Genetic distribution of Bare-1-like retrotransposable elements in the barley genome revealed by sequence-specific amplification polymorphisms (S-SAP)

Genetic marker: a genome mapping tool to decode genetic diversity of livestock animals

Genotyping is the process of determining the genetic makeup of an organism by examining its DNA sequences using various genetic markers. It has been widely used in various fields, such as agriculture, biomedical and conservation research, to study genetic diversity, inheritance, the genetic basis of disease-associated traits, evolution, adaptation, etc., Genotyping markers have evolved immensely and are broadly classified as random markers (RFLP, RAPD, AFLP, etc.) and functional markers (SCoT, CDDP, SRAP, etc.). However, functional markers are very limited in genotype studies, especially in animal science, despite their advantages in overcoming the limitations of random markers, which are directly linked with phenotypic traits, high specificity, and similar logistic requirements. The current review surveyed the available random and functional markers for genotyping applications, focusing on livestock including plant and microbe domains. This review article summarises the application, advantages, and limitations of developed markers and methods for genotyping applications. This review aims to make the reader aware of all available markers, their design principles, and methods, and we discuss the marker inheritance patterns of RLFP and AFLP. The review further outlines the marker selection for particular applications and endorses the application of functional markers in genotyping research.

Old but still good: genetic diversity of ancient pecan genotypes from southern Brazil

Pecan [Carya illinoinensis (Wangenh.) K. Koch] is a crop fruit native to the USA and Mexico currently cultivated in several countries, including Brazil, Uruguay, Argentina, Chile, Peru, China, South Africa, and Australia. Supported by the increasing consumption and market prices, the interest in the cultivation of this fruit crop is strongly growing around the world. In this study, AFLP and S-SAP markers were employed to characterize the genetic diversity of ancient accessions of pecan from southern Brazil. The evaluated plants were selected and preserved by the farmers and are remnants of the first introduction of seedlings from the U.S.A into southern Brazil aiming at developing research towards establishing commercial orchards. High levels of genetic diversity were estimated, suggesting that these plants have an important genetic background for the establishment of a germplasm collection with a wide genetic basis, for the development of breeding programs for this fruit crop. Cluster analysis of the genetic datasets revealed some correlation between the nuts' morphometric traits and genetic markers. Such correlation should be further exploited. These ancient genotypes must be evaluated for other agronomic traits of interest and included in core collections of pecans.

The comparison of polymorphism among Avena species revealed by retrotransposon-based DNA markers and soluble carbohydrates in seeds

Here, we compared the polymorphism among 13 Avena species revealed by the iPBS markers and soluble carbohydrate profiles in seeds. The application of seven iPBS markers generated 83 bands, out of which 20.5% were polymorphic. No species-specific bands were scored. Shannon's information index (I) and expected heterozygosity (He) revealed low genetic diversity, with the highest values observed for A. nuda (I = 0.099; He = 0.068). UPGMA clustering of studied Avena accessions and PCoA results showed that the polyploidy level is the main grouping criterion. High-resolution gas chromatography revealed that the studied Avena accessions share the same composition of soluble carbohydrates, but significant differences in the content of total (5.30-22.38 mg g-1 of dry weight) and particular sugars among studied samples were observed. Sucrose appeared as the most abundant sugar (mean 61.52% of total soluble carbohydrates), followed by raffinose family oligosaccharides (31.23%), myo-inositol and its galactosides (6.16%), and monosaccharides (1.09%). The pattern of interspecific variation in soluble carbohydrates, showed by PCA, was convergent to that revealed by iPBS markers. Thus, both methods appeared as a source of valuable data useful in the characterization of Avena resources or in the discussion on the evolution of this genus.

TrEMOLO: accurate transposable element allele frequency estimation using long-read sequencing data combining assembly and mapping-based approaches

Transposable Element MOnitoring with LOng-reads (TrEMOLO) is a new software that combines assembly- and mapping-based approaches to robustly detect genetic elements called transposable elements (TEs). Using high- or low-quality genome assemblies, TrEMOLO can detect most TE insertions and deletions and estimate their allele frequency in populations. Benchmarking with simulated data revealed that TrEMOLO outperforms other state-of-the-art computational tools. TE detection and frequency estimation by TrEMOLO were validated using simulated and experimental datasets. Therefore, TrEMOLO is a comprehensive and suitable tool to accurately study TE dynamics. TrEMOLO is available under GNU GPL3.0 at https://github.com/DrosophilaGenomeEvolution/TrEMOLO .

TEMM: A Curated Data Resource for Transposon Element-Based Molecular Markers in Plants

Transposon elements (TEs) are mobile genetic elements that can insert themselves into new locations and modify the plant genome. In recent years, they have been used as molecular markers in plant breeding programs. TE-based molecular markers (TE-markers) are divided into two categories depending on the transcription mechanism of the TEs. The first category is retrotransposon-based molecular markers, which include RBIP, IRAP, REMAP, and iPBS. The second group is DNA-based-TE-markers, which include MITE, TE-junction, and CACTA TE-markers. These markers are a good tool for studying genetic diversity and can provide information on plants' phylogenetic and evolutionary history. They can help improve breeding programs to increase agronomic traits and develop new varieties. Overall, TE-markers play an important role in plant genetics and plant breeding and contribute to a better understanding of plant biology. Here, we present TEMM, a curated data resource for TE-markers in plants. Relevant research articles were screened to collect primer sequences and related information. Only articles containing primer sequences are added to the present data resource. TEMM contains 784 primers with their associated PCR reaction programs and their applications in various crops. These include 203 IPBS, 191 RBIP, 140 IRAP, 78 TE-junction, 76 IRAPS, 47 RBIP-IRAP, 16 IRAP-REMAP, 12 REMAP, 12 REMA-IRAP, 6 REMA, and 3 ISBP primers. The data resource is freely available at https://bioinformatics.um6p.ma/TEMM .

Retrotransposons: How the continuous evolutionary front shapes plant genomes for response to heat stress

Long terminal repeat retrotransposons (LTR retrotransposons) are the most abundant group of mobile genetic elements in eukaryotic genomes and are essential in organizing genomic architecture and phenotypic variations. The diverse families of retrotransposons are related to retroviruses. As retrotransposable elements are dispersed and ubiquitous, their "copy-out and paste-in" life cycle of replicative transposition leads to new genome insertions without the excision of the original element. The overall structure of retrotransposons and the domains responsible for the various phases of their replication is highly conserved in all eukaryotes. The two major superfamilies of LTR retrotransposons, Ty1/Copia and Ty3/Gypsy, are distinguished and dispersed across the chromosomes of higher plants. Members of these superfamilies can increase in copy number and are often activated by various biotic and abiotic stresses due to retrotransposition bursts. LTR retrotransposons are important drivers of species diversity and exhibit great variety in structure, size, and mechanisms of transposition, making them important putative actors in genome evolution. Additionally, LTR retrotransposons influence the gene expression patterns of adjacent genes by modulating potential small interfering RNA (siRNA) and RNA-directed DNA methylation (RdDM) pathways. Furthermore, comparative and evolutionary analysis of the most important crop genome sequences and advanced technologies have elucidated the epigenetics and structural and functional modifications driven by LTR retrotransposon during speciation. However, mechanistic insights into LTR retrotransposons remain obscure in plant development due to a lack of advancement in high throughput technologies. In this review, we focus on the key role of LTR retrotransposons response in plants during heat stress, the role of centromeric LTR retrotransposons, and the role of LTR retrotransposon markers in genome expression and evolution.

