone morphogenetic proteins bone morphogenetic protein-2, bone morphogenetic protein-7, or bone morphogenetic protein-2 + 7 on osteogenic differentiation of human adipose stem cells were compared in control medium, osteogenic medium, and bone morphogenetic protein-supplemented osteogenic medium to assess suitability for bone tissue engineering. Cell amount was evaluated with qDNA measurements; osteogenic differentiation using marker gene expression, alkaline phosphate activity, and angiogenic potential was measured by vascular endothelial growth factor expression. As compared to beta-tricalcium phosphate, cell amount was significantly greater for bioactive glass in control medium after 7 days and in osteogenic medium after 14 days, and alkaline phosphate activity was always significantly greater for bioactive glass in control medium. However, alkaline phosphate activity increased for beta-tricalcium phosphate and decreased for bioactive glass granules in osteogenic medium. For both biomaterials, bone morphogenetic protein supplementation decreased cell amount and osteogenic differentiation of human adipose stem cells, and vascular endothelial growth factor expressions correlated with cell amounts. Effects of culture medium on human adipose stem cells are biomaterial dependent; bioactive glass in control medium enhanced osteogenic differentiation most effectively.

Divergent resorbability and effects on osteoclast formation of commonly used bone substitutes in a human in vitro-assay

Bioactive bone substitute materials are a valuable alternative to autologous bone transplantations in the repair of skeletal defects. However, clinical studies have reported varying success rates for many commonly used biomaterials. While osteoblasts have traditionally been regarded as key players mediating osseointegration, increasing evidence suggests that bone-resorbing osteoclasts are of crucial importance for the longevity of applied biomaterials. As no standardized data on the resorbability of biomaterials exists, we applied an in vitro-assay to compare ten commonly used bone substitutes. Human peripheral blood mononuclear cells (PBMCs) were differentiated into osteoclasts in the co-presence of dentin chips and biomaterials or dentin alone (control) for a period of 28 days. Osteoclast maturation was monitored on day 0 and 14 by light microscopy, and material-dependent changes in extracellular pH were assessed twice weekly. Mature osteoclasts were quantified using TRAP stainings on day 28 and their resorptive activity was determined on dentin (toluidin blue staining) and biomaterials (scanning electron microscopy, SEM). The analyzed biomaterials caused specific changes in the pH, which were correlated with osteoclast multinuclearity (r = 0.942; p = 0.034) and activity on biomaterials (r = 0.594; p = 0.041). Perossal led to a significant reduction of pH, nuclei per osteoclast and dentin resorption, whereas Tutogen bovine and Tutobone human strikingly increased all three parameters. Furthermore, natural biomaterials were resorbed more rapidly than synthetic biomaterials leading to differential relative resorption coefficients, which indicate whether bone substitutes lead to a balanced resorption or preferential resorption of either the biomaterial or the surrounding bone. Taken together, this study for the first time compares the effects of widely used biomaterials on osteoclast formation and resorbability in an unbiased approach that may now aid in improving the preclinical evaluation of bone substitute materials.

Size dependent induction of proinflammatory cytokines and cytotoxicity of particulate beta-tricalciumphosphate in vitro

Cellular responses to particulate calcium phosphate ceramics can lead to inflammatory reactions under certain conditions that depend on particle composition, size and morphology. In this context, the potential influence of varying sizes of particulate beta-tricalciumphosphate (beta-TCP) on the induction of inflammation and cytotoxicity remains to be determined. The present work investigates the effects of beta-TCP particles of five different sizes (1, 3, 13, 32 and 40 μm) on human peripheral blood mononuclear cells (PBMC) in vitro concerning the release of TNF-alpha, IL-1beta and IL-8 after six and 18 h of incubation (ELISA) as well as intracellular TNF-alpha, IFN-gamma, IL-1alpha, IL-1beta and IL-8 levels within distinct PBMC subpopulations after 12 h (FACS). Potential cytotoxic effects were determined by assaying lactate dehydrogenase (LDH) and morphological analyses (electron microscopy). Beta-TCP 1 μm did not induce any cytokine after 6 h but slightly increases TNF-alpha, IL-1beta and IL-8 release after 18 h. Larger particles (32 and 40 μm) consistently caused higher levels of cytokine release by increasing the fraction of cytokine producing monocytes. They also caused higher levels of LDH release as did smaller, phagocytosable particles. These data suggest a less inflammatory and cytotoxic profile of beta-TCP devices with a smaller primary particle size when compared to larger particles.

