Morphological study of the labial sensilla in Nabidae (Hemiptera: Heteroptera: Cimicomorpha)

Microstructural Adaptation for Prey Manipulation in the Millipede Assassin Bugs (Hemiptera: Reduviidae: Ectrichodiinae)

Species in Ectrichodiinae are known for their prey specialization on millipedes. However, knowledge of the morphological adaptations to this unique feeding habit was limited. In the current study, we examined the microstructures of the antennae, mouthparts, and legs of four millipede feeding ectrichodiines, Ectrychotes andreae (Thunberg, 1888), Haematoloecha limbata Miller, 1953, Labidocoris pectoralis (Stål, 1863), and Neozirta eidmanni (Taueber, 1930), and compared them with those of three species of tribelocephalines, a group closely related to Ectrichodiinae. On the antennae, we found four types of antennal sensilla. On the mouthparts, we recognized four types of labial sensilla. Sampled ectrichodiines have distinctly more and denser slightly transverse ridges on the external side of mandibles than tribelocephalines. E. andreae and H. limbata possess numerous small papillae fringed with densely arranged finger-print-like grains on the trochanter and femur; these probably facilitate the immobilization of prey. Overall, our study illustrates, at a microstructural level, the remarkable morphological adaption of prey manipulation in ectrichodiine, and has enhanced our understanding about stenophagy in the family Reduviidae.

Gustation in insects: taste qualities and types of evidence used to show taste function of specific body parts

The insect equivalent of taste buds are gustatory sensilla, which have been found on mouthparts, pharynxes, antennae, legs, wings, and ovipositors. Most gustatory sensilla are uniporous, but not all apparently uniporous sensilla are gustatory. Among sensilla containing more than one neuron, a tubular body on one dendrite is also indicative of a taste sensillum, with the tubular body adding tactile function. But not all taste sensilla are also tactile. Additional morphological criteria are often used to recognize if a sensillum is gustatory. Further confirmation of such criteria by electrophysiological or behavioral evidence is needed. The five canonical taste qualities to which insects respond are sweet, bitter, sour, salty, and umami. But not all tastants that insects respond to easily fit in these taste qualities. Categories of insect tastants can be based not only on human taste perception, but also on whether the response is deterrent or appetitive and on chemical structure. Other compounds that at least some insects taste include, but are not limited to: water, fatty acids, metals, carbonation, RNA, ATP, pungent tastes as in horseradish, bacterial lipopolysaccharides, and contact pheromones. We propose that, for insects, taste be defined not only as a response to nonvolatiles but also be restricted to responses that are, or are thought to be, mediated by a sensillum. This restriction is useful because some of the receptor proteins in gustatory sensilla are also found elsewhere.

Ultrastructure of a Mechanoreceptor of the Trichoid Sensilla of the Insect Nabis rugosus: Stimulus-Transmitting and Bio-Sensory Architecture

This paper presents the ultrastructure morphology of Nabis rugosus trichoid sensilla using SEM and TEM data, along with a two-dimensional model of the trichoid sensilla developed in Amira software. The SEM images show the shape and scattering of the trichoid mechanosensilla over the N. rugosus flagellomere. The TEM images present the ultrastructural components, in which the hair rises from the socket via the joint membrane. The dendrite sheath is connected at the base of the hair shaft, surrounded by the lymph space and the socket septum. This dendrite sheath contains a tubular body with microtubules separated by the membrane (M) and granules (Gs). This study presents a model and simulation of the trichoid sensilla sensing mechanism, in which the hair deflects due to the application of external loading above it and presses the dendrite sheath attached to the hair base. The dendrite sheath is displaced by the applied force, transforming the transversal loading into a longitudinal deformation of the microtubules. Due to this longitudinal deformation, electric potential develops in the microtubule's core, and information is delivered to the brain through the axon. The sensilla's pivot point or point of rotation is presented, along with the relationship between the hair shaft length, the pivot point, and the electric potential distribution in the microtubules. This study's results can be used to develop ultra-sensitive, bioinspired sensors based on these ultrastructural components and their biomechanical studies.

Labial Sensory Organs of Two Leptoglossus Species (Hemiptera: Coreidae): Their Morphology and Supposed Function

A detailed description of the labial sensory organs of Leptoglossus occidentalis Heidemann, 1910 and L. zonatus (Dallas, 1852) (Hemiptera: Heteroptera: Coreidae) is presented. The detailed morphology, location, and distribution of different sensilla types on mouthparts were investigated and shown in micrographs taken with a scanning electron microscope. Nine types of aporous sensilla, and three uniporous sensilla were found. The possible functions of these sensilla as well as similarities and differences between the mouthparts of Leptoglossus and those of other terrestrial Heteroptera are discussed. The tip of the labium constitutes a functional "touch and taste area", combining the chemosensitivity of uniporous sensilla P1-P3 and the mechanoreceptivity of A8 and A9 hair-like sensilla. A set of two cone-like chemosensilla types (9 + 2) was found on each lateral lobe of the labial tip. Literature analysis showed that such a set of cone-like sensory organs on the labial tip may be common in terrestrial Heteroptera. This observation confirms that the number and arrangement of sensilla is conservative and can be important in diagnosing taxa at various levels and in phylogenetic studies based on morphology.

