Recent progress in surface enhanced Raman spectroscopy for the detection of environmental pollutants

Generic method for the detection of short & long chain PFAS extended to the lowest concentration levels of SERS capability

The detection of the highly toxic per- and polyfluoroalkyl substances, PFAS, constitutes a challenging task in terms of developing a generic method that could be rapid and applicable simultaneously to both long and short-chain PFAS at ppt concentration level. In the present study, the method introduced by the USA Environmental Protection Agency, EPA, to detect surfactants, using methylene blue, MB, which is identified an ideal candidate for PFAS-MB ion pairing, is extended at the lowest concentration range by a simple additional step that involves the dissociation of the ion pairs in water. In this work, Surface Enhanced Raman Scattering, SERS, is applied via Ag nanocolloidal suspensions to probe MB and indirectly either/or both short-chain (perfluorobutyric acid, PFBA) and long-chain (perfluoloctanoic acid, PFOA) PFAS downt to 5 ppt. This method, which can be further optimized to sub-ppt level via a custom-made SERS-PFAS dedicated Raman system, offers the possibility to be applied to either specific PFAS (both short and long-chain) in a targeted analysis or to total PFAS in a non-targeted analysis at very low detection limits, following any type of MB detection method in aqueous solutions and obviously with any type of SERS substrate.

Evaluation of the SERS performances of Tabun and VX label-free detection in complex and multicomponent fluids

Nerve agents represent a serious threat to security worldwide. Chemical terrorism has become an alarming danger since the technological progresses have simplified the production of nerve agents. Therefore, there is an immediate demand for a fast and precise detection of these compounds on-site and real-time. In this perspective, Surface-Enhanced Raman Scattering (SERS) has emerged as a well-suited alternative for on-field detection. SERS performances of unfunctionalized SERS substrates were evaluated in realistic samples. Two nerve agents, Tabun and VX, were diluted in two matrix models: a contact lens solution, and a caffeine-based eye serum. The performance two research-grade instruments and two portable devices were compared. Despite the use of a small sampling volume of complex matrices without any sample pre-treatment, we achieved Tabun detection in both media, with a practical limit of detection (LOD) in the range of 7-9 ppm in contact lens liquid, and of 10.2 ppm in eye serum. VX detection turned out to be more challenging and was achieved only in contact lens solution, with a practical LOD in the range of 0.6-5 ppm. These results demonstrate the feasibility of on-field detection of nerve agents with SERS, that could be implemented when there is suspicion of chemical threat.

Silver nanopopcorns decorated on flexible membrane for SERS detection of nitrofurazone

The synthesis of three-dimensional silver nanopopcorns (Ag NPCs) onto a flexible polycarbonate membrane (PCM) for the detection of nitrofurazone (NFZ) on the fish surface by surface-enhanced Raman spectroscopy (SERS) is presented. The proposed flexible Ag-NPCs/PCM SERS substrate exhibits significant Raman signal intensity enhancement with the measured enhancement factor of 2.36 × 106. This is primarily attributed to the hotspots created on Ag NPCs, including numerous nanoscale protrusions and internal crevices distributed across the surface of Ag NPCs. The detection of NFZ by this flexible SERS substrate demonstrates a low limit of detection (LOD) of 3.7 × 10-9 M and uniform and reproducible Raman signal intensities with a relative standard deviation below 8.34%. It also exhibits excellent stability, retaining 70% of its efficacy even after 10 days of storage. Notably, the practical detection of NFZ in tap water, honey water, and fish surfaces achieves LOD values of 1.35 × 10-8 M, 5.76 × 10-7 M, and 3.61 × 10-8 M, respectively,  which highlights its effectiveness across different sample types. The developed Ag-NPCs/PCM SERS substrate presents promising potential for sensitive SERS detection of toxic substances in real-world samples.

Analysis and remediation of phthalates in aquatic matrices: current perspectives

Phthalic acid esters (PAEs) are high production volume chemicals used extensively as plasticizers, to increase the flexibility of the main polymer. They are reported to leach into their surroundings from plastic products and are now a ubiquitous environmental contaminant. Phthalate levels have been determined in several environmental matrices, especially in water. These levels serve as an indicator of plasticizer abuse and plastic pollution, and also serve as a route of exposure to different species including humans. Reports published on effects of different PAEs on experimental models demonstrate their carcinogenic, teratogenic, reproductive, and endocrine disruptive effects. Therefore, regular monitoring and remediation of environmental water samples is essential to ascertain their hazard quotient and daily exposure levels. This review summarises the extraction and detection techniques available for phthalate analysis in water samples such as chromatography, biosensors, immunoassays, and spectroscopy. Current remediation strategies for phthalate removal such as adsorption, advanced oxidation, and microbial degradation have also been highlighted.

Preparation of arsenic(III) monoclonal antibodies and preliminary evaluation of a novel silver-coated gold nanorod SERS immunoassay strip construction

Heavy metal pollution has become a growing concern in industrial, agricultural, and manufacturing processes, posing a significant threat to human health. Among these heavy metals, arsenic (As) is highly toxic and shares similar chemical properties and environmental behavior with other heavy metals. As(III) is particularly toxic compared to other forms of arsenic. Therefore, it is essential to develop a real-time, rapid, and sensitive method for the determination of As(III). In this study, we employed a unique bifunctional chelator, 1-(4-isothiocyanobenzyl)-ethylenediamine N,N,N',N'-tetraacetic acid (ITCBE), to prepare a complete antigen. Through a series of tests including balb/c mouse immunization, cell fusion (mouse L2041 spleen cells with mouse myeloma cells SP2/0), and subcloning, we generated four monoclonal cell lines (1C1, 2C2, 3A9, and 4A11). These cell lines demonstrated high purity, high affinity, and IC50 values of less than 50 μg mL-1. Monoclonal antibody 4A11, which exhibited a strong Raman signal, was selected as the probe, and Au@Ag 200 was utilized as the surface-enhanced Raman scattering (SERS) substrate for the preliminary establishment of SERS immunochromatographic test strips. The sensitivity of the SERS immunochromatographic test strips, measured through Raman signal detection, showed a significant improvement compared to the SERS immunochromatographic test strips analyzed by colorimetry (LOD = 49.43 μg mL-1 and LDR = 5.32-81.31 μg mL-1). The SERS immunochromatographic test strips achieved a LOD of 7.62 μg mL-1 and an LDR of 12.66-71.84 μg mL-1. This study presents innovative methodologies for the rapid detection of As(III) using SERS immunochromatographic test strips.

