New Approaches to the Extraction of Arsenic Species from Soils

Arsenic methylation and microbial communities in paddy soils under alternating anoxic and oxic conditions

Arsenic (As) methylation in soils affects the environmental behavior of As, excessive accumulation of dimethylarsenate (DMA) in rice plants leads to straighthead disease and a serious drop in crop yield. Understanding the mobility and transformation of methylated arsenic in redox-changing paddy fields is crucial for food security. Here, soils including un-arsenic contaminated (N-As), low-arsenic (L-As), medium-arsenic (M-As), and high-arsenic (H-As) soils were incubated under continuous anoxic, continuous oxic, and consecutive anoxic/oxic treatments respectively, to profile arsenic methylating process and microbial species involved in the As cycle. Under anoxic-oxic (A-O) treatment, methylated arsenic was significantly increased once oxygen was introduced into the incubation system. The methylated arsenic concentrations were up to 2-24 times higher than those in anoxic (A), oxic (O), and oxic-anoxic (O-A) treatments, under which arsenic was methylated slightly and then decreased in all four As concentration soils. In fact, the most plentiful arsenite S-adenosylmethionine methyltransferase genes (arsM) contributed to the increase in As methylation. Proteobacteria (40.8%-62.4%), Firmicutes (3.5%-15.7%), and Desulfobacterota (5.3%-13.3%) were the major microorganisms related to this process. These microbial increased markedly and played more important roles after oxygen was introduced, indicating that they were potential keystone microbial groups for As methylation in the alternating anoxic (flooding) and oxic (drainage) environment. The novel findings provided new insights into the reoxidation-driven arsenic methylation processes and the model could be used for further risk estimation in periodically flooded paddy fields.

Electrochemical Sensors for Heavy Metal Ion Detection in Aqueous Medium: A Systematic Review

Heavy metal ions (HMIs) are very harmful to the ecosystem when they are present in excess of the recommended limits. They are carcinogenic in nature and can cause serious health issues. So, it is important to detect the metal ions quickly and accurately. The metal ions arsenic (As3+), cadmium (Cd2+), chromium (Cr3+), lead (Pb2+), and mercury (Hg2+) are considered to be very toxic among other metal ions. Standard analytical methods like atomic absorption spectroscopy, atomic fluorescence spectroscopy, and X-ray fluorescence spectroscopy are used to detect HMIs. But these methods necessitate highly technical equipment and lengthy procedures with skilled personnel. So, electrochemical sensing methods are considered to be more advantageous because of their quick analysis with precision and simplicity to operate. They can detect a wide range of heavy metals providing real-time monitoring and are cost-effective and enable multiparametric detection. Various sensing applications necessitate severe regulation regarding the modification of electrode surfaces. Numerous nanomaterials such as graphene, carbon nanotubes, and metal nanoparticles have been extensively explored as interface materials in electrode modifiers. These nanoparticles offer excellent electrical conductivity, distinctive catalytic properties, and high surface area resulting in enhanced electrochemical performance. This review examines different HMI detection methods in an aqueous medium by an electrochemical sensing approach and studies the recent developments in interface materials for altering the electrodes.

Active microbial arsenic methylation in saline-alkaline paddy soil

Seawater rice has been cultivated to ensure food security. The salt-tolerant rice strains are resistant to saline and alkali but may be vulnerable to elevated arsenic (As) near coastal regions. Herein, the saline-alkaline paddy soil was incubated with natural irrigation river for three months to explore the mobility and transformation of As. The incubation results showed that 65 ± 1.2 % solid-bound As(V) was reduced to As(III) within two weeks with the release of As(III) to porewater. The dissolved As(III) was methylated after two weeks, resulting in dimethyl arsenate (DMA) as the dominant As species (87 %-100 %). The elevated As methylation was attributed to the most abundant arsenite methyltransferase gene (arsM) (4.1-10.4 × 10⁷/g dry soil), over three orders of magnitude higher than As redox-related genes. The analysis of arsM operational taxonomic units (OTUs) suggested the highest sequence similarity to Proteobacteria (25.7-39.5 %), Actinobacteria (24.9-30.5 %), Gemmatimonadetes (7.5-11.9 %), Basidiomycota (5.1-12.5 %), and Chloroflexi (4.1-8.7 %). Specifically, Chloroflexi and Actinobacteria are salt-tolerant bacteria, probably responsible for As methylation. The As in grain was within a safe regulatory level, and the dominance of methylated As in porewater did not enhance its accumulation in rice grains.

