Silver-coated megaprosthesis in prevention and treatment of peri-prosthetic infections: a systematic review and meta-analysis about efficacy and toxicity in primary and revision surgery

Characteristics and Epidemiology of Megaprostheses Infections: A Systematic Review

BACKGROUND

Megaprostheses were first employed in oncological orthopedic surgery, but more recently, additional applications have arisen. These implants are not without any risks and device failure is quite frequent. The most feared complication is undoubtedly the implants' infection; however, the exact incidence is still unknown. This systematic review aims to estimate in the current literature the overall incidence of megaprosthesis infections and to investigate possible risk/protective factors.

METHODS

We conducted a systematic search for studies published from July 1971 to December 2023 using specific keywords. To be included, studies needed to report either the megaprosthesis anatomical site, and/or whether the megaprosthesis was coated, and/or the surgical indication as oncological or non-oncological reasons.

RESULTS

The initial literature search resulted in 1281 studies. We evaluated 10,456 patients and the overall infection rate was 12%. In cancer patients, the infection rate was 22%, while in non-oncological patients, this was 16% (trauma 12%, mechanical failure 17%, prosthetic joint infections 26%). The overall infection rates comparing coated and uncoated implants were 10% and 12.5%, respectively.

CONCLUSIONS

The number of megaprosthesis implants is increasing considerably. In traumatological patients, the infection rate is lower compared to all the other subgroups, while the infection rate remains higher in the cancer patient group. As these devices become more common, focused studies exploring epidemiological data, clinical outcomes, and long-term complications are needed to address the uncertainties in prevention and management.

Risk factors for peri-megaprosthetic joint infections in tumor surgery: A systematic review

BACKGROUND

Peri-megaprosthetic joint infections (PJI) in tumor surgery are complex and challenging complications that significantly impact the outcomes of the patients. The occurrence of PJI poses a substantial threat to the success of these operations. This review aims to identify and summarize the risk factors associated with PJI in tumor surgery with megaprosthetic reconstruction as well as to determine the overall risk of PJI in limb salvage surgery.

METHODS

A thorough examination of published literature, scrutinizing the incidence of PJI in tumor prostheses after limb salvage surgery was done. Research studies that documented the incidence of PJI in tumor patients who underwent limb salvage surgery, and explored the risk factors associated with the occurrence of PJI were deemed eligible.

RESULTS

A total of 15 studies were included in the analysis and underwent comprehensive examination. After the exploration of key parameters, several significant risk factors for PJI concerning the type of implant coating, surgical site characteristics, patient demographics, and procedural factors were recorded.

DISCUSSION

The findings underscore the need for a nuanced approach in managing tumor patients undergoing limb salvage surgery and megaprosthetic reconstruction, with emphasis on individualized risk assessments and individualized preventive strategies.

Are silver-coated megaprostheses superior to uncoated megaprostheses in managing chronic end-stage periprosthetic hip and knee infection?

INTRODUCTION

Outcomes for silver coated megaprostheses (SC-MP) used in cases of end-stage periprosthetic joint infection (PJI) have not been clearly defined. Although attractive, concerns over implant longevity and the risk of infection relapse exist among the scientific community. Therefore, we sought to investigate the effect of silver coating in lower-extremity MPs used in such difficult-to-treat scenarios. The study's primary hypothesis was that the periprosthetic infection control rate would be higher in patients with silver-coated implants.

MATERIALS AND METHODS

Non-interventional retrospective study with a historical comparison group. We identified all consecutive end-stage hip and knee PJI cases at our center managed with exchange arthroplasty using a silver-coated megaprosthesis from January 2016 to March 2021, these cases were compared with a historical cohort of end-stage PJI cases managed with uncoated megaprostheses. The main outcome studied was infection control rate. Secondarily, we analyzed the short-to-medium-term survivorship of this type of silver-coated implant.

RESULTS

Fifty-nine megaprostheses used in cases of end-stage PJI were included in this study. We identified 30 cases of chronic hip or knee PJI in which a silver-coated modular megaprosthesis was implanted. Our non-coated megaprosthesis (NC-MP) historical group included 29 patients. Both groups had similar demographic characteristics. We found no statistically significant differences in infection control rate (80% vs. 82.8%, p = 0.47) or implant survivorship (90% vs. 89.65%, p = 1) after a mean follow-up for SC-MP of 46.43 months, and 48 months for the non-coated MP group. In relapsed cases, there were no differences in infection eradication after DAIR (66% SC-MP vs. 60% NC-MP success rate, p = 1). During the follow-up we observed one case of skin argyria without further repercussion.

CONCLUSION

We were unable to confirm our initial hypothesis that use of silver-coated implants in end-stage PJI scenarios may be associated with better outcomes in terms of infection control or implant survivorship.

What to Know about Antimicrobial Coatings in Arthroplasty: A Narrative Review

Periprosthetic joint infections (PJIs) are one of the most worrying complications orthopedic surgeons could face; thus, methods to prevent them are evolving. Apart from systemic antibiotics, targeted strategies such as local antimicrobial coatings applied to prosthetics have been introduced. This narrative review aims to provide an overview of the main antimicrobial coatings available in arthroplasty orthopedic surgery practice. The search was performed on the PubMed, Web of Science, SCOPUS, and EMBASE databases, focusing on antimicrobial-coated devices used in clinical practice in the arthroplasty world. While silver technology has been widely adopted in the prosthetic oncological field with favorable outcomes, recently, silver associated with hydroxyapatite for cementless fixation, antibiotic-loaded hydrogel coatings, and iodine coatings have all been employed with promising protective results against PJIs. However, challenges persist, with each material having strengths and weaknesses under investigation. Therefore, this narrative review emphasizes that further clinical studies are needed to understand whether antimicrobial coatings can truly revolutionize the field of PJIs.

Use of a silver-coated plate to treat a postoperative infection after high tibial osteotomy - a case report

Unilateral osteoarthritis of the knee can be treated by osteotomy. In case of postoperative infection after high tibial osteotomy, treatment can be challenging and often requires implant removal with the risk of loss of reduction. In the presented case, a 47-year old patient suffered postoperative infection after high tibial osteotomy using an angular stable plate with the need for multiple revision surgeries and anti-infective therapy. Implant exchange to a silver-coated angular plate led to infection control with undisturbed wound healing and further bone consolidation. Full bone consolidation could be achieved radiographically 12 months after the last revision surgery. One-step implant exchange using silver-coated implants could be a promising approach to address postoperative infections after high tibial osteotomy.

Topical Application of Vancomycin Powder to Prevent Infections after Massive Bone Resection and the implantation of Megaprostheses in Orthopaedic Oncology Surgery

Introduction

Periprosthetic joint infection (PJI) represents a serious burden in orthopaedic oncology. Through the years, several local expedients have been proposed to minimise the risk of periprosthetic infection. In this study, we report our outcomes using topical vancomycin powder (VP) with the aim to prevent PJIs.

Materials and methods

Fifty oncological cases treated with massive bone resection and the implant of a megaprosthesis were included in our study. Among them, 22 [(GGroup A) received one gram of vancomycin powder on the surface of the implant and another gram on the surface of the muscular fascia]. The remaining 28 did not receive such a treatment (Group B). The rest of surgical procedures and the follow-up were the same for the two groups. Patients underwent periodical outpatient visits, radiographs and blood exams' evaluations. Diagnosis of PJIs and adverse reactions to topical vancomycin were recorded.

Results

None of the cases treated with topical vancomycin developed infections, whereas 6 of the 28 cases (21.4%) who did not receive the powder suffered from PJIs. These outcomes suggest that cases treated with VP had a significantly lower risk of post-operative PJI (p=0.028). None of our cases developed acute kidney failures or any other complication directly or indirectly attributable to the local administration of VP.