Research Progress of SERS Sensors Based on Hydrogen Peroxide and Related Substances

Hydrogen peroxide (H2O2) has an important role in living organisms, and its detection is of great importance in medical, chemical, and food safety applications. This review provides a comparison of different types of Surface-enhanced Raman scattering (SERS) sensors for H2O2 and related substances with respect to their detection limits, which are of interest due to high sensitivity compared to conventional sensors. According to the latest research report, this review focuses on the sensing mechanism of different sensors and summarizes the linear range, detection limits, and cellular applications of new SERS sensors, and discusses the limitations in vivo and future prospects of SERS technology for the detection of H2O2.

Advances in Surface-Enhanced Raman Scattering Sensors of Pollutants in Water Treatment

Water scarcity is a world issue, and a solution to address it is the use of treated wastewater. Indeed, in these wastewaters, pollutants such as pharmaceuticals, pesticides, herbicides, and heavy ions can be present at high concentrations. Thus, several analytical techniques were initiated throughout recent years for the detection and quantification of pollutants in different types of water. Among them, the surface-enhanced Raman scattering (SERS) technique was examined due to its high sensitivity and its ability to provide details on the molecular structure. Herein, we summarize the most recent advances (2021-2023) on SERS sensors of pollutants in water treatment. In this context, we present the results obtained with the SERS sensors in terms of detection limits serving as assessment of SERS performances of these sensors for the detection of various pollutants.

Toward microfluidic SERS and EC-SERS applications via tunable gold films over nanospheres

Many promising applications of surface-enhanced Raman scattering (SERS), such as microfluidic SERS and electrochemical (EC)-SERS, require immersion of plasmonic nanostructured films in aqueous media. Correlational investigations of the optical response and SERS efficiency of solid SERS substrates immersed in water are absent in the literature. This work presents an approach for tuning the efficiency of gold films over nanospheres (AuFoN) as SERS substrates for applications in aqueous environment. AuFoN are fabricated by convective self-assembly of colloidal polystyrene nanospheres of various diameters (300-800 nm), followed by magnetron sputtering of gold films. The optical reflectance of the AuFoN and Finite-Difference Time-Domain simulations in both water and air reveal the dependence of the surface plasmon band on nanospheres' diameter and environment. SERS enhancement of a common Raman reporter on AuFoN immersed in water is analyzed under 785 nm laser excitation, but also using the 633 nm line for the films in air. The provided correlations between the SERS efficiency and optical response in both air and water indicate the best structural parameters for high SERS efficiency and highlight a route for predicting and optimizing the SERS response of AuFoN in water based on the behavior in air, which is more practical. Finally, the AuFoN are successfully tested as electrodes for EC-SERS detection of the thiabendazole pesticide and as SERS substrates integrated in a flow-through microchannel format. The obtained results represent an important step toward the development of microfluidic EC-SERS devices for sensing applications.

Sensing Antibiotics in Wastewater Using Surface-Enhanced Raman Scattering

Rapid and cost-effective detection of antibiotics in wastewater and through wastewater treatment processes is an important first step in developing effective strategies for their removal. Surface-enhanced Raman scattering (SERS) has the potential for label-free, real-time sensing of antibiotic contamination in the environment. This study reports the testing of two gold nanostructures as SERS substrates for the label-free detection of quinoline, a small-molecular-weight antibiotic that is commonly found in wastewater. The results showed that the self-assembled SERS substrate was able to quantify quinoline spiked in wastewater with a lower limit of detection (LoD) of 5.01 ppb. The SERStrate (commercially available SERS substrate with gold nanopillars) had a similar sensitivity for quinoline quantification in pure water (LoD of 1.15 ppb) but did not perform well for quinoline quantification in wastewater (LoD of 97.5 ppm) due to interferences from non-target molecules in the wastewater. Models constructed based on machine learning algorithms could improve the separation and identification of quinoline Raman spectra from those of interference molecules to some degree, but the selectivity of SERS intensification was more critical to achieve the identification and quantification of the target analyte. The results of this study are a proof-of-concept for SERS applications in label-free sensing of environmental contaminants. Further research is warranted to transform the concept into a practical technology for environmental monitoring.

New trends in methyl salicylate sensing and their implications in agriculture

Methyl salicylate (MeSal) is an organic compound present in plants during stress events and is therefore a key marker for early plant disease detection. It has usually been detected by conventional methods that require bulky and costly equipment, such as gas chromatography or mass spectrometry. Currently, however, chemical sensors provide an alternative for MeSal monitoring, showing good performance for its determination in the vapour or liquid phase. The most promising concepts used in MeSal determination include sensors based on electrochemical and conductometric principles, although other technologies based on mass-sensitive, microwave, or spectrophotometric principles also show promise. The receptor elements or sensitive materials are shown to be part of the key elements in these sensing technologies. A literature survey identified a significant contribution of bioreceptors, including enzymes, odourant-binding proteins or peptides, as well as receptors based on polymers or inorganic materials in MeSal determination. This work reviews these concepts and materials and discusses their future prospects and limitations for application in plant health monitoring.