Stimulated leaching of metalloids along 3D-printed fractured rock vadose zone

Fractured rock aquifers are susceptible to contamination, with metal(loid)s rapidly migrating from poorly developed overburden to the fractured rock vadose zone and thus into groundwater. Compared to typical porous aquifers, retention effects within the rock matrix are small, and rapid advection along fractures leads to a higher risk of groundwater contamination. However, the highly complex anisotropic pathways of natural fractures hinder research in this field. To construct reproducible fractures, this study used 3D printing following Computed X-ray Microtomography (μCT) scans of a fractured rock collected in a natural limestone aquifer. Stimulated metalloid release was observed in the fractured rock during column leaching, and the leachate concentrations of arsenic (As) and antimony (Sb) increased by up to 17.5 and 36.4 times, respectively, compared with the porous vadose zone. Fluctuations in fracture metalloid release patterns in dissolved and adsorbed phases were attributed to retention and filtration effects induced by soil particles within fractures. Geophysical properties of the porous overburden, especially the aggregation characteristics, greatly affected the non-equilibrium leaching behavior of As, but had a limited effect on the near-equilibrium leaching of Sb, which was explored by modifying the surficial soil layer with either montmorillonite clay or charcoal. The results of this study provide a novel method and useful information for modeling and risk assessment of fractured rock aquifers.

Speciation of Arsenic(III) and Arsenic(V) in Plant-Based Drinks

Recently, food products based only on plants have become increasingly popular and are often found on store shelves. It is a specific market response to the growing demand for, and interest in, plant foods. Cow's milk has also gained its counterpart in the form of plant-based beverages, based on cereals, nuts or legumes. The emergence of an increasingly wide range of plant-based food products has also led to increased research on safe plant food consumption. This study was conducted to quantify total arsenic content and its species (arsenic(III) and (V)) in samples of plant-based beverages purchased at Polish markets. Speciation analysis of arsenic was performed by high-performance liquid chromatography combined with inductively coupled plasma mass spectrometry. The presented study was conducted on six selected plant-based beverages, including almond, millet, soybean, rice, coconut and oat. An analysis using size exclusion chromatography was performed. In order to initially visualize the content of the observed elements and the particle size of the compounds in which they occur, at first the samples were subjected to the size-exclusion chromatography. Speciation analysis of arsenic was carried out using anion-exchange liquid chromatography, combined with inductively coupled plasma mass spectrometry. The presented method was validated with certified reference material (CRM rice flour).

Assessment and validation of ICP-MS and IC-ICP-MS methods for the determination of total, extracted and speciated arsenic. Application to samples from a soil-rice system at varying the irrigation method

Food is the major route of arsenic (As) intake for humans, and rice is the staple food for more than half of the world's population. Unfortunately, rice bioaccumulates large amounts of As from the paddy field, and the toxicity of this element in the kernel is closely linked to its chemical form. Therefore, it is of the utmost importance to have access to an integrated set of analytical methods, capable of measuring the concentration of As in its various chemical forms in soil and rice. Hence, the principal aim of this study was to assess and validate a group of inductively coupled plasma - mass spectrometry (ICP-MS) and IC-ICP-MS (IC, Ionic Chromatography) methods designed to measure the amount of the total or extracted As and its main chemical species (As(III), As(V), monomethylarsonic acid, MMA, and dimethylarsinic acid, DMA) in flours of rice grain and in soils. Great attention has been given to the assessment and the optimization of extraction methods of As species from these matrices. No appreciable interconversion among As species has been observed using an aqueous solution 1 mol dm^-3 of phosphoric acid and 0.5 mol dm^-3 of L (+)-ascorbic acid for the extraction from soils, and an aqueous solution 0.2% (w/v) of nitric acid for the extraction from rice flour. Validation has been successfully accomplished in terms of limit of detection, limit of quantification, linearity and accuracy. In addition to many certified reference materials, these methods have been tested on real samples of soils and rice grains of the Aleramo genotype obtained through traditional or intermittent irrigation methods. Data obtained revealed the critical role of the intermittent irrigation methods in determining the nature and the amount of the As chemical species in rice grains as well as in soils. As(V) is the only species found in soil irrigated by sprinkling, while the most toxic As(III) dominates in soil irrigated by continuous flooding. On the other hand, the most abundant species found in continuously flooded Aleramo rice grains are As(III) and - mostly - DMA, whereas As(V), less toxic than As(III), represents 60% of the total inorganic compounds measured in sprinkler-irrigated rice. Lastly, the total amount of As measured in this rice is 3.8% of that measured in rice irrigated by continuous flooding.