A review of strategies used to identify transposition events in plant genomes

Transposable elements (TEs) were initially considered redundant and dubbed 'junk DNA'. However, more recently they were recognized as an essential element of genome plasticity. In nature, they frequently become active upon exposition of the host to stress conditions. Even though most transposition events are neutral or even deleterious, occasionally they may happen to be beneficial, resulting in genetic novelty providing better fitness to the host. Hence, TE mobilization may promote adaptability and, in the long run, act as a significant evolutionary force. There are many examples of TE insertions resulting in increased tolerance to stresses or in novel features of crops which are appealing to the consumer. Possibly, TE-driven de novo variability could be utilized for crop improvement. However, in order to systematically study the mechanisms of TE/host interactions, it is necessary to have suitable tools to globally monitor any ongoing TE mobilization. With the development of novel potent technologies, new high-throughput strategies for studying TE dynamics are emerging. Here, we present currently available methods applied to monitor the activity of TEs in plants. We divide them on the basis of their operational principles, the position of target molecules in the process of transposition and their ability to capture real cases of actively transposing elements. Their possible theoretical and practical drawbacks are also discussed. Finally, conceivable strategies and combinations of methods resulting in an improved performance are proposed.

Development of molecular markers based on LTR retrotransposon in the Cleistogenes songorica genome

Long terminal repeat retrotransposons (LTR-RTs) contribute a large fraction of many sequenced plant genomes and play important roles in genomic diversity and phenotypic variations. LTR-RTs are abundantly distributed in plant genomes, facilitating the development of markers based on LTR-RTs for a variety of genotyping purposes. Whole-genome analysis of LTR-RTs was performed in Cleistogenes songorica. A total of 299,079 LTR-RTs were identified and classified as Gypsy type, Copia type, or other type. LTR-RTs were widely distributed in the genome, enriched in the heterochromatic region of the chromosome, and negatively correlated with gene distribution. However, approximately one-fifth of genes were still interrupted by LTR-RTs, and these genes are annotated. Furthermore, four types of primer pairs (PPs) were designed, namely, retrotransposon-based insertion polymorphisms, inter-retrotransposon amplified polymorphisms, insertion site-based polymorphisms, and retrotransposon-microsatellite amplified polymorphisms. A total of 350 PPs were screened in 23 accessions of the genus Cleistogenes, of which 80 PPs showed polymorphism, and 72 PPs showed transferability among Gramineae and non-Gramineae species. In addition, a comparative analysis of homologous LTR-RTs was performed with other related grasses. Taken together, the study will serve as a valuable resource for genotyping applications for C. songorica and related grasses.

Androgenic-Induced Transposable Elements Dependent Sequence Variation in Barley

A plant genome usually encompasses different families of transposable elements (TEs) that may constitute up to 85% of nuclear DNA. Under stressful conditions, some of them may activate, leading to sequence variation. In vitro plant regeneration may induce either phenotypic or genetic and epigenetic changes. While DNA methylation alternations might be related, i.e., to the Yang cycle problems, DNA pattern changes, especially DNA demethylation, may activate TEs that could result in point mutations in DNA sequence changes. Thus, TEs have the highest input into sequence variation (SV). A set of barley regenerants were derived via in vitro anther culture. High Performance Liquid Chromatography (RP-HPLC), used to study the global DNA methylation of donor plants and their regenerants, showed that the level of DNA methylation increased in regenerants by 1.45% compared to the donors. The Methyl-Sensitive Transposon Display (MSTD) based on methylation-sensitive Amplified Fragment Length Polymorphism (metAFLP) approach demonstrated that, depending on the selected elements belonging to the TEs family analyzed, varying levels of sequence variation were evaluated. DNA sequence contexts may have a different impact on SV generated by distinct mobile elements belonged to various TE families. Based on the presented study, some of the selected mobile elements contribute differently to TE-related SV. The surrounding context of the TEs DNA sequence is possibly important here, and the study explained some part of SV related to those contexts.

Palindromic Sequence-Targeted (PST) PCR, Version 2: An Advanced Method for High-Throughput Targeted Gene Characterization and Transposon Display

Genome walking (GW), a strategy for capturing previously unsequenced DNA fragments that are in proximity to a known sequence tag, is currently predominantly based on PCR. Recently developed PCR-based methods allow for combining of sequence-specific primers with designed capturing primers capable of annealing to unknown DNA targets, thereby offering the rapidity and effectiveness of PCR. This study presents a methodological improvement to the previously described GW technique known as palindromic sequence-targeted PCR (PST-PCR). Like PST-PCR, this new method (called PST-PCR v.2) relies on targeting of capturing primers to palindromic sequences arbitrarily present in natural DNA templates. PST-PCR v.2 consists of two rounds of PCR. The first round uses a combination of one sequence-specific primer with one capturing (PST) primer. The second round uses a combination of a single (preferred) or two universal primers; one anneals to a 5' tail attached to the sequence-specific primer and the other anneals to a different 5' tail attached to the PST primer. The key advantage of PST-PCR v.2 is the convenience of using a single universal primer with invariable sequences in GW processes involving various templates. The entire procedure takes approximately 2-3 h to produce the amplified PCR fragment, which contains a portion of a template flanked by the sequence-specific and capturing primers. PST-PCR v.2 is highly suitable for simultaneous work with multiple samples. For this reason, PST-PCR v.2 can be applied beyond the classical task of GW for studies in population genetics, in which PST-PCR v.2 is a preferred alternative to amplified fragment length polymorphism (AFLP) or next-generation sequencing. Furthermore, the conditions for PST-PCR v.2 are easier to optimize, as only one sequence-specific primer is used. This reduces non-specific random amplified polymorphic DNA (RAPD)-like amplification and formation of non-templated amplification. Importantly, akin to the previous version, PST-PCR v.2 is not sensitive to template DNA sequence complexity or quality. This study illustrates the utility of PST-PCR v.2 for transposon display (TD), which is a method to characterize inter- or intra-specific variability related to transposon integration sites. The Ac transposon sequence in the maize (Zea mays) genome was used as a sequence tag during the TD procedure to characterize the Ac integration sites.

Transposon-Based Tagging In Silico Using FastPCR Software

Retrotransposons are ubiquitous, generally dispersed components of eukaryotic genomes. These properties, together with their "copy and paste" lifecycle that generates insertional polymorphism without need for excision, makes them widely useful as a molecular-genetic tags. Various tagging systems have been developed that exploit the sequence conservation of retrotransposon components, such as those found in their long terminal repeats (LTRs). To detect polymorphisms for retrotransposon insertions, marker systems generally rely on PCR amplification between the termini and some component of flanking genomic DNA. As complements to various "wet lab" protocols for retrotransposon tagging, in silico bioinformatics approaches are useful for predicting likely outcomes from unsequenced accessions on the basis of reference genomes. In this chapter, we describe protocols for in silico retrotransposon-based fingerprinting techniques using the FastPCR software as an integrated tools environment for in silico PCR primer design and analysis.