Place & Play SERS: sample collection and preparation-free surface-enhanced Raman spectroscopy

The ability to perform sensitive, real-time, in situ, multiplex chemical analysis is indispensable for diverse applications such as human health monitoring, food safety testing, forensic analysis, environmental sensing, and homeland security. Surface-enhanced Raman spectroscopy (SERS) is an effective tool to offer the ability by virtue of its high sensitivity and rapid label-free signal detection as well as the availability of portable Raman spectrometers. Unfortunately, the practical utility of SERS is limited because it generally requires sample collection and preparation, namely, collecting a sample from an object of interest and placing the sample on top of a SERS substrate to perform a SERS measurement. In fact, not all analytes can satisfy this requirement because the sample collection and preparation process may be undesirable, laborious, difficult, dangerous, costly, or time-consuming. Here we introduce "Place & Play SERS" based on an ultrathin, flexible, stretchable, adhesive, biointegratable gold-deposited polyvinyl alcohol (PVA) nanomesh substrate that enables placing the substrate on top of an object of interest and performing a SERS measurement of the object by epi-excitation without the need for touching, destroying, and sampling it. Specifically, we characterized the sensitivity of the gold/PVA nanomesh substrate in the Place & Play SERS measurement scheme and then used the scheme to conduct SERS measurements of both wet and dry objects under nearly real-world conditions. To show the practical utility of Place & Play SERS, we demonstrated two examples of its application: food safety testing and forensic analysis. Our results firmly verified the new measurement scheme of SERS and are expected to extend the potential of SERS by opening up untapped applications of sensitive, real-time, in situ multiplex chemical analysis.

Plasmonic 3-D wrinkled polymeric shrink film-based SERS substrates for pesticide detection on real-world surfaces

The continuous and excessive use of agrochemicals for crop improvement and protection has raised widespread concern, as they exert adverse effects on human health and the local environment. Surface Enhanced Raman Spectroscopy (SERS) provides a method for the quick identification and detection of such hazardous substances in a short amount of time due to its properties of being robust, accurate, sensitive and non-destructive. Despite the fact that several SERS substrates have been developed, the bulk of them are ineffective in terms of sample collection or providing reproducible results. In this study, we showed that a 3-D wrinkled polymeric heat-shrink film coated with Au bead@Ag nanorods (silver nanorods) serves as a potential SERS substrate for trace analysis. The surface of the heat-shrink film became wrinkled after heating, and this, along with the spatial arrangement of nanoparticles, significantly enhances the Raman signal of the analytes. The fabricated SERS substrate was able to sense two model analytes 1,4-benzenedithiol (BDT) and 2-naphthalenethiol (NT) up to 10^-13 M and 10^-11 M concentrations. The fabricated substrate was also effective in sensing thiram down to 10^-13 M concentration. Additionally, the SERS substrate was applied in a real-world setting for the detection of the pesticide thiram spiked onto apple skin surfaces. To collect the thiram residues, the substrate was simply swabbed across the surface of the apple. This allowed for the detection of thiram at concentrations as low as 10^-9 M (1 ppb). The fabricated SERS substrate can thus detect analytes in an efficient, sensitive, dependable and accurate manner, allowing for the sensing of trace analytes like pesticides in a real-world environment.

Double-sided plasmonic metasurface for simultaneous biomolecular separation and SERS detection

Porous membrane-based nanofiltration separation of small biomolecules is a widely used biotechnology for which size-based selectivity is a critical parameter of technological relevance. Efficient determination of size selectivity calls for an advanced detection method capable of performing sensitive, rapid, and on-membrane examination. Surface-enhanced Raman spectroscopy (SERS) is such a detection method that has been widely recognized as an ultrasensitive technique for trace-level detection with sensitivity down to the single-molecule level. In this work, we for the first time develop a double-sided hierarchical porous membrane-like plasmonic metasurface to realize high-selectivity bimolecular separation and simultaneous ultrasensitive SERS detection. This highly flexible device, consisting of subwavelength nanocone pairs surrounded by randomly orientated sub-5 nm nanogrooves, was prepared by combining customized "top-down" fabrication of conical nanopores in an ion-track registered polycarbonate membrane and self-assembly of nanogrooves on the membrane surface through physical vapor deposition. The unique tip-to-tip oriented conical nanopores in the device enables excellent size-based molecular selectivity; the hierarchical groove-pore structure supports a peculiar cascaded electromagnetic near-field enhancement mechanism, endowing the device with SERS-based molecular detection of ultrahigh sensitivity, uniformity, repeatability, and polarization independence. With such dual structural merits and performance enhancement, we demonstrate effective nanofiltration separation of small-sized adenine from big-sized ss-DNA and synergistic SERS determination of their species. We experimentally demonstrate an ultrasensitive detection of 4-mercaptopyridine down to 10 pM. Together with its unparalleled mechanical flexibility, this double-side-responsive plasmonic metasurface membrane can find great potential in real-world molecular filtration and detection under extremely complex working conditions.

Release of free-state ions from fulvic acid-heavy metal complexes via VUV/H2O2 photolysis: Photodegradation of fulvic acids and recovery of Cd2+ and Pb2+ stripping voltammetry currents

Fulvic acid (FA), a ubiquitous organic matter in the environment, can enhance the mobility and bioavailability of Cd²⁺ and Pb²⁺ through competitive complexation to form FA-heavy metal ions (FA-HMIs) complexes with excellent solubility. Because FA-HMIs are electrochemically inactive, square wave anodic stripping voltammetry (SWASV) cannot accurately detect the content of bioavailable Cd²⁺ and Pb²⁺ in soils and sediments. This study ostensibly aimed to efficiently recover SWASV signals of Cd²⁺ and Pb²⁺ in FA-HMIs by disrupting FA-HMIs complexes using the combined vacuum ultraviolet and H₂O₂ (VUV/H₂O₂) process. Essentially, this study explored the photodegradation behavior and photolysis by-products of FA and their effects on the conversion of FA-HMIs complexes to free-state Cd²⁺ and Pb²⁺ using multiple characterization techniques, as well as revealed the complexation mechanism of FA with Cd²⁺ and Pb²⁺. Results showed that reactive groups such as carboxyl and hydroxyl endowed FA with the ability to complex Cd²⁺ and Pb²⁺. After FA-HMIs underwent VUV/H₂O₂ photolysis for 9 min at 125 mg/L of H₂O₂, FA was decomposed into small molecular organics while removing its functional groups, which released the free-state Cd²⁺ and Pb²⁺ and recovered their SWSAV signals. However, prolonged photolytic mineralization of FA to inorganic anions formed precipitates with Cd²⁺ and Pb²⁺, thereby decreasing their SWSAV signals. Moreover, the VUV/H₂O₂ photolysis significantly improved the SWASV detection accuracy toward the Cd²⁺ and Pb²⁺ in real soil and sediment samples, verifying its practicality.

