Design for preparation of more active cross-linked enzyme aggregates of Burkholderia cepacia lipase using palm fiber residue

Thermosensitive polymer-assisted extraction and purification of fungal laccase from citrus pulp wash effluent

BACKGROUND

This study explores the use of liquid-liquid extraction with thermosensitive polymers for producing laccase (Lac) from Pleurotus sajor-caju. This process leverages liquid waste from the citrus industry, specifically pulp wash. The research delves into extractive fermentation and thermoseparation, both processes being facilitated by a polymer exhibiting a lower critical solution temperature transition.

RESULTS

Key factors considered include the choice of polymer, its concentration, pH, separation temperature, and the behavior of the polymer-rich phase post-extractive fermentation concerning the lower critical solution temperature. Notably, under conditions of 45% by weight of Pluronic L-61 and pH 5.0 at 25 °C, the Lac resulted in an enhancement in the purification factor of 28.4-fold, compared with the Lac obtained directly from the fermentation process on the eighth day. There was an 83.6% recovery of the Lac enzyme in the bottom phase of the system. Additionally, the unique properties of Pluronic L-61, which can induce phase separation and also allow for thermoseparation, led to a secondary fraction (aqueous solution) of Lac with purification factor of 2.1 ± 0.1-fold (at 32 ± 0.9 °C and 30 ± 0.3 min without stirring) from the polymeric phase (top phase). Fourier-transform infrared analysis validated the separation data, particularly highlighting the α-helix content in the amide I region (1600-1700 cm-1 ).

CONCLUSION

In summary, the insights from this study pave the way for broader industrial applications of these techniques, underscoring benefits like streamlined process integration, heightened selectivity, and superior separation efficacy. © 2023 Society of Chemical Industry.

An Overview of Crosslinked Enzyme Aggregates: Concept of Development and Trends of Applications

Enzymes are commonly used as biocatalysts for various biological and chemical processes in industrial applications. However, their limited operational stability, catalytic efficiency, poor reusability, and high-cost hamper further industrial usage. Thus, crosslinked enzyme aggregates (CLEAs) are developed as a better enzyme immobilization tool to extend the enzymes' operational stability. This immobilization method is appealing because it is simpler due to the absence of ballast and permits the collective use of crude enzyme cocktails. CLEAs, so far, have been successfully developed using a variety of enzymes, viz., hydrolases, proteases, amidases, lipases, esterases, and oxidoreductase. Recent years have seen the emergence of novel strategies for preparing better CLEAs, which include the combi- and multi-CLEAs, magnetics CLEAs, and porous CLEAs for various industrial applications, viz., laundry detergents, organic synthesis, food industries, pharmaceutical applications, oils, and biodiesel production. To better understand the different strategies for CLEAs' development, this review explores these strategies and highlights the relevant concerns in designing innovative CLEAs. This article also details the challenges faced during CLEAs preparation and solutions for overcoming them. Finally, the trending strategies to improve the preparation of CLEAs alongside their industrial application trends are also discussed.

Innovative biocatalyst synthesis of pectinolytic enzymes by cross-linking strategy: Potentially immobilised pectinases for the production of pectic-oligosaccharides from pectin

Pectinases are outstanding multienzymes, which have the potential to produce new emerging pectic-oligosaccharides (POS) via enzymatic hydrolysis of pectin. However, free pectinase is unable to undergo repeated reaction for the production of POS. This study proposed a sustainable biocatalyst of pectinases known as cross-linked pectinase aggregates (CLPA). Pectinase from Aspergillus aculeatus was successfully precipitated using 2 mg/mL pectinase and 60 % acetone for 20 min at 20 °C, which remained 36.3 % of its initial activity. The prepared CLPA showed the highest activity recovery (85.0 %), under the optimised conditions (0.3 % (v/v) starch and glutaraldehyde mixture (St/Ga), 1.5: 1 of St/Ga, 25 °C, 1.5 h). Furthermore, pectin-degrading enzymes from various sources were used to produce different CLPA. The alteration of pectinase secondary structure gave high stability in acidic condition (pH 4), thermostability, deactivation energy and half-life, and improved storage stability at 4 °C for 30 days. Similarly to their free counterpart, the CLPA exhibited comparable enzymatic reaction kinetics and could be reused eight times with approximately 20 % of its initial activity. The developed CLPA does not only efficaciously produced POS from pectin as their free form, but also exhibited better operational stability and reusability, making it more suitable for POS production.