Microstructure and biomechanical characteristics of bone substitutes for trauma and orthopaedic surgery

BACKGROUND

Many (artificial) bone substitute materials are currently available for use in orthopaedic trauma surgery. Objective data on their biological and biomechanical characteristics, which determine their clinical application, is mostly lacking. The aim of this study was to investigate structural and in vitro mechanical properties of nine bone substitute cements registered for use in orthopaedic trauma surgery in the Netherlands.

METHODS

Seven calcium phosphate cements (BoneSource®, Calcibon®, ChronOS®, Eurobone®, HydroSet™, Norian SRS®, and Ostim®), one calcium sulphate cement (MIIG® X3), and one bioactive glass cement (Cortoss®) were tested. Structural characteristics were measured by micro-CT scanning. Compression strength and stiffness were determined following unconfined compression tests.

RESULTS

Each bone substitute had unique characteristics. Mean total porosity ranged from 53% (Ostim®) to 0.5% (Norian SRS®). Mean pore size exceeded 100 μm only in Eurobone® and Cortoss® (162.2 ± 107.1 μm and 148.4 ± 70.6 μm, respectively). However, 230 μm pores were found in Calcibon®, Norian SRS®, HydroSet™, and MIIG® X3. Connectivity density ranged from 27/cm3 for HydroSet™ to 0.03/cm3 for Calcibon®. The ultimate compression strength was highest in Cortoss® (47.32 MPa) and lowest in Ostim® (0.24 MPa). Young's Modulus was highest in Calcibon® (790 MPa) and lowest in Ostim® (6 MPa).

CONCLUSIONS

The bone substitutes tested display a wide range in structural properties and compression strength, indicating that they will be suitable for different clinical indications. The data outlined here will help surgeons to select the most suitable products currently available for specific clinical indications.

Bone substitutes in the Netherlands - a systematic literature review

Autologous bone grafting is currently considered as the gold standard to restore bone defects. However, clinical benefit is not guaranteed and there is an associated 8-39% complication rate. This has resulted in the development of alternative (synthetic) bone substitutes. The aim of this systematic literature review was to provide a comprehensive overview of literature data of bone substitutes registered in the Netherlands for use in trauma and orthopedic surgery. Brand names of selected products were used as search terms in three available databases: Embase, PubMed and Cochrane. Manuscripts written in English, German or Dutch that reported on structural, biological or biomechanical properties of the pure product or on its use in trauma and orthopedic surgery were included. The primary search resulted in 475 manuscripts from PubMed, 653 from Embase and 10 from Cochrane. Of these, 218 met the final inclusion criteria. Of each product, structural, biological and biomechanical characteristics as well as their clinical indications in trauma and orthopedic surgery are provided. All included products possess osteoconductive properties but differ in resorption time and biomechanical properties. They have been used for a wide range of clinical applications; however, the overall level of clinical evidence is low. The requirements of an optimal bone substitute are related to the size and location of the defect. Calcium phosphate grafts have been used for most trauma and orthopedic surgery procedures. Calcium sulphates were mainly used to restore bone defects after tumour resection surgery but offer minimal structural support. Bioactive glass remains a potential alternative; however, its use has only been studied to a limited extent.

[Operative treatment of traumatic fractures of the thorax and lumbar spine. Part II: surgical treatment and radiological findings]

