Electrochemical sensor for 2,4-dichlorophenoxy acetic acid using molecularly imprinted polypyrrole membrane as recognition element

One-Pot Preparation of Ratiometric Fluorescent Molecularly Imprinted Polymer Nanosensor for Sensitive and Selective Detection of 2,4-Dichlorophenoxyacetic Acid

The development of fluorescent molecular imprinting sensors for direct, rapid, and sensitive detection of small organic molecules in aqueous systems has always presented a significant challenge in the field of detection. In this study, we successfully prepared a hydrophilic colloidal molecular imprinted polymer (MIP) with 2,4-dichlorophenoxyacetic acid (2,4-D) using a one-pot approach that incorporated polyglycerol methacrylate (PGMMA-TTC), a hydrophilic macromolecular chain transfer agent, to mediate reversible addition-fragmentation chain transfer precipitation polymerization (RAFTPP). To simplify the polymerization process while achieving ratiometric fluorescence detection, red fluorescent CdTe quantum dots (QDs) and green fluorescent nitrobenzodiazole (NBD) were introduced as fluorophores (with NBD serving as an enhancer to the template and QDs being inert). This strategy effectively eliminated background noise and significantly improved detection accuracy. Uniform-sized MIP microspheres with high surface hydrophilicity and incorporated ratiometric fluorescent labels were successfully synthesized. In aqueous systems, the hydrophilic ratio fluorescent MIP exhibited a linear response range from 0 to 25 μM for the template molecule 2,4-D with a detection limit of 0.13 μM. These results demonstrate that the ratiometric fluorescent MIP possesses excellent recognition characteristics and selectivity towards 2,4-D, thus, making it suitable for selective detection of trace amounts of pesticide 2,4-D in aqueous systems.

Nanosensor Detection of Synthetic Auxins In Planta using Corona Phase Molecular Recognition

Synthetic auxins such as 1-naphthalene acetic acid (NAA) and 2,4-dichlorophenoxyacetic acid (2,4-D) have been extensively used in plant tissue cultures and as herbicides because they are chemically more stable and potent than most endogenous auxins. A tool for rapid in planta detection of these compounds will enhance our knowledge about hormone distribution and signaling and facilitate more efficient usage of synthetic auxins in agriculture. In this work, we show the development of real-time and nondestructive in planta NAA and 2,4-D nanosensors based on the concept of corona phase molecular recognition (CoPhMoRe), to replace the current state-of-the-art sensing methods that are destructive and laborious. By designing a library of cationic polymers wrapped around single-walled carbon nanotubes with general affinity for chemical moieties displayed on auxins and its derivatives, we developed selective sensors for these synthetic auxins, with a particularly large quenching response to NAA (46%) and a turn-on response to 2,4-D (51%). The NAA and 2,4-D nanosensors are demonstrated in planta across several plant species including spinach, Arabidopsis thaliana (A. thaliana), Brassica rapa subsp. chinensis (pak choi), and Oryza sativa (rice) grown in various media, including soil, hydroponic, and plant tissue culture media. After 5 h of 2,4-D supplementation to the hydroponic medium, 2,4-D is seen to accumulate in susceptible dicotyledon pak choi leaves, while no uptake is observed in tolerant monocotyledon rice leaves. As such, the 2,4-D nanosensor had demonstrated its capability for rapid testing of herbicide susceptibility and could help elucidate the mechanisms of 2,4-D transport and the basis for herbicide resistance in crops. The success of the CoPhMoRe technique for measuring these challenging plant hormones holds tremendous potential to advance the plant biology study.