Controlled fiber core mode and surface mode interaction for enhanced SERS performance

Three-dimensional surface-enhanced Raman scattering (SERS) platform based on microstructure fibers has many advantages for rapid liquid detection due to its microfluidic channels and light guidance. The fiber mode field distribution determines the light-analyte interaction strength but has rarely been studied in SERS applications. In this paper, we numerically and experimentally investigate the mode field distribution in suspended-core fibers decorated with gold nanoparticles. The interaction between the core mode and surface mode is controlled by changing the density of gold nanoparticles on the inner surface. The avoided crossing wavelength shifts linearly to red with the decrease of the nanoparticle spacing. With an optimized nanoparticle spacing of 20 nm, the avoided crossing occurs near the laser wavelength of 633 nm, which greatly increases the power ratio in the liquid channels and hence improves the SERS performance. The detection limit for crystal violet was 10^-9 M, and the enhancement factor was 10⁸. The avoided crossing mechanism can be applied to all fiber SERS probes for sensitivity improvement.

Rapid Detection of Malathion, Phoxim and Thiram on Orange Surfaces Using Ag Nanoparticle Modified PDMS as Surface-Enhanced Raman Spectroscopy Substrate

Malathion, phoxim, and thiram are organophosphates and organosulfur pesticides widely used in agricultural products. The residues of these pesticides present a direct threat to human health. Rapid and on-site detection is critical for minimizing such risks. In this work, a simple approach was introduced using a flexible surface-enhanced Raman spectroscopy (SERS) substrate. The prepared Ag nanoparticles-polydimethylsiloxane (AgNPs-PDMS) substrate showed high SERS activity, good precision (relative standard deviation = 5.33%), and stability (30 days) after optimization. For target pesticides, the linear relationship between characteristic SERS bands and concentrations were achieved in the range of 10~1000, 100~5000, and 50~5000 μg L^-1 with LODs down to 3.62, 41.46, and 15.69 μg L^-1 for thiram, malathion, and phoxim, respectively. Moreover, SERS spectra of mixed samples indicated that three pesticides can be identified simultaneously, with recovery rates between 96.5 ± 3.3% and 118.9 ± 2.4%, thus providing an ideal platform for detecting more than one target. Pesticide residues on orange surfaces can be simply determined through swabbing with the flexible substrate before acquiring the SERS signal. This study demonstrated that the prepared substrate can be used for the rapid detection of pesticides on real samples. Overall, this method greatly simplified the pre-treatment procedure, thus serving as a promising analytical tool for rapid and nondestructive screening of malathion, phoxim, and thiram on various agricultural products.

Review of Thin-Layer Chromatography Tandem with Surface-Enhanced Raman Spectroscopy for Detection of Analytes in Mixture Samples

In the real world, analytes usually exist in complex systems, and this makes direct detection by surface-enhanced Raman spectroscopy (SERS) difficult. Thin layer chromatography tandem with SERS (TLC-SERS) has many advantages in analysis such as separation effect, instant speed, simple process, and low cost. Therefore, the TLC-SERS has great potential for detecting analytes in mixtures without sample pretreatment. The review demonstrates TLC-SERS applications in diverse analytical relevant topics such as environmental pollutants, illegal additives, pesticide residues, toxic ingredients, biological molecules, and chemical substances. Important properties such as stationary phase, separation efficiency, and sensitivity are discussed. In addition, future perspectives for improving the efficiency of TLC-SERS in real sample detecting are outlined.

In-Situ SERS Detection of Hg2+/Cd2+ and Congo Red Adsorption Using Spiral CNTs/Brass Nails

Brass spiral nails were functionalized with CoFe₂O₄ nanoparticles and utilized as a substrate for the growth of extremely long CNTs with helical structures and diameters smaller than 20 nm. Different methods were used to characterize the grown CNTs' structures and morphologies. The characteristic Raman peaks of CNTs were amplified four times after being uploaded on the spiral nail, making the substrates for surface-enhanced Raman spectroscopy (SERS) more sensitive. To detect Hg²⁺ and Cd²⁺ at concentrations ranging from 1 to 1000 ppb, a CNT/spiral brass nail was used as a SERS substrate. The proposed sensor demonstrated high sensitivity and selectivity between these heavy metal ions. As a result, the proposed CNTs/spiral brass sensor can be an effective tool for identifying heavy metal ions in aqueous solutions. In addition, Congo red (CR) adsorption as a function of initial dye concentration and contact time was investigated. For CR dye solutions with concentrations of 5, 10, and 20 mg/L, respectively, the highest removal percentage was determined to be ~99.9%, 85%, and 77%. According to the kinetics investigation, the pseudo-first-order and pseudo-second-order models effectively handle CR adsorption onto CNTs/spiral nails. The increase in the dye concentration from 5 ppm to 20 ppm causes the rate constant to drop from 0.053 to 0.040 min^-1. Therefore, our sample can be employed for both the effective degradation of CR dye from wastewater and the detection of heavy metals.

Rapid Immobilization of Silver Nanoparticles via Amino-quinone Coatings Enables Surface-Enhanced Raman Scattering Detection

Immobilization of metal nanoparticles (NPs) on flexible substrates for surface-enhanced Raman scattering (SERS) has received great attention. Anchoring NPs on substrates generally involves the process of surface modification, thanks to its simple, universal, and nondestructive features. 2-Hydroxy-1,4-naphthoquinone (HNQ), a plant-derived compound used to dye hairs and nails, may interact with polyamine or metal ions to form a surface coating. Here, we report the formation of amino-quinone coatings via the co-deposition of HNQ and polyethyleneimine, which provides a functionalized platform to rapidly immobilize Ag NPs on substrates such as a poly(dimethylsiloxane) (PDMS) film to fabricate Ag-PDMS substrates for SERS detection. The detection concentrations are down to 10^-8 M for rhodamine 6G. This work expands the system of surface co-deposition and further provides a facile route to prepare a highly efficient SERS substrate.