Retrotransposable Elements: DNA Fingerprinting and the Assessment of Genetic Diversity

Retrotransposable elements (RTEs) are highly common mobile genetic elements that are composed of several classes and make up the majority of eukaryotic genomes. The "copy-out and paste-in" life cycle of replicative transposition in these dispersive and ubiquitous RTEs leads to new genome insertions without excision of the original element. RTEs are important drivers of species diversity; they exhibit great variety in structure, size, and mechanisms of transposition, making them important putative components in genome evolution. Accordingly, various applications have been developed to explore the polymorphisms in RTE insertion patterns. These applications include conventional or anchored polymerase chain reaction (PCR) and quantitative or digital PCR with primers designed for the 5' or 3' junction. Marker systems exploiting these PCR methods can be easily developed and are inexpensively used in the absence of extensive genome sequence data. The main inter-repeat amplification polymorphism techniques include inter-retrotransposon amplified polymorphism (IRAP), retrotransposon microsatellite amplified polymorphism (REMAP), and Inter-Primer Binding Site (iPBS) for PCR amplification with a single or two primers.

DNA profiling and assessment of genetic diversity of relict species Allium altaicum Pall. on the territory of Altai

Analysis of the genetic diversity of natural populations of threatened and endangered species of plants is a main aspect of conservation strategy. The endangered species Allium altaicum is a relict plant of the Ice Age and natural populations are located in extreme climatic conditions of Kazakstan's Altai Mountains. Mobile genetic elements and other interspersed repeats are basic components of a eukaryote genome, which can activate under stress conditions and indirectly promote the survival of an organism against environmental stresses. Detections of chromosomal changes related to recombination processes of mobile genetic elements are performed by various PCR methods. These methods are based on interspersed repeat sequences and are an effective tool for research of biological diversity of plants and their variability. In our research, we used conservative sequences of tRNA primer binding sites (PBS) when initializing the retrotransposon replication as PCR primers to research the genetic diversity of 12 natural populations of A. altaicum found in various ecogeographic conditions of the Kazakhstani Altai. High efficiency of the PBS amplification method used was observed already at the intrapopulation level. Unique amplicons representative of a certain population were found at the intrapopulation level. Analysis of molecular dispersion revealed that the biodiversity of populations of mountainous and lowland A. altaicum is due to intrapopulation differences for climatic zones of habitation. This is likely conditional upon predominance of vegetative reproduction over seed reproduction in some populations. In the case of vegetative reproduction, somatic recombination related to the activity of mobile genetic elements are preserved in subsequent generations. This leads to an increase of intrapopulation genetic diversity. Thus, high genetic diversity was observed in populations such as A. altaicum located in the territory of the Kalbinskii Altai, whereas the minimum diversity was observed in the populations of the Leninororsk ecogeographic group. Distinctions between these populations were also identified depending on the areas of their distribution. Low-land and mid-mountain living environments are characterized by a great variety of shapes and plasticity. This work allowed us to obtain new genetic data on the structure of A. altaicum populations on the territory of the Kazakhstan Altai for the subsequent development of preservation and reproduction strategies for this relict species.

Amplified Fragment Length Polymorphism: Applications and Recent Developments

AFLP or amplified fragment length polymorphism is a PCR-based molecular technique that uses selective amplification of a subset of digested DNA fragments from any source to generate and compare unique fingerprints of genomes. It is more efficient in terms of time, economy, reproducibility, informativeness, resolution, and sensitivity, compared to other popular DNA markers. Besides, it requires very small quantities of DNA and no prior genome information. This technique is widely used in plants for taxonomy, genetic diversity, phylogenetic analysis, construction of high-resolution genetic maps, and positional cloning of genes, to determine relatedness among cultivars and varietal identity, etc. The review encompasses in detail the various applications of AFLP in plants and the major advantages and disadvantages. The review also considers various modifications of this technique and novel developments in detection of polymorphism. A wet-lab protocol is also provided.

Comparative Study of Pine Reference Genomes Reveals Transposable Element Interconnected Gene Networks

Sequencing the giga-genomes of several pine species has enabled comparative genomic analyses of these outcrossing tree species. Previous studies have revealed the wide distribution and extraordinary diversity of transposable elements (TEs) that occupy the large intergenic spaces in conifer genomes. In this study, we analyzed the distribution of TEs in gene regions of the assembled genomes of Pinus taeda and Pinus lambertiana using high-performance computing resources. The quality of draft genomes and the genome annotation have significant consequences for the investigation of TEs and these aspects are discussed. Several TE families frequently inserted into genes or their flanks were identified in both species’ genomes. Potentially important sequence motifs were identified in TEs that could bind additional regulatory factors, promoting gene network formation with faster or enhanced transcription initiation. Node genes that contain many TEs were observed in multiple potential transposable element-associated networks. This study demonstrated the increased accumulation of TEs in the introns of stress-responsive genes of pines and suggests the possibility of rewiring them into responsive networks and sub-networks interconnected with node genes containing multiple TEs. Many such regulatory influences could lead to the adaptive environmental response clines that are characteristic of naturally spread pine populations.

Assessment of genetic diversity of cultivated and wild Iranian grape germplasm using retrotransposon-microsatellite amplified polymorphism (REMAP) markers and pomological traits

Understanding the genetic diversity and relationships between genotypes is an effective step in designing effective breeding programs. Insertional polymorphisms of retrotransposons were studied in 75 cultivated and wild grape genotypes using retrotransposon-microsatellite amplified polymorphism (REMAP) technique. In the morphological part of work, seven pomological traits with a high breeding interest were also analyzed in the cultivated genotypes. A total of 328 markers were produced by 42 primer pairs, out of which 313 markers (95.43%) were polymorphic. Number of markers ranged from 4 in loci Tvv1Fa-873, Vine1-811, Gret1Ra-855 and Tvv1Fa-890 to 12 in locus Vine1Ra-841 with an average value of 7.45. Similarity values based on Dice's coefficient among all 75 grapevine genotypes varied from 0.41 to 0.77. Classification of genotypes using unweighted pair-group method using complete-linkage clustering led to six distinct groups. Some wild and cultivated varieties placed in the same groups. It seems there are close relationship between wild and cultivated genotypes and maybe wild genotypes are ancestor of native grapevines. Grouping of grapevine genotypes based on molecular marker data was not in agreement with clustering by agro-morphological data indicating that the most of multiplied sequences are confined to the non-coding regions of transposon elements. Results showed a substantial level of genetic diversity at molecular and pomological level and the potential of this diversity for future grape breeding programs.

Development of genome wide transposable elements based repeat junction markers in Jatropha (Jatropha curcas L.)

Jatropha curcas is a potential biodiesel crop and a highly adaptable species to various agro-climatic conditions. In this study, we have utilized transposable elements' (TE) repeat junctions (RJs) which are an important constituent of the genome, used to form a genome-wide molecular marker platform owing to its use in genomic studies of plants. We screened our previously generated Jatropha hybrid genome assembly of size 265 Mbp using RJPrimers pipeline software and identified a total of 1274 TE junctions. For the predicted RJs, we designed 2868 polymerase chain reaction (PCR) based RJ markers (RJMs) flanking the junction regions. In addition to marker design, the identified RJs were utilized to detect 225,517 TEs across the genome. The different types of transposable repeat elements mainly were scattered into Retro, LTR, Copia and Gypsy categories. The efficacy of the designed markers was tested by utilizing a subset of RJMs selected randomly. We have validated 96 randomly selected RJ primers in a group of 32 J. curcas genotypes and more than 90% of the markers effectively intensified as amplicons. Of these, 10 primers were shown to be polymorphic in estimating genetic diversity among the 32 Jatropha lines. UPGMA cluster analysis revealed the formation of two clusters such as A and B exhibiting 85.5% and 87% similarity coefficient respectively. The various RJMs identified in this study could be utilized as a significant asset in Jatropha functional genomics including genome determination, mapping and marker-assisted selection.

Genetic diversity of Alternaria species associated with black point in wheat grains

The genus Alternaria is a widely distributed major plant pathogen that can act as a saprophyte in plant debris. Fungi of this genus frequently infect cereal crops and cause such diseases as black point and wheat leaf blight, which decrease the yield and quality of cereal products. A total of 25 Alternaria sp. isolates were collected from germ grains of various wheat cultivars from different geographic regions in Kazakhstan. We investigated the genetic relationships of the main Alternaria species related to black point disease of wheat in Kazakhstan, using the inter-primer binding site (iPBS) DNA profiling technique. We used 25 retrotransposon-based iPBS primers to identify the differences among and within Alternaria species populations, and analyzed the variation using clustering (UPGMA) and statistical approaches (AMOVA). Isolates of Alternaria species clustered into two main genetic groups, with species of A.alternata and A.tennuissima forming one cluster, and isolates of A. infectoria forming another. The genetic diversity found using retrotransposon profiles was strongly correlated with geographic data. Overall, the iPBS fingerprinting technique is highly informative and useful for the evaluation of genetic diversity and relationships of Alternaria species.

DNA markers based on retrotransposon insertion polymorphisms can detect short DNA fragments for strawberry cultivar identification

In this study, DNA markers were developed for discrimination of strawberry (Fragaria × ananassa L.) cultivars based on retrotransposon insertion polymorphisms. We performed a comprehensive genomic search to identify retrotransposon insertion sites and subsequently selected one retrotransposon family, designated CL3, which provided reliable discrimination among strawberry cultivars. Through analyses of 75 strawberry cultivars, we developed eight cultivar-specific markers based on CL3 retrotransposon insertion sites. Used in combination with 10 additional polymorphic markers, we differentiated 35 strawberry cultivars commonly cultivated in Japan. In addition, we demonstrated that the retrotransposon-based markers were effective for PCR detection of DNA extracted from processed food materials, whereas a SSR marker was ineffective. These results indicated that the retrotransposon-based markers are useful for cultivar discrimination for processed food products, such as jams, in which DNA may be fragmented or degraded.

High-throughput retrotransposon-based genetic diversity of maize germplasm assessment and analysis

Maize is one of the world's most important crops and a model for grass genome research. Long terminal repeat (LTR) retrotransposons comprise most of the maize genome; their ability to produce new copies makes them efficient high-throughput genetic markers. Inter-retrotransposon-amplified polymorphisms (IRAPs) were used to study the genetic diversity of maize germplasm. Five LTR retrotransposons (Huck, Tekay, Opie, Ji, and Grande) were chosen, based on their large number of copies in the maize genome, whereas polymerase chain reaction primers were designed based on consensus LTR sequences. The LTR primers showed high quality and reproducible DNA fingerprints, with a total of 677 bands including 392 polymorphic bands showing 58% polymorphism between maize hybrid lines. These markers were used to identify genetic similarities among all lines of maize. Analysis of genetic similarity was carried out based on polymorphic amplicon profiles and genetic similarity phylogeny analysis. This diversity was expected to display ecogeographical patterns of variation and local adaptation. The clustering method showed that the varieties were grouped into three clusters differing in ecogeographical origin. Each of these clusters comprised divergent hybrids with convergent characters. The clusters reflected the differences among maize hybrids and were in accordance with their pedigree. The IRAP technique is an efficient high-throughput genetic marker-generating method.

Developing Transposable Element Marker System for Molecular Breeding

Transposable element (TE) marker system was developed considering the useful properties of the transposable elements such as their large number in the animal and plant genomes, high rate of insertion polymorphism, and ease of detection. Various methods have been employed for developing a large number of TE markers in several crop plants for genomics studies. Here we describe some of these methods including the recent whole genome search. We also review the application of TE markers in molecular breeding.

Palindromic sequence-targeted (PST) PCR: a rapid and efficient method for high-throughput gene characterization and genome walking

Genome walking (GW) refers to the capture and sequencing of unknown regions in a long DNA molecule that are adjacent to a region with a known sequence. A novel PCR-based method, palindromic sequence-targeted PCR (PST-PCR), was developed. PST-PCR is based on a distinctive design of walking primers and special thermal cycling conditions. The walking primers (PST primers) match palindromic sequences (PST sites) that are randomly distributed in natural DNA. The PST primers have palindromic sequences at their 3′-ends. Upstream of the palindromes there is a degenerate sequence (8–12 nucleotides long); defined adapters are present at the 5′-termini. The thermal cycling profile has a linear amplification phase and an exponential amplification phase differing in annealing temperature. Changing the annealing temperature to switch the amplification phases at a defined cycle controls the balance between sensitivity and specificity. In contrast to traditional genome walking methods, PST-PCR is rapid (two to three hours to produce GW fragments) as it uses only one or two PCR rounds. Using PST-PCR, previously unknown regions (the promoter and intron 1) of the VRN1 gene of Timothy-grass (Phleum pratense L.) were captured for sequencing. In our experience, PST-PCR had higher throughput and greater convenience in comparison to other GW methods.

Production of a complete set of wheat-barley group-7 chromosome recombinants with increased grain β-glucan content

Wheat-barley group-7 recombinant chromosomes were selected using molecular cytogenetics and SNP markers; increased grain β-glucan content was observed in wheat plants with two and four copies of HvCslF6. The soluble dietary fiber (1-3)(1-4) mixed linked β-D-glucan from cereal grains is a valuable component of a healthy diet, which reduces risks of coronary disease and diabetes. Although wheat is an important cereal crop providing a substantial portion of daily calories and protein intake in the human diet, it has a low level of β-glucan. Owing to the plasticity of the polyploid wheat genome, agronomically important traits absent in the wheat primary gene pool can be introgressed from distant relatives. Barley (Hordeum vulgare L.) has a high grain β-glucan content. Earlier, we introgressed this trait into wheat in the form of whole arm compensating Robertsonian translocations (RobT) involving group-7 chromosomes of barley and all three sub-genomes of hexaploid wheat (Triticum aestivum L). In the presented research, we shortened the barley 7HL arms in these RobTs to small pericentromeric segments, using induced wheat-barley homoeologous recombination. The recombinants were selected using SNP markers and molecular cytogenetics. Plants, comprising barley cellulose synthase-like F6 gene (HvCslF6), responsible for β-glucan synthesis, had a higher grain β-glucan content than the wheat control. Three wheat-barley group-7 recombinant chromosomes involving the A, B and D sub-genomes laid the basis for a multiple-copy gene introgression to hexaploid wheat. It is hypothesized that further increases in the β-glucan content in wheat grain can be obtained by increasing the number of HvCslF6 copies through combining several recombinant chromosomes in one line. The wheat lines with four copies of HvCslF6 exceeded the β-glucan content of the lines with two copies.

Production of a complete set of wheat-barley group-7 chromosome recombinants with increased grain β-glucan content

Wheat-barley group-7 recombinant chromosomes were selected using molecular cytogenetics and SNP markers; increased grain β-glucan content was observed in wheat plants with two and four copies of HvCslF6. The soluble dietary fiber (1-3)(1-4) mixed linked β-D-glucan from cereal grains is a valuable component of a healthy diet, which reduces risks of coronary disease and diabetes. Although wheat is an important cereal crop providing a substantial portion of daily calories and protein intake in the human diet, it has a low level of β-glucan. Owing to the plasticity of the polyploid wheat genome, agronomically important traits absent in the wheat primary gene pool can be introgressed from distant relatives. Barley (Hordeum vulgare L.) has a high grain β-glucan content. Earlier, we introgressed this trait into wheat in the form of whole arm compensating Robertsonian translocations (RobT) involving group-7 chromosomes of barley and all three sub-genomes of hexaploid wheat (Triticum aestivum L). In the presented research, we shortened the barley 7HL arms in these RobTs to small pericentromeric segments, using induced wheat-barley homoeologous recombination. The recombinants were selected using SNP markers and molecular cytogenetics. Plants, comprising barley cellulose synthase-like F6 gene (HvCslF6), responsible for β-glucan synthesis, had a higher grain β-glucan content than the wheat control. Three wheat-barley group-7 recombinant chromosomes involving the A, B and D sub-genomes laid the basis for a multiple-copy gene introgression to hexaploid wheat. It is hypothesized that further increases in the β-glucan content in wheat grain can be obtained by increasing the number of HvCslF6 copies through combining several recombinant chromosomes in one line. The wheat lines with four copies of HvCslF6 exceeded the β-glucan content of the lines with two copies.

Agrobacterium-mediated Tnt1 mutagenesis of moss protonemal filaments and generation of stable mutants with impaired gametophyte

The gametophyte of moss exhibits a simple body plan, yet its growth is regulated by complex developmental phenomena similar to angiosperms. Because moss can be easily maintained under laboratory conditions, amenable for gene targeting and the availability of genome sequence, P. patens has become an attractive model system for studying evolutionary traits. Until date, there has been no Agrobacterium-mediated Tnt1 mutagenesis protocol for haploid protonemal filaments of moss. Hence, we attempted to use the intact tobacco Tnt1 retrotransposon as a mutagen for P. patens. Bioinformatic analysis of initiator methionyl-tRNA (Met-tRNAi), a critical host factor for Tnt1 transposition process, suggested that it can be explored as a mutagen for bryophytes. Using protonemal filaments and Agrobacterium-mediated transformation, 75 Tnt1 mutants have been generated and cryopreserved. SSAP analysis and TAIL-PCR revealed that Tnt1 is functional in P. patens and has a high-preference for gene and GC-rich regions. In addition, LTR::GUS lines exhibited a basal but tissue-specific inducible expression pattern. Forward genetic screen resulted in 5 novel phenotypes related to hormonal and gravity response, phyllid, and gamete development. SSAP analysis suggests that the Tnt1 insertion pattern is stable under normal growth conditions and the high-frequency phenotypic deviations are possibly due to the combination of haploid explant (protonema) and the choice of mutagen (Tnt1). We demonstrate that Agrobacterium-mediated Tnt1 insertional mutagenesis could generate stable P. patens mutant populations for future forward genetic studies.

Parental transposable element loads influence their dynamics in young Nicotiana hybrids and allotetraploids

The genomic shock hypothesis suggests that allopolyploidy is associated with genome changes driven by transposable elements, as a response to imbalances between parental insertion loads. To explore this hypothesis, we compared three allotetraploids, Nicotiana arentsii, N. rustica and N. tabacum, which arose over comparable time frames from hybridisation between increasingly divergent diploid species. We used sequence-specific amplification polymorphism (SSAP) to compare the dynamics of six transposable elements in these allopolyploids, their diploid progenitors and in corresponding synthetic hybrids. We show that element-specific dynamics in young Nicotiana allopolyploids reflect their dynamics in diploid progenitors. Transposable element mobilisation is not concomitant with immediate genome merger, but occurs within the first generations of allopolyploid formation. In natural allopolyploids, such mobilisations correlate with imbalances in the repeat profile of the parental species, which increases with their genetic divergence. Other restructuring leading to locus loss is immediate, nonrandom and targeted at specific subgenomes, independently of cross orientation. The correlation between transposable element mobilisation in allopolyploids and quantitative imbalances in parental transposable element loads supports the genome shock hypothesis proposed by McClintock.

Shaping Plant Adaptability, Genome Structure and Gene Expression through Transposable Element Epigenetic Control: Focus on Methylation

In plants, transposable elements (TEs) represent a large fraction of the genome, with potential to alter gene expression and produce genomic rearrangements. Epigenetic control of TEs is often used to stop unrestricted movement of TEs that would result in detrimental effects due to insertion in essential genes. The current review focuses on the effects of methylation on TEs and their genomic context, and how this type of epigenetic control affects plant adaptability when plants are faced with different stresses and changes. TEs mobilize in response to stress elicitors, including biotic and abiotic cues, but also developmental transitions and ‘genome shock’ events like polyploidization. These events transitionally lift TE repression, allowing TEs to move to new genomic locations. When TEs fall close to genes, silencing through methylation can spread to nearby genes, resulting in lower gene expression. The presence of TEs in gene promoter regions can also confer stress inducibility modulated through alternative methylation and demethylation of the TE. Bursts of transposition triggered by events of genomic shock can increase genome size and account for differences seen during polyploidization or species divergence. Finally, TEs have evolved several mechanisms to suppress their own repression, including the use of microRNAs to control genes that promote methylation. The interplay between silencing, transient TE activation, and purifying selection allows the genome to use TEs as a reservoir of potential beneficial modifications but also keeps TEs under control to stop uncontrolled detrimental transposition.

Molecular insights into genetic diversity and population dynamics of five medicinal Eulophia species: a threatened orchid taxa of Africa

Genetic diversity existing amongst five Eulophia orchid species were assessed using start codon targeted polymorphism (SCoT) and inter-retrotransposon amplified polymorphism (IRAP) markers. A total of 12 SCoT and 5 IRAP markers revealed an average of 63% genetic variability [SCoT = 63.87; IRAP = 64.95%] amongst the five Eulophia species investigated. The genetic similarities were assessed using both UPGMA and Bayesian approaches which indicated identical clustering patterns at a genetic similarity level of 50%. Analysis of molecular variance (AMOVA) revealed the presence of a significant degree of genetic variability, mostly compartmentalized within the species level. Amongst the five assessed Eulophia species, E. parviflora was the most genetically diverse representative whereas E. welwitschii was found to be least diverse based on a comparative assessment of various population genetic parameters like Nei's gene diversity (h) and Shannon's information index (I) with an overall gene flow value greater than 1. In order to evaluate the comparative marker efficiency, SCoT and IRAP marker data were subjected to various benchmark analyses like marker index, resolving power, polymorphic index content, multiplex ratio and effective multiplex ratio which revealed the robustness of both the marker techniques in assessment of genetic diversity. The present report provides the first molecular insights into the aspects of inter and intra specific genetic variability in medicinally as well as horticulturally important Eulophia species along with addressing their conservation concerns. In a nutshell, the present approach is simple, rapid and cost effective and can be extended for analysis of genetic diversity of other related plant species.

Development of a complete set of wheat-barley group-7 Robertsonian translocation chromosomes conferring an increased content of β-glucan

A complete set of six compensating Robertsonian translocation chromosomes involving barley chromosome 7H and three chromosomes of hexaploid wheat was produced. Grain β-glucan content increased in lines containing 7HL. Many valuable genes for agronomic performance, disease resistance and increased yield have been transferred from relative species to wheat (Triticum aestivum L.) through whole-arm Robertsonian translocations (RobT). Although of a great value, the sets of available translocations from barley (Hordeum vulgare L.) are limited. Here, we present the production of a complete set of six compensating RobT chromosomes involving barley chromosome 7H and three group-7 chromosomes of wheat. The barley group-7 long-arm RobTs had a higher grain β-glucan content compared to the wheat control. The β-glucan levels varied depending on the temperature and were higher under hot conditions. Implicated in this increase, the barley cellulose synthase-like F6 gene (CslF6) responsible for β-glucan synthesis was physically mapped near the centromere in the long arm of barley chromosome 7H. Likewise, wheat CslF6 homoeologs were mapped near the centromere in the long arms of all group-7 wheat chromosomes. With the set of novel wheat-barley translocations, we demonstrate a valuable increase of β-glucan, along with a resource of genetic stocks that are likely to carry many other important genes from barley into wheat.

Molecular characterization of Fagaceae species using inter-primer binding site (iPBS) markers

Retrotransposons (RTNs) contribute for genome evolution, influencing its size and structure. We investigated the utility of the RTN-based markers inter-primer binding site (iPBS) for the molecular characterization of 25 Fagaceae species from genera Castanea, Fagus and Quercus. The assessment of genetic diversity, relationships and structure, as well as taxonomic classification of Fagaceae based on molecular data is important for definition of conservation, forestry management strategies and discrimination among natural hybrids and their parents since natural hybridization may increase with the climate changes. Here, iPBS primers designed by other authors were tested alone and combined. Some of them were discriminative, revealed polymorphism within and among taxa allowing the production of a total of 150 iPBS markers. In addition, several monomorphic iPBS markers were also amplified in each taxon. The UPGMA dendrogram based on the pooled iPBS data revealed 27% of genetic similarity among species. The individuals were clustered per genus and most of the oaks per infrageneric group corroborating the adopted taxonomy. Globally, the iPBS markers demonstrated suitability for DNA fingerprinting, determination of phylogenies and taxonomic discrimination in Fagaceae, and could constitute a useful and alternative tool for germplasm characterization, and for definition of conservation strategies and forestry management. Moreover, these markers would be useful for fingerprinting natural hybrids that share morphological similarities with their parents. Since iPBS markers could also enable insights about RTNs evolution, an eventual correlation among iPBS polymorphism, variability of RTN insertions and/or genome size in Fagaceae is discussed.

Use of retrotransposon-derived genetic markers to analyse genomic variability in plants

Transposable elements (TEs) are common mobile genetic elements comprising several classes and making up the majority of eukaryotic genomes. The movement and accumulation of TEs has been a major force shaping the genes and genomes of most organisms. Most eukaryotic genomes are dominated by retrotransposons and minimal DNA transposon accumulation. The 'copy and paste' lifecycle of replicative transposition produces new genome insertions without excising the original element. Horizontal TE transfer among lineages is rare. TEs represent a reservoir of potential genomic instability and RNA-level toxicity. Many TEs appear static and nonfunctional, but some are capable of replicating and mobilising to new positions, and somatic transposition events have been observed. The overall structure of retrotransposons and the domains responsible for the phases of their replication are highly conserved in all eukaryotes. TEs are important drivers of species diversity and exhibit great variety in their structure, size and transposition mechanisms, making them important putative actors in evolution. Because TEs are abundant in plant genomes, various applications have been developed to exploit polymorphisms in TE insertion patterns, including conventional or anchored PCR, and quantitative or digital PCR with primers for the 5' or 3' junction. Alternatively, the retrotransposon junction can be mapped using high-throughput next-generation sequencing and bioinformatics. With these applications, TE insertions can be rapidly, easily and accurately identified, or new TE insertions can be found. This review provides an overview of the TE-based applications developed for plant species and assesses the contributions of TEs to the analysis of plants' genetic diversity.

Analysis of genetic diversity in pigeon pea germplasm using retrotransposon-based molecular markers

Pigeon pea (Cajanus cajan), an important legume crop is predominantly cultivated in tropical and subtropical regions of Asia and Africa. It is normally considered to have a low degree of genetic diversity, an impediment in undertaking crop improvement programmes.We have analysed genetic polymorphism of domesticated pigeon pea germplasm (47 accessions) across the world using earlier characterized panzee retrotransposon-based molecularmarkers. Itwas conjectured that since retrotransposons are interspersed throughout the genome, retroelements-based markers would be able to uncover polymorphism possibly inherent in the diversity of retroelement sequences. Two PCR-based techniques, sequence-specific amplified polymorphism (SSAP) and retrotransposon microsatellite amplified polymorphism (REMAP) were utilized for the analyses.We show that a considerable degree of polymorphism could be detected using these techniques. Three primer combinations in SSAP generated 297 amplified products across 47 accessions with an average of 99 amplicons per assay. Degree of polymorphism varied from 84-95%. In the REMAP assays, the number of amplicons was much less but up to 73% polymorphism could be detected. On the basis of similarity coefficients, dendrograms were constructed. The results demonstrate that the retrotransposon-based markers could serve as a better alternative for the assessment of genetic diversity in crops with apparent low genetic base.

Comparison of traditional and new generation DNA markers declares high genetic diversity and differentiated population structure of wild almond species

Wild almond species as sources of genetic variation may have crucial importance in breeding. A total of 389 accessions of 18 species have been analysed using inter-retrotransposon amplified polymorphism (IRAP), retrotransposon-microsatellite amplified polymorphism (REMAP), sequence-specific amplification polymorphism (S-SAP), amplified fragment length polymorphism (AFLP), inter simple sequence repeat (ISSR) and simple sequence repeats (SSR). Retrotransposon markers indicated the presence and movement of some Ty3-gypsy and Ty1-copia-elements in almond genome. Since transposable elements are associated with large-scale genome alterations, REMAP produced more reliable phylogenetic inferences than AFLP where homoplasy may affect clustering. In addition, high resolution melting (HRM) analysis was developed to detect SNPs. HRM analysis revealed 1:189 bp frequency of SNPs in exon positions, and the transition-to-transversion proportion was 1.84:1. The low transition bias suggests low methylation levels in almond genome. The polymorphic information content (PIC) was the highest for SSR markers, while SNPs had an average PIC of 0.59, which is close to the values of the rest of the markers. Huge genetic diversity, fragmented population structure and footprints of human selection was confirmed by merging information from all marker strategies. Considering time, cost and performance HRM can be a marker of choice in future studies of Prunus diversity.

Obtaining retrotransposon sequences, analysis of their genomic distribution and use of retrotransposon-derived genetic markers in lentil (Lens culinaris Medik.)

Retrotransposons with long terminal repeats (LTR-RTs) are widespread mobile elements in eukaryotic genomes. We obtained a total of 81 partial LTR-RT sequences from lentil corresponding to internal retrotransposon components and LTRs. Sequences were obtained by PCR from genomic DNA. Approximately 37% of the LTR-RT internal sequences presented premature stop codons, pointing out that these elements must be non-autonomous. LTR sequences were obtained using the iPBS technique which amplifies sequences between LTR-RTs. A total of 193 retrotransposon-derived genetic markers, mainly iPBS, were used to obtain a genetic linkage map from 94 F₇ inbred recombinant lines derived from the cross between the cultivar Lupa and the wild ancestor L. culinaris subsp. orientalis. The genetic map included 136 markers located in eight linkage groups. Clusters of tightly linked retrotransposon-derived markers were detected in linkage groups LG1, LG2, and LG6, hence denoting a non-random genomic distribution. Phylogenetic analyses identified the LTR-RT families in which internal and LTR sequences are included. Ty3-gypsy elements were more frequent than Ty1-copia, mainly due to the high Ogre element frequency in lentil, as also occurs in other species of the tribe Vicieae. LTR and internal sequences were used to analyze in silico their distribution among the contigs of the lentil draft genome. Up to 8.8% of the lentil contigs evidenced the presence of at least one LTR-RT similar sequence. A statistical analysis suggested a non-random distribution of these elements within of the lentil genome. In most cases (between 97% and 72%, depending on the LTR-RT type) none of the internal sequences flanked by the LTR sequence pair was detected, suggesting that defective and non-autonomous LTR-RTs are very frequent in lentil. Results support that LTR-RTs are abundant and widespread throughout of the lentil genome and that they are a suitable source of genetic markers useful to carry out further genetic analyses.

Useful parasites: the evolutionary biology and biotechnology applications of transposable elements

Transposable elements usually comprise the most abundant nongenic fraction of eukaryotic genomes. Because of their capacity to selfreplicate and to induce a wide range of mutations, transposable elements have long been considered as 'parasitic' or 'selfish'. Today, we recognize that the findings about genomic changes affected by transposable elements have considerably altered our view of the ways in which genomes evolve and work. Numerous studies have provided evidences that mobile elements have the potential to act as agents of evolution by increasing, rearranging and diversifying the genetic repertoire of their hosts. With large-scale sequencing becoming increasingly available, more and more scientists come across transposable element sequences in their data. I will provide examples that transposable elements, although having signatures of 'selfish' DNA, play a significant biological role in the maintainance of genome integrity and providing novel regulatoty networks. These features, along with the transpositional and mutagenic capacity to produce a raw genetic diversity, make the genome mobile fraction, a key player in species adaptation and microevolution. The last but not least, transposable elements stand as informative DNA markers that may complement other conventional DNA markers. Altogether, transposable elements represent a promising, but still largely unexplored research niche and deserve to be included into the agenda of molecular ecologists, evolutionary geneticists, conservation biologists and plant breeders.

Patterns of Evolutionary Trajectories and Domestication History within the Genus Hordeum Assessed by REMAP Markers

The patterns of genetic diversity related to the taxonomy and domestication history of 85 accessions representing the main four species of the genus Hordeum were examined by retrotransposon-microsatellite amplified polymorphism (REMAP) markers based on the retrotransposon BARE-1. A substantial level of genetic polymorphisms at among- and within-species level was observed showing that this retrotransposon family and its adjacent genomic regions has been a target for genome dynamics during the evolution and domestication of barley. The obtained data are consistent with the current taxonomic status within the genus Hordeum. Similar level of genetic diversity was observed between the wild and the domesticated barley accessions suggesting that transposable elements` activity and accumulation may counteract the decrease of genome-wide diversity following domestication. In addition, eco-geographical sub-genome pools of the cultivated barley were identified in support to the theory of multiple origins of domestication within the genus Hordeum. We also provide conclusions about the relationship between accessions of different species and the putative routes of barley domestication. In conclusion, the retrotransposon BARE-1 stands as a reliable and perspective DNA marker for the assessment of the phylogenetic and domestication history in the genus Hordeum and other crop species.

Ty1-copia elements reveal diverse insertion sites linked to polymorphisms among flax (Linum usitatissimum L.) accessions

BACKGROUND

Initial characterization of the flax genome showed that Ty1-copia retrotransposons are abundant, with several members being recently inserted, and in close association with genes. Recent insertions indicate a potential for ongoing transpositional activity that can create genomic diversity among accessions, cultivars or varieties. The polymorphisms generated constitute a good source of molecular markers that may be associated with phenotype if the insertions alter gene activity. Flax, where accessions are bred mainly for seed nutritional properties or for fibers, constitutes a good model for studying the relationship of transpositional activity with diversification and breeding. In this study, we estimated copy number and used a type of transposon display known as Sequence-Specific Amplification Polymorphisms (SSAPs), to characterize six families of Ty1-copia elements across 14 flax accessions. Polymorphic insertion sites were sequenced to find insertions that could potentially alter gene expression, and a preliminary test was performed with selected genes bearing transposable element (TE) insertions.

RESULTS

Quantification of six families of Ty1-copia elements indicated different abundances among TE families and between flax accessions, which suggested diverse transpositional histories. SSAPs showed a high level of polymorphism in most of the evaluated retrotransposon families, with a trend towards higher levels of polymorphism in low-copy number families. Ty1-copia insertion polymorphisms among cultivars allowed a general distinction between oil and fiber types, and between spring and winter types, demonstrating their utility in diversity studies. Characterization of polymorphic insertions revealed an overwhelming association with genes, with insertions disrupting exons, introns or within 1 kb of coding regions. A preliminary test on the potential transcriptional disruption by TEs of four selected genes evaluated in three different tissues, showed one case of significant impact of the insertion on gene expression.

CONCLUSIONS

We demonstrated that specific Ty1-copia families have been active since breeding commenced in flax. The retrotransposon-derived polymorphism can be used to separate flax types, and the close association of many insertions with genes defines a good source of potential mutations that could be associated with phenotypic changes, resulting in diversification processes.

Genetic and Epigenetic Changes in Oilseed Rape (Brassica napus L.) Extracted from Intergeneric Allopolyploid and Additions with Orychophragmus

Allopolyploidization with the merger of the genomes from different species has been shown to be associated with genetic and epigenetic changes. But the maintenance of such alterations related to one parental species after the genome is extracted from the allopolyploid remains to be detected. In this study, the genome of Brassica napus L. (2n = 38, genomes AACC) was extracted from its intergeneric allohexaploid (2n = 62, genomes AACCOO) with another crucifer Orychophragmus violaceus (2n = 24, genome OO), by backcrossing and development of alien addition lines. B. napus-type plants identified in the self-pollinated progenies of nine monosomic additions were analyzed by the methods of amplified fragment length polymorphism, sequence-specific amplified polymorphism, and methylation-sensitive amplified polymorphism. They showed modifications to certain extents in genomic components (loss and gain of DNA segments and transposons, introgression of alien DNA segments) and DNA methylation, compared with B. napus donor. The significant differences in the changes between the B. napus types extracted from these additions likely resulted from the different effects of individual alien chromosomes. Particularly, the additions which harbored the O. violaceus chromosome carrying dominant rRNA genes over those of B. napus tended to result in the development of plants which showed fewer changes, suggesting a role of the expression levels of alien rRNA genes in genomic stability. These results provided new cues for the genetic alterations in one parental genome that are maintained even after the genome becomes independent.