A Review of Nanocomposite-Modified Electrochemical Sensors for Water Quality Monitoring

Electrochemical sensors play a significant role in detecting chemical ions, molecules, and pathogens in water and other applications. These sensors are sensitive, portable, fast, inexpensive, and suitable for online and in-situ measurements compared to other methods. They can provide the detection for any compound that can undergo certain transformations within a potential window. It enables applications in multiple ion detection, mainly since these sensors are primarily non-specific. In this paper, we provide a survey of electrochemical sensors for the detection of water contaminants, i.e., pesticides, nitrate, nitrite, phosphorus, water hardeners, disinfectant, and other emergent contaminants (phenol, estrogen, gallic acid etc.). We focus on the influence of surface modification of the working electrodes by carbon nanomaterials, metallic nanostructures, imprinted polymers and evaluate the corresponding sensing performance. Especially for pesticides, which are challenging and need special care, we highlight biosensors, such as enzymatic sensors, immunobiosensor, aptasensors, and biomimetic sensors. We discuss the sensors' overall performance, especially concerning real-sample performance and the capability for actual field application.

Adsorptive and Electrochemical Properties of Carbon Nanotubes, Activated Carbon, and Graphene Oxide with Relatively Similar Specific Surface Area

Three carbon materials with a highly diversified structure and at the same time much less different porosity were selected for the study: single-walled carbon nanotubes, heat-treated activated carbon, and reduced graphene oxide. These materials were used for the adsorption of 2,4-D herbicide from aqueous solutions and in its electroanalytical determination. Both the detection of this type of contamination and its removal from the water are important environmental issues. It is important to identify which properties of carbon materials play a significant role. The specific surface area is the major factor. On the other hand, the presence of oxygen bound to the carbon surface in the case of contact with an organochlorine compound had a negative effect. The observed regularities concerned both adsorption and electroanalysis with the use of the carbon materials applied.

Real time detection and monitoring of 2, 4-dinitrophenylhydrazine in industrial effluents and water bodies by electrochemical approach based on novel conductive polymeric composite

Much attention has been given to detection and monitoring of hydrazine-based compounds in recent time because of its significant negative impacts on human health and ecosystem (aquatic lives). This prompted the current study focusing on detection of 2, 4-dinitrophenylhydrazine (2, 4-dnphz) using electrochemically synthesized poly-para amino benzoic acid-manganese oxide (P-pABA-MnO₂) composite film. The synthesized P-pABA-MnO₂ composite film was characterized in terms of its structural and morphological properties by X-ray diffraction spectroscopy and field emission scanning electron microscopy respectively. In addition, functionalities and binding energy of p-PABA-MnO2 were confirmed using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy respectively. Finally, electrochemical properties were investigated using electrochemical impedance spectroscopy and cyclic voltammetry. The synthesized P-pABA-MnO₂ displayed good electrocatalytic reduction property towards 2, 4-dnphz with ultra-low limit of detection (0.08 μM; S/N = 3) and very high sensitivity (52 μAμ^-1Mcm^-2). The proposed sensor based on P-pABA-MnO₂ also demonstrated good stability in terms of repeatability, reproducibility and interferents effects. Lastly, the proposed sensor was satisfactorily used in detection of 2, 4-dnphz in environmental real samples.

Molecularly imprinted polymer-based electrochemical sensors for environmental analysis

The ever-increasing presence of contaminants in environmental waters is an alarming issue, not only because of their harmful effects in the environment but also because of their risk to human health. Pharmaceuticals and pesticides, among other compounds of daily use, such as personal care products or plasticisers, are being released into water bodies. This release mainly occurs through wastewater since the treatments applied in many wastewater treatment plants are not able to completely remove these substances. Therefore, the analysis of these contaminants is essential but this is difficult due to the great variety of contaminating substances. Facing this analytical challenge, electrochemical sensing based on molecularly imprinted polymers (MIPs) has become an interesting field for environmental monitoring. Benefiting from their superior chemical and physical stability, low-cost production, high selectivity and rapid response, MIPs combined with miniaturized electrochemical transducers offer the possibility to detect target analytes in-situ. In most reports, the construction of these sensors include nanomaterials to improve their analytical characteristics, especially their sensitivity. Moreover, these sensors have been successfully applied in real water samples without the need of laborious pre-treatment steps. This review provides a general overview of electrochemical MIP-based sensors that have been reported for the detection of pharmaceuticals, pesticides, heavy metals and other contaminants in water samples in the past decade. Special attention is given to the construction of the sensors, including different functional monomers, sensing platforms and materials employed to achieve the best sensitivity. Additionally, several parameters, such as the limit of detection, the linear concentration range and the type of water samples that were analysed are compiled.

