Highly efficient nitrate and phosphorus removal and adsorption of tetracycline by precipitation in a chitosan/polyvinyl alcohol immobilized bioreactor

Functional materials contributing to the removal of chlorinated hydrocarbons from soil and groundwater: Classification and intrinsic chemical-biological removal mechanisms

Chlorinated hydrocarbons (CHs) are the main contaminants in soil and groundwater and have posed great challenge on the remediation of soil and ground water. Different remediation materials have been developed to deal with the environmental problems caused by CHs. Remediation materials can be classified into three main categories according to the corresponding technologies: adsorption materials, chemical reduction materials and bioaugmentation materials. In this paper, the classification and preparation of the three materials are briefly described in terms of synthesis and properties according to the different types. Then, a detailed review of the remediation mechanisms and applications of the different materials in soil and groundwater remediation is presented in relation to the various properties of the materials and the different challenges encountered in laboratory research or in the environmental application. The removal trends in different environments were found to be largely similar, which means that composite materials tend to be more effective in removing CHs in actual remediation. For instance, adsorbents were found to be effective when combined with other materials, due to the ability to take advantage of the respective strengths of both materials. The rapid removal of CHs while minimizing the impact of CHs on another material and the material itself on the environment. Finally, suggestions for the next research directions are given in conjunction with this paper.

Construction of Highly Active Zn3In2S6 (110)/g-C3N4 System by Low Temperature Solvothermal for Efficient Degradation of Tetracycline under Visible Light

Herein, Zn3In2S6 photocatalyst with (110) exposed facet was prepared by low temperature solvothermal method. On this basis, a highly efficient binary Zn3In2S6/g-C3N4 was obtained by low temperature solvothermal method and applied to the degradation of tetracycline (TC). The samples of the preparation were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, UV–vis diffuse reflection spectroscopy, and photoluminescence spectroscopy. Furthermore, the degradation performance of photocatalysts on TC was investigated under different experimental conditions. Finally, the mechanism of Zn3In2S6/g-C3N4 composite material degrading TC is discussed. The results show that Zn3In2S6 and Zn3In2S6/g-C3N4 photocatalysts with excellent performance could be successfully prepared at lower temperature. The Zn3In2S6/g-C3N4 heterojunction photocatalyst could significantly improve the photocatalytic activity compared with g-C3N4. After 150 min of illumination, the efficiency of 80%Zn3In2S6/g-C3N4 to degrade TC was 1.35 times that of g-C3N4. The improvement of photocatalytic activity was due to the formation of Zn3In2S6/g-C3N4 heterojunction, which promoted the transfer of photogenerated electron–holes. The cycle experiment test confirmed that Zn3In2S6/g-C3N4 composite material had excellent stability. The free radical capture experiment showed that ·O2− was the primary active material. This study provides a new strategy for the preparation of photocatalysts with excellent performance at low temperature.

Ag-TiO2/biofilm/nitrate interface enhanced visible light-assisted biodegradation of tetracycline: The key role of nitrate as the electron accepter

Due to the pivotal role of Ag-TiO₂/biofilm/nitrate interface, enhanced visible light-assisted biodegradation of tetracycline (TC) in anoxic system was realized through both batch experiment and long-term operation in this study. The results of the batch experiment elucidated that 50 mg L^-1 TC could be completely removed within 10 h in Ag-TiO₂/biofilm/nitrate system. The continuous flow experiment was operated for 75 d to evaluate the performance and stability of Ag-TiO₂/biofilm/nitrate system. TC removal efficiency in Ag-TiO₂/biofilm/nitrate system was as high as 92.4 ± 1.6% at influent TC concentration of 50 mg L^-1 TC and hydraulic retention time (HRT) of 10 h, which would be attributed to the promoted separation of photoholes and photoelectrons at the presence of nitrate as electron acceptor. Facilitated electron transfer between semiconductor and biofilm was beneficial for enhancing TC biodegradation, thus lowering toxicity of intermediate products and promoting microbial activity. Moreover, the species related to TC biodegradation (Rhodopseudomonas, Phreatobacter and Stenotrophomonas), denitrification (Thauera) and electron transfer (Delftia) were enriched at Ag-TiO₂/biofilm/nitrate interface. Besides, a possible mechanism involved in enhanced TC degradation and nitrogen removal at Ag-TiO₂/biofilm/nitrate interface was proposed. This study provided a novel and promising strategy to enhance recalcitrant TC removal from industrial wastewater.

Denitrification performance of nitrate-dependent ferrous (Fe2+) oxidizing Aquabacterium sp. XL4: Adsorption mechanisms of bio-precipitation of phenol and estradiol

In this study, a nitrate-dependent ferrous (Fe²⁺) oxidizing strain under anaerobic conditions was selected and identified as XL4, which belongs to Aquabacterium. The Box-Behnken design (BBD) was used to optimize the growth conditions of strain XL4, and the nitrate removal efficiency of strain XL4 (with 10% inoculation dosage, v/v) could reach 91.41% under the conditions of 30.34 ℃, pH of 6.91, and Fe²⁺ concentration of 19.69 mg L^-1. The results of Fluorescence excitation-emission matrix spectra (EEM) revealed that the intensity of soluble microbial products (SMP), aromatic proteins and the fulvic-like materials were obvious difference under different Fe²⁺ concentration, pH, and temperature. X-ray diffraction (XRD) data confirmed that the main components of bio-precipitation were Fe₃O₄ and FeO(OH), which were believed to be responsible for the adsorption of phenol and estradiol. Furthermore, the maximum adsorption capacity of bio-precipitation for phenol and estradiol under the optimal conditions were 192.6 and 65.4 mg g^-1, respectively. On the other hand, the adsorption process of phenol and estradiol by bio-precipitation confirmed to the pseudo-second-order and Langmuir model, which shows that the adsorption process is chemical adsorption and occurs on the uniform surface.