Conclusions

The topical use of vancomycin powder on megaprosthetic surfaces and the overlying fascias, alongside with a correct endovenous antibiotic prophylaxis, can represent a promising approach in order to minimise the risk of periprosthetic infections in orthopaedic oncology surgery.

Effects of Aging on Osteosynthesis at Bone-Implant Interfaces

Joint replacement is a common surgery and is predominantly utilized for treatment of osteoarthritis in the aging population. The longevity of many of these implants depends on bony ingrowth. Here, we provide an overview of current techniques in osteogenesis (inducing bone growth onto an implant), which is affected by aging and inflammation. In this review we cover the biologic underpinnings of these processes as well as the clinical applications. Overall, aging has a significant effect at the cellular and macroscopic level that impacts osteosynthesis at bone-metal interfaces after joint arthroplasty; potential solutions include targeting prolonged inflammation, preventing microbial adhesion, and enhancing osteoinductive and osteoconductive properties.

Risk Factors and Management of Prosthetic Joint Infections in Megaprostheses-A Review of the Literature

Prosthetic joint infection (PJI) is the most common mode of failure of megaprostheses, yet the literature on the topic is scarce, and studies report conflicting data regarding the optimal treatment strategy. Patients with megaprostheses PJI are often immunosuppressed, and surgeons must balance the trade-off between treatment efficacy and morbidity associated with the surgery aiming for infection eradication. Our review on megaprostheses PJI focuses on two axes: (1) risk factors and preventative strategies; and (2) surgical strategies to manage this condition. Risk factors were classified as either unmodifiable or modifiable. Attempts to decrease the risk of PJI should target the latter group. Strategies to prevent PJI include the use of silver-coated implants, timely discontinuation of perioperative antibiotic prophylaxis, and adequate soft tissue coverage to diminish the amount of dead space. Regarding surgical treatment, main strategies include debridement, antibiotics, implant retention (DAIR), DAIR with modular component exchange, stem retention (DAIR plus), one-stage, and two-stage revision. Two-stage revision is the "gold standard" for PJI in conventional implants; however, its success hinges on adequate soft tissue coverage and willingness of patients to tolerate a spacer for a minimum of 6 weeks. DAIR plus and one-stage revisions may be appropriate for a select group of patients who cannot endure the morbidity of two surgeries. Moreover, whenever DAIR is considered, exchange of the modular components should be performed (DAIR plus). Due to the low volume of megaprostheses implanted, studies assessing PJI should be conducted in a multi-institutional fashion. This would allow for more meaningful comparison of groups, with sufficient statistical power. Level of evidence: IV.

Therapy of a Chronically Infected Total Femur Prothesis in a 40-year-old Patient

We report a case of a patient who was treated in 1999 at the age of 19 years with a proximal femur replacement due to Ewing sarcoma. After several infection-associated exchange procedures, the patient presented with a fistula and chronic infection of a total femur prosthesis in August 2019 at the age of 40 years. Interdisciplinary treatment with a 3-stage exchange procedure and implantation of a silver-coated total femur prosthesis was successfully performed and hip disarticulation could be avoided. After a follow-up of 2 years, the patient showed uneventful wound healing and full weight bearing without crutches.

Host bone microstructure for enhanced resistance to bacterial infections

Postoperative bacterial infection is a serious complication of orthopedic surgery. Not only infections that develop in the first few weeks after surgery but also late infections that develop years after surgery are serious problems. However, the relationship between host bone and infection activation has not yet been explored. Here, we report a novel association between host bone collagen/apatite microstructure and bacterial infection. The bone-mimetic-oriented micro-organized matrix structure was obtained by prolonged controlled cell alignment using a grooved-structured biomedical titanium alloy. Surprisingly, we have discovered that highly aligned osteoblasts have a potent inhibitory effect on Escherichia coli adhesion. Additionally, the oriented collagen/apatite micro-organization of the bone matrix showed excellent antibacterial resistance against Escherichia coli. The proposed mechanism for realizing the antimicrobial activity of the micro-organized bone matrix is by the controlled secretion of the antimicrobial peptides, including β-defensin 2 and β-defensin 3, from the highly aligned osteoblasts. Our findings contribute to the development of anti-infective strategies for orthopedic surgeries. The recovery of the intrinsically ordered bone matrix organization provides superior antibacterial resistance after surgery.

Silver-Coated Distal Femur Megaprosthesis in Chronic Infections with Severe Bone Loss: A Multicentre Case Series

Periprosthetic joint infections (PJI) and fracture-related infections (FRI) of the distal femur (DF) may result in massive bone defects. Treatment options include articulated silver-coated (SC) megaprosthesis (MP) in the context of a two-stage protocol. However, there is limited evidence in the literature on this topic. A retrospective review of the prospectively maintained databases of three Institutions was performed. Forty-five patients were included. The mean follow-up time was 43 ± 17.1 months. Eight (17.8%) patients had a recurrent infection. The estimated recurrence-free survival rate was 91.1% (93.5% PJI vs. 85.7% FRI) 2 years following MP implantation, and 75.7% (83.2% PJI vs. 64.3% FRI; p = 0.253) after 5 years. No statistically relevant difference was found according to the initial diagnosis (PJI vs. FRI). Among possible risk factors, only resection length was found to significantly worsen the outcomes in terms of infection control (p = 0.031). A total of eight complications not related to infection were found after reimplantation, but only five of them required further surgery. Above-the-knee amputation was performed in two cases (4.4%), both for reinfection. Articulated DF SC MP in a two-stage protocol is a safe and effective treatment for chronic knee infection with severe bone loss.

Zn-Doped Calcium Magnesium Phosphate Bone Cement Based on Struvite and Its Antibacterial Properties

The development of magnesium calcium phosphate bone cements (MCPCs) has garnered substantial attention. MCPCs are bioactive and biodegradable and have appropriate mechanical and antimicrobial properties for use in reconstructive surgery. In this study, the cement powders based on a (Ca + Mg)/P = 2 system doped with Zn²⁺ at 0.5 and 1.0 wt.% were obtained and investigated. After mixing with a cement liquid, the structural and phase composition, morphology, chemical structure, setting time, compressive strength, degradation behavior, solubility, antibacterial activities, and in vitro behavior of the cement materials were examined. A high compressive strength of 48 ± 5 MPa (mean ± SD) was achieved for the cement made from Zn²⁺ 1.0 wt.%-substituted powders. Zn²⁺ introduction led to antibacterial activity against Staphylococcus aureus and Escherichia coli strains, with an inhibition zone diameter of up to 8 mm. Biological assays confirmed that the developed cement is cytocompatible and promising as a potential bone substitute in reconstructive surgery.

Megaprosthesis in Non-Oncologic Settings-A Systematic Review of the Literature

Modular megaprostheses (MPs) are commonly used after bone-tumor resection, but they can offer a limb salvage solution in massive bone defects. The aim of this systematic review of the Literature is to provide a comprehensive data collection concerning the use of MPs in non-oncologic cases, and to provide an overview of this topic, especially from an epidemiologic point of view. Three different databases (PubMed, Scopus, and Web of Science) were searched for relevant articles, and further references were obtained by cross-referencing. Sixty-nine studies met the inclusion criteria, reporting on cases of MP in non-oncologic cases. A total of 2598 MPs were retrieved. Among these, 1353 (52.1%) were distal femur MPs, 941 (36.2%) were proximal femur MPs, 29 (1.4%) were proximal tibia MPs and 259 (10.0%) were total femur MPs. Megaprostheses were most commonly used to treat periprosthetic fractures (1158 cases, 44.6%), in particular in the distal femur (859, 74.2%). Overall, complications were observed in 513 cases (19.7%). Type I (soft tissue failures) and type IV (infection) according to the Henderson classification were the most frequent (158 and 213, respectively). In conclusion, patients with severe post-traumatic deformities and/or significant bone loss who have had previous septic complications should be considered as oncologic patients, not because of the disease, but because of the limited therapeutic options available. The benefits of this treatment include relatively short operative times and immediate weight-bearing, thus making MP particularly attractive in the lower limb.

