Leaf prickle hairs and longitudinal grooves help wheat plants capture air moisture as a water-smart strategy for a changing climate

Effects of exogenous glycine betaine and cycloleucine on photosynthetic capacity, amino acid composition, and hormone metabolism in Solanum melongena L

Although exogenous glycine betaine (GB) and cycloleucine (Cyc) have been reported to affect animal cell metabolism, their effects on plant growth and development have not been studied extensively. Different concentrations of exogenous glycine betaine (20, 40, and 60 mmol L^-1) and cycloleucine (10, 20, and 40 mmol L^-1), with 0 mmol L^-1 as control, were used to investigate the effects of foliar spraying of betaine and cycloleucine on growth, photosynthesis, chlorophyll fluorescence, Calvin cycle pathway, abaxial leaf burr morphology, endogenous hormones, and amino acid content in eggplant. We found that 40 mmol L^-1 glycine betaine had the best effect on plant growth and development; it increased the fresh and dry weight of plants, increased the density of abaxial leaf hairs, increased the net photosynthetic rate and Calvin cycle key enzyme activity of leaves, had an elevating effect on chlorophyll fluorescence parameters, increased endogenous indoleacetic acid (IAA) content and decreased abscisic acid (ABA) content, and increased glutamate, serine, aspartate, and phenylalanine contents. However, cycloleucine significantly inhibited plant growth; plant apical dominance disappeared, plant height and dry and fresh weights decreased significantly, the development of abaxial leaf hairs was hindered, the net photosynthetic rate and Calvin cycle key enzyme activities were inhibited, the endogenous hormones IAA and ABA content decreased, and the conversion and utilization of glutamate, arginine, threonine, and glycine were affected. Combined with the experimental results and plant growth phenotypes, 20 mmol L^-1 cycloleucine significantly inhibited plant growth. In conclusion, 40 mmol L^-1 glycine betaine and 20 mmol L^-1 cycloleucine had different regulatory effects on plant growth and development.

Characterization of leaf trichomes and their influence on surface wettability of Salsola ferganica, an annual halophyte in the desert

Many organisms use functional surfaces to collect water from the atmosphere. Salsola ferganica Drob. is one of the most abundant plants in desert regions and thrives in extreme environments with multiple but limited water resources, including dew and fog; however, its mechanisms of water harvesting remain unclear. We investigated trichome structural characteristics and their influence on the surface wettability of S. ferganica leaves using a variety of approaches (scanning electron microscopy, optical microscopy, immunolabelling staining, X-ray diffractometry, and infrared spectroscopy). Microstructural observations revealed that the trichomes of S. ferganica presented a curved upper part, the 'spindle node'-like structure in the middle, and the micro-grooves structure in between; such unique structures may aid in capturing moisture from the air. The physicochemical characteristics of the trichome surface, including hydrophobic functional groups, hydrophilic pectins, and low crystallinity, may enhance the adhesion of water drops to trichomes. Furthermore, we discovered that the piliferous S. ferganica leaves were more effective in retaining water than the glabrous S. aralocaspica leaves, and the dense trichome layer exhibited a significantly unwettable surface (high contact angle with droplets), whereas the individual trichomes retained water effectively (more so under drought conditions). The combination of these two properties is consistent with the 'rose petal effect', which describes rough surfaces that are hydrophobic but exhibit high adhesion with water. These factors suggest that the evolutionary optimisation of water acquisition by coupling relevant microstructures with the physicochemical properties of trichomes enables S. ferganica to survive harsh conditions in the seedling stage.

Leaf wettability and leaf angle affect air-moisture deposition in wheat for self-irrigation

BACKGROUND

Climate change and depleting water sources demand scarce natural water supplies like air moisture to be used as an irrigation water source. Wheat production is threatened by the climate variability and extremes climate events especially heat waves and drought. The present study focused to develop the wheat plant for self-irrigation through optimizing leaf architecture and surface properties for precise irrigation.

METHODS

Thirty-four genotypes were selected from 1796 genotypes with all combinations of leaf angle and leaf rolling. These genotypes were characterized for morpho-physiological traits and soil moisture content at stem-elongation and booting stages. Further, a core set of ten genotypes was evaluated for stem flow efficiency and leaf wettability.

RESULTS

Biplot, heat map, and correlation analysis indicated wide diversity and traits association. The environmental parameters indicated substantial amount of air moisture (> 60% relative humidity) at the critical wheat growth stages. Leaf angle showed negative association with leaf rolling, physiological and yield traits, adaxial and abaxial contact angle while leaf angle showed positive association with the stem flow water. The wettability and air moisture harvesting indicated that the genotypes (coded as 1, 7, and 18) having semi-erect to erect leaf angle, spiral rolling, and hydrophilic leaf surface (<90^o) with contact angle hysteresis less than 10^o had higher soil moisture content (6-8%) and moisture harvesting efficiency (3.5 ml).

CONCLUSIONS

These findings can provide the basis to develop self-irrigating, drought-tolerant wheat cultivars as an adaptation to climate change.

