Enhancement of ε-poly-L-lysine production in Streptomyces griseofuscus by addition of exogenous astaxanthin

Enhancement of poly‑γ‑L‑diaminobutanoic acid production in Bacillus pumilus by repeated pH shocks

This study investigated the effect of pH on poly-γ-L-diaminobutanoic acid (γ-PAB) production by Bacillus pumilus in batch fermentation. In the natural fermentation where pH was not controlled, pH decreased from initial 7.0 to 3.0 in 18 h and γ-PAB production was 428.6 mg/L. In the pH-controlled fermentation, B. pumilus tended to proliferation at higher pH, while γ-PAB synthesis was favorable at lower pH, in which the optimal pH for γ-PAB production was 4.2, and γ-PAB yield reached 2284.5 mg/L. Adopting a pH shock strategy which lasted 9 h in the pre-fermentation phase, biomass (OD600) and γ-PAB yield of B. pumilus were obtained as 61.3 and 2794.6 mg/L, respectively, which were 10.8% and 22.4% higher than those in batch fermentation without pH shock. Subsequent fermentation of repeated pH shocks showed that a further higher productivity could be achieved, in which the final OD600 reached 65.1, and γ-PAB production reached as high as 3482.3 mg/L, which were increased by 6.2% and 17.1% compared with those in single pH shock, respectively. This study demonstrated that B. pumilus can synthesize more γ-PAB at suboptimal pH and provided a novel approach to regulate γ-PAB synthesis.

Enhanced ε‑poly‑L‑lysine production in Streptomyces species by combining interspecific hybridization with multiple antibiotic resistance

To improve the ε-PL production in wild-type strains of Streptomyces. albulus, Streptomyces. noursei, Streptomyces. rochei and Streptomyces. yunnanensis, the interspecific hybridization based on protoplast fusion was first performed. Two-species hybridizations failed to obtain hybrids with significant increase in ε-PL production, but four-species hybridizations succeed in acquiring many high-yield hybrids. 16S rDNA homology alignment and RAPD confirmed that the hybrid HX17 was restructured by integrating gene fragments from S. albulus and S. rochei with S. noursei as the carrier. S. noursei HX17 was subsequently suffered from mutagenesis and genome shuffling combining with multiple antibiotic resistance, and a mutant S. noursei GX6 was obtained with ε-PL yield of 2.23 g/L in shake-flask fermentation. In fed-batch fermentation, the ε-PL production of GX6 reached 47.2 g/L, which was increased by 95.6% to 136.8% over the wild parents. Ribosomal genes associated with antibiotics were sequenced and majority of mutant strains had mutations at different sites, indicating that the increase of antibiotic resistance was strongly associated with them. This research proved that combining interspecific hybridization with multiple antibiotic resistance was as an effective approach to rapidly improve the ε-PL production in Streptomyces species.

Physiological analysis of the improved ε-polylysine production induced by reactive oxygen species

INTRODUCTION

Epsilon-poly-L-lysine (ε-PL) is produced by Streptomyces species in acidic and aerobic conditions, which inevitably induces rapid generation of reactive oxygen species (ROS). The devastating effects of ROS on biomolecules and cell vitality have been well-studied, while the positive effects of ROS are rarely reported.

RESULTS

In this study, we found that a proper dose of intracellular ROS (about 3.3 μmol H₂O₂ /g DCW) could induce a physiological modification to promote the ε-PL production (from 1.2 to 1.5 g/L). It resulted in larger sizes of colony and mycelial pellets as well as vibrant, aggregated, and more robust mycelia, which were of high capability of ROS detoxication. Physiological studies showed that appropriate doses of ROS activated the metabolism of the pentose phosphate pathway at both transcriptional and enzymatic levels, which was beneficial for biomass accumulation. The biosynthesis of lysine was also promoted in terms of transcriptional regulatory overexpression, increased transcription and enzymatic activity of key genes, larger pools of metabolites in the TCA cycle, replenishment pathway, and diaminoheptanedioic acid pathway. In addition, energy provision was ensured by activated metabolism of the TCA cycle, a larger pool of NADH, and higher activity of the electron transport system. Increased transcription of HrdD and pls further accelerated the ε-PL biosynthesis.

SIGNIFICANCE

These results indicated that ROS at proper intracellular dose could act as an inducing signal to activate the ε-PL biosynthesis, which laid a foundation for further process regulation to maintain optimal ROS dose in industrial ε-PL production and was of theoretical and practical significance.

KEY POINTS

• A proper dose of intracellular ROS positively influences the ε-PL production. • Proper dose of ROS enhanced the mycelial activity and antioxidative capability. • ROS increased lysine synthesis metabolism, energy provision and pls expression.