Antibacterial activity of silver doped hydroxyapatite toward multidrug-resistant clinical isolates of Acinetobacter baumannii

Bacteria Acinetobacter baumannii is a persistent issue in hospital-acquired infections due to its fast and potent development of multi-drug resistance. To address this urgent challenge, a novel biomaterial using silver (Ag⁺) ions within the hydroxyapatite (HAp) lattice has been developed to prevent infections in orthopedic surgery and bone regeneration applications without relying on antibiotics. The aim of the study was to examine the antibacterial activity of mono-substituted HAp with Ag⁺ ions and a mixture of mono-substituted HAps with Sr²⁺, Zn²⁺, Mg²⁺, SeO₃^2- and Ag⁺ ions against the A. baumannii. The samples were prepared in the form of powder and disc and analyzed by disc diffusion, broth microdilution method, and scanning electron microscopy. The results from the disc-diffusion method have shown a strong antibacterial efficacy of the Ag-substituted and mixture of mono-substituted HAps (Sr, Zn, Se, Mg, Ag) toward several clinical isolates. The Minimal Inhibitory Concentrations for the powdered HAp samples ranged from 32 to 42 mg/L (Ag⁺ substituted) and 83-167 mg/L (mixture of mono-substituted), while the Minimal Bactericidal Concentrations after 24 h of contact ranged from 62.5 (Ag⁺) to 187.5-292 mg/L (ion mixture). The lower substitution level of Ag⁺ ions in a mixture of mono-substituted HAps was the cause of lower antibacterial effects measured in suspension. However, the inhibition zones and bacterial adhesion on the biomaterial surface were comparable. Overall, the clinical isolates of A. baumannii were effectively inhibited by substituted HAp samples, probably in the same amount as by other commercially available silver-doped materials, and such materials may provide a promising alternative or supplementation to antibiotic treatment in the prevention of infections associated with bone regeneration. The antibacterial activity of prepared samples toward A. baumannii was time-dependent and should be considered in potential applications.

Evaluation of silver bio-functionality in a multicellular in vitro model: towards reduced animal usage in implant-associated infection research

Background

Despite the extensive use of silver ions or nanoparticles in research related to preventing implant-associated infections (IAI), their use in clinical practice has been debated. This is because the strong antibacterial properties of silver are counterbalanced by adverse effects on host cells. One of the reasons for this may be the lack of comprehensive in vitro models that are capable of analyzing host-bacteria and host-host interactions.

Methods and results

In this study, we tested silver efficacy through multicellular in vitro models involving macrophages (immune system), mesenchymal stem cells (MSCs, bone cells), and S. aureus (pathogen). Our model showed to be capable of identifying each element of culture as well as tracking the intracellular survival of bacteria. Furthermore, the model enabled to find a therapeutic window for silver ions (AgNO₃) and silver nanoparticles (AgNPs) where the viability of host cells was not compromised, and the antibacterial properties of silver were maintained. While AgNO₃ between 0.00017 and 0.017 µg/mL retained antibacterial properties, host cell viability was not affected. The multicellular model, however, demonstrated that those concentrations had no effect on the survival of S. aureus, inside or outside host cells. Similarly, treatment with 20 nm AgNPs did not influence the phagocytic and killing capacity of macrophages or prevent S. aureus from invading MSCs. Moreover, exposure to 100 nm AgNPs elicited an inflammatory response by host cells as detected by the increased production of TNF-α and IL-6. This was visible only when macrophages and MSCs were cultured together.

Conclusions

Multicellular in vitro models such as the one used here that simulate complex in vivo scenarios can be used to screen other therapeutic compounds or antibacterial biomaterials without the need to use animals.

Iodine-supported implants in prevention and treatment of surgical site infections for compromised hosts: a prospective study

BACKGROUND

Surgical site infection (SSI) is a common complication following orthopedic implantation. We developed an iodine coating for titanium implants to reduce implant-related infections and conducted a prospective clinical study to evaluate the efficacy and potential drawbacks of iodine-supported implants.

PATIENTS AND METHODS

Between July 2008 and July 2017, 653 patients (377 male and 27 female patients; mean age, 48.6) with postoperative infection or a compromised status were treated using iodine-loaded titanium implants. The mean follow-up period was 41.7 months. In 477 patients, iodine-supported implants were used to prevent infection and in 176 patients, to treat active infection (one-stage surgery, 89 patients; two-stage surgery, 87 patients). In the limbs and pelvis, the primary diagnoses included the following: 161 tumors, 92 deformities/shortening, 47 pseudarthrosis, 42 fractures, 32 infected TKA, 25 osteoarthritis, 21 pyogenic arthritis, 20 infected THA, and 6 osteomyelitis. In the spinal cases, there were 136 cases of tumors, 36 cases of pyogenic spondylitis, and 35 cases of degeneration. Five modes of implant failure were identified and classified as follows: soft tissue failure (type 1), aseptic loosening (type 2), structural failure (type 3), infection (type 4), and tumor progression (type 5).

RESULTS

The overall failure rate in our series was 26.3% (172/653). There were 101 mechanical failures, including 22 type 1, 20 type 2, and 59 type 3 failures. Non-mechanical causes accounted for 71 failures, including 45 type 4 and 26 type 5 failures. The overall incidence of infections was 6.8%. The mean time to the onset of infection after implantation was 9.1 months. The overall infection rate was 3.7% in the prevention cases and 15.3% in the treatment cases. There was no difference between one-stage replacement (14.6%) and two-stage replacement (16.0%). There were 11 cases of treatment for SSI of spine surgery, and the re-infection rate was 0% using iodine-coated instruments.

CONCLUSIONS

The five modes of failure of the iodine-supported implant were satisfactory compared with previous reports. In particular, because the infection rate of iodine-coated implants used for compromised hosts is low compared with other methods, postoperative infection is more easily controlled. It can be considered highly effective for spinal infections that require one-stage revision surgery.

LEVEL OF EVIDENCE IV

Trial registration Prospective, Observation study.

Cytotoxicity and Antibiofilm Activity of Silver-Polypropylene Nanocomposites

The development of biocompatible nanomaterials that interface with human skin and tissue is critical for advancing prosthetics and other therapeutic medical needs. In this perspective, the development of nanoparticles with cytotoxicity and antibiofilm properties and biocompatibility characteristics are important. Metallic silver (Ag) exhibits good biocompatibility, but it is often challenging to integrate it into a nanocomposite without compromising its antibiofilm properties for optimal applications. In this study, new polymer nanocomposites (PNCs) with ultra-low filling content (0.0023-0.046 wt%) of Ag nanoplates were manufactured and tested. The cytotoxicity and antibiofilm activity of different composites with polypropylene (PP) matrix were examined. At first, PNCs surface were analyzed by means of AFM (atomic force microscopy) with phase contrast evaluation and FTIR (Fourier-transform infrared spectroscopy) to study the Ag nanoplates distribution. Subsequently, the cytotoxicity and growth properties of biofilms were assessed by MTT assay protocol and detection of nitric oxide radicals. Antibacterial and antibiofilm activities were measured against Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (K. pneumoniae). The PNCs with silver exhibited antibiofilm activity although they did not inhibit regular planktonic bacterial growth. Moreover, the PNCs were not cytotoxic to mammalian cells and did not induce significant immune response. These features reveal the potential of the PNCs developed in this study for usage in fabrication of prosthetics and other smart structures for biomedical applications.