A Critical Review for Real-Time Continuous Soil Monitoring: Advantages, Challenges, and Perspectives

Most soil quality measurements have been limited to laboratory-based methods that suffer from time delay, high cost, intensive labor requirement, discrete data collection, and tedious sample pretreatment. Real-time continuous soil monitoring (RTCSM) possesses a great potential to revolutionize field measurements by providing first-hand information for continuously tracking variations of heterogeneous soil parameters and diverse pollutants in a timely manner and thus enable constant updates essential for system control and decision-making. Through a systematic literature search and comprehensive analysis of state-of-the-art RTCSM technologies, extensive discussion of their vital hurdles, and sharing of our future perspectives, this critical review bridges the knowledge gap of spatiotemporal uninterrupted soil monitoring and soil management execution. First, the barriers for reliable RTCSM data acquisition are elucidated by examining typical soil monitoring techniques (e.g., electrochemical and spectroscopic sensors). Next, the prevailing challenges of the RTCSM sensor network, data transmission, data processing, and personalized data management are comprehensively discussed. Furthermore, this review explores RTCSM data application for updating diverse strategies including high-fidelity soil process models, control methodologies, digital soil mapping, soil degradation, food security, and climate change mitigation. Finally, the significance of RTCSM implementation in agricultural and environmental fields is underscored through illuminating future directions and perspectives in this systematic review.

Comparison of Glyphosate Detection by Surface-Enhanced Raman Spectroscopy Using Gold and Silver Nanoparticles at Different Laser Excitations

Glyphosate is one of the most widely used pesticides in the world, but it has been shown to persist in the environment and therefore needs to be detected in food. In this work, the detection of glyphosate by surface-enhanced Raman scattering (SERS) using gold and silver nanoparticles and three different commonly used laser excitations (532, 632, and 785 nm wavelengths) of a Raman microscope complemented with a portable Raman spectrometer with 785 nm excitation is compared. The silver and gold nanosphere SERS substrates were prepared by chemical synthesis. In addition, colorimetric detection of glyphosate using cysteamine-modified gold and silver nanoparticles was also tested. The best results were obtained with Ag NPs at 532 nm excitation with a detection limit of 1 mM and with Au nanoparticles at 785 nm excitation with a detection limit of 100 µM. The SERS spectra of glyphosate with cysteamine-modified silver NPs improved the detection limits by two orders of magnitude for 532 nm excitation, i.e., up to 10 µM, and by one order of magnitude for 632 and 785 nm excitation wavelengths.

Detailed Investigation of Factors Affecting the Synthesis of SiO2@Au for the Enhancement of Raman Spectroscopy

The reaction time, temperature, ratio of precursors, and concentration of sodium citrate are known as the main factors that affect the direct synthesis process of SiO₂@Au based on the chemical reaction of HAuCl4 and sodium citrate. Hence, we investigated, in detail, and observed that these factors played a crucial role in determining the shape and size of synthesized nanoparticles. The significant enhancement of the SERS signal corresponding to the fabrication conditions is an existing challenge. Our study results show that the optimal reaction conditions for the fabrication of SiO₂@Au are a 1:21 ratio of HAuCl₄ to sodium citrate, with an initial concentration of sodium citrate of 4.2 mM, and a reaction time lasting longer than 6 h at a temperature of 80 °C. Under optimal conditions, our synthesis process result is SiO₂@Au nanoparticles with a diameter of approximately 350 nm. In particular, the considerable enhancement of Raman intensities of SiO₂@Au compared to SiO₂ particles was examined.

Recent Advances in Silver Nanostructured Substrates for Plasmonic Sensors

Noble metal nanostructures are known to confine photon energies to their dimensions with resonant oscillations of their conduction electrons, leading to the ultrahigh enhancement of electromagnetic fields in numerous spectroscopic methods. Of all the possible plasmonic nanomaterials, silver offers the most intriguing properties, such as best field enhancements and tunable resonances in visible-to-near infrared regions. This review highlights the recent developments in silver nanostructured substrates for plasmonic sensing with the main emphasis on surface plasmon resonance (SPR) and surface-enhanced Raman spectroscopy (SERS) over the past decade. The main focus is on the synthesis of silver nanostructured substrates via physical vapor deposition and chemical synthesis routes and their applications in each sensing regime. A comprehensive review of recent literature on various possible silver nanostructures prepared through these methodologies is discussed and critically reviewed for various planar and optical fiber-based substrates.

Highly sensitive and reproducible CNTs@Ag modified Flower-Like silver nanoparticles for SERS situ detection of transformer Oil-dissolved furfural

Accurately evaluating the aging state of oil paper insulation in electrical equipment is a key to ensure the safe operation of the power transformer. For achieving highly sensitive in-situ detection of dissolved furfural in transformer oil with good reproducibility, flower-like silver nanoparticles modified with carbon nanotubes (CNTs@Ag-F-AgNPs) was synthesized by a combination of electroless silver plating and redox method. The large specific surface area and strong adsorption capacity of CNTs@Ag promoted the formation of more "hot spots". CNTs@Ag-F-AgNPs were adsorbed on Si-Au substrate via mercapto groups on the coupling agent 1'4 phenyldimercaptan molecule (BDT). Using rhodamine 6G (R6G) as probe molecule, the enhanced factor reached 6.96 × 10⁹. Then, the substrate was used for in-situ SERS detection of transformer oil-dissolved furfural at different concentrations and the detection limit was 2.25 mg/L at 1703 cm^-1 (Stretching vibration of C = O in furfural molecule), fulfilling requirements of furfural content detection after severe aging of transformer (4 mg/L). Besides, the relative standard deviation (RSD) of characteristic peak intensity at ten different positions was only 1.74%. These results exhibite that three-dimensional nanostructure with high sensitivity and good reproducibility exhibited a wide application range for in situ detection of dissolved trace furfural in transformer oil.