Enzyme immobilization technology as a tool to innovate in the production of biofuels: A special review of the Cross-Linked Enzyme Aggregates (CLEAs) strategy

This review emphasizes the crucial role of enzyme immobilization technology in advancing the production of two main biofuels, ethanol and biodiesel, with a specific focus on the Cross-linked Enzyme Aggregates (CLEAs) strategy. This method of immobilization has gained attention due to its simplicity and affordability, as it does not initially require a solid support. CLEAs synthesis protocol includes two steps: enzyme precipitation and cross-linking of aggregates using bifunctional agents. We conducted a thorough search for papers detailing the synthesis of CLEAs utilizing amylases, cellulases, and hemicellulases. These key enzymes are involved in breaking down starch or lignocellulosic materials to produce ethanol, both in first and second-generation processes. CLEAs of lipases were included as these enzymes play a crucial role in the enzymatic process of biodiesel production. However, when dealing with large or diverse substrates such as lignocellulosic materials for ethanol production and oils/fats for biodiesel production, the use of individual enzymes may not be the most efficient method. Instead, a system that utilizes a blend of enzymes may prove to be more effective. To innovate in the production of biofuels (ethanol and biodiesel), enzyme co-immobilization using different enzyme species to produce Combi-CLEAs is a promising trend.

Combined cross-linked enzyme aggregates of cyclodextrin glucanotransferase and maltogenic amylase from Bacillus lehensis G1 for maltooligosaccharides synthesis

Maltooligosaccharides (MOS) are functional oligosaccharides that can be synthesized through enzymatic cascade reaction between cyclodextrin glucanotransferase (CGTase) and maltogenic amylase (Mag1) from Bacillus lehensis G1. To address the problems of low operational stability and non-reusability of free enzymes, both enzymes were co-immobilized as combined cross-linked enzyme aggregates (Combi-CLEAs-CM) with incorporation of bovine serum albumin (BSA) and Tween 80 (Combi-CLEAs-CM-add). Combi-CLEAs-CM and Combi-CLEAs-CM-add showed activity recoveries of 54.12 % and 69.44 %, respectively after optimization. Combi-CLEAs-CM-add showed higher thermal stability at higher temperatures (40 °C) with longer half-life (46.20 min) as compared to those of free enzymes (36.67 min) and Combi-CLEAs-CM (41.51 min). Both combi-CLEAs also exhibited higher pH stability over pH 5 to pH 9, and displayed excellent reusability with >50 % of initial activity retained after four cycles. The reduction in K_m value of about 22.80 % and 1.76-fold increase in starch hydrolysis in comparison to Combi-CLEAs-CM attested the improvement of enzyme-substrate interaction by Tween 80 and pores formation by BSA in Combi-CLEAs-CM-add. The improved product specificity of Combi-CLEAs-CM-add also produced the highest yield of MOS (492 mg/g) after 3 h. Therefore, Combi-CLEAs-CM-add with ease of preparation, excellent reusability and high operational stability is believed to be highly efficacious biocatalyst for MOS production.

Screening, identification, and characterization of lipase-producing halotolerant Bacillus altitudinis Ant19 from Antarctic soil

Potent lipase-producing and halotolerant Bacillus altitudinis Ant19 strain was screened and isolated from Antarctic soil. The isolate showed broad-range lipase activity against different lipid substrates. Presence of lipase activity was confirmed by PCR amplification and sequencing of the lipase gene from Ant19. The study attempted to establish the use of crude extracellular lipase extract as cheap alternative to purified enzyme by characterizing the crude lipase activity and testing it in certain practical applications. Crude lipase extract from Ant19 showed high stability at 5-28 ℃ (> 97%), while lipase activity was noted in a wide temperature range of 20-60 ℃ (> 69%), with optimum activity at 40 ℃ (117.6%). The optimum lipolytic activity was noted at pH 8 with good activity and stability in alkaline conditions (pH 7-10). Moreover, the lipase activity was substantially stable in various solvents, commercial detergents, and surfactants. It retained 97.4% activity in 1% solution of commercial Nirma detergent. Besides, it was non-regiospecific, and active against substrates having different fatty acid chain lengths with preference for shorter chain length. Further, the crude lipase enhanced the oil stain removal efficiency of commercial detergent from 52 to 77.9%, while 66% oil stain was removed using crude lipase alone. Immobilization process improved the storage stability of crude lipase for 90 days. In our knowledge, it is the first study on characterization of lipase activity from B. altitudinis, which has promising applications in various fields.

Lipase immobilization via cross-linked enzyme aggregates: Problems and prospects - A review

In this review we have focused on the preparation of cross-linked enzyme aggregates (CLEAs) from lipases, as these are among the most used enzyme in bioprocesses. This immobilization method is considered very attractive due to preparation simplicity, non-use of supports and the possibility of using crude enzyme extracts. CLEAs provide lipase stabilization under extreme temperature or pH conditions or in the presence of organic solvents, in addition to preventing enzyme leaching in aqueous medium. However, it presents some problems in the preparation and limitations in their use. The problems in preparation refer mainly to the crosslinking step, and may be solved using an aminated feeder. The problems in handling have been tackled designing magnetic-CLEAs or trapping the CLEAs in particles with better mechanical properties, the substrate diffusion problems has been reduced by producing more porous-CLEAs, etc. The enzyme co-immobilization using combi-CLEAs is also a new tendency. Therefore, this review explores the CLEAs methodology aimed at lipase immobilization and its applications.