Can Ag+ Permeate through a Potassium Ion Channel? A Bottom-Up Approach by Infrared Spectroscopy of the Ag+ Complex with the Partial Peptide of a Selectivity Filter

Silver and silver ions have a long history of antimicrobial activity and medical applications. Nevertheless, the activity of Ag⁺ against bacteria, how it enters a cell, has not yet been established. The K⁺ channel, a membrane protein, is a possible route. The addition of a channel inhibitor (4-aminopyridine) to modulate the Ag⁺ uptake could support this view. However, the inhibitor enhances the uptake of Ag⁺, the opposite result. We have applied cold ion trap infrared laser spectroscopy to complexes of Ag⁺ and Ac-Tyr-NHMe (a model for GYG) which is a portion of the selectivity filter in the K⁺ channel to consider the question of permeation. With support from quantum chemical calculations, we have determined the stable conformations of the complex. The conformations strongly suggest that Ag⁺ would not readily permeate the K⁺ channel. The mechanism of the unexpected enhancement by the inhibitor is discussed.

Nanosilver/DCOIT-containing surface coating effectively and constantly reduces microbial load in emergency room surfaces

BACKGROUND

Colonization of near-patient surfaces in hospitals plays an important role as a source of healthcare-associated infections. Routine disinfection methods only result in short-term elimination of pathogens.

AIM

To investigate the efficiency of a newly developed antimicrobial coating containing nanosilver in long-term reduction of bacterial burden in hospital surfaces to close the gap between routine disinfection cycles.

METHODS

In this prospective, double-blinded trial, frequently touched surfaces of a routinely used treatment room in an emergency unit of a level-I hospital were treated with a surface coating (nanosilver/DCOIT-coated surface, NCS) containing nanosilver particles and another organic biocidal agent (4,5-dichloro-2-octyl-4-isothiazolin-3-one, DCOIT), whereas surfaces of another room were treated with a coating missing both the nanosilver- and DCOIT-containing ingredient and served as control. Bacterial contamination of the surfaces was examined using contact plates and liquid-based swabs daily for a total trial duration of 90 days. After incubation, total microbial counts and species were assessed.

FINDINGS

In a total of 2880 antimicrobial samples, a significant reduction of the overall bacterial load was observed in the NCS room (median: 0.31 cfu/cm²; interquartile range: 0.00-1.13) compared with the control coated surfaces (0.69 cfu/cm²; 0.06-2.00; P < 0.001). The nanosilver- and DCOIT-containing surface coating reduced the relative risk of a critical bacterial load (defined as >5 cfu/cm²) by 60% (odds ratio 0.38, P < 0.001). No significant difference in species distribution was detected between NCS and control group.

CONCLUSION

Nanosilver-/DCOIT-containing surface coating has shown efficiency for sustainable reduction of bacterial load of frequently touched surfaces in a clinical setting.

Implant surface modifications as a prevention method for periprosthetic joint infection caused by Staphylococcus aureus: a systematic review and meta-analysis

Abstract. Background: Periprosthetic joint infection is the most common infection due to joint replacement. It has been reported that, over a 5-year time span, 3.7 % of cases occurred annually. This statistic has increased to 6.86 % over 16 years. Thus, an effective method is required to reduce these complications. Several strategies such as coating methods with various materials, such as antibiotics, silver, and iodine, have been reported. However, the best preventive strategy is still undetermined. Therefore, this systematic review aims to evaluate the outcome of coating methods on joint arthroplasty as a treatment or preventive management for infection complications. Methods: Eligible articles were systematically searched from multiple electronic databases (PubMed, Cochrane library, and ScienceDirect) up to 2 June 2022. Based on the criterion inclusion, eight articles were selected for this study. The Newcastle–Ottawa scale (NOS) was used to assess the quality of the study, and the meta-analysis test was conducted with Review Manager 5.4. Results: The quality of the articles in this study is in the range of moderate to good. It was found that the application of modified antibiotic coatings significantly reduced the occurrence of periprosthetic joint infection (PJI) (p 0.03), and silver coating could not significantly (p 0.47) prevent the occurrence of PJI. However, according to the whole aspect of coating modification, the use of antibiotics, silver, and iodine can minimize the occurrence of PJI (p <0.0001). Conclusion: Coating methods using antibiotics are an effective method that could significantly prevent the occurrence of PJI. On the other hand, coating with non-antibiotic materials such as silver could not significantly prevent the incidence of PJI.

Individual and commercially available antimicrobial coatings for intramedullary nails for the treatment of infected long bone non-unions - a systematic review

The treatment of infected non-unions of the femur and the tibia remains difficult and requires control of the infection and successful bone healing. Antimicrobial coating of intramedullary nails promises both infection control and stabilization for subsequent bone healing. Both results for custom-made and commercially available antimicrobial coating for intramedullary nails have been published in the past mainly consisting of retrospective case series. The purpose of this work is to review the published literature on techniques and clinical outcome of antimicrobial coatings for intramedullary nails for the treatment of infected long bone non-unions. A systematic literature research in Medline, PubMed, Embase and Cochrane Library was performed in accordance to the PRISMA guidelines. Articles reporting on antimicrobial-coated intramedullary nails for the treatment of infected long bone non-unions were eligible for inclusion. In total, 22 publications were found reporting on 506 infected non-unions of the tibia and femur treated with an antimicrobial-coated nail. Most of them consisted of retrospective case series (72.7%). 469 and 37 patients were treated with an individual antibiotic-loaded PMMA-coating and commercially available gentamicin-coating for intramedullary nails, respectively. The overall infection eradication rate was 90.0% (range 68.7-100%) and the bone consolidation rate was 85.5% (range 57.9-100%). Coating specific side effects were not reported. In conclusion, the treatment of infected long bone non-unions with antimicrobial-coated nails is associated with a high infection control and bone consolidation rate and seems to be a reasonable treatment options with minimal side effects. However, scientific quality of the publications is low and randomized controlled trials are needed.

Treatment of a Gustilo-Anderson type II open tibia shaft fracture with an ultrathin silver plasma-coated plate: A case report

The treatment of open tibia fractures with plate fixation bears a high risk for the development of a fracture-related infection. Here we present a case of an 80-year-old female with a Gustilo-Anderson type II open distal tibial shaft fracture with an indwelling knee prosthesis. The case was successfully treated with a 2-stage procedure with initial external fixation and subsequent open reduction and plate fixation with a custom-made ultrathin silver plasma-coated locking plate. Plate fixation was the preferred method as the indwelling knee prosthesis prevented the use of a standard intramedullary tibia nail. The fracture healed uneventfully without any signs of infections and the patient achieved full weight-bearing with a normal gait and without any pain after three months. Radiographical full bridging of the initial fracture area was seen after 5 months without any signs of infection or fracture healing disturbances. After an overall follow-up of 12 months, there were no signs of silver associated or other adverse events. Thus, ultrathin silver plasma coating seems to be helpful in the treatment open fractures with plate fixation to prevent fracture-related infections.