Leaf rolling dynamics for atmospheric moisture harvesting in wheat plant as an adaptation to arid environments

Plant species surviving in the arid regions have developed novel leaf features to harvest atmospheric water. Before the collected water evaporates, it is absorbed and transported for storage within the tissues and move toward the root zone through the unique chemistry of leaf structures. Deep insights into such features reveal that similarities can be found in the wheat plant. Therefore, this study aimed to evaluate the leaf rolling dynamics among wheat genotypes and their relationships with moisture harvesting and its movement on the leaf surface. For this purpose, genotypes were characterized for leaf rolling at three distinct growth stages (tillering, booting, and spike emergence). The contact angle of leaf surface dynamics (adaxial and abaxial), water budget, and morphophysiological traits of genotypes were measured. The results indicate that leaf rolling varies from inward to twisting type among genotypes and positively affected the water use efficiency and soil moisture difference at all growth stages under normal and drought conditions. Results of wetting property (hydrophilic < 90°) of the leaf surface were positively associated with the atmospheric water collection (4-7 ml). The lower values of contact angle hysteresis (12-19°) also support this mechanism. Thus, genotypes with leaf rolling dynamics (inward rolled and twisted) and surface wettability is an efficient fog harvesting system in wheat for interception and utilization of fog water in drought-prone areas. These results can be exploited to develop self-irrigated and drought-tolerant crops.

Wetting mechanism and morphological adaptation; leaf rolling enhancing atmospheric water acquisition in wheat crop-a review

Several plant species such as grasses are dominant in many habitats including arid and semi-arid areas. These species survive in these regions by developing exclusive structures, which helps in the collection of atmospheric water. Before the collected water evaporates, these structures have unique canopy structure for water transportation that plays an equivalent share in the fog-harvesting mechanism. In this review, the atmospheric gaseous water harvesting mechanisms and their affinity of measurements were discussed. Morphological adaptations and their role in the capturing of atmospheric gaseous water of various species were also discussed. The key factor for the water collection and its conduction in the wheat plant is the information of contact angle hysteresis. In wheat, leaf rolling and its association with wetting property help the plant in water retention. Morphological adaptations, i.e., leaf erectness, grooves, and prickle hairs, also help in the collection and acquisition of water droplets by stem flows in directional guide toward the base of the plant and allow its rapid uptake. Morphological adaptation strengthens the harvesting mechanism by preventing the loss of water through shattering. Thus, wheat canopy architecture can be modified to harvest the atmospheric water and directional movement of water towards the root zone for self-irrigation. Moreover, these morphological adaptations are also linked with drought avoidance and corresponding physiological processes to resist water stress. The combination of these traits together with water use efficiency in wheat contributes to a highly efficient atmospheric water harvesting system that enables the wheat plants to reduce the cost of production. It also increases the yielding potential of the crop in arid and semi-arid environments. Further investigating the ecophysiology and molecular pathways of these morphological adaptations in wheat may have significant applications in varying climatic scenarios.

New approaches with ATR-FTIR, SEM, and contact angle measurements in the adaptation to extreme conditions of some endemic Gypsophila L. taxa growing in gypsum habitats

Gypsophila L. taxa growing on gypsum soils have to withstand limiting and restrictive conditions for plant life. This study aims to identify functional mechanisms determine the main functional groups in the vegetative and reproductive organs of some endemic Gypsophila taxa growing in gypsum soils, as well as to understand the relationship between the hidrophobicities and their micromorphological structures of the leaves of these plants grown in arid conditions. In this context, a series of Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR), water contact angle (CA) measurements, and scanning electron microscopy (SEM) analyses were performed that may help to understand the survival mechanisms of Gypsophila eriocalyx Boiss., Gypsophila germanicopolitana Hub.-Mor. and Gypsophila simonii Hub.-Mor. growing in gypsum habitats. Our results showed the presence of O-H and C-O stretching bands belong to gypsum and calcium oxalate in the roots, stems, leaves and flowers of Gypsophila taxa is thought to be a way of tolerating the excess Ca and sulphate in the extreme habitat where these species grow. Leaves of Gypsophila taxa showed CAs above 90°, which indicates that G. eriocalyx, G. germanicopolitana, and G. simonii were hydrophobic. This study offers new approaches to understanding the adaptation of Gypsophila taxa to the extreme conditions typical of gypsum soils. The characterization of gypsum plants such as Gypsophila taxa, whose mechanisms for competition and survival on gypsum are still not fully understood, is very important in terms of shedding light on the adaptation of endemic plants to gypsum habitats.

The Use of Soil Conditioners to Ensure a Sustainable Wheat Yield under Water Deficit Conditions by Enhancing the Physiological and Antioxidant Potentials

Traditional mulch material (farmyard manure) has long been used in agriculture. However, recent developments have also introduced the scientific community and farmers to advanced chemicals such as potassium polyacrylamide (KPAM), which has revolutionised the concept of the soil water-holding capacity to many compared with other materials being used. To compare the effect of different organic and inorganic soil amendment materials under water stress conditions, a two-year (2018 and 2019) field study was conducted. The main plots consisted of irrigation treatments, i.e., I0 (control irrigation), I1 (drought-induced by skipping irrigation at the 4th leaf stage), and I2 (drought-induced by skipping irrigation at the anthesis stage). The subplots included a control treatment and soil amended with different conditioners such as potassium polyacrylamide (KPAM, 30 kg/ha), farmyard manure (FYM, 4 tons/ha), and biochar (10 tons/ha); these were mixed thoroughly with the soil before sowing. The results showed a significant reduction in the water relation parameters (water potential up to 35.77% and relative water content up to 21%), gas exchange parameters (net CO2 assimilation rate up to 28.85%, stomatal conductance up to 43.18%, and transpiration rate up to 49.07%), and yield attributes (biological yield up to 8.45% and grain yield up to 32.22%) under drought stress conditions. In addition, water stress also induced an increase in the synthesis of osmoprotectants (proline up to 77.74%, total soluble sugars up to 27.43%, and total free amino acids up to 11.73%). Among all the soil conditioners used, KPAM significantly reduced the negative effects of drought stress on the wheat plants. Thus, it could be concluded that the use of soil conditioners is a promising method for dealing with the negative consequences of drought stress for achieving sustainable crop yields.