SERS-based rapid detection of 2,4-dichlorophenoxyacetic acid in food matrices using molecularly imprinted magnetic polymers

In order to remove the limitations of natural antibodies or enzymes, a nano-magnetic biomimetic platform based on a surface-enhanced Raman scattering (SERS) sensor has been developed for highly sensitive capture and detection of 2,4-dichlorophenoxyacetic acid (2,4-D) in food and water samples. Magnetic-based molecular imprinted polymer nanoparticles (Mag@MIP NPs) were constructed to capture the target 2,4-D molecule via biomimetic recognition, and gold nanoparticles (Au NPs) served as SERS-based probes, which are bound to the Mag@MIP NPs by electrostatic adsorption. The as-prepared SERS-MIP sensor for sensing of 2,4-D achieved a good linear relationship with a low detection limit (LOD) of 0.00147 ng/mL within 2 h and exhibited high sensitivity. The sensor was successfully applied to detect 2,4-D in milk and tap water and achieved good recoveries ranging from 93.5 to 102.2%. Moreover, the designed sensor system exhibited satisfactory results (p > 0.05) compared to HPLC by validation analysis. Hence, the findings demonstrated that the proposed method has significant potential for practical application in food safety and environmental protection. Graphical abstract .

An imprinted polymeric matrix containing DNA for electrochemical sensing of 2,4-dichlorophenoxyacetic acid

The authors describe an electrochemical method for the determination of herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). It is based on the use of a molecularly imprinted polymer (MIP) and of dsDNA as a bio-specific substance. The modified electrode was prepared by electropolymerization of ortho-phenylenediamine (oPD) in the presence of DNA and of 2,4-D (the template). The imprinted MIP was placed on a pencil graphite electrode (PGE) modified with chitosan and multiwalled carbon nanotubes (MWCNTs). The template was removed with 0.4 M NaOH. The interaction of DNA with 2,4-D leads to its adsorption on the electrode, and this increases the sensitivity and selectivity of the method. After rebinding 2,4-D, the decrease in the peak current of oxidation of iron(II) acting as an electrochemical redox probe was measured by differential pulse voltammetry (DPV). The current, typically measured at around 0.5 V, increases linearly in the 0.01 to 10 pM 2,4-D concentration range, and the detection limit is 4.0 fM. The method is highly selective for 2,4-D. The modified electrode was applied to quantify 2,4-D in spiked environmental water and soil samples and gave absolute recoveries varying from 91.5 to 109.0%. Graphical abstractSchematic representation of the fabrication of an electrochemical sensor for determination of 2,4-dichlorophenoxyacetic acid (2,4-D). Initially, the electrode was modified with chitosan and MWCNTs and then a composite was formed on it consisting of ortho-phenylenediamine (oPD), DNA and 2,4-D.

Highly sensitive bioaffinity electrochemiluminescence sensors: Recent advances and future directions

Electrogenerated chemiluminescence (also called electrochemiluminescence and abbreviated ECL) has attracted much attention in various fields of analysis due to the potential remarkably high sensitivity, extremely wide dynamic range and excellent controllability. Electrochemiluminescence biosensor, by taking the advantage of the selectivity of the biological recognition elements and the high sensitivity of ECL technique was applied as a powerful analytical device for ultrasensitive detection of biomolecule. In this review, we summarize the latest sensing applications of ECL bioanalysis in the field of bio affinity ECL sensors including aptasensors, immunoassays and DNA analysis, cytosensor, molecularly imprinted sensors, ECL resonance energy transfer and ratiometric biosensors and give future perspectives for new developments in ECL analytical technology. Furthermore, the results herein discussed would demonstrate that the use of nanomaterials with unique chemical and physical properties in the ECL biosensing systems is one of the most interesting research lines for the development of ultrasensitive electrochemiluminescence biosensors. In addition, ECL based sensing assays for clinical samples analysis and medical diagnostics and developing of immunosensors, aptasensors and cytosensor for this purpose is also highlighted.