Surgical Site Infection after Bone Tumor Surgery: Risk Factors and New Preventive Techniques

The management of malignant bone tumors requires multidisciplinary interventions including chemotherapy, radiation therapy, and surgical tumor resection and reconstruction. Surgical site infection (SSI) is a serious complication in the treatment of malignant bone tumors. Compared to other orthopedic surgeries, the surgical treatment of malignant bone tumors is associated with higher rates of SSIs. In patients with SSIs, additional surgeries, long-term administrations of antibiotics, extended hospital stays, and the postponement of scheduled adjuvant treatments are required. Therefore, SSI may adversely affect functional and oncological outcomes. To improve surgical outcomes in patients with malignant bone tumors, preoperative risk assessments for SSIs, new preventive techniques against SSIs, and the optimal use of prophylactic antibiotics are often required. Previous reports have demonstrated that age, tumor site (pelvis and tibia), extended operative time, implant use, body mass index, leukocytopenia, and reconstruction procedures are associated with an increased risk for SSIs. Furthermore, prophylactic techniques, such as silver and iodine coatings on implants, have been developed and proven to be efficacious and safe in clinical studies. In this review, predictive factors of SSIs and new prophylactic techniques are discussed.

Cell Toxicity Study of Antiseptic Solutions Containing Povidone–Iodine and Hydrogen Peroxide

The increasing incidence of periprosthetic joint infections (PJIs) has led to a growing interest in developing strategies to prevent and treat this severe complication. The surgical site’s application of antiseptic solutions to eliminate contaminating bacteria and eradicate the bacterial biofilm has been increasing over time. Even though it has been proven that combining antimicrobials could enhance their activities and help overcome acquired microbial resistance related to the topical use of antibiotics, the toxicity of integrated solutions is not well described. This study aimed to evaluate the cytotoxicity of solutions containing povidone–iodine (PI) and hydrogen peroxide (H2O2), alone or in combination, after 1.3 and 5 min of exposure. Chondrocytes, tenocytes, and fibroblast-like synoviocytes were used for cytotoxicity analysis. Trypan blue stain (0.4% in PBS) was applied to evaluate the dead cells. All solutions tested showed a progressive increase in toxicity as exposure time increased except for PI at 0.3%, which exhibited the lowest toxicity. The combined solutions reported a reduced cellular killing at 3 and 5 min than H2O2 at equal concentrations, similar results to PI solutions.

Combined Orthoplastic Approach in Fracture-Related Infections of the Distal Tibia

This series reports on the treatment of distal tibia (DT) fracture-related infections (FRI) with a combined orthoplastic approach. Thirteen patients were included. In eight patients with extensive bone involvement and in those with a non-healed fracture, the DT was resected (“staged approach”). In five cases, the DT was preserved (“single-stage approach”). A wide debridement was performed, and the cavity was filled with antibiotic-loaded PerOssal beads. All patients had a soft-tissue defect covered by a free vascularized flap (anterolateral thigh perforator flap in eight cases, latissimus dorsi flap in five). At the final follow-up (mean 25 months, range, 13–37), no infection recurrence was observed. In one patient, the persistence of infection was observed, and the patient underwent a repeated debridement. In two cases, a voluminous hematoma was observed. However, none of these complications impacted the final outcome. The successful treatment of FRI depends on proper debridement and obliteration of dead spaces with a flap. Therefore, when dealing with DT FRI, debridement of infected bone and soft tissues must be as radical as required, with no fear of the need for massive reconstructions.

Long-term changes in serum silver concentrations after extremity reconstruction with silver-coated megaprostheses

Silver-coated megaprostheses are considered to reduce infection rate following reconstruction of bone defects in tumour surgery or revision arthroplasty. However, little is known about systemic silver exposure and possible side effects. The aim of this study was to analyse serum silver concentrations in patients with silver-coated megaprostheses over a prolonged time period. Between 2004 and 2016, 46 patients (52.2% female, mean age at surgery 47.1 ± 24.2 years) received silver-coated megaprostheses for septic (n = 26) or oncological (n = 17; main implant since 2013) indications, or aseptic loosening (n = 3). Blood was drawn from all patients within the first few days following surgery (without silver ion levels) and thereafter every 6 months at the outpatient department (with silver ion levels). Inductively coupled plasma mass spectrometry was used to determine silver ion levels. Median follow-up was 47.3 months (IQR: 16.1–78.9). Overall, 29 revision surgeries became necessary in 20 patients, equivalent to a cumulative complication rate of 63.0%. Revisions were most commonly for periprosthetic joint infections (PJIs, n = 12) and instability/soft tissue problems (n = 10). Revision-free implant survival was 81.4%, 42.3% and 35.2% at one, 5 and 10 years. Incidence of local argyria was 8.7% (n = 4). Silver ion levels at two or more consecutive time points during follow-up were available for 26 patients. An increment of silver levels within the first months (“run-in”) was observed, followed by an unspecific undulating course. Median initial and latest follow-up (median, 49.5 months) serum silver ion levels were 16.0 ppb (IQR: 9.1–29.1) and 7.4 ppb (IQR: 2.7–14.1), respectively. According to the multivariate mixed linear random-effects model, development of PJI was associated with significantly higher silver ion levels over time (p = 0.002), irrespective of time from surgery (p = 0.274). In the current series, a cumulative complication rate of 63.0% was observed for patients receiving silver-coated megaprostheses for septic of oncological indications. An overall unspecific course of silver ion concentration was present. Development of PJI was significantly associated with increased silver ion levels over time. Yet, no systemic complication associated to high silver levels occurred. It can be concluded that silver-coated implants constitute a safe solution for megaprosthetic reconstruction, but monitoring of silver concentrations is recommended.

Is Silver the New Gold? A Systematic Review of the Preclinical Evidence of Its Use in Bone Substitutes as Antiseptic

Antibiotic-laden bone substitutes represent a viable option in the treatment of bone and joint infections with bone defects. In particular, the addition of silver ions or silver nanoparticles to bone substitutes to achieve local antiseptic activity could represent a further contribution, also helping to prevent bacterial resistance to antibiotics. An in-depth search of the main scientific databases was performed regarding the use of silver compounds for bone substitution. The available evidence is still limited to the preclinical level: 22 laboratory studies, 2 animal models, and 3 studies, with both in vitro and in vivo analysis, were found on the topic. Numerous biomaterials have been evaluated. In vitro studies confirmed that silver in bone substitutes retains the antibacterial activity already demonstrated in coatings materials. Cytotoxicity was generally found to be low and only related to silver concentrations higher than those sufficient to achieve antibacterial activity. Instead, there are only a few in vivo studies, which appear to confirm antibacterial efficacy, although there is insufficient evidence on the pharmacokinetics and safety profile of the compounds investigated. In conclusion, research on bone substitutes doped with silver is in its early stages, but the preliminary findings seem promising.

Antibacterial Designs for Implantable Medical Devices: Evolutions and Challenges

The uses of implantable medical devices are safer and more common since sterilization methods and techniques were established a century ago; however, device-associated infections (DAIs) are still frequent and becoming a leading complication as the number of medical device implantations keeps increasing. This urges the world to develop instructive prevention and treatment strategies for DAIs, boosting the studies on the design of antibacterial surfaces. Every year, studies associated with DAIs yield thousands of publications, which here are categorized into four groups, i.e., antibacterial surfaces with long-term efficacy, cell-selective capability, tailored responsiveness, and immune-instructive actions. These innovations are promising in advancing the solution to DAIs; whereas most of these are normally quite preliminary “proof of concept” studies lacking exact clinical scopes. To help identify the flaws of our current antibacterial designs, clinical features of DAIs are highlighted. These include unpredictable onset, site-specific incidence, and possibly involving multiple and resistant pathogenic strains. The key point we delivered is antibacterial designs should meet the specific requirements of the primary functions defined by the “intended use” of an implantable medical device. This review intends to help comprehend the complex relationship between the device, pathogens, and the host, and figure out future directions for improving the quality of antibacterial designs and promoting clinical translations.