Recent advances in microbial ε-poly-L-lysine fermentation and its diverse applications

The naturally occurring homo-polyamide biopolymer, ε-poly-L-lysine (ε-PL) consists of 25-35 L-lysine residues with amide linkages between α-carboxyl groups and ε-amino groups. ɛ-PL exhibits several useful properties because of its unusual structure, such as biodegradability, water solubility, no human toxicity, and broad-spectrum antibacterial activities; it is widely applied in the fields of food, medicine, clinical chemistry and electronics. However, current industrial production of ε-PL is only performed in a few countries. Based on an analysis of the physiological characteristics of ε-PL fermentation, current advances that enhance ε-PL fermentation, from strain improvement to product isolation are systematically reviewed, focusing on: (1) elucidating the metabolic pathway and regulatory mechanism of ε-PL synthesis; (2) enhancing biosynthetic performance through mutagenesis, fermentation optimization and metabolic engineering; and (3) understanding and improving the biological activity and functional properties of ε-PL. Finally, perspectives on engineering and exploiting ε-PL as a source material for the production of various advanced materials are also discussed, providing scientific guidelines for researchers to further improve the ε-PL fermentation process.

Biotechnological production and application of epsilon-poly-L-lysine (ε-PL): biosynthesis and its metabolic regulation

Epsilon-poly-L-lysine (ε-PL) is an unusual biopolymer composed of L-lysine produced by several microorganisms, especially by the genus Streptomyces. Due to its excellent antimicrobial activity, good water solubility, high safety, and biodegradable nature, ε-PL with a GRAS status has been widely used in food and pharmaceutical industries. In the past years, studies have focused on the biotechnological production of ɛ-PL, the biosynthetic mechanism of microbial ɛ-PL, and its application. To provide new perspectives from recent advances, the review introduced the methods for the isolation of ɛ-PL producing strains and the biosynthetic mechanism of microbial ɛ-PL. We summarized the strategies for the improvement of ɛ-PL producing strains, including physical and chemical mutagenesis, ribosome engineering and gene engineering, and compared the different metabolic regulation strategies for improving ɛ-PL production, including medium optimization, nutrient supply, pH control, and dissolved oxygen control. Then, the downstream purification methods of ɛ-PL and its recent applications in food and medicine industries were introduced. Finally, we also proposed the potential challenges and the perspectives for the production of ε-PL.

Enhanced ATP and antioxidant levels for cAMP biosynthesis by Arthrobacter sp. CCTCC 2013431 with polyphosphate addition

OBJECTIVES

When citrate and pyruvate were utilized to strengthen ATP generation for high cAMP production, oxidative stress became more severe in cells resulting in lower cell viability and cAMP formation at the late fermentation phase. To further improve cAMP biosynthesis, the effects of polyphosphate on cAMP fermentation performance together with intracellular ATP and oxidation levels were investigated under high oxidative stress condition and then high efficient cAMP fermentation process based on polyphosphate and salvage synthesis was developed and studied.

RESULTS

With 2 g/L-broth sodium hexametaphosphate added at 24 h was determined as the optimal condition for cAMP production by Arthrobacter sp. CCTCC 2013431 in shake flasks. Under high oxidative stress condition caused by adding 15 mg/L-broth menadione, cAMP contents and cell viability were improved greatly due to hexametaphosphate addition and also exceeded those of control (without hexametaphosphate and menadione added) when fermentations were conducted in a 7 L bioreactor. Meanwhile, ATP levels and antioxidant capacity were improved obviously by hexametaphosphate as well. Moreover, a fermentation process with hexametaphosphate and hypoxanthine coupling added was developed by which cAMP concentration reached 7.25 g/L with an increment of 87.1% when compared with only hypoxanthine added batch and the high ROS contents generated from salvage synthesis were reduced significantly.

CONCLUSION

Polyphosphate could improve intracellular ATP levels and antioxidant capacity significantly under high oxidative stress condition resulting in enhanced cell viability and cAMP fermentation production no matter by de novo synthesis or salvage synthesis.

Epsilon-poly-L-lysine: Recent Advances in Biomanufacturing and Applications

ε-poly-L-lysine (ε-PL) is a naturally occurring poly(amino acid) of varying polymerization degree, which possesses excellent antimicrobial activity and has been widely used in food and pharmaceutical industries. To provide new perspectives from recent advances, this review compares several conventional and advanced strategies for the discovery of wild strains and development of high-producing strains, including isolation and culture-based traditional methods as well as genome mining and directed evolution. We also summarize process engineering approaches for improving production, including optimization of environmental conditions and utilization of industrial waste. Then, efficient downstream purification methods are described, including their drawbacks, followed by the brief introductions of proposed antimicrobial mechanisms of ε-PL and its recent applications. Finally, we discuss persistent challenges and future perspectives for the commercialization of ε-PL.