Electrochemical Aptasensors for Antibiotics Detection: Recent Achievements and Applications for Monitoring Food Safety

Antibiotics are often used in human and veterinary medicine for the treatment of bacterial diseases. However, extensive use of antibiotics in agriculture can result in the contamination of common food staples such as milk. Consumption of contaminated products can cause serious illness and a rise in antibiotic resistance. Conventional methods of antibiotics detection such are microbiological assays chromatographic and mass spectroscopy methods are sensitive; however, they require qualified personnel, expensive instruments, and sample pretreatment. Biosensor technology can overcome these drawbacks. This review is focused on the recent achievements in the electrochemical biosensors based on nucleic acid aptamers for antibiotic detection. A brief explanation of conventional methods of antibiotic detection is also provided. The methods of the aptamer selection are explained, together with the approach used for the improvement of aptamer affinity by post-SELEX modification and computer modeling. The substantial focus of this review is on the explanation of the principles of the electrochemical detection of antibiotics by aptasensors and on recent achievements in the development of electrochemical aptasensors. The current trends and problems in practical applications of aptasensors are also discussed.

A comprehensive review on LED-induced fluorescence in diagnostic pathology

Sensitivity, specificity, mobility, and affordability are important criteria to consider for developing diagnostic instruments in common use. Fluorescence spectroscopy has been demonstrating substantial potential in the clinical diagnosis of diseases and evaluating the underlying causes of pathogenesis. A higher degree of device integration with appropriate sensitivity and reasonable cost would further boost the value of the fluorescence techniques in clinical diagnosis and aid in the reduction of healthcare expenses, which is a key economic concern in emerging markets. Light-emitting diodes (LEDs), which are inexpensive and smaller are attractive alternatives to conventional excitation sources in fluorescence spectroscopy, are gaining a lot of momentum in the development of affordable, compact analytical instruments of clinical relevance. The commercial availability of a broad range of LED wavelengths (255-4600 nm) has opened up new avenues for targeting a wide range of clinically significant molecules (both endogenous and exogenous), thereby diagnosing a range of clinical illnesses. As a result, we have specifically examined the uses of LED-induced fluorescence (LED-IF) in preclinical and clinical evaluations of pathological conditions, considering the present advancements in the field.

Prospects of Surface-Enhanced Raman Spectroscopy for Biomarker Monitoring toward Precision Medicine

Future precision medicine will be undoubtedly sustained by the detection of validated biomarkers that enable a precise classification of patients based on their predicted disease risk, prognosis, and response to a specific treatment. Up to now, genomics, transcriptomics, and immunohistochemistry have been the main clinically amenable tools at hand for identifying key diagnostic, prognostic, and predictive biomarkers. However, other molecular strategies, including metabolomics, are still in their infancy and require the development of new biomarker detection technologies, toward routine implementation into clinical diagnosis. In this context, surface-enhanced Raman scattering (SERS) spectroscopy has been recognized as a promising technology for clinical monitoring thanks to its high sensitivity and label-free operation, which should help accelerate the discovery of biomarkers and their corresponding screening in a simpler, faster, and less-expensive manner. Many studies have demonstrated the excellent performance of SERS in biomedical applications. However, such studies have also revealed several variables that should be considered for accurate SERS monitoring, in particular, when the signal is collected from biological sources (tissues, cells or biofluids). This Perspective is aimed at piecing together the puzzle of SERS in biomarker monitoring, with a view on future challenges and implications. We address the most relevant requirements of plasmonic substrates for biomedical applications, as well as the implementation of tools from artificial intelligence or biotechnology to guide the development of highly versatile sensors.

Plasmonic Metasurfaces for Specific SERS Detection of Shiga Toxins

The interest in the development of nanoscale plasmonic technologies has dramatically increased in recent years. The photonic properties of plasmonic nanopatterns can be controlled and tuned via their size, shape, or the arrangement of their constituents. In this work, we propose a 2D hybrid metallic polymeric nanostructure based on the octupolar framework with enhanced sensing property. We analyze its plasmonic features both numerically and experimentally, demonstrating the higher values of their relevant figures of merit: we estimated a surface-enhanced Raman spectroscopy (SERS) enhancement factor of 9 × 10⁷ and a SPR bulk sensitivity of 430 nm/RIU. In addition, our nanostructure exhibits a dual resonance in the visible and near-infrared region, enabling our system toward multispectral plasmonic analysis. Finally, we illustrate our design engineering strategy as enabled by electron beam lithography by the outstanding performance of a SERS-based biosensor that targets the Shiga toxin 2a, a clinically relevant bacterial toxin. To the best of our knowledge, this is the first time that a SERS fingerprint of this toxin has been evidenced.

Highly sensitive SERS substrates with multi-hot spots for on-site detection of pesticide residues

Pesticide residues will be a huge threat to food security and ecological environment; therefore, there is an urgent need to achieve rapid and on-site detection of pesticide residues. Herein, a plasmonic substrate with multiple "hot spots" was fabricated by transferring three-dimensional (3D) Au nanoparticles (NPs) onto the polydimethylsiloxane (PDMS) membrane for highly sensitive surface-enhanced Raman scattering (SERS) detection of pesticide residues. In combination with 3D-FDTD simulations, high SERS enhancement (EF = 1.2 × 10⁸) and high detection sensitivity (LOD = 6.3 × 10^-10 M) were achieved, mainly due to the enhanced electromagnetic fields around the "hot spots". Additionally, the PDMS-based SERS substrate held good transparency and flexibility, enabling conformal contact with non-planar surfaces and allowing the laser to penetrate the back of the analytes. Combined with a portable Raman spectrometer, the substrates holds great potential for rapid, high-sensitive, and on-site detection of contaminants in food, especially for the analyte on the nonplanar surfaces.

Preparation of Fe3O4@PDA@Au@GO Composite as SERS Substrate and Its Application in the Enrichment and Detection for Phenanthrene

In this study, highly active Fe₃O₄@PDA@Au@GO surface-enhanced Raman spectroscopy (SERS) active substrate was synthesized for application in the enrichment and detection of trace polycyclic aromatic hydrocarbons (PAHs) in the environment. The morphology and structure were characterized by transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and UV–visible absorption spectrum (UV–vis spectra). The effect of each component of Fe₃O₄@PDA@Au@GO nanocomposites on SERS was explored, and it was found that gold nanoparticles (Au NPs) are crucial to enhance the Raman signal based on the electromagnetic enhancement mechanism, and apart from enriching the PAHs through π–π interaction, graphene oxide (GO) also generates strong chemical enhancement of Raman signals, and polydopamine (PDA) can prevent Au from shedding and agglomeration. The existence of Fe3O4 aided the quick separation of substrate from the solutions, which greatly simplified the detection procedure and facilitated the reuse of the substrate. The SERS active substrate was used to detect phenanthrene in aqueous solution with a detection limit of 10⁻⁷ g/L (5.6 × 10⁻¹⁰ mol/L), which is much lower than that of ordinary Raman, it is promising for application in the enrichment and detection of trace PAHs.