Treatment of an infected nonunion with additional fresh fracture of the femur with a silver-coated intramedullary nail: A case report

Infected non-unions of the femur can be difficult to treat with a high risk of reinfection and persisting nonunion. Here we demonstrate a case of a 66-year-old female with a chronic infected nonunion of the left femur. The patient fell during temporary external fixation of the infected nonunion and sustained an additional proximal femur shaft fracture. The case was successfully managed with a low-amount silver coating of a long proximal femur nail and an additional augmentation locking plate along with local and systemic antibiotics. After a follow-up of 26 months, both the fracture and also the infected nonunion healed completely without recurrence of infection and without any signs of adverse events in response to the silver coating. In conclusion, silver coated fracture fixation devices can be helpful in difficult to treat infection cases without adverse events.

Improving bactericidal performance of implant composite coatings by synergism between Melittin and tetracycline

Methicillin resistance Staphylococcus aureus bacteria (MRSA) are serious hazards of bone implants. The present study was aimed to use the potential synergistic effects of Melittin and tetracycline to prevent MRSA associated bone implant infection. Chitosan/bioactive glass nanoparticles/tetracycline composite coatings were deposited on hydrothermally etched titanium substrate. Melittin was then coated on composite coatings by drop casting method. The surfaces were analyzed by FTIR, XRD, and SEM instruments. Tetracycline in coatings revealed multifunctional behaviors include bone regeneration and antibacterial activity. Releasing ALP enzyme from MC3T3 cells increased by tetracycline, so it is suitable candidate as osteoinductive and antibacterial agent in orthopedic implants coatings. Melittin increased the proliferation of MC3T3 cells. Composite coatings with combination of tetracycline and Melittin eradicate all MRSA bacteria, while coatings with one of them could no t eradicate all of the bacteria. In conclusion, chitosan/bioactive glass/tetracycline/Melittin coating can be suggested as a multifunctional bone implant coating because of its osteogenic and promising antibacterial activity. Graphical abstract.

Development of Silver-Containing Hydroxyapatite-Coated Antimicrobial Implants for Orthopaedic and Spinal Surgery

The prevention of surgical site infections is directly related to the minimization of surgical invasiveness, and is in line with the concept of minimally invasive spine therapy (MIST). In recent years, the incidence of postoperative infections has been increasing due to the increased use of spinal implant surgery in patients at high risk of infection, including the elderly and easily infected hosts, the limitations of poor bone marrow transfer of antibiotics, and the potential for contamination of surgical gloves and instruments. Thus, the development of antimicrobial implants in orthopedic and spinal surgery is becoming more and more popular, and implants with proven antimicrobial, safety, and osteoconductive properties (i.e., silver, iodine, antibiotics) in vitro, in vivo, and in clinical trials have become available for clinical use. We have developed silver-containing hydroxyapatite (Ag-HA)-coated implants to prevent post-operative infection, and increase bone fusion capacity, and have successfully commercialized antibacterial implants for hip prostheses and spinal interbody cages. This narrative review overviews the present status of available surface coating technologies and materials; describes how the antimicrobial, safety, and biocompatibility (osteoconductivity) of Ag-HA-coated implants have been demonstrated for commercialization; and reviews the clinical use of antimicrobial implants in orthopedic and spinal surgery, including Ag-HA-coated implants that we have developed.

Bone Bricks: The Effect of Architecture and Material Composition on the Mechanical and Biological Performance of Bone Scaffolds

Large bone loss injuries require high-performance scaffolds with an architecture and material composition resembling native bone. However, most bone scaffold studies focus on three-dimensional (3D) structures with simple rectangular or circular geometries and uniform pores, not able to recapitulate the geometric characteristics of the native tissue. This paper addresses this limitation by proposing novel anatomically designed scaffolds (bone bricks) with nonuniform pore dimensions (pore size gradients) designed based on new lay-dawn pattern strategies. The gradient design allows one to tailor the properties of the bricks and together with the incorporation of ceramic materials allows one to obtain structures with high mechanical properties (higher than reported in the literature for the same material composition) and improved biological characteristics.

Mid-term implant survival, functional and radiological results and mechanical complications of mega-prosthetic reconstruction around the knee with the PENTA® system

AIM

Mega-prosthetic reconstruction is the most common treatment method for massive osteoarticular defects caused by tumor resection around the knee. The new implant is a highly modular rotational-hinged megaprosthesis system with a distinct pentagonal stem geometry and variable implantation options. The aim of this study is to present the mid-term implant survival characteristics, functional and radiological results and mechanical complication profile of the new megaprosthesis.

METHODS

One hundred and one mega-prosthetic knee reconstruction procedures in 90 patients (M/F: 51/39) utilizing the new implant system were retrospectively analyzed. In 68 patients, the megaprosthesis was used for primary reconstruction following tumor resection while it was used for revision of other implants in 22. The mean age was 28.5 (7-66) years and the mean follow-up was 59.2 (24-124) months. The most common primary pathology was osteosarcoma with 63-70% patients, the most common anatomical site of involvement was the distal femur with 56-62% patients.

RESULTS

Henderson Type 2 failure (aseptic loosening) was seen in only 2-2.2% patients while Type 3 (structural failure) was seen in 29-32.2% Although the 5-year anchorage survival rate was 94.3%, overall mechanical implant survival was 76.1% at 5 years due to a relatively high failure rate in the first-generation hinge mechanism of the implant. The 5-year hinge survival rate demonstrated a significant improvement rate from 61.7% to 87.2% between the first and second generations of the implant (p = 0.027). The mean MSTS score was 24 out of 30 (14-29). The mean cumulative ISOLS radiographic score for index megaprosthesis operations was 19.7 (12-24), which corresponded to excellent outcome.

CONCLUSION

The new megaprosthesis system is a reliable choice for the reconstruction of tumor-related massive osteoarticular defects around the knee. Although long-term follow-up is necessary for a definitive evaluation of the implant's survival characteristics, midterm follow-up yields exceptional anchorage properties related to pentagonal stem geometry with very good functional outcomes.

One-Stage Hip Revision Arthroplasty Using Megaprosthesis in Severe Bone Loss of The Proximal Femur Due to Radiological Diffuse Osteomyelitis

Managing substantial proximal and/or distal femoral bone defects is one of the biggest challenges in chronic hip periprosthetic joint infection. Most authors use two-stage arthroplasty with a temporary antibiotic-loaded cement spacer for the management of these patients. In this study, we show our experience with one-stage exchange arthroplasty in managing severe bone defects due to radiological-extensive proximal femoral osteomyelitis. Two patients were included in the study. They showed radiological-extensive proximal femoral osteomyelitis, and they were treated with one-stage exchange arthroplasty using megaprosthesis. Diffuse osteomyelitis was confirmed in both cases; in one case, the histology was compatible with osteomyelitis, and the other case had a positive culture identified in a bone sample. At a minimum of a four-year follow-up, the patients did not reveal any clinical, radiological or laboratory signs of infection. In conclusion, one-stage exchange arthroplasty and megaprosthesis is an option for the treatment of chronic hip periprosthetic joint infection associated with radiological-diffuse proximal femoral osteomyelitis.