Self-immobilized biochar fungal pellet combined with bacterial strain H29 enhanced the removal performance of cadmium and nitrate

A newly isolated strain Phoma sp. ZJ6, which could form fungal pellet (FP) by self-immobilization, was identified. A novel longan seed biochar embedded in FP (BFP) combined with strain H29 (BFP-H29) effectively improved the Cd(II) removal efficiency and simultaneously removed nitrate. The adsorption process of BFP was well fitted with the pseudo-second-order kinetics model and Langmuir isotherm model, which demonstrated that the adsorption process was favorable and mainly dominated by chemisorption. Compared with single FP, biochar, and strain H29, BFP-H29 significantly enhanced the Cd(II) removal and the removal ratio reached 90.47%. Meanwhile, the simultaneous removal efficiency of the BFP-H29 for nitrate could reach 93.80%. Characterization analysis demonstrated that the primary removal mechanisms of BFP-H29 were precipitation and surface complexation. BFP-H29 had excellent performance in simultaneous removal of Cd(II) and nitrate, indicating its potential as a promising composite in the removal of cadmium and nitrate in wastewater.

Simultaneous removal of nitrate and diethyl phthalate using a novel sponge-based biocarrier combined modified walnut shell biochar with Fe3O4 in the immobilized bioreactor

A novel biological carrier combining sponge and modified walnut shell biochar with Fe₃O₄ (MWSB@Fe₃O₄) was fabricated to achieve simultaneous removal of nitrate and diethyl phthalate (DEP). The optimal reaction conditions of the immobilized bioreactor were: carbon to nitrogen (C/N) ratio of 1.5, Fe²⁺ concentration of 20 mg L^-1, and hydraulic retention time (HRT) of 8 h. Under the optimal conditions and DEP concentration of 800 μg L^-1, the highest removal efficiency of DEP and nitrate in the immobilized bioreactor with the novel biological carrier were 67.87% and 83.97% (68.43 μg L^-1 h^-1 and 1.71 mg L^-1 h^-1), respectively. Scanning electron microscopy (SEM) showed that the novel biological carrier in this study carried more bio-sediments which is closely related to the denitrification efficiency. The gas chromatography (GC) data showed that the nitrogen production of the immobilized bioreactor (99.85%) was higher than that of another experimental group (97.84%). Fluorescence excitation-emission matrix (EEM) and Fourier transform infrared spectrometer (FTIR) indicated the immobilized bioreactor emerged more extracellular polymeric substances (EPS) which was related to favourable biological stability under the DEP environment. Moreover, according to high-throughput sequencing data, the Zoogloea sp. L2 responsible for iron-reduction and denitrification was the main strain in this immobilized bioreactor.

Fungal pellets immobilized bacterial bioreactor for efficient nitrate removal at low C/N wastewater

In this study, fungal pellets immobilized denitrifying Pseudomonas stutzeri sp. GF3 was cultivated to establish a bioreactor. The denitrification effect of fixed bacteria with fungal pellets was tested by response surface methodology (RSM). Analysis of the bioreactor showed that the denitrification efficiency reached 100% under the optimal conditions and the denitrification efficiency of the actual wastewater treatment in the stable phase reached 95.91%. Moreover, the organic matter and functional groups in the bioreactor under different C/N conditions were analyzed by fluorescence excitation-emission matrix (EEM) spectra and Fourier transform infrared spectroscopy (FTIR), which revealed that metabolic activities of denitrifying bacteria were enhanced with the increase of C/N. The morphology and structure of bacteria immobilized by fungal pellets explored by scanning electron microscope (SEM) showed the filamentous porous fungal pellets loaded with bacteria. Community structure analysis by high-throughput sequencing demonstrated that strain GF3 might was the dominant strain in bioreactor.

Efficient removal of nitrate, manganese, and tetracycline by a polyvinyl alcohol/sodium alginate with sponge cube immobilized bioreactor

The co-existence of nitrate, manganese (Mn), and antibiotics are of a wide concern. In this study, a denitrifying and manganese-oxidizing Zoogloea Q7 bacterium was immobilized using polyvinyl alcohol/sodium alginate with sponge cube (PVA/SA@sponge cube) in the reactor. The optimal operation parameters of the bioreactor were explored. Maximum nitrate, Mn(II), and tetracycline (TC) removal efficiencies of 93.00, 72.34, and 57.32% were achieved with HRT of 10 h, pH of 6.5, Mn(II) concentration of 20 mg L^-1, and TC of 1 mg L^-1, respectively. Fluorescence excitation-emission matrix (EEM) proved that the microorganism in the bioreactor was greatly active. Scanning electron microscope (SEM) images demonstrated that Zoogloea Q7 was commendably immobilized on the novel material. X-ray diffraction (XRD) analysis suggested that the bioprecipitate was mainly composed of MnO₂ and MnCO_3. Through high-throughput analysis, Zoogloea sp. Q7 was considered to be the dominant bacteria present in the bioreactor.