Molecular–substrate interaction on dynamic SERS detection of butylated hydroxyanisole on a silver nano-tripod substrate

A SERS enhancement model with a surface adsorption effect is proposed by dynamical SERS analysis of butylated hydroxyanisole on a silver nano-tripod substrate.

Nanotechnology in food and water security: on-site detection of agricultural pollutants through surface-enhanced Raman spectroscopy

Agricultural pollutants are harmful components threatening human health, wildlife, the environment, and the ecosystem. To avoid their exposure, developing prevention and detection systems with high sensitivity and selectivity is required. Most conventional methods, including molecular and chromatographic techniques, cannot be adopted for outdoor on-site detection even though they can provide sensitive and selective detection. Thus, detection platforms that can provide on-site detection via miniaturized and high throughput systems should be developed. As an alternative method, surface-enhanced Raman scattering (SERS) provides unique information about the substances in the presence of plasmonic nanostructures, and it can be portable with the use of portable detection systems and spectrometers. In this study, on-site detection of agricultural pollutants through SERS is reviewed. Three different types of agricultural pollutants were pointed out. On-site detection of biological pollutants, including bacteria and viruses, is reviewed as the first type of pollutant. As a second type, the detection of pesticides, antibiotics, and additives are focused on as chemical pollutants. The third group includes the detection of microplastics and also nanoparticles from the environment.

Plasmonic Spherical Nanoparticles Coupled with Titania Nanotube Arrays Prepared by Anodization as Substrates for Surface-Enhanced Raman Spectroscopy Applications: A Review

As surface-enhanced Raman spectroscopy (SERS) continues developing to be a powerful analytical tool for several probes, four important aspects to make it more accessible have to be addressed: low-cost, reproducibility, high sensibility, and recyclability. Titanium dioxide nanotubes (TiO₂ NTs) prepared by anodization have attracted interest in this field because they can be used as safe solid supports to deposit metal nanoparticles to build SERS substrate nanoplatforms that meet these four desired aspects. TiO₂ NTs can be easily prepared and, by varying different synthesis parameters, their dimensions and specific features of their morphology can be tuned allowing them to support metal nanoparticles of different sizes that can achieve a regular dispersion on their surface promoting high enhancement factors (EF) and reproducibility. Besides, the TiO₂ photocatalytic properties enable the substrate's self-cleaning property for recyclability. In this review, we discuss the different methodological strategies that have been tested to achieve a high performance of the SERS substrates based on TiO₂ NTs as solid support for the three main noble metal nanoparticles mainly studied for this purpose: Ag, Au, and Pt.

Molecular trace detection in liquids using refocusing optical feedback by a silver-coated capillary

Surface-enhanced Raman scattering (SERS) has been widely used owing to its high sensitivity and rapid response. In particular, 3D SERS-active platforms greatly extend the interaction area and ensure the ability to directly detect trace amounts of molecules in liquids. A silver-coated capillary, with the ability of liquid sampling and light guiding, provides a new platform for high-performance SERS substrates. In this paper, the silver mirror reaction was used for coating silver on the outer wall of the capillary. PDMS was used as a coating material to protect the silver film. Because of the silver coating, Mie scattering and Raman scattering in the liquid channel can be refocused and reflected back which greatly reduces the propagation loss and extends the interaction length. An enhancement factor as high as 10⁸ and a detection limit of 10^-10 M of rhodamine 6G in aqueous solution have been achieved. Moreover, the SERS intensity is homogeneous across the end face of the liquid channel, with the relative standard deviation (RSD) value changing within 7%. The large area and high homogeneity greatly reduce the requirement of light coupling precision and liquid injection pressure. Using a common flange optical fiber connector, the capillary can be simply connected and aligned with a multimode fiber with a detection limit of 10^-8 M. The experiment results show great potential for the development of an optofluidic integrated system in the future.

Bimetallic Ag-Cu Alloy Microflowers as SERS Substrates with Single-Molecule Detection Limit

Bimetallic Ag-Cu alloy microflowers with tunable surface compositions were fabricated as surface-enhanced Raman spectroscopy (SERS) substrates with a limit of detection in the zeptomolar range for the analyte molecule rhodamine 6G (R6G). The substrates were prepared on a glass coverslip through a bottom-up strategy by simple thermolysis of metal-alkyl ammonium halide precursors. The reaction temperature and composition of the alloy were varied sequentially to find out the maximum SERS efficiency from the substrates. While UV-vis spectroscopy was employed to characterize the optical properties of the substrates, the bulk and surface compositions of the microflowers were determined using energy-dispersive X-ray fluorescence (ED-XRF) and X-ray photoelectron spectroscopy (XPS) techniques, respectively. Also, the structural and morphological characterizations of the substrates were performed by X-ray diffraction and scanning electron microscope (SEM), respectively. For alloys, the ED-XRF studies confirmed that the bulk compositions matched with the feed ratio, while the surface compositions were found to be rich in copper in the form of both elementary copper and copper oxide, as revealed by XPS studies. From the efficiency studies for different compositions prepared, it was found that 10% Ag-Cu alloy microflowers produced the maximum SERS intensity for resonant R6G molecules as probes. In fact, R6G evidences a 50-fold enhancement in SERS spectra with 10% alloy microflowers as against pure Ag microflowers. Using 1, 2, 3-benzotriazole as a nonresonant Raman probe, uniform enhancement factors on the order of ≈10⁸ were achieved from different parts of the 10% Ag-Cu alloy microflower. The same substrate showed excellent Raman response for detecting R6G at very low concentrations such as 10 zM, leading to detection and analysis of SERS spectra from a single R6G molecule.