Antibacterial approaches in tissue engineering using metal ions and nanoparticles: From mechanisms to applications

Bacterial infection of implanted scaffolds may have fatal consequences and, in combination with the emergence of multidrug bacterial resistance, the development of advanced antibacterial biomaterials and constructs is of great interest. Since decades ago, metals and their ions had been used to minimize bacterial infection risk and, more recently, metal-based nanomaterials, with improved antimicrobial properties, have been advocated as a novel and tunable alternative. A comprehensive review is provided on how metal ions and ion nanoparticles have the potential to decrease or eliminate unwanted bacteria. Antibacterial mechanisms such as oxidative stress induction, ion release and disruption of biomolecules are currently well accepted. However, the exact antimicrobial mechanisms of the discussed metal compounds remain poorly understood. The combination of different metal ions and surface decorations of nanoparticles will lead to synergistic effects and improved microbial killing, and allow to mitigate potential side effects to the host. Starting with a general overview of antibacterial mechanisms, we subsequently focus on specific metal ions such as silver, zinc, copper, iron and gold, and outline their distinct modes of action. Finally, we discuss the use of these metal ions and nanoparticles in tissue engineering to prevent implant failure.

Periacetabular reconstruction following limb-salvage surgery for pelvic sarcomas

Limb-salvage surgery for pelvic sarcomas remains one of the most challenging surgical procedures for musculoskeletal oncologists. In the past several decades, various surgical techniques have been developed for periacetabular reconstruction following pelvic tumor resection. These methods include endoprosthetic reconstruction, allograft or autograft reconstruction, arthrodesis, and hip transposition. Each of these procedures has its own advantages and disadvantages, and there is no consensus or gold standard for periacetabular reconstruction. Consequently, this review provides an overview of the clinical outcomes for each of these reconstructive options following pelvic tumor resections. Overall, high complication rates are associated with the use of massive implants/grafts, and deep infection is generally the most common cause of reconstruction failure. Functional outcomes decline with the occurrence of severe complications. Further efforts to avoid complications using innovative techniques, such as antibiotic-laden devices, computer navigation, custom cutting jigs, and reduced use of implants/grafts, are crucial to improve outcomes, especially in patients at a high risk of complications.

A long-term experience with Mutars tumor megaprostheses: analysis of 187 cases

PURPOSE

Modular megaprostheses have widely replaced allografts, as a reconstructive option; however, failures of these devices remain high. Aim of this study was to analyze outcomes, survival of the implants, incidence and types of complications with Mutars modular endoprostheses at long term.

METHODS

Between 2000 and 2019, 187 Mutars prostheses were implanted in two dedicated centers: 72 upper limbs and 115 lower limbs reconstructions. Diagnoses included 107 primary malignant bone or soft tissue tumors, 65 metastases, 8 benign bone tumors and 7 non-oncologic cases. Silver-coated prostheses were used in 118/187 (63%) cases.

RESULTS

At last follow-up, 76.5% of patients had retained their implant. The overall failure rate was 23.5% at a mean of 1.7 years. There were 22 mechanical failures and 22 non-mechanical failures. The overall implant survival to all types of failure was 68% and 52% at 5 and 10 years, respectively. Infection was the most common mode of failure with an incidence of 6.9%. Implant survival to infection was better for silver-coated implants than for standard implants even if with no significant difference (p = 0.56). Functional results were satisfactory in 97% of patients.

CONCLUSIONS

The overall implant survival at long term was satisfactory with Mutars prostheses. The incidence of complications with Mutars prosthesis is in line with the incidence reported in the literature with other types of tumor prosthesis. The most frequent cause of failure was infection with a lower incidence in silver-coated prostheses; silver coating seems to prevent infection in distal femur and proximal tibia. The silver coating seems to be particularly useful in two-stage revisions with a lower incidence of secondary amputation. In higher risk patients, silver-coated prostheses are the preferable choice for the reduction of the reinfection rate. The functional results of Mutars prostheses were excellent or good in most of cases. The current paper is design to enhance the literature on megaprosthesis in tumor surgery, proven that this system is one of the most used all over the word and one of the best performing.

Prevention of abdominal adhesion by a polycaprolactone/phospholipid hybrid film containing quercetin and silver nanoparticles

Aim: To develop quercetin-loaded poly(caprolactone) (PCL)/soybean phosphatidylcholine (PC) films coated with silver (Ag) to prevent the formation of postoperative adhesions (POA). Materials & methods: Films were prepared using the solvent casting method, coated with Ag, and underwent in vitro tests. In vivo studies were conducted employing an animal model of sidewall defect and cecum abrasion. Results: Films showed sustained release behavior of quercetin and Ag. Coating films with Ag improved their antimicrobial activity. In vivo studies confirmed superior antiadhesion properties of films compared with the control groups evaluated by gross observation, histochemical staining and immunohistochemistry analyses. Conclusion: Ag-Q-PCL-PC films are a potential candidate to prevent POA by acting as a sustained release delivery system and physical barrier.

Modular Total Femur Replacement for Staged Total Femur Replacement

As the numbers of arthroplasties performed worldwide increase, so do complications such as prosthetic joint infection. Cases that require a two-stage revision of a total femur replacement in the femur pose an ongoing challenge to the modern orthopedic surgeon. Unlike antibiotic spacers in hip and knee arthroplasty, there lacks a commercially available cement spacer for use in total femur replacements. We describe a novel technique for the intraoperative fabrication of a total femur spacer which uses modular components. As such, our technique is unique as it is modular and, therefore, highly customisable to each individual patient. Individual components can be made by different members of the team simultaneously and then assembled to make the final construct, thereby minimizing operative time. Furthermore, the inherent stability of the spacer allows immediate partial weightbearing and functional rehabilitation while patients are waiting for their second-stage procedure.

In vitro testing of silver-containing spacer in periprosthetic infection management

Deep infection is a serious complication in endoprosthetic surgery. In correlation to the patient local or systemic compromising factors conservative and surgical proceedings has to be evaluated. Systemic antibiotic therapy is the gold standard in infection management. Implanted silver-coated or silver-containing medical devices have been proven to their antimicrobial effectiveness since the 1990s by several investigators. The outcomes showed that long time implantation could cause damaging of the surrounding tissues, especially of adjacent nerves. The aim of our study was to evaluate the release of silver (I) ions from bone cement mixed with either nanosilver particles (AgNPs), different concentrations of silver sulfate (Ag2SO4) or from pure metallic silver strips. Therefore, we choose two methods: the first, called “static model”, was chosen to evaluate the maximal accumulative concentration of silver (I) ions, with the second, called “dynamic model”, we simulated a continuous reduction of the ions. In an additional test design, the different materials were evaluated for their antimicrobial activity using an agar gel diffusion assay. The outcome showed that neither the addition of 1% (w/w) nanosilver nor 0.1% silver sulfate (w/w) to polymethylmethacrylat bone cement has the ability to release silver (I) ions in a bactericidal/antifungal concentration. However, the results also showed that the addition of 0.5% (w/w) and 1% (w/w) silver sulfate (Ag2SO4) to bone cement is an effective amount of silver for use as a temporary spacer.

Biomaterials and technologies in the management of periprosthetic infection after total hip arthroplasty: An updated review

Although total hip arthroplasty (THA) is considered one of the most efficacious procedures for managing various hip conditions, failures due to different mechanisms are still being reported. Periprosthetic joint infection (PJI) is one of the devastating causes of failure and revision of THA. PJI carries a burden on the patient, the surgeon, and the health-care system. The diagnosis and management of PJIs carry many morbidities and increased treatment costs. The development of PJI is multifactorial, including issues related to the patient’s general condition, the surgeon’s efficiency, surgical technique, and the implants used. Recent advances in the area of diagnosis and predicting PJI as well as introducing new technologies and biomaterials update for the prevention and treatment of PJI. Local implant coatings, advancement in the bearing surfaces technologies, and new technologies such as immunotherapy and bacteriophage therapy were introduced and suggested as contemporary PJI eradication solutions. In this review, we aimed at discussing some of the newly introduced materials and technologies for the sake of PJI control.