Microbes drive changes in arsenic species distribution during the landfill process

Landfills are considered an anthropogenic source of arsenic (As). The As species mediated by microbes in landfills vary significantly in toxicity. Based on random matrix theory, 16S rRNA genes were used to construct four microbial networks associated with different stages over 12 years of landfill ages. The results indicated that network size and microbial structure varied with landfill age. According to the network scores, about 208 taxa were identified as putative keystones for the whole landfill; the majority of them were Firmicutes, which accounted for 66.8% of all specialists. Random Forest analysis was performed to predict the keystone taxa most responsible for As species distribution under different landfill conditions; 17, 10 and 14 keystone taxa were identified as drivers affecting As species distribution at early, middle, and later landfill stages, respectively.

Mercury and arsenic mobility in resuspended contaminated estuarine sediments (Asturias, Spain): A laboratory-based study

Estuarine sediments must be dredged to allow for navigation, and where these sediments are placed after dredging depends upon guidelines based only on the total concentration of contaminants. However, resuspension events could seriously affect the mobility and speciation of contaminants, including potentially toxic trace elements stored in sediments. The effects of resuspension on the cycling of mercury (Hg) and arsenic (As) between the sediment and water column was investigated in a mesocosm study. Four experiments were conducted in three estuaries in northern Spain based on samples collected from sites which have been impacted by decommissioned Hg and As mines and periodically subjected to dredging activities. Designed to mimic the resuspension of particles, each of the experiments revealed that the release of Hg and As species does not only depend on the total concentration in the sediments (16.3-50.9 mg kg^-1, for As and 0.52-5.01 mg kg^-1 for Hg). The contribution from porewaters and the subsequent reductive dissolution and/or desorption appear to be the main processes responsible for the abrupt increase in dissolved Hg and As species (maximum release of 427% and 125%, respectively). In some cases, As and Hg continued to remain at high concentrations in the water column even after the experiments were completed, thus testifying to their critical persistence in the dissolved form. Conversely, at the other sites, the restoration of pre-resuspension conditions was observed only a few hours after resuspension, mainly due to the role of Fe oxy-hydroxides which provides suitable surfaces for adsorption and/or co-precipitation involving dissolved Hg (maximum removal of -58%) and As (maximum removal of -25%) species. The results of this research could be helpful to take appropriate decisions regarding dredging especially at the Nalòn estuary, where the release of dissolved As(V) and MeHg appeared to be favoured by sediment resuspension.

Selective speciation of inorganic arsenic in water using nanocomposite based solid-phase extraction followed by inductively coupled plasma-mass spectrometry detection

The multi-walled carbon nanotubes-branched polyethyleneimine (MWCNTs-BPEI) adsorbent composite material was employed to separate and pre-concentrate As(V) in water samples. The characterization of MWCNTs-BPEI by X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy and Raman spectroscopy showed successful modification of the composite. The MWCNTs-BPEI composite exhibited selective retention of As(V) in the presence of As(III) in water samples of pH 7 using 40 mg of composite as adsorbent. The pre-concentrated As(V) was quantified using inductively coupled plasma-mass spectrometry (ICP-MS). A limit of detection (LOD) of 0.0537 µg L^-1 and limit of quantification (LOQ) of 0.179 µg L^-1 were achieved along with pre-concentration factor of 23.3. A percentage recovery of 81.0% confirm the accuracy of the method. The As(V) concentrations in water were in the range of 0.0612-3.65 µg L^-1. The As(V) concentrations determined using solid-phase extraction (SPE) procedure were in good agreement with the concentrations obtained using high performance liquid chromatography hyphenated to inductively coupled mass-mass spectrometry (HPLC hyphenated to ICP-MS).