Development of shipboard automatic flow injection analysis-Surface-enhanced Raman spectroscopy instrument toward onsite detection of trace polycyclic aromatic hydrocarbons in water environment

The qualitative and quantitative analysis of polycyclic aromatic hydrocarbons (PAHs) has been important for the environmental control of persistent organic pollutants for decades. Considering the potential risk of deterioration, degradation, and external pollution during transportation, the development of rapid and onsite detection of trace PAHs is in demand. Here, taking the advantage of high sensitivity of surface-enhanced Raman spectroscopy (SERS), we developed a shipboard instrument by combining a portable Raman instrument and a flow injection device, integrating the sample pretreatment and target detection step by step. The feasibility of the instrument was demonstrated by detecting trace benzo[a]pyrene from different water environments with the lowest detection concentration less than 1 µg/l. The reliable stability and repeatability indicate that in the case of emergency response, the developed flow injection analysis-SERS instrument is very promising for the quantitative and qualitative analysis of diverse organic pollutants other than PAHs in water environments.

Evaluating the detection efficacy of advanced bimetallic plasmonic nanoparticles for heavy metals, hazardous materials and pesticides of leachate in contaminated groundwater

During the decomposition of trashes, leachate is created and leaching is gradually pollutes the surface and groundwater. Thus, the most severe ecological impact is the risk of ground water pollution because of collection of leachate from unlined insecure landfills. Due to the low biodegradable organic strength, irregular productivity and composition, the environmentally neglected landfill leachate treatment is challenging. This work was conducted on a synthetically effective bimetallic surface enhanced Raman spectroscopic (SERS) nanosensor by gold/silver-bimetallic nanoparticles (Au/Ag-NPs), and used for the specific detection of municipal solid waste (MSW) landfill leachate in groundwater. The optical study of Au/Ag-NPs led to reflections from Ag cores and small Au shells. The structural studies represent the FCC structure of Au/Ag-NPs. The core-shell nanocrevice NPs with particle size of 23 nm played an important role with plasmonic behaviour enhances the electromagnetic excitation to achieve SERS detection and plasmonic photocatalysis. Thus, obtained results clearly show that Au was successfully added to Ag-NPs, and its existence can also be confirmed by energy dispersive spectroscopy (EDAX). The prepared SERS based sensors have the potential to detect aromatic hydrocarbon, pesticides and heavy metals from environmentally ignored MSW landfill leachate. In general, the application of this new synergetic strategy of the photocatalytic degradation of leachate was irradiated by visible wavelength with the rate constant of 0.0036/min, 0.0047/min and 0.005/min by Ag-NPs, Au-NPs and Au/Ag-NPs respectively. Overall, this is the only study achieved efficiently with photocatalytic degradation and SERS detection of environmentally ignored real sample (leachate) to make pollutant free homeland aquifers.

Application of Laser-Induced, Deep UV Raman Spectroscopy and Artificial Intelligence in Real-Time Environmental Monitoring-Solutions and First Results

Environmental monitoring of aquatic systems is the key requirement for sustainable environmental protection and future drinking water supply. The quality of water resources depends on the effectiveness of water treatment plants to reduce chemical pollutants, such as nitrates, pharmaceuticals, or microplastics. Changes in water quality can vary rapidly and must be monitored in real-time, enabling immediate action. In this study, we test the feasibility of a deep UV Raman spectrometer for the detection of nitrate/nitrite, selected pharmaceuticals and the most widespread microplastic polymers. Software utilizing artificial intelligence, such as a convolutional neural network, is trained for recognizing typical spectral patterns of individual pollutants, once processed by mathematical filters and machine learning algorithms. The results of an initial experimental study show that nitrates and nitrites can be detected and quantified. The detection of nitrates poses some challenges due to the noise-to-signal ratio and background and related noise due to water or other materials. Selected pharmaceutical substances could be detected via Raman spectroscopy, but not at concentrations in the µg/l or ng/l range. Microplastic particles are non-soluble substances and can be detected and identified, but the measurements suffer from the heterogeneous distribution of the microparticles in flow experiments.

A SERS-active capillary for direct molecular trace detection in liquids

The development of Surface Enhanced Raman Scattering (SERS) promotes the wide application of Raman spectroscopy in chemical and biomolecular detection. SERS detection relies on analytes in close contact with the metallic surface, and therefore direct molecular trace detection in the liquid phase is difficult. In this paper, static liquid phase SERS detection was performed simply using a capillary without pre-functionalization. Gold nanoparticles (AuNPs) with an optimized size ensure localized surface plasmons in resonance with the exciting laser light. Grazing incidence and multimode interference in the capillary ensure that the longitudinal Raman signal is effectively excited and accumulated. An enhancement factor as high as 10⁸ and a detection limit of 10^-9 M of crystal violet in aqueous solution have been achieved.

Synthesis and characterization of plasmonic peptoid nanosheets

Solvated two-dimensional (2D) arrays of gold nanoparticles (AuNPs) are versatile plasmonic materials that are not limited by the constraints of a solid support. We report here the assembly of AuNP-embedded peptoid nanosheets via monolayer collapse at the liquid-liquid interface. This synthesis route produces a new class of solvated 2D plasmonic arrays and has the potential to be extended to a variety of different nanoparticle systems.

A facile solvent extraction method facilitating surface-enhanced Raman spectroscopic detection of ochratoxin A in wine and wheat

The capability of a solvent-mediated liquid-liquid extraction (LLE) method to improve the detection of ochratoxin A (OTA) in food matrixes using surface-enhanced Raman spectroscopy (SERS) is described. SERS detection of mycotoxins with nanoparticle aggregation is a simple method but with low reproducibility due to the heterogeneous distribution of the nanoparticle aggregates. We evaluated three different LLE protocols to analyze their performance in combination with SERS. A facile extraction method based on sample acidification and addition of chloroform as a separation solvent showed to not only extract OTA from wine and wheat but also facilitate the uniform distribution of the nanoparticles leading to an improvement of the detection signals and the reproducibility. This method enables rapid and simple analysis of mycotoxin Ochratoxin A in food systems.

Recