Turbulence accelerates the growth of drinking water biofilms

Microfluidic Platform with Precisely Controlled Hydrodynamic Parameters and Integrated Features for Generation of Microvortices to Accurately Form and Monitor Biofilms in Flow

Microorganisms often live in habitats characterized by fluid flow, and their adhesion to surfaces in industrial systems or clinical settings may lead to pipe clogging, microbially influenced corrosion, material deterioration, food spoilage, infections, and human illness. Here, a novel microfluidic platform was developed to investigate biofilm formation under precisely controlled (i) cell concentration, (ii) temperature, and (iii) flow conditions. The developed platform central unit is a single-channel microfluidic flow cell designed to ensure ultrahomogeneous flow and condition in its central area, where features, e.g., with trapping properties, can be incorporated. In comparison to static and macroflow chamber assays for biofilm studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes and have better environment control and smaller sample requirements. Flow simulations and experiments with fluorescent particles were used to simulate bacteria flow in the platform cell for calculating flow velocity and direction at the microscale level. The combination of flow analysis and fluorescent strain injection in the cell showed that microtraps placed at the center of the channel were efficient in capturing bacteria at determined positions and to study how flow conditions, especially microvortices, can affect biofilm formation. The microfluidic platform exhibited improved performances in terms of homogeneity and robustness for in vitro biofilm formation. We anticipate the presented platform to be suitable for broad, versatile, and high-throughput biofilm studies at the microscale level.

Multispecies Bacterial Biofilms and Their Evaluation Using Bioreactors

Pathogenic biofilm formation within food processing industries raises a serious public health and safety concern, and places burdens on the economy. Biofilm formation on equipment surfaces is a rather complex phenomenon, wherein multiple steps are involved in bacterial biofilm formation. In this review we discuss the stages of biofilm formation, the existing literature on the impact of surface properties and shear stress on biofilms, types of bioreactors, and antimicrobial coatings. The review underscores the significance of prioritizing biofilm prevention strategies as a first line of defense, followed by control measures. Utilizing specific biofilm eradication strategies as opposed to a uniform approach is crucial because biofilms exhibit different behavioral outcomes even amongst the same species when the environmental conditions change. This review is geared towards biofilm researchers and food safety experts, and seeks to derive insights into the scope of biofilm formation, prevention, and control. The use of suitable bioreactors is paramount to understanding the mechanisms of biofilm formation. The findings provide useful information to researchers involved in bioreactor selection for biofilm investigation, and food processors in surfaces with novel antimicrobial coatings, which provide minimal bacterial attachment.

The Role of Chlorine in the Formation and Development of Tap Water Biofilms under Different Flow Regimes

Water companies make efforts to reduce the risk of microbial contamination in drinking water. A widely used strategy is to introduce chlorine into the drinking water distribution system (DWDS). A subtle potential risk is that non-lethal chlorine residuals may select for chlorine resistant species in the biofilms that reside in DWDS. Here, we quantify the thickness, density, and coverage of naturally occurring multi-species biofilms grown on slides in tap water with and without chlorine, using fluorescence microscopy. We then place the slides in an annular rotating reactor and expose them to fluid-wall shears, which are redolent of those on pipe walls in DWDS. We found that biofilms in chlorine experiment were thicker, denser and with higher coverage than in non-chlorine conditions under all flow regimes and during incubation. This suggests that the formation and development of biofilms was promoted by chlorine. Surprisingly, for both chlorinated and non-chlorinated conditions, biofilm thickness, density and coverage were all positively correlated with shear stress. More differences were detected in biofilms under the different flow regimes in non-chlorine than in chlorine experiments. This suggests a more robust biofilm under chlorine conditions. While this might imply less mobilization of biofilms in high shear events in pipe networks, it might also provide refuge from chlorine residuals for pathogens.

Assessing the health risks associated with the usage of water-atomization shower systems in buildings

In the context of climate change policies, buildings must implement solutions to reduce energy and water consumption. One such solution is showering with water atomization showerheads, which can significantly reduce water and energy usage. However, the lack of risk assessment for users' health has hindered the widespread adoption of this technology. To address this gap, we assess the risk of spreading bacteria, in particular the pathogenic bacterium Legionella pneumophila, from shower hose biofilms of different ages grown under controlled or uncontrolled conditions considering different levels of water hardness, during showering using water atomization showerheads (ECO) or continuous flow showerheads (STA). We compared the aerosol and bioaerosol emission - total, viable and cultivable - during a 10 min shower event between the two shower systems. We showed that the water-atomization showerhead emitted slightly more nanoparticles smaller than 0.45 µm and slightly fewer particles larger than 0.5 µm than the continuous flow showerhead. Additionally, ECO showerheads emitted fewer cultivable bacteria than STA, regardless of the biofilm's age or growth conditions. When Legionella pneumophila was detected in biofilms, ECO showerheads released slightly less cultivable Legionella in the first flush of shower water compared to the STA, ranging from 6.0 × 102 to 1.6 × 104 CFU·L-1. However, cultivable L. pneumophila was not detected in the aerosols emitted during showering with either showerhead. These findings suggest that emerging water-drop emission technologies might affect human exposure to aerosols differently than traditional systems, emphasizing the importance of assessing the health risks associated with any new shower system. Additionally, these findings provide valuable insights for achieving a balance between water and energy conservation.

Separate effect of turbulent pulsation on internal mass transfer in porous biofilms

Turbulence is considered to be the result of coupled time-averaged and pulsating velocities, making it difficult to distinguish the respective effects, and the quantitative effect of turbulent pulsation alone on mass transfer within biofilms has not been discussed in the literature. In this study, we constructed a special oscillating grid biofilm reactor combining Particle Image Velocimetry (PIV) measurements and Computational Fluid Dynamics (CFD) simulations to achieve nearly isotropic turbulence in a designed ambient without time-averaged velocity and shear stress. Subsequently, velocity and contaminant concentration distributions were obtained by solving a mass transfer model with a k-ε turbulence model, combined with measurements of biofilm structure parameters. The results showed that the increase in turbulent pulsation intensity led to a significant stratification of the percolation velocity gradient in biofilms, which enhanced convective mass transfer. The changes of biofilm density and porosity under turbulent pulsation were more strongly correlated with convective mass transfer. When the turbulent intensity (q) increased to 2.50 cm s^-1, the removal rate reached the highest value of 96.93%, accelerating the migration of contaminant concentration and the diffusive mass transfer effect was obvious. In addition, the trend of biofilm thickness under turbulent pulsation was consistent with the change of contaminant concentration distribution, and the correlation between them was greater. In summary, at q of 2.50 cm s^-1, there was a positive effect on both convection and diffusion mechanisms in biofilms, and the contaminant removal rate and biofilm thickness reached the maximum, which was the recommended turbulent pulsation conditions.

Early biofilm and streamer formation is mediated by wall shear stress and surface wettability: A multifactorial microfluidic study

Biofilms are intricate communities of microorganisms encapsulated within a self‐produced matrix of extra‐polymeric substances (EPS), creating complex three‐dimensional structures allowing for liquid and nutrient transport through them. These aggregations offer constituent microorganisms enhanced protection from environmental stimuli—like fluid flow—and are also associated with higher resistance to antimicrobial compounds, providing a persistent cause of concern in numerous sectors like the marine (biofouling and aquaculture), medical (infections and antimicrobial resistance), dentistry (plaque on teeth), food safety, as well as causing energy loss and corrosion. Recent studies have demonstrated that biofilms interact with microplastics, often influencing their pathway to higher trophic levels. Previous research has shown that initial bacterial attachment is affected by surface properties. Using a microfluidic flow cell, we have investigated the relationship between both wall shear stress (τ_w) and surface properties (surface wettability) upon biofilm formation of two species (Cobetia marina and Pseudomonas aeruginosa). We investigated biofilm development on low‐density polyethylene (LDPE) membranes, Permanox® slides, and glass slides, using nucleic acid staining and end‐point confocal laser scanning microscopy. The results show that flow conditions affect biomass, maximum thickness, and surface area of biofilms, with higher τ_w (5.6 Pa) resulting in thinner biofilms than lower τ_w (0.2 Pa). In addition, we observed differences in biofilm development across the surfaces tested, with LDPE typically demonstrating more overall biofilm in comparison to Permanox® and glass. Moreover, we demonstrate the formation of biofilm streamers under laminar flow conditions within straight micro‐channels.

Water and biofilm in drinking water distribution systems in the Netherlands

To keep the high quality of drinking water in the future for non-chlorinated drinking water systems, knowledge about the variables that most strongly affect this quality is necessary in order to know where to focus on and possibly even change aspects of drinking water production and distribution. Therefore, the aim of this study was to investigate which variables (source of drinking water, growth potential and pipe material type) have the biggest influence on bacterial community composition and biomass concentration of drinking water and biofilm in distribution systems. Ten different distribution systems were sampled for water and biofilm, obtained from four different pipe materials, throughout the Netherlands. The distribution systems are supplied either with drinking water produced from groundwater or surface water, and differ in drinking water quality parameters such as the growth potential. We found a significant relationship for growth potential and ATP concentration in water, but for the ATP in the biofilm none of the parameters showed a significant effect. Furthermore, the source of the drinking water and the pipe material did not significantly affect the ATP concentration in water and biofilm. The bacterial composition of in both water and biofilm was significantly different between distribution systems delivering water with low and high growth potential and between drinking water produced from groundwater or surface water. In contrast, the different pipe materials did not significantly affect composition of biofilm-associated communities. We conclude from these results that the growth potential of the treated water best explains the variation in biomass and bacterial composition in water and biofilm of non-chlorinated drinking water distribution systems followed by the drinking water source, whereas pipe materials seem to be of lesser importance.

The role of shear dynamics in biofilm formation

There is growing evidence that individual bacteria sense and respond to changes in mechanical loading. However, the subtle responses of multispecies biofilms to dynamic fluid shear stress are not well documented because experiments often fail to disentangle any beneficial effects of shear stress from those delivered by convective transport of vital nutrients. We observed the development of biofilms with lognormally distributed microcolony sizes in drinking water on the walls of flow channels underflow regimes of increasing complexity. First, where regular vortices induced oscillating wall shear and simultaneously enhanced mass transport, which produced the thickest most extensive biofilms. Second, where unsteady uniform flow imposed an oscillating wall shear, with no enhanced transport, and where the biomass and coverage were only 20% smaller. Finally, for uniform steady flows with constant wall shear where the extent, thickness, and density of the biofilms were on average 60% smaller. Thus, the dynamics of shear stress played a significant role in promoting biofilm development, over and above its magnitude or mass transfer effects, and therefore, mechanosensing may prevail in complex multispecies biofilms which could open up new ways of controlling biofilm structure.

Wetting properties of dehydrated biofilms under different growth conditions

Biofilms are resilient to environmental conditions and often resistant even to strong disinfectants. It is crucial to investigate their interfacial properties, which can be effectively characterized by wetting analysis. Wetting phenomena on biofilm surfaces have been poorly investigated in literature, in particular a systematic study of wetting on real biofilm-coated substrates including the application of external body forces (forced wetting, i.e.: centrifugal and gravitational forces) is missing. The aim of this work is to study the role of nutrient and shear flow conditions on wetting properties of Pseudomonas fluorescens dehydrated biofilms, grown on glass substrates. An innovative device (Kerberos®), capable to study spreading/sliding behavior under the application of external body forces, is used here for a systematic analysis of wetting/de-wetting liquid droplets on horizontal substrates under the action of tangential forces. Results prove that, under different growth conditions, (i.e., nutrients and imposed flow), biofilms exhibit different wetting properties. At lower nutrient/shear flow conditions, biofilms show spreading/sliding behavior close to that of pure glass. At higher nutrient and shear flow conditions, droplets on biofilms show spreading followed by imbibition soon after deposition, which leads to peculiar droplet depinning during the rotation test. Wetting properties are derived as a function of the rotation speed from both top and side views videoframes through a dedicated image analysis technique. A detailed analysis of biofilm formation and morphology/topography is also provided here.