Direct molecular imprinting technique to synthesize coated electrospun nanofibers for selective solid-phase microextraction of chlorpyrifos

Molecularly imprinted-electrospun nanofibers based on the use of poly(vinyl alcohol) were fabricated and used as a new sorbent for solid-phase microextraction of chlorpyrifos. The molecularly imprinted nanofibers were prepared by electrospinning and direct molecular imprinting of polymeric nanofibers. Poly(vinyl alcohol) was used as the functional and electrospun polymer. Chlorpyrifos was used as a template molecule, and glutaraldehyde as the cross-linker. Detection was performed by ion mobility spectrometry equipped with a secondary electrospray ionization source. The molecularly imprinted fiber has a selectivity and extraction efficiency better than the fiber fabricated using the conventional method of encapsulating MIP particles in electrospun nanofibers. Parameters affecting the extraction efficiency such as ionic strength, stirring rate, extraction time, and temperature were evaluated. The dynamic range of the method was in the range of 0.5-200 μg L^-1 with the limit of detection of 0.1 μg L^-1. The intra- and inter-day relative standard deviations of the method were 4 and 9%, respectively. The fiber-to-fiber reproducibility for three different fibers is 5%. The spiking recoveries from spiked apple, cucumber, and water samples were in the range of 82-112%. Graphical abstract Molecularly imprinted-electrospun nanofibers were fabricated based on the direct molecular imprinting technique and used as a new SPME fiber coating for selective extraction of chlorpyrifos from fruits and water samples prior its determination by secondary electrospray ionization-ion mobility spectrometry.

Molecularly imprinted graphite spray ionization-ion mobility spectrometry: application to trace analysis of the pesticide propoxur

A porous graphite sheet modified by a molecularly imprinted polymer (MIP) was directly used as the spray ionization source for ion mobility spectrometry (IMS). Therefore, it was possible to selectively analyze samples extracted by the molecularly imprinted polymer. This obviates the need for the steps of elution, solvent evaporation, dissolution and injection. To prepare the sheet, the graphite surface was first modified by electrodeposition of a molecularly imprinted polypyrrole film. This polypyrrole film was fabricated in a three-electrode electrochemical system using cyclic voltammetry. The electropolymerization of the graphite sheet was carried out with LiClO₄ as a supporting electrolyte in the reaction solution. The effects of the amount of monomer, the level of template concentrations, and the time of polymerization on the extraction efficiency of the MIP film were evaluated. The extraction conditions including extraction time, the extraction temperature, the pH values, the salt concentrations, and the stirring rate were also studied. Methanol was selected as the most suitable solvent for both desorption and ionization which occur simultaneously. The pesticide propoxur (acting as a test compound) was extracted from water samples and directly analyzed using IMS. The analytical parameters (working range: 1.0 to 250 ng·mL^-1; detection limit: 0.3 ng·mL^-1) indicated that the direct coupling of MIP and IMS has a great potential in terms of reproducibility, and speed of the analysis, while maintaining acceptable sensitivity. Graphical abstract Schematic presentation of molecularly imprinted graphite spray ionization coupled with ion mobility spectrometry (IMS) for rapid/selective extraction and ionization: Application to the pre-concentration of propoxur prior to its quantification by IMS.