Achieving 100% Efficient Postcolumn Hydride Generation for As Speciation Analysis by Atomic Fluorescence Spectrometry

An experimental setup consisting of a flow injection hydride generator coupled to an atomic fluorescence spectrometer was optimized in order to generate arsanes from tri- and pentavalent inorganic arsenic species (iAs(III), iAs(V)), monomethylarsonic acid (MAs(V)), and dimethylarsinic acid (DMAs(V)) with 100% efficiency with the use of only HCl and NaBH4 as the reagents. The optimal concentration of HCl was 2 mol L(-1); the optimal concentration of NaBH4 was 2.5% (m/v), and the volume of the reaction coil was 8.9 mL. To prevent excessive signal noise due to fluctuations of hydride supply to an atomizer, a new design of a gas-liquid separator was implemented. The optimized experimental setup was subsequently interfaced to HPLC and employed for speciation analysis of arsenic. Two chromatography columns were tested: (i) ion-pair chromatography and (ii) ion exchange chromatography. The latter offered much better results for human urine samples without a need for sample dilution. Due to the equal hydride generation efficiency (and thus the sensitivities) of all As species, a single species standardization by DMAs(V) standard was feasible. The limits of detection for iAs(III), iAs(V), MAs(V), and DMAs(V) were 40, 97, 57, and 55 pg mL(-1), respectively. Accuracy of the method was tested by the analysis of the standard reference material (human urine NIST 2669), and the method was also verified by the comparative analyses of human urine samples collected from five individuals with an independent reference method.

Stability of toxic arsenic species and arsenosugars found in the dry alga Hijiki and its water extracts

The achievement of reliable results in speciation analysis requires not only sensitive techniques but also sureness of species stability. Therefore, it is necessary to carry out stability studies because it is important to know with absolute certainty that there is not any species transformation during sample treatment and/or storage. Although several procedures have been recommended for the preservation of species integrity, there is no general agreement, as arsenic species stability depends on the sample matrix, the concentration level and the sample treatment procedure, so it is necessary to assess the arsenic species stability for each case. Thus, the present paper reports the stability tests of arsenic species carried out on the commercially available edible alga Hijiki (Hizikia fusiformis), from Japan, in both the dry sample and its water extracts, which were stored in amber glass and polystyrene containers at -18 and +4°C in the dark. Extractions were carried out with deionized water by microwave-assisted extraction, at a temperature of 90°C and three extraction steps of 5 min each, whereas arsenic speciation analysis was performed by anion exchange high performance liquid chromatography-photo-oxidation-hydride generation-atomic fluorescence spectrometry. The results obtained for the dry alga showed that the arsenic species present in it (arsenate (As(V)), dimethylarsinic acid (DMA) and the arsenosugars glycerol (Gly-sug), phosphate (PO4-sug), sulfonate (SO3-sug) and sulfate (SO4-sug)) were stable for at least 12 months when the sample was stored in polystyrene containers at +20°C in the dark. Regarding water extracts, the best storage conditions consisted of the use of polystyrene containers and a temperature of +4°C, for a maximum storage time of seven days. Therefore, the immediate analysis of Hijiki water extracts would not be necessary, and they could be stored for one week before analysis, ensuring arsenic species stability. This information about species integrity in extracts is especially useful when the sample treatment for arsenic species extraction is time-consuming.

Fractionation and speciation of arsenic in three tea gardens soil profiles and distribution of As in different parts of tea plant (Camellia sinensis L.)

The distribution pattern and fractionation of arsenic (As) in three soil profiles from tea (Camellia sinensis L.) gardens located in Karbi-Anglong (KA), Cachar (CA) and Karimganj (KG) districts in the state of Assam, India, were investigated depth-wise (0-10, 10-30, 30-60 and 60-100 cm). DTPA-extractable As was primarily restricted to surface horizons. Arsenic speciation study showed the presence of higher As(V) concentrations in the upper horizon and its gradual decrease with the increase in soil depths, following a decrease of Eh. As fractionation by sequential extraction in all the soil profiles showed that arsenic concentrations in the three most labile fractions (i.e., water-soluble, exchangeable and carbonate-bound fractions) were generally low. Most arsenic in soils was nominally associated with the organic and Fe-Mn oxide fractions, being extractable in oxidizing or reducing conditions. DTPA-extractable As (assumed to represent plant-available As) was found to be strongly correlated to the labile pool of As (i.e. the sum of the first three fractions). The statistical comparison of means (two-sample t-test) showed the presence of significant differences between the concentrations of As(III) and As(V) for different soil locations, depths and fractions. The risk assessment code (RAC) was found to be below the pollution level for all soils. The measurement of arsenic uptake by different parts of tea plants corroborated the hypothesis that roots act as a buffer and hold back contamination from the aerial parts.

Comparison of four extraction procedures to assess arsenate and arsenite species in contaminated soils

Inorganic arsenic in soils poses an important environmental concern. Several studies reported an oxidation of arsenite to arsenate during its extraction from soils. The objectives of this study were to (1) identify, among published procedures, an extraction method which preserves the oxidation state of arsenic and (2) to assess the influence of soil physicochemical properties on the performance of these methods. Four extraction strategies were compared: 1) 10 M HCl, 2) 15% (v/v) H(3)PO(4), 3) 10 mM phosphate + 0.5% (w/v) NaDDC, and, 4) 1 M H(3)PO(4) + 0.5 M ascorbic acid (C(6)H(8)O(6)). Separation and analysis of As species was performed by HPLC-ICP/MS. Oxidation of As(III) into As(V) during extraction was more important in soils with high content of Mn oxides. Extraction of arsenic from soils with 1 M H(3)PO(4) + 0.5 M C(6)H(8)O(6) under microwaves was the best strategy to extract the majority of As while minimizing conversion of As(III) into As(V).

Arsenic biotransformation in earthworms from contaminated soils

Two species of arsenic (As) resistant earthworm, Lumbricus rubellus and Dendrodrillus rubidus, their host soils and soil excretions (casts) were collected from 23 locations at a former As mine in Devon, UK. Total As concentrations, measured by ICP-MS, ranged from 255 to 13,080 mg kg(-1) in soils, 11 to 877 mg kg(-1) in earthworms and 284 to 4221 mg kg(-1) in earthworm casts from a sub-sample of 10 of the 23 investigated sites. The samples were also measured for As speciation using HPLC-ICP-MS to investigate potential As biotransformation pathways. Inorganic arsenate (As(V)) and arsenite (As(III)) were the only species detected in the soil. As(V) and As(III) were also the dominant species found in the earthworms and cast material together with lower proportions of the organic species methylarsonate (MA(V)), dimethylarsinate (DMA(V)), arsenobetaine (AB) and three arsenosugars. Whilst the inorganic As content of the earthworms increased with increasing As body burden, the concentration of organic species remained relatively constant. These results suggest that the biotransformation of inorganic arsenic to organic species does not contribute to As resistance in the sampled earthworm populations. Quantification of As speciation in the soil, earthworms and cast material allows a more comprehensive pathway for the formation of AB in earthworms to be elucidated.

Analytical speciation as a tool to assess arsenic behaviour in soils polluted by mining

A study is performed to evaluate the occurrence of arsenic in polluted soils using acidic extractions and liquid chromatography-hydride generation-atomic fluorescence spectrometry (LC-HG-AFS) for speciation analysis. Seven soil samples were collected in an abandoned area polluted by mining in the Eastern Pyrenees (Spain), and two uncontaminated soils were taken for reference purposes. Moreover, the total arsenic content is evaluated in two different sieved fractions in order to obtain information on the possible particle-size-dependent association of arsenic with soil components. Soil samples were extracted with both phosphoric and ascorbic acids and the stabilities of the extracted species were studied. The arsenic species were determined by LC-HG-AFS. In addition, the ability of soil grinding to effect species change is also assessed. Arsenite and arsenate were found in the polluted soils, but only arsenate was found in the unpolluted soils. The quality of the results was assessed through a mass balance calculation and by analysing two soil Certified Reference Materials. Valuable information regarding arsenic occurrence in the studied soils is obtained from the speciation results. The presence of arsenite in the extracts can be attributed to arsenopyrite residues, whereas the presence of arsenate indicates release from weathered material.