The role of antibiotics and heavy metals on the development, promotion, and dissemination of antimicrobial resistance in drinking water biofilms

Antimicrobial resistance (AMR), as well as the development of biofilms in drinking water distribution systems (DWDSs), have become an increasing concern for public health and management. As bulk water travels from source to tap, it may accumulate contaminants of emerging concern (CECs) such as antibiotics and heavy metals. When these CECs and other selective pressures, such as disinfection, pipe material, temperature, pH, and nutrient availability interact with planktonic cells and, consequently, DWDS biofilms, AMR is promoted. The purpose of this review is to highlight the mechanisms by which AMR develops and is disseminated within DWDS biofilms. First, this review will lay a foundation by describing how DWDS biofilms form, as well as their basic intrinsic and acquired resistance mechanisms. Next, the selective pressures that further induce AMR in DWDS biofilms will be elaborated. Then, the pressures by which antibiotic and heavy metal CECs accumulate in DWDS biofilms, their individual resistance mechanisms, and co-selection are described and discussed. Finally, the known human health risks and current management strategies to mitigate AMR in DWDSs will be presented. Overall, this review provides critical connections between several biotic and abiotic factors that influence and induce AMR in DWDS biofilms. Implications are made regarding the importance of monitoring and managing the development, promotion, and dissemination of AMR in DWDS biofilms.

Wetting of Dehydrated Hydrophilic Pseudomonas fluorescens Biofilms under the Action of External Body Forces

Wetting of dehydrated Pseudomonas fluorescens biofilms grown on glass substrates by an external liquid is employed as a means to investigate the complex morphology of these biofilms along with their capability to interact with external fluids. The porous structure left behind after dehydration induces interesting droplet spreading on the external surface and imbibition into pores upon wetting. Static contact angles and volume loss by imbibition measured right upon droplet deposition indicate that biofilms of higher incubation times show a higher porosity and effective hydrophilicity. Furthermore, during subsequent rotation tests, using Kerberos device, these properties dictate a peculiar forced wetting/spreading behavior. As rotation speed increases a long liquid tail forms progressively at the rear part of the droplet, which stays pinned at all times, while only the front part of the droplet depins and spreads. Interestingly, the experimentally determined retention force for the onset of droplet sliding on biofilm external surface is lower than that on pure glass. An effort is made to describe such complex forced wetting phenomena by presenting apparent contact angles, droplet length, droplet shape contours, and edges position as obtained from detailed image analysis.

Effect of Drinking Water Distribution System Design on Antimicrobial Delivery to Pigs

Simple Summary

The piped water system in buildings that house growing pigs is used on many farms for short periods to medicate pigs with antimicrobials, in order to keep them healthy and productive. However, the effect that the design of a building’s water system has on antimicrobial delivery to pigs in pens throughout the building is not known. Thus, we tracked the antimicrobial concentration in water available to pigs at four drinkers during four in-water dosing events, each conducted with looped water systems differing in their design. We found that the water system’s design and the pigs’ water usage and drinking patterns had a large influence on water flow and, therefore, the amount of antimicrobial delivered to pigs in each pen over time. We discovered that by using a circulator pump in a building’s looped water system, all pigs within a building could be delivered the same antimicrobial concentration in water over time. We also showed how a hydraulic modelling tool can be used to predict the antimicrobial concentration at drinkers over time in a specific building during a dosing event. This provides an opportunity to compare alternative in-water dosing schedules for pigs in a given building and select the one likely to be the most effective.

Abstract

On many pig farms, growing pigs are mass-medicated for short periods with antimicrobial drugs through their drinking water for metaphylaxis and to treat clinical disease. We conducted a series of four prospective observational cohort studies of routine metaphylactic in-water antibiotic dosing events on a commercial pig farm, to assess the concentration of antimicrobial available to pigs throughout a building over time. Each dosing event was conducted by the farm manager with a differently designed looped water distribution system (WDS). We found that the antimicrobial concentration in water delivered to pigs at drinkers in each pen by a building’s WDS over time was profoundly influenced by the design of the WDS and the pigs’ water usage and drinking pattern, and that differences in the antimicrobial concentration in water over time at drinkers throughout a building could be eliminated through use of a circulator pump in a looped WDS. We also used a hydraulic WDS modelling tool to predict the antimicrobial concentration at drinkers over time during and after a dosing event. Our approach could be used to evaluate alternative in-water dosing regimens for pigs in a specific building in terms of their clinical efficacy and ability to suppress the emergence of antimicrobial resistance, and to determine the optimal regimen. The approach is applicable to all additives administered through drinking water for which the degree of efficacy is dependent on the dose administered.

Microbial diversity in full-scale water supply systems through sequencing technology: a review

The prevalence of microorganisms in full-scale water supply systems raises concerns about their pathogenicity and threats to public health. Clean tap water is essential for public health safety. The conditions of the water treatment process from the source water to tap water, including source water quality, water treatment processes, the drinking water distribution system (DWDS), and building water supply systems (BWSSs) in buildings, greatly influence the bacterial community in tap water. Given the importance of drinking water biosafety, the study of microbial diversity from source water to tap water is essential. With the development of molecular biology methods and bioinformatics in recent years, sequencing technology has been applied to study bacterial communities in full-scale water supply systems. In this paper, changes in the bacterial community and the influence of each treatment stage on microbial diversity in full-scale water supply systems are classified and analyzed. Microbial traceability analysis and control are discussed, and suggestions for future drinking water biosafety research and its prospects are proposed.

Effects of turbulence fluctuation intensity in bioreactor of sewage treatment on physical and chemical properties of biofilms

The flow velocity plays an important role in the growth and characteristics of biofilm in the bioreactor as well as its treatment efficiency, which has been a hot research topic. In a sewage treatment bioreactor, the type of flow is usually turbulence. According to the methods of Reynolds decomposition, the flow velocity of turbulence consists of the time-mean velocity and fluctuation velocity, which usually exist simultaneously in real flow. However, the current research on the influence of turbulence flow velocity mainly focuses on the time-mean velocity, while the fluctuation velocity has not been reported because of very difficult to control. To this end, in this paper, a laboratory oscillating-grid turbulence (OGT) bioreactor with zero time-mean velocity and only fluctuation velocity was designed. In this bioreactor, the fluctuation velocity could be easily manipulated by varying the operational parameters of the grid. Based on the numerical simulation of Gas-liquid two-phase flow, the distributions of fluctuation velocity and corresponding turbulence fluctuation intensity, gas holdup, and Reynolds stress were obtained. After that, the effects of the turbulent fluctuation intensity on the biofilm thickness, density, and composition of extracellular polymeric substances (EPS) were studied experimentally. The results showed that turbulent fluctuation had a significant effect on the physical and chemical properties of biofilms, and the fluctuation velocity promoted the increase in the biofilm density and the content of protein and carbohydrates in EPS. This study was intended to provide theoretical support for the design and operation optimization of bioreactors.

Influence of pipe materials on the microbial community in unchlorinated drinking water and biofilm

Biodegradable compounds can cause undesired microbial growth in drinking water systems and these compounds can originate from the water or pipe materials used in drinking water systems. The aim of our study was to determine the influence of different pipe materials on the microbial populations in water and biofilm under semi-stagnant conditions. The microbial communities in biofilm and water, which were in contact with seven different materials, were characterized by determining ATP concentrations, microbial composition gene copy numbers of some specific microbial groups. The ATP concentration in water and biofilm varied between the different materials with glass (negative control) < copper < PVCC < PE-Xc < PE-Xb < PE-100 < PVC-P. Gene copy numbers of Legionella spp., Mycobacterium spp., Pseudomonas spp., Aeromonas spp., fungi and Vermamoeba vermiformis were also higher for PVC-P and PE than for glass, copper and PVCC. The bacterial community composition in water and biofilm varied between materials as well. PERMANOVA and CAP analysis demonstrated that copper and PVC-P are different when compared to the other materials. Furthermore, bacterial community composition and ATP concentrations in water and biofilm were similar after eight and 16 weeks incubation, but differed from results obtained after one week. Finally, the ATP, the specific microbial groups and the bacterial community composition also differed between water and biofilm on each material. We conclude from our study that pipe material is an important factor that influences the biomass concentration, abundance of specific microorganisms and the bacterial community composition in distribution systems with unchlorinated drinking water.

Hydrodynamics and surface properties influence biofilm proliferation

A biofilm is an interface-associated colloidal dispersion of bacterial cells and excreted polymers in which microorganisms find protection from their environment. Successful colonization of a surface by a bacterial community is typically a detriment to human health and property. Insight into the biofilm life-cycle provides clues on how their proliferation can be suppressed. In this review, we follow a cell through the cycle of attachment, growth, and departure from a colony. Among the abundance of factors that guide the three phases, we focus on hydrodynamics and stratum properties due to the synergistic effect such properties have on bacteria rejection and removal. Cell motion, whether facilitated by the environment via medium flow or self-actuated by use of an appendage, drastically improves the survivability of a bacterium. Once in the vicinity of a stratum, a single cell is exposed to near-surface interactions, such as van der Waals, electrostatic and specific interactions, similarly to any other colloidal particle. The success of the attachment and the potential for detachment is heavily influenced by surface properties such as material type and topography. The growth of the colony is similarly guided by mainstream flow and the convective transport throughout the biofilm. Beyond the growth phase, hydrodynamic traction forces on a biofilm can elicit strongly non-linear viscoelastic responses from the biofilm soft matter. As the colony exhausts the means of survival at a particular location, a set of trigger signals activates mechanisms of bacterial release, a life-cycle phase also facilitated by fluid flow. A review of biofilm-relevant hydrodynamics and startum properties provides insight into future research avenues.

Effects of surface skewness on local shear stresses, biofilm activity, and microbial communities for wastewater treatment

This study's objective was to assess attachment surface skewness (asymmetric surface height variation) effects on biofilm development. 3D printed molds were used to create surfaces with 300 μm features to provide opposite skewness but identical roughness values. Surfaces with negative skewness had consistently greater nitrite oxidation and biomass growth than other surfaces during biofilm development when studied in annular bioreactor systems. CFD modelling predicted local shear stress differences that could explain experimental results. 16 s rRNA gene amplicon sequencing revealed population differences, including relatively high Acinetobacter and Terrimonas fractions on the negative skew surfaces, and PCoA analyses indicated the flat surface populations diverged from the skew surfaces by the study's end. The results suggest skewness is particularly important in systems where biofilms have not overgrown surface features, as in system startup, thin biofilms, and shorter time frame studies, which includes much previous microbial attachment research.

Potential biofilm control strategies for extended spaceflight missions

Biofilms, surface-adherent microbial communities, are associated with microbial fouling and corrosion in terrestrial water-distribution systems. Biofilms are also present in human spaceflight, particularly in the Water Recovery System (WRS) on the International Space Station (ISS). The WRS is comprised of the Urine Processor Assembly (UPA) and the Water Processor Assembly (WPA) which together recycles wastewater from human urine and recovered humidity from the ISS atmosphere. These wastewaters and various process streams are continually inoculated with microorganisms primarily arising from the space crew microbiome. Biofilm-related fouling has been encountered and addressed in spacecraft in low Earth orbit, including ISS and the Russian Mir Space Station. However, planned future missions beyond low Earth orbit to the Moon and Mars present additional challenges, as resupplying spare parts or support materials would be impractical and the mission timeline would be in the order of years in the case of a mission to Mars. In addition, future missions are expected to include a period of dormancy in which the WRS would be unused for an extended duration. The concepts developed in this review arose from a workshop including NASA personnel and representatives with biofilm expertise from a wide range of industrial and academic backgrounds. Here, we address current strategies that are employed on Earth for biofilm control, including antifouling coatings and biocides and mechanisms for mitigating biofilm growth and damage. These ideas are presented in the context of their applicability to spaceflight and identify proposed new topics of biofilm control that need to be addressed in order to facilitate future extended, crewed, spaceflight missions.

Antibiofilm Properties of Temporin-L on Pseudomonas fluorescens in Static and In-Flow Conditions

Biofilms consist of a complex microbial community adhering to biotic or abiotic surfaces and enclosed within a protein/polysaccharide self-produced matrix. The formation of this structure represents the most important adaptive mechanism that leads to antibacterial resistance, and therefore, closely connected to pathogenicity. Antimicrobial peptides (AMPs) could represent attractive candidates for the design of new antibiotics because of their specific characteristics. AMPs show a broad activity spectrum, a relative selectivity towards their targets (microbial membranes), the ability to act on both proliferative and quiescent cells, a rapid mechanism of action, and above all, a low propensity for developing resistance. This article investigates the effect at subMIC concentrations of Temporin-L (TL) on biofilm formation in Pseudomonas fluorescens (P. fluorescens) both in static and dynamic conditions, showing that TL displays antibiofilm properties. Biofilm formation in static conditions was analyzed by the Crystal Violet assay. Investigation of biofilms in dynamic conditions was performed in a commercial microfluidic device consisting of a microflow chamber to simulate real flow conditions in the human body. Biofilm morphology was examined using Confocal Laser Scanning Microscopy and quantified via image analysis. The investigation of TL effects on P. fluorescens showed that when subMIC concentrations of this peptide were added during bacterial growth, TL exerted antibiofilm activity, impairing biofilm formation both in static and dynamic conditions. Moreover, TL also affects mature biofilm as confocal microscopy analyses showed that a large portion of preformed biofilm architecture was clearly perturbed by the peptide addition with a significative decrease of all the biofilm surface properties and the overall biomass. Finally, in these conditions, TL did not affect bacterial cells as the live/dead cell ratio remained unchanged without any increase in damaged cells, confirming an actual antibiofilm activity of the peptide.

Biofilm architecture: An emerging synthetic biology target

Synthetic biologists are exploiting biofilms as an effective mechanism for producing various outputs. Metabolic optimization has become commonplace as a method of maximizing system output. In addition to production pathways, the biofilm itself contributes to the efficacy of production. The purpose of this review is to highlight opportunities that might be leveraged to further enhance production in preexisting biofilm production systems. These opportunities may be used with previously established production systems as a method of improving system efficiency further. This may be accomplished through the reduction in the cost of establishing and maintaining biofilms, and maintenance of the enhancement of product yield per unit of time, per unit of area, or per unit of required input.

Wide-scale study of 206 buildings in the Netherlands from 2011 to 2015 to determine the effect of drinking water management plans on the presence of Legionella spp

Previous analysis of the Dutch National Legionella Outbreak Detection Program 2002-2012 has shown that buildings required to maintain a Legionella control plan for their drinking water installation are more likely to test positive for Legionella spp. Than buildings without such a plan (38% versus 22% of samples). To clarify this discrepancy, we analysed the results of mandatory water sample testing conducted as part of risk assessments in 206 buildings in the Netherlands from 2011 to 2015. Of the 6171 samples analysed, 16.2% exceeded the Dutch drinking water standard for Legionella spp. of 100 CFU/litre. In buildings with ≤50 tap points, the average percentage of samples containing ≥100 CFU/litre was 28.2%, and from buildings with >50 tap points, it was 12.2%. Analysis of serial samples (taken every 6 months) from each building showed that 33.2% of all buildings tested positive for at least one sample every 6 months. The overall increase was 4.4% per year. Analysis of Legionella subgroups showed that while the majority of positive samples contained L. non-pneumophila (96.9%), some samples did contain L. pneumophila serogroup 1 (1.0%) and serogroups 2-14 (2.1%). Our data suggest that the Dutch mandatory risk assessment and drinking water management plan is not sufficiently effective in preventing the proliferation of Legionella spp. and may even contribute to proliferation. This analysis should now be expanded to include other areas of the Netherlands in order to understand the geographical differences that we observed in our results, and why smaller buildings appear to be more likely to test positive for Legionella spp.

The Role of the Motility of Methylobacterium in Bacterial Interactions in Drinking Water

Bacterial motility is one important factor that affects biofilm formation. In drinking water there are key bacteria in aggregation, whose biology acts to enhance the formation of biofilms. However, it is unclear whether the motility of these key bacteria is an important factor for the interactions between bacteria in drinking water, and, subsequently, in the formation of aggregates, which are precursors to biofilms. Thus, the role of the motility of one of these key bacteria, the Methylobacterium strain DSM 18358, was investigated in the interactions between bacteria in drinking water. The motility of pure Methylobacterium colonies was initially explored; if it was affected by the viscosity of substrate, the temperature, the available energy and the type of substrate. Furthermore, the role of Methylobacterium in the interactions between mixed drinking water bacteria was investigated under the mostly favourable conditions for the motility of Methylobacterium identified before. Overall, the motility of Methylobacterium was found to play a key role in the communication and interactions between bacteria in drinking water. Understanding the role of the motility of key bacteria in drinking water might be useful for the water industry as a potential tool to control the formation of biofilms in drinking water pipes.