Characterization and engineering of Streptomyces griseofuscus DSM 40191 as a potential host for heterologous expression of biosynthetic gene clusters

Streptomyces griseofuscus DSM 40191 is a fast growing Streptomyces strain that remains largely underexplored as a heterologous host. Here, we report the genome mining of S. griseofuscus, followed by the detailed exploration of its phenotype, including the production of native secondary metabolites and ability to utilise carbon, nitrogen, sulphur and phosphorus sources. Furthermore, several routes for genetic engineering of S. griseofuscus were explored, including use of GusA-based vectors, CRISPR-Cas9 and CRISPR-cBEST-mediated knockouts. Two out of the three native plasmids were cured using CRISPR-Cas9 technology, leading to the generation of strain S. griseofuscus DEL1. DEL1 was further modified by the full deletion of a pentamycin BGC and an unknown NRPS BGC, leading to the generation of strain DEL2, lacking approx. 500 kbp of the genome, which corresponds to a 5.19% genome reduction. DEL2 can be characterized by faster growth and inability to produce three main native metabolites: lankacidin, lankamycin, pentamycin and their derivatives. To test the ability of DEL2 to heterologously produce secondary metabolites, the actinorhodin BGC was used. We were able to observe a formation of a blue halo, indicating a potential production of actinorhodin by both DEL2 and a wild type.

Enhanced endogenous amino acids and energy metabolism level for cAMP biosynthesis by Arthrobacter sp. CCTCC 2013431 with citrate as cosubstrate

OBJECTIVES

In our previous study, citrate was used as auxiliary energy substance for improving cAMP fermentation performance, however, the regulation mechanism of citrate on improved cAMP contents was not clear. To elucidate the regulation mechanism, cAMP fermentations with/without citrate addition were conducted in a 7 L fermentor using Arthrobacter sp. CCTCC 2013431 and assays on key enzymes activities, energy metabolism level, amino acids contents and peroxidation level were performed.

RESULTS

With 3 g/L-broth sodium citrate added, cAMP concentration and conversion yield from glucose reached 4.34 g/L and 0.076 g/g which were improved by 30.7% and 29.8%, respectively, when compared with those of control. Citrate changed carbon flux distribution among different routes and more carbon flux was directed into pentose phosphate pathway beneficial to cAMP synthesis. Meanwhile, energy metabolism together with precursor amino acids levels were improved significantly owing to strengthened metabolic intensity of tricarboxylate cycle by exogenous citrate utilization which provided energy and substance basis for cAMP production. Moreover, higher glutamate synthesis and oxidative stress caused by citrate addition consumed excessive NADPH derived from pentose phosphate pathway by which feedback suppression for pentose phosphate pathway was relieved efficiently.

CONCLUSION

Citrate promoted cAMP fermentation production by Arthrobacter sp. CCTCC 2013431 due to enhanced precursor amino acids, energy metabolism level and relieved feedback suppression for pentose phosphate pathway.

Recent Advances in Epsilon-Poly-L-Lysine and L-Lysine-Based Dendrimer Synthesis, Modification, and Biomedical Applications

With the advantages in biocompatibility, antimicrobial ability, and comparative facile synthesis technology, poly-L-lysine (PLL) has received considerable attention in recent years. Different arrangement forms and structures of the backbone endow lysine-based polymers with versatile applications, especially for ε-poly-L-lysine (EPL) and lysine-based dendrimer (LBD) compounds. This review summarized the advanced development of the synthesis and modification strategies of EPL and LBD, focus on the modification of bio-synthesis and artificial synthesis, respectively. Meanwhile, biomedical fields, where EPL and LBD are mainly utilized, such as agents, adjuvants, or carriers to anti-pathogen or used in tumor or gene therapies, are also introduced. With the deeper of knowledge of pharmacodynamics and pharmacokinetics of the drug system, the design and synthesis of these drugs can be further optimized. Furthermore, the performances of combination with other advanced methodologies and technologies demonstrated that challenges, such as scale production and high expenses, will not hinder the prospective future of lysine-based polymers.

Biomedical Applications of Bacteria-Derived Polymers

Plastics have found widespread use in the fields of cosmetic, engineering, and medical sciences due to their wide-ranging mechanical and physical properties, as well as suitability in biomedical applications. However, in the light of the environmental cost of further upscaling current methods of synthesizing many plastics, work has recently focused on the manufacture of these polymers using biological methods (often bacterial fermentation), which brings with them the advantages of both low temperature synthesis and a reduced reliance on potentially toxic and non-eco-friendly compounds. This can be seen as a boon in the biomaterials industry, where there is a need for highly bespoke, biocompatible, processable polymers with unique biological properties, for the regeneration and replacement of a large number of tissue types, following disease. However, barriers still remain to the mass-production of some of these polymers, necessitating new research. This review attempts a critical analysis of the contemporary literature concerning the use of a number of bacteria-derived polymers in the context of biomedical applications, including the biosynthetic pathways and organisms involved, as well as the challenges surrounding their mass production. This review will also consider the unique properties of these bacteria-derived polymers, contributing to bioactivity, including antibacterial properties, oxygen permittivity, and properties pertaining to cell adhesion, proliferation, and differentiation. Finally, the review will select notable examples in literature to indicate future directions, should the aforementioned barriers be addressed, as well as improvements to current bacterial fermentation methods that could help to address these barriers.