Ultra-Morphology and Mechanical Function of the Trichoideum Sensillum in Nabis rugosus (Linnaeus, 1758) (Insecta: Heteroptera: Cimicomorpha)

The present study aims to investigate the morphological features of the antennal sensilla by using SEM and TEM. The construction of a 3D model of trichoideum sensillum using Amira software is presented in this paper. Five sensillum types, namely trichoideum, chaeticum, campaniformium, coeloconicum, and basiconicum, were recorded. This model exhibits the mechanosensillum components, including the embedded hair in a socket attached by the joint membrane and the dendrite connected to the hair base passing through the cuticle layers. TEM images present the dendrite way, micro-tubules inside the dendritic sheath, and terminal structure of the tubular dendrite body and so-called companion cells included in the receptor, e.g., tormogen and trichogen. The parameters noted for the external structure and ultrastructure of the mechano-receptor indicate that they are specific to a particular type of sensillum and would be useful in developing the model for a biosensor. Results show that bio-inspired sensors can be developed based on morphological and ultrastructural studies and to conduct mechanical studies on their components.

Revision and Phylogenetic Analysis of the Genus Phonoctonus Stål, 1853 (Heteroptera, Reduviidae, Harpactorinae)

This paper presents a taxonomic revision and phylogenetic analysis of nine known species of the genus Phonoctonus Stål, 1853, distributed exclusively in the Afrotropical region. The revision and phylogenetic analysis were performed using morphological data. A full redescription for all species is provided, taxonomical problems are clarified, and diagnostic characters are presented and illustrated. Based on the analysis, thirteen species are recognised as valid: Phonoctonus bifasciatus stat. nov., P. caesar, P. elegans, P. fairmairei stat. nov., P. fasciatus, P. grandis, P. immitis stat. rev., P. luridus, P. lutescens, P. nigrofasciatus stat. rev., P. picta stat. nov., P. picturatus stat. rev., and P. principalis. New synonymies are proposed: Phonoctonus nigrofasciatus= P. fasciatus var. poultoni syn. nov., P. picturatus = P. fasciatus var. discalis syn. nov., and P. principalis = P. validus syn. nov. An identification key to separate the species, drawings of dorsal habitus, and distribution maps of all valid species are presented. Performed morphological phylogenetic analyses indicate monophyly of the genus Phonoctonus.

Comparative Morphology of the Mouthparts in Three Predatory Stink Bugs (Heteroptera: Asopinae) Reveals Feeding Specialization of Stylets and Sensilla

Mouthpart structures were observed in three species of Asopinae using scanning electron microscopy to investigate their morphological disparity. The examined species attack mainly slow-moving, soft-bodied insects, primarily larval forms of the Lepidoptera, and are the natural enemies of many pests. This is the first detailed description of their external mouthparts. The triangular and elongated labrum and four-segmented tube-like labium are longer in Picromerus species (Picromerus bidens (Linnaeus, 1758) and Picromerus lewisi Scott, 1874 than in Cazira bhoutanica Schouteden, 1907. The labrum of P. lewisi and C. bhoutanica appear to be equipped with olfactory sensilla basiconica Sb3, a special type of sensilla with nanopores. The labium surface in all studied species bears 14 types of sensilla (St1-St4, Sb1-7, Sst, Sca1-2). A new characteristic of sensilla trichodea is represented in sensillum St1; in both Picromerus species, it is classified as an olfactory sensillum with nanopores. The tripartite apex of the labium consists of two lateral lobes and a central membranous lobe having microtrichial extensions. Each lobe has one sensory field, including sensilla basiconica (Sb7), sensilla styloconica (Sst), and sensilla trichodea (St4). In the three studied predatory stink bugs, each mandibular stylet tip has five irregular teeth and three long, pointed hooks. The two opposing maxillae, which are held together by a tongue-and-groove system, form a food canal and a salivary canal. The apices of the right maxilla have small teeth and few short barbs along the edge of the food canal. In P. bidens and P. lewisi, there are 5 teeth, while in C. bhoutanica there are 2. Based on structural differences, we inferred that the hook-shaped mandibular teeth, right maxilla with small teeth, and few short barbs along edge of the food canal are more adapted for a predatory lifestyle. Predatory stink bugs use sharp recurved hooks and irregular teeth penetrating, tearing, or filing devices that aid in the mechanical disruption of host tissue. Stiff bristles in the food canal may indicate their possible adaptation to feeding on insect larvae. The evolution of mouthpart morphology and the putative functional significance of sensilla are discussed, providing insight into the sensory mechanism.

Unique Fine Morphology of Mouthparts in Haematoloecha nigrorufa (Stål) (Hemiptera: Reduviidae) Adapted to Millipede Feeding

Millipede assassin bugs are a diverse group of specialized millipede predators. However, the feeding behavior of Ectrichodiinae remains poorly known, especially how the mouthpart structures relate to various functions in feeding. In this study, fine morphology of the mouthparts and feeding performance of Haematoloecha nigrorufa (Stål, 1867) was observed and described in detail for the first time. The triangular labrum is divided by a conspicuous transverse membrane into a strongly sclerotized basilabrum and a less sclerotized distilabrum. Fifteen types of sensilla are distributed on the mouthparts. Each mandibular stylet has an expanded spatulate apex and about 150 approximately transverse ridges on the external middle side; these help in penetrating the ventral trunk area and the intersegmental membranes of millipede prey. The right maxilla is tapered. On the internal surface are a row dorsal short bristles near the apex and a row of ventral bristles preapically. A longitudinal row of long lamellate structures extend proximate for a considerable distance, lie entirely within the food canal, and bear several short spines and short bristles. There is no obvious difference between males and females in the distribution, number, and types of sensilla on mouthparts. The adult feeding process involves several steps, including searching and capturing prey, paralyzing prey, a resting phase, and a feeding phase. The evolution of the mouthpart morphology and the putative functional significance of their sensilla are discussed, providing insight into the structure and function of the mouthparts adapted for millipede feeding.