The Spine Study Group (AG WS) of the German Trauma Association (DGU) presents its second prospective Internet-based multicenter study (MCS II) for the treatment of thoracic and lumbar spinal injuries. This second part of the study report focuses on the surgical treatment, course of treatment, and radiological findings in a study population of 865 patients. A total of 158 (18,3%) thoracic, 595 (68,8%) thoracolumbar, and 112 (12,9%) lumbar spine injuries were treated. Of these, 733 patients received operative treatment (OP group). Fifty-two patients were treated non-operatively and 69 patients were treated with kyphoplasty/vertebroplasty without additional instrumentation (Plasty group). In the OP group, 380 (51.8%) patients were instrumented from a posterior (dorsal) position, 34 (4.6%) from an anterior (ventral) position, and 319 (43.5%) cases with a combined posteroanterior procedure. Angular stable internal spine fixator systems were used in 86-97% of the cases for posterior and/or combined posteroanterior procedures. For anterior procedures, angular stable plate systems were used in a majority of cases (51.1%) for the instrumentation of mainly one or two segment lesions (72.7%). In 188 cases (53,3%), vertebral body replacement implants (cages) were used and were mainly implanted via endoscopic approaches (67,4%) to the thoracic spine and/or the thoracolumbar junction. The average operating time was 152 min in posterior-, 208 min in anterior-, and 298 min in combined postero-anterior procedures (p<0,001). The average blood loss was highest in combined operations, measuring 959 ml vs. 650 ml in posterior vs. 534 ml in anterior operations (p<0,001).Computer-assisted intraoperative navigation systems were used in 95 cases. At the time of hospital admission, 58,7% of the patients had spinal canal narrowing of an average of 36% (5-95%) at the level of their injury. The average spinal canal narrowing in patients with a complete spinal cord injury (Frankel/ASIA A) was calculated to be 70%, vs. 50% in patients with incomplete neurologic deficits (Frankel/ASIA B-D), and 20% in patients without neurologic deficits (Frankel/ASIS E; p<0,001). The average procedure in the plasty treatment subgroup was 50 min (18-145 min) to address one (n=59) or two (n=10) injured vertebral bodies. In patients with nonoperative treatment mainly three-point-corsets (n=36) were administered for a duration of 6-12 weeks. During their hospital stay 93 of 195 (44,7%) patients with initial neurologic deficits improved at least one Frankel/ASIA grade until the day of discharge. Two patients (0,2%) showed a neurologic deterioration. The highest rate of complete spinal cord injury (n=36, 23%) was associated with thoracic spine injuries. Nine (1%) patients died during the initial course of treatment. A total of 105 (14,3%) cases with intraoperative (n=56) and/or postoperative complications (n=69) were registered. The most common intraoperative complication was bleeding (n=35, 4,8%). A higher relative frequency of intraoperative complications was noticed in combined (n=34, 10,7%) vs. isolated posterior (n=22, 5,9%; p=0,021) procedures. The most common postoperative complication was associated with wound healing problems in 14 (1,9%) patients. Except in the non-operative treatment subgroup, a correction of the posttraumatic measured radiological deformity was achieved to a different extent within every treatment subgroup. There were no statistically significant differences between the postoperative radiological results of the treatment subgroups (dorsal vs. combination), taking into consideration the influence of relevant parameters such as different fracture types, patient age, and the amount of posttraumatic deformity (p=0,34, ANOVA).

Proinflammatory and osteoclastogenic effects of beta-tricalciumphosphate and hydroxyapatite particles on human mononuclear cells in vitro

Particulate wear debris can activate defence cells and osteoclasts at the bone-implant interface possibly leading to bone resorption and implant failure. Cellular responses and inflammatory effects have been reported for particulate hydroxyapatite (HA). However, the immunological effects of particulate beta-tricalciumphosphate (beta-TCP) have not been studied and the question of whether beta-TCP is more biocompatible in this regard as is HA remains to be determined. Therefore the present work investigates effects of endotoxin-free HA and beta-TCP particles of the same size (d(50)=1 microm) and dose (SAR 10:1) on human peripheral blood mononuclear cells in vitro. The production of proinflammatory cytokines (TNF-alpha, IL-1beta, IL-8) and cytokines connected to osteoclast and dendritic cell differentiation (OPG, RANKL, M-CSF, GM-CSF) was determined by ELISA. After 6 and 18 h of incubation HA and beta-TCP caused a quite similar induction of TNF-alpha, IL-1beta and IL-8. Effects of particles on the production of M-CSF and OPG were not detectable. However, in sharp contrast to HA, beta-TCP caused less induction of GM-CSF and not any of RANKL, both known for promoting dendritic cells and osteoclastogenesis respectively. Therefore these in vitro data suggest that wear debris of beta-TCP poses lesser risk of the detrimental effects of osteoclast induction known from HA.

Novel maxillary reconstruction with ectopic bone formation by GMP adipose stem cells

Microvascular reconstruction is the state-of-the-art in many fields of defect surgery today. Currently, reconstruction of large bony defects involves harvesting of autologous bone causing donor site morbidity and risk of infection. Specifically, utilizing autologous adipose stem cells (autoASCs), large quantities of cells can be retrieved for cell therapy applications and the risk of tissue rejection is diminished. The authors describe the first case report of a microvascular custom-made ectopic bone flap employing good manufacturing practice (GMP) level ASCs. The patient underwent a hemimaxillectomy due to a large keratocyst. After 36 months of follow-up, the defect was reconstructed with a microvascular flap using autoASCs, beta-tricalcium phosphate and bone morphogenetic protein-2. ASCs were isolated and expanded in clean room facilities according to GMP standards and were characterized in vitro. After 8 months of follow-up, the flap had developed mature bone structures and vasculature and was transplanted into the defect area. Postoperative healing has been uneventful, and further rehabilitation with dental implants has been started. The in vitro characterization demonstrated multipotentiality and mesenchymal stem cell characteristics in ASCs. This is the first clinical case where ectopic bone was produced using autoASCs in microvascular reconstruction surgery and it will pave way for new clinical trials in the field.