Deposition of CdTe quantum dots on microfluidic paper chips for rapid fluorescence detection of pesticide 2,4-D

Rapid detection of pesticides in fruits is an ongoing challenge. The objective of the present study was to develop novel fluorescent microfluidic paper chips for specific recognition and sensitive detection of the pesticide 2,4-D through the electron-transfer-induced fluorescence quenching mechanism. CdTe quantum dots (QDs) were deposited onto cellulose paper (base material) to yield imprinted paper chips (paper@QDs@MIPs). This method allows the transferability of the molecularly imprinted fluorescence sensor from the liquid phase to the solid phase (paper base) for rapid and portable analysis. The resultant imprinted paper chips were effectively characterized, and they exhibited ideal ordered spatial network structure, chemical stability, and fluorescence property. The paper@QDs@MIPs showed that 2,4-D binding significantly reduced the fluorescence intensity within less than 18 min, and it achieved satisfactory linearity in the range of 0.83-100 μM and high detectability of 90 nM. The recognition specificity for 2,4-D relative to its analogues was shown, and the imprinting factor was 2.13. In addition, the recoveries of the spiked bean sprouts at three concentration levels ranged within 94.2-107.0%, with a relative standard deviation of less than 5.9%. Collectively, the device provided an effective platform for rapid recognition, convenience, and detection of trace food pollutants in complex matrices, thereby ensuring food safety and further promoting surface imprinting studies.

A molecularly imprinted electrochemiluminescence sensor for ultrasensitive HIV-1 gene detection using EuS nanocrystals as luminophore

Development of simple, sensitive and specific method for human immunodeficiency virus (HIV) assays are urgently demand. In this study, we developed a novel molecularly imprinted polymer (MIP) electrochemiluminescence (MIP-ECL) sensor for the highly sensitive and selective HIV-1 gene detection using Europium sulfide nanocrystals (EsNCs) as signal producing compound. Here, the HIV aptamer as the template and o-phenylenediamine as the functional monomer, were electropolymerized directly on the surface of ITO electrode. With the hybridization reaction between the assemblies of EuS NCs functionalized 5-amino-labeled oligonucleotides as capture probes and oligonucleotides as detection target (HIV gene), the ECL signal significantly increased using K₂S₂O₈ as coreactant. Taking advantage of both MIP-ECL assays and the strong electrochemiluminescence emission of EuS NCs, the sensitive and selective HIV gene detection has been achieved in a linear range 3.0 fM to 0.3 nM with a detection limit of 0.3 fM. The present MIP-ECL biosensor showed good specificity for HIV DNA detection compared to non-complementary and two bases mismatched sequences. The proposed ECL biosensor was applied to detect of HIV DNA in real human serum samples and satisfactory results were obtained. Due to high sensitivity and selectivity, excellent reproducibility and stability of the proposed assay, EuS NCs can be used as novel luminophore for development of MIP-ECL sensors for detection of other DNA biomarkers.

Dendrimer-like amino-functionalized hierarchical porous silica nanoparticle: A host material for 2,4-dichlorophenoxyacetic acid imprinting and sensing

In this work, a novel molecularly imprinted electrochemical sensor based on the amino-functionalized silica nanoparticles was built for the sensitive and selective detection of 2,4-dichlorophenoxyacetic acid (2,4-D). The hierarchical porous dendrimer-like silica nanoparticles (HPSNs-NH₂) were synthesized by an ethyl ether emulsion method. The selective molecularly imprinted polymers (MIP) was prepared on the HPSNs-NH₂ modified electrode via electropolymerization by using 2,4-D as the template and o-phenylenediamine (OPD) as the monomer. The porous structure of HPSNs-NH₂ reduced the diffusion limitations of the analytes, enhanced the accessibility and increased the surface area of the sensor, while the MIP layer offered the ability to recognize and quantify target 2,4-D by using ferro/ferricyanide as probes. Several significant experimental parameters on the analytical performance of the MIP/HPSNs-NH₂ sensor were explored and optimized. Under the optimized condition, the sensor displayed an appreciable selectivity over structurally related compounds and good sensitivity toward 2,4-D. The linear range of 2,4-D detection was from 1.00 × 10^-10 to 2.50 × 10^-8M and the detection limit was down to 1.17 × 10^-11M according to the 3S_a/b criteria. This method has been applied to detect 2,4-D in bean sprout samples with satisfying results.

Integrating fluorescent molecularly imprinted polymer (MIP) sensor particles with a modular microfluidic platform for nanomolar small-molecule detection directly in aqueous samples

Fluorescent sensory MIP (molecularly imprinted polymer) particles were combined with a droplet-based 3D microfluidic system for the selective determination of a prototype small-molecule analyte of environmental concern, 2,4-dichlorophenoxyacetic acid or 2,4-D, at nanomolar concentration directly in water samples. A tailor-made fluorescent indicator cross-linker was thus designed that translates the binding event directly into an enhanced fluorescence signal. The phenoxazinone-type cross-linker was co-polymerized into a thin MIP layer grafted from the surface of silica microparticles following a RAFT (reversible addition-fragmentation chain transfer) polymerization protocol. While the indicator cross-linker outperformed its corresponding monomer twin, establishment of a phase-transfer protocol was essential to guarantee that the hydrogen bond-mediated signalling mechanism between the urea binding site on the indicator cross-linker and the carboxylate group of the analyte was still operative upon real sample analysis. The latter was achieved by integration of the fluorescent core-shell MIP sensor particles into a modular microfluidic platform that allows for an in-line phase-transfer assay, extracting the analyte from aqueous sample droplets into the organic phase that contains the sensor particles. Real-time fluorescence determination of 2,4-D down to 20nM was realized with the system and applied for the analysis of various surface water samples collected from different parts of the world.

Molecularly imprinted membranes (MIMs) for selective removal of polychlorinated biphenyls (PCBs) in environmental waters: fabrication and characterization

Molecularly imprinted membranes (MIMs) with selective removal properties for polychlorinated biphenyls (PCBs) were prepared through the phase inversion technique. The MIMs were obtained from casting the viscous solutions of molecularly imprinted polymers (MIPs), polysulfone (PSf), and N-methyl-2-pyrrolidone (NMP) as the casting solvent. Different membranes were prepared at different concentration of MIPs and PSf. The resulting MIMs were characterized by atomic force microscope (AFM), scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR). Moreover, the performance of the membranes was evaluated by determining and interpreting the rejection (%), flux (F), permeability coefficient (P), permselectivity factor ( α ^'_{PCB/DDT or anthracene}), and enrichment factors of PCBs, dichlorodiphenyltrichloroethane (p,p'-DDT), and anthracene from model contaminated water using the dead-end filtration cell. Molecularly imprinted membrane prepared with 18 wt% PSf and 20 wt% MIP 4 exhibited a well-defined porous structure, which was accompanied by enhanced PCB enrichment. Furthermore, molecularly imprinted membrane showed good enrichment factors for PCBs even from spiked natural water samples of Hartbeespoort dam.

Molecularly imprinted electrochemical sensor based on Au nanoparticles in carboxylated multi-walled carbon nanotubes for sensitive determination of olaquindox in food and feedstuffs

A novel molecularly imprinted electrochemical sensor (MIECS) was proposed to determine olaquindox (OLA) using gold nanoparticles in molecularly imprinted polymer (AuNPs@MIP) and carboxylated multi-walled carbon nanotubes (cMWCNTs). Glassy carbon electrode (GCE) was modified with cMWCNTs (cMWCNTs/GCE), and AuNPs/cMWCNT/GCE was obtained by electrodeposition on cMWCNTs/GCE using chronoamperometry in HAuCl₄. Then, the obtained MIP/AuNPs/cMWCNTs/GCE was electropolymerized using OLA as template and o-PD as monomer to determine OLA. Important experimental parameters, namely, scan cycles, mole ratio of template molecules to functional monomers, pH value, and incubation time were optimized. The novel MIP sensor can offer a 2.7nM of detection limit for OLA. In addition, a series of food and feedstuffs were analyzed to demonstrate the feasibility of MIECS.

Inhibition-based first-generation electrochemical biosensors: theoretical aspects and application to 2,4-dichlorophenoxy acetic acid detection

In this work, several theoretical aspects involved in the first-generation inhibition-based electrochemical biosensor measurements have been discussed. In particular, we have developed a theoretical-methodological approach for the characterization of the kinetic interaction between alkaline phosphatase (AlP) and 2,4-dichlorophenoxy acetic acid (2,4-D) as representative inhibitor studied by means of cyclic voltammetry and amperometry. Based on these findings, a biosensor for the fast, simple, and inexpensive determination of 2,4-D has been developed. The enzyme has been immobilized on screen-printed electrodes (SPEs). To optimize the biosensor performances, several carbon-based SPEs, namely graphite (G), graphene (GP), and multiwalled carbon nanotubes (MWCNTs), have been evaluated. AlP was immobilized on the electrode surface by means of polyvinyl alcohol with styryl-pyridinium groups (PVA-SbQ) as cross-linking agent. In the presence of ascorbate 2-phosphate (A2P) as substrate, the herbicide has been determined, thanks to its inhibition activity towards the enzyme catalyzing the oxidation of A2P to ascorbic acid (AA). Under optimum experimental conditions, the best performance in terms of catalytic efficiency has been demonstrated by MWCNTs SPE-based biosensor. The inhibition biosensor shows a linearity range towards 2,4-D within 2.1-110 ppb, a LOD of 1 ppb, and acceptable repeatability and stability. This analysis method was applied to fortified lake water samples with recoveries above 90%. The low cost of this device and its good analytical performances suggest its application for the screening and monitoring of 2,4-D in real matrices.

Novel electrochemical sensing platform based on a molecularly imprinted polymer decorated 3D nanoporous nickel skeleton for ultrasensitive and selective determination of metronidazole

A novel electrochemical sensor has been developed by using a composite element of three-dimensional (3D) nanoporous nickel (NPNi) and molecularly imprinted polymer (MIP). NPNi is introduced in order to enhance the electron-transport ability and surface area of the sensor, while the electrosynthesized MIP layer affords simultaneous identification and quantification of the target molecule by employing Fe(CN)6(3-/4-) as the probe to indicate the current intensity. The morphology of the hybrid film was observed by scanning electron microscopy, and the properties of the sensor were examined by cyclic voltammetry and electrochemical impedance spectroscopy. By using metronidazole (MNZ) as a model analyte, the sensor based on the MIP/NPNi hybrid exhibits great features such as a remarkably low detection limit of 2 × 10(-14) M (S/N = 3), superb selectivity in discriminating MNZ from its structural analogues, and good antiinterference ability toward several coexisting substances. Moreover, the proposed method also demonstrates excellent repeatability and stability, with relative standard deviations of less than 1.12% and 1.4%, respectively. Analysis of MNZ in pharmaceutical dosage form and fish tissue is successfully carried out without assistance of complicated pretreatment. The MIP/NPNi composite presented here with admirable merits makes it a promising candidate for developing electrochemical sensor devices and plays a role in widespread fields.

Molecularly imprinted polymer decorated nanoporous gold for highly selective and sensitive electrochemical sensors

Electrochemical nanosensors based on nanoporous gold leaf (NPGL) and molecularly imprinted polymer (MIP) are developed for pharmaceutical analysis by using metronidazole (MNZ) as a model analyte. NPGL, serving as the loading platform for MIP immobilization, possesses large accessible surface area with superb electric conductivity, while electrochemically synthesized MIP thin layer affords selectivity for specific recognition of MNZ molecules. For MNZ determination, the hybrid electrode shows two dynamic linear range of 5 × 10(-11) to 1 × 10(-9) mol L(-1) and 1 × 10(-9) to 1.4 × 10(-6) mol L(-1) with a remarkably low detection limit of 1.8 × 10(-11) mol L(-1) (S/N = 3). In addition, the sensor exhibits high binding affinity and selectivity towards MNZ with excellent reproducibility and stability. Finally, the reliability of MIP-NPGL for MNZ detection is proved in real fish tissue samples, demonstrating the potential for the proposed electrochemical sensors in monitoring drug and biological samples.

A potential-gated molecularly imprinted smart electrode for nicotinamide analysis

Triggered surface responsiveness paves the way for smart sensor technologies that not only have tunable retention, but also provide sensing through a ‘built-in’ programming of electrode material.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Selective extraction of dimethoate from cucumber samples by use of molecularly imprinted microspheres

Molecularly imprinted polymers for dimethoate recognition were synthesized by the precipitation polymerization technique using methyl methacrylate (MMA) as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. The morphology, adsorption and recognition properties were investigated by scanning electron microscopy (SEM), static adsorption test, and competitive adsorption test. To obtain the best selectivity and binding performance, the synthesis and adsorption conditions of MIPs were optimized through single factor experiments. Under the optimized conditions, the resultant polymers exhibited uniform size, satisfactory binding capacity and significant selectivity. Furthermore, the imprinted polymers were successfully applied as a specific solid-phase extractants combined with high performance liquid chromatography (HPLC) for determination of dimethoate residues in the cucumber samples. The average recoveries of three spiked samples ranged from 78.5% to 87.9% with the relative standard deviations (RSDs) less than 4.4% and the limit of detection (LOD) obtained for dimethoate as low as 2.3 μg/mL.

Bio-mimetic sensors based on molecularly imprinted membranes

An important challenge for scientific research is the production of artificial systems able to mimic the recognition mechanisms occurring at the molecular level in living systems. A valid contribution in this direction resulted from the development of molecular imprinting. By means of this technology, selective molecular recognition sites are introduced in a polymer, thus conferring it bio-mimetic properties. The potential applications of these systems include affinity separations, medical diagnostics, drug delivery, catalysis, etc. Recently, bio-sensing systems using molecularly imprinted membranes, a special form of imprinted polymers, have received the attention of scientists in various fields. In these systems imprinted membranes are used as bio-mimetic recognition elements which are integrated with a transducer component. The direct and rapid determination of an interaction between the recognition element and the target analyte (template) was an encouraging factor for the development of such systems as alternatives to traditional bio-assay methods. Due to their high stability, sensitivity and specificity, bio-mimetic sensors-based membranes are used for environmental, food, and clinical uses. This review deals with the development of molecularly imprinted polymers and their different preparation methods. Referring to the last decades, the application of these membranes as bio-mimetic sensor devices will be also reported.

Serine Sensor Based on Graphene Sheet Congo-Red Molecular Imprinted Polymer (GSCR-MIP) Organic Thin Film Transistor (OTFT)

Molecular imprinted is a technique to produce template-shape cavities in polymer matrix with memory of the template/target molecule for chemical sensor front-end. In this study, it has been shown that the incorporation of graphene sheets/Congo red (GSCR) has enhanced the performance of molecular imprinted polymer (MIP) serine sensor. The polymer is formed via photo-polymerization from methyl methacrylate acid (functional monomer), serine (template) and ethylene glycol dimethacrylate (cross-linker) together with GSCR. By introducing GSCR-MIP, GSCR-MIP OTFT chemical sensor demonstrates a good response when serine is introduced. The performance of GSCR-MIP OTFT serine sensor can be improved through the addition of GSCR, thus GSCR-MIP has high potentials for application in sensor fabrication.

Electroanalytical Methodology for the Direct Determination of 2,4-Dichlorophenoxyacetic Acid in Soil Samples Using a Graphite-Polyurethane Electrode

An electroanalytical methodology was developed for the direct determination of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) using a graphite-polyurethane composite electrode and square wave voltammetry (SWV). 2,4-D exhibited one reduction peak with characteristics of an irreversible process at −0.54 V (versus Ag/AgCl), which is controlled by the diffusion of the reagent on the electrode surface. After the experimental parameters optimization (pH 2.0,f=50 s−1,a=0.50 V, andΔEi=0.03 V), analytical curves were constructed in the range of 0.66 mg L−1to 2.62  mg L−1. Detection (LD) and quantification (LQ) limits were 17.6 μg L−1and 58.6 μg L−1, respectively. The methodology was successfully applied to measure the percolation of the herbicide 2,4-D in undisturbed soil columns of different granulometric compositions.