Potential Start Codon Targeted (SCoT) and Inter-retrotransposon Amplified Polymorphism (IRAP) Markers for Evaluation of Genetic Diversity and Conservation of Wild Pistacia Species Population

Wild pistachio species is important species in forests regions Iran and provide protection wind and soil erosion. Even though cultivation and utilization of Pistacia are fully exploited, the evolutionary history of the Pistacia genus and the relationships among the species and accessions is still not well understood. Two molecular marker strategies, SCoT and IRAP markers were analyzed for assessment of 50 accessions of this species accumulated from diverse geographical areas of Iran. A thorough of 115 bands were amplified using eight IRAP primers, of which 104 (90.4 %) have been polymorphic, and 246 polymorphic bands (68.7 %) had been located in 358 bands amplified by way of forty-four SCoT primers. Average PIC for IRAP and SCoT markers became 0.32 and 0.48, respectively. This is exposed that SCoT markers have been extra informative than IRAP for the assessment of variety among pistachio accessions. Primarily based on the two extraordinary molecular markers, cluster evaluation revealed that the 50 accessions taken for the evaluation may be divided into three distinct clusters. Those results recommend that the performance of SCoT and IRAP markers was highly the equal in fingerprinting of accessions. The results affirmed a low genetic differentiation among populations, indicating the opportunity of gene drift most of the studied populations. These findings might render striking information in breeding management strategies for genetic conservation and cultivar improvement.

Primitive Genepools of Asian Pears and Their Complex Hybrid Origins Inferred from Fluorescent Sequence-Specific Amplification Polymorphism (SSAP) Markers Based on LTR Retrotransposons

Recent evidence indicated that interspecific hybridization was the major mode of evolution in Pyrus. The genetic relationships and origins of the Asian pear are still unclear because of frequent hybrid events, fast radial evolution, and lack of informative data. Here, we developed fluorescent sequence-specific amplification polymorphism (SSAP) markers with lots of informative sites and high polymorphism to analyze the population structure among 93 pear accessions, including nearly all species native to Asia. Results of a population structure analysis indicated that nearly all Asian pear species experienced hybridization, and originated from five primitive genepools. Four genepools corresponded to four primary Asian species: P. betulaefolia, P. pashia, P. pyrifolia, and P. ussuriensis. However, cultivars of P. ussuriensis were not monophyletic and introgression occurred from P. pyrifolia. The specific genepool detected in putative hybrids between occidental and oriental pears might be from occidental pears. The remaining species, including P. calleryana, P. xerophila, P. sinkiangensis, P. phaeocarpa, P. hondoensis, and P. hopeiensis in Asia, were inferred to be of hybrid origins and their possible genepools were identified. This study will be of great help for understanding the origin and evolution of Asian pears.

Co-evolution in a landrace meta-population: two closely related pathogens interacting with the same host can lead to different adaptive outcomes

We examined the local adaptation patterns in a system comprising several interconnected heterogeneous plant populations from which populations of two phylogenetically closely related pathogens were also sampled. The host is Hordeum vulgare (cultivated barley); the pathogens are Pyrenophora teres f. teres (net form) and Pyrenophora teres f. maculata (spot form), the causal agents of barley net blotch. We integrated two approaches, the comparison between the population structures of the host and the pathogens, and a cross-inoculation test. We demonstrated that two closely related pathogens with very similar niche specialisation and life-styles can give rise to different co-evolutionary outcomes on the same host. Indeed, we detected local adaptation for the net form of the pathogen but not for the spot form. We also provided evidence that an a-priori well-known resistance quantitative-trait-locus on barley chromosome 6H is involved in the co-evolutionary ‘arms race’ between the plant and the net-form pathogen. Moreover, data suggested latitudinal clines of host resistance and that different ecological conditions can result in differential selective pressures at different sites. Our data are of interest for on-farm conservation of plant genetic resources, as also in establishing efficient breeding programs and strategies for deployment of resistance genes of P. teres.

Characterization of repetitive DNA landscape in wheat homeologous group 4 chromosomes

Background

The number and complexity of repetitive elements varies between species, being in general most represented in those with larger genomes. Combining the flow-sorted chromosome arms approach to genome analysis with second generation DNA sequencing technologies provides a unique opportunity to study the repetitive portion of each chromosome, enabling comparisons among them. Additionally, different sequencing approaches may produce different depth of insight to repeatome content and structure. In this work we analyze and characterize the repetitive sequences of Triticum aestivum cv. Chinese Spring homeologous group 4 chromosome arms, obtained through Roche 454 and Illumina sequencing technologies, hereinafter marked by subscripts 454 and I, respectively.

Repetitive sequences were identified with the RepeatMasker software using the interspersed repeat database mips-REdat_v9.0p. The input sequences consisted of our 4DS₄₅₄ and 4DL₄₅₄ scaffolds and 4AS_I, 4AL_I, 4BS_I, 4BL_I, 4DS_I and 4DL_I contigs, downloaded from the International Wheat Genome Sequencing Consortium (IWGSC).

Results

Repetitive sequences content varied from 55% to 63% for all chromosome arm assemblies except for 4DL_I, in which the repeat content was 38%. Transposable elements, small RNA, satellites, simple repeats and low complexity sequences were analyzed. SSR frequency was found one per 24 to 27 kb for all chromosome assemblies except 4DL_I, where it was three times higher. Dinucleotides and trinucleotides were the most abundant SSR repeat units. (GA)n/(TC)n was the most abundant SSR except for 4DL_I where the most frequently identified SSR was (CCG/CGG)n. Retrotransposons followed by DNA transposons were the most highly represented sequence repeats, mainly composed of CACTA/En-Spm and Gypsy superfamilies, respectively. This whole chromosome sequence analysis allowed identification of three new LTR retrotransposon families belonging to the Copia superfamily, one belonging to the Gypsy superfamily and two TRIM retrotransposon families. Their physical distribution in wheat genome was analyzed by fluorescent in situ hybridization (FISH) and one of them, the Carmen retrotransposon, was found specific for centromeric regions of all wheat chromosomes.

Conclusion

The presented work is the first deep report of wheat repetitive sequences analyzed at the chromosome arm level, revealing the first insight into the repeatome of T. aestivum chromosomes of homeologous group 4.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1579-0) contains supplementary material, which is available to authorized users.

Construction of a linkage map based on retrotransposon insertion polymorphisms in sweetpotato via high-throughput sequencing

Sweetpotato (Ipomoea batatas L.) is an outcrossing hexaploid species with a large number of chromosomes (2n = 6x = 90). Although sweetpotato is one of the world's most important crops, genetic analysis of the species has been hindered by its genetic complexity combined with the lack of a whole genome sequence. In the present study, we constructed a genetic linkage map based on retrotransposon insertion polymorphisms using a mapping population derived from a cross between 'Purple Sweet Lord' (PSL) and '90IDN-47' cultivars. High-throughput sequencing and subsequent data analyses identified many Rtsp-1 retrotransposon insertion sites, and their allele dosages (simplex, duplex, triplex, or double-simplex) were determined based on segregation ratios in the mapping population. Using a pseudo-testcross strategy, 43 and 47 linkage groups were generated for PSL and 90IDN-47, respectively. Interestingly, most of these insertions (~90%) were present in a simplex manner, indicating their utility for linkage map construction in polyploid species. Additionally, our approach led to savings of time and labor for genotyping. Although the number of markers herein was insufficient for map-based cloning, our trial analysis exhibited the utility of retrotransposon-based markers for linkage map construction in sweetpotato.