Cross-linked enzyme aggregates immobilization: preparation, characterization, and applications

Enzymes are commonly used as biocatalysts for various biological and chemical processes. However, some major drawbacks of free enzymes (e.g. poor reusability and instability) significantly restrict their industrial practices. How to overcome these weaknesses remain considerable challenges. Enzyme immobilization is one of the most effective ways to improve the reusability and stability of enzymes. Cross-linked enzyme aggregates (CLEAs) has been known as a novel and versatile carrier-free immobilization method. CLEAs is attractive due to its simplicity and robustness, without purification. It generally shows: high catalytic specificity and selectivity, good operational and storage stabilities, and good reusability. Moreover, co-immobilization of different kinds of enzymes can be acquired. These CLEAs advantages provide opportunities for further industrial applications. Herein, the preparation parameters of CLEAs were first summarized. Next, characterization of structural and catalytic properties, stability and reusability are also proposed. Finally, some important applications of this technique in: environmental protection, industrial chemistry, food industry, and pharmaceutical synthesis and delivery are introduced. Potential challenges and future research directions, such as improving cross-linking efficiency and internal mass transfer efficiency, are also presented. This implies that CLEAs provide an efficient and feasible technique to improve the properties of enzymes for use in the industry.

An Insight in Developing Carrier-Free Immobilized Enzymes

Enzymes play vital roles in all organisms. The enzymatic process is progressively at its peak, mainly for producing biochemical products with a higher value. The immobilization of enzymes can sometimes tremendously improve the outcome of biocatalytic processes, making the product(s) relatively pure and economical. Carrier-free immobilized enzymes can increase the yield of the product and the stability of the enzyme in biocatalysis. Immobilized enzymes are easier to purify. Due to these varied advantages, researchers are tempted to explore carrier-free methods used for the immobilization of enzymes. In this review article, we have discussed various aspects of enzyme immobilization, approaches followed to design a process used for immobilization of an enzyme and the advantages and disadvantages of various common processes used for enzyme immobilization.

Immobilization and bioimprinting strategies to enhance the performance in organic medium of the metagenomic lipase LipC12

The present work evaluates the immobilization of LipC12 on different supports in tandem with bioimprinting technique, in order to improve its activity and stability in organic medium. Oleic acid was selected as the bioimprinting molecule. The immobilized LipC12 was applied in the synthesis of pentyl oleate by esterification reaction and in the production of fatty acids, mono, and diglycerides via hydrolysis of triacylglycerols, in n-heptane reaction media. For all immobilized lipase preparations, an increase in the conversion of oleic acid to pentyl oleate was observed when immobilization in tandem with bioimprinting treatment was carried out versus immobilization without bioimprinting. The highest conversions were achieved using LipC12 immobilized on hydrophobic supports. The reuse potential of the immobilized preparations was evaluated. The preparations were used in eight successive cycles of esterification reactions and the best results were obtained for LipC12 immobilized on Immobead 150 and chitosan. The activity for the hydrolysis of soybean oil was improved by bioimprinting treatment only for LipC12 immobilized on commercial polypropylene and Accurel MP-1000. LipC12 immobilized on hydrophilic supports or on Immobead150 could be used to hydrolyze tricaprylin to obtain diglycerides with a high proportion of 1,2-diglycerides in reaction times as short as 30 min.

Preparation and synthetic dye decolorization ability of magnetic cross-linked enzyme aggregates of laccase from Bacillus amyloliquefaciens

Laccases are versatile oxidases that are capable of decolorizing various synthetic dyes. Recombinant Bacillus amyloliquefaciens laccase was immobilized as magnetic cross-linked enzyme aggregates (M-CLEAs) for application in dye decolorization. Several parameters influencing the activity recovery were evaluated during the synthesis of M-CLEAs. With ammonium sulfate as precipitant, maximum activity was recovered by cross-linking with 0.16% glutaraldehyde for 1 h. The prepared M-CLEAs exhibited improved activity under alkaline conditions. It remained 74% activity after incubation at 60 °C for 5 h. Enhanced tolerance towards NaCl was also observed for the M-CLEAs, with 68% activity remaining in the presence of 1 M NaCl. The immobilized laccase could rapidly decolorize more than 93% of reactive black 5 and indigo carmine in 1 h, while its catalytic efficiency towards reactive blue 19 was relatively low. After four cycles of consecutive reuse, the M-CLEAs could decolorize 92% of indigo carmine. The easy recovery and reusability of M-CLEAs facilitate the potential application of bacterial laccase in dye decolorization.