Recent Advances in Research on Antibacterial Metals and Alloys as Implant Materials

Implants are widely used in orthopedic surgery and are gaining attention of late. However, their use is restricted by implant-associated infections (IAI), which represent one of the most serious and dangerous complications of implant surgeries. Various strategies have been developed to prevent and treat IAI, among which the closest to clinical translation is designing metal materials with antibacterial functions by alloying methods based on existing materials, including titanium, cobalt, tantalum, and biodegradable metals. This review first discusses the complex interaction between bacteria, host cells, and materials in IAI and the mechanisms underlying the antibacterial effects of biomedical metals and alloys. Then, their applications for the prevention and treatment of IAI are highlighted. Finally, new insights into their clinical translation are provided. This review also provides suggestions for further development of antibacterial metals and alloys.

Toward Bactericidal Enhancement of Additively Manufactured Titanium Implants

Implant-associated infections (IAIs) are among the most intractable and costly complications in implant surgery. They can lead to surgery failure, a high economic burden, and a decrease in patient quality of life. This manuscript is devoted to introducing current antimicrobial strategies for additively manufactured (AM) titanium (Ti) implants and fostering a better understanding in order to pave the way for potential modern high-throughput technologies. Most bactericidal strategies rely on implant structure design and surface modification. By means of rational structural design, the performance of AM Ti implants can be improved by maintaining a favorable balance between the mechanical, osteogenic, and antibacterial properties. This subject becomes even more important when working with complex geometries; therefore, it is necessary to select appropriate surface modification techniques, including both topological and chemical modification. Antibacterial active metal and antibiotic coatings are among the most commonly used chemical modifications in AM Ti implants. These surface modifications can successfully inhibit bacterial adhesion and biofilm formation, and bacterial apoptosis, leading to improved antibacterial properties. As a result of certain issues such as drug resistance and cytotoxicity, the development of novel and alternative antimicrobial strategies is urgently required. In this regard, the present review paper provides insights into the enhancement of bactericidal properties in AM Ti implants.

Toward Designing of Anti-infective Hydrogels for Orthopedic Implants: From Lab to Clinic

An alarming increase in implant failure incidence due to microbial colonization on the administered orthopedic implants has become a horrifying threat to replacement surgeries and related health concerns. In essence, microbial adhesion and its subsequent biofilm formation, antibiotic resistance, and the host immune system's deficiency are the main culprits. An advanced class of biomaterials termed anti-infective hydrogel implant coatings are evolving to subdue these complications. On this account, this review provides an insight into the significance of anti-infective hydrogels for preventing orthopedic implant associated infections to improve the bone healing process. We briefly discuss the clinical course of implant failure, with a prime focus on orthopedic implants. We identify the different anti-infective coating strategies and hence several anti-infective agents which could be incorporated in the hydrogel matrix. The fundamental design criteria to be considered while fabricating anti-infective hydrogels for orthopedic implants will be discussed. We highlight the different hydrogel coatings based on the origin of the polymers involved in light of their antimicrobial efficacy. We summarize the relevant patents reported in the prevention of implant infections, including orthopedics. Finally, the challenges concerning the clinical translation of the aforesaid hydrogels are described, and considerable solutions for improved clinical practice and better future prospects are proposed.

Novel Approaches to Combat Medical Device-Associated BioFilms

Biofilms are aggregates formed as a protective survival state by microorganisms to adapt to the environment and can be resistant to antimicrobial agents and host immune responses due to chemical or physical diffusion barriers, modified nutrient environments, suppression of the growth rate within biofilms, and the genetic adaptation of cells within biofilms. With the widespread use of medical devices, medical device-associated biofilms continue to pose a serious threat to human health, and these biofilms have become the most important source of nosocomial infections. However, traditional antimicrobial agents cannot completely eliminate medical device-associated biofilms. New strategies for the treatment of these biofilms and targeting biofilm infections are urgently required. Several novel approaches have been developed and identified as effective and promising treatments. In this review, we briefly summarize the challenges associated with the treatment of medical device-associated biofilm infections and highlight the latest promising approaches aimed at preventing or eradicating these biofilms.

Antibacterial hydrogel coating in joint mega-prosthesis: results of a comparative series

PURPOSE

Joint mega-prosthesis after bone tumors, severe trauma or infection is associated with high rates of post-surgical septic complications. A fast-resorbable antibacterial hydrogel coating (DAC®, Defensive Antibacterial Coating) has previously been shown to be able to significantly reduce surgical site infection in various clinical settings. Aim of the present study was to evaluate the safety and efficacy of the DAC hydrogel coating to prevent early periprosthetic joint infection after joint mega-prosthesis.

METHODS

In this three-centers, case-control study, 43 patients, treated with an antibacterial hydrogel coated mega-prosthesis for oncological (N = 39) or non-oncological conditions (N = 4), were retrospectively compared with 43 matched controls, treated with mega-implants without the coating. Clinical, laboratory and radiographic examinations were performed to evaluate the occurrence of post-surgical infection, complications and adverse events.

RESULTS

At a mean follow-up of 2 years, no evidence of infection or adverse events were observed in the DAC-treated group, compared to six cases of post-surgical infection in the control group.

CONCLUSION

This matched case-control study shows that a fast-resorbable, antibiotic-loaded coating can be safely used to protect joint mega-prosthesis, providing a reduction of early surgical site infections with no side effects. Larger prospective trials with longer follow-ups are warranted to confirm this report.

TRIAL REGISTRATION

RS1229/19 (Regina Elena National Cancer Institute Experimental Registry Number).

Silver-coated megaprosthesis in prevention and treatment of peri-prosthetic infections: a systematic review and meta-analysis about efficacy and toxicity in primary and revision surgery

AIM

Prosthetic joint infection (PJI) is a common complication following orthopedic megaprosthetic implantations (EPR), estimated up to 50%. Silver coatings were introduced in order to reduce the incidence of PJI, by using the antibacterial activity of silver. Three different silver coatings are available: MUTARS^® (Implantcast), Agluna^® (Accentus Medical), PorAg^® (Waldemar Link). The aim of this review is to provide an overview on efficacy and safety of silver-coated EPR both in primary and revision surgery, comparing infection rate according to the type of implant.

METHODS

Through an electronic systematic search, we reviewed the articles concerning silver-coated EPRs. Infection rate, silver-related complications, local and blood concentrations of the silver were evaluated. Meta-analyses were performed to compare results from each study included.

RESULTS

Nineteen studies were included. The overall infection rate in patients with silver-coated implants was 17.6% (133/755). Overall infection rate in primary silver-coated EPR was been 9.2% (44/445), compared to 11.2% (57/507) of non-silver-coated implants. The overall infection rate after revisions was 13.7% (25/183) in patients with silver-coated EPR and 29.2% (47/161) when uncoated EPR were used, revealing a strength statistically significative utility of silver coatings in preventing infections in this group (p: 0.019). Generally, the use of MUTARS^® EPR had produced an almost constant decrease in the incidence of primary PJI but there are few data on the effectiveness in revisions. The results from the use of Agluna^® in both primary and revisions implants are inconstant. Conversely, PorAg^® had proven to be effective both in PJI prevention but, especially, when used in PJI revision settings. Local argyria was reported in 8 out of 357 patients (2.2%), while no systemic complications were described. Local and blood concentrations of silver were always reported very far to the threshold of toxicity, with the lowest concentration found using PorAg^®.

CONCLUSIONS

Silver-coated EPRs are safe and effective in reduction in PJI and re-infection rate, in particular when used in higher risk patients and after two-stage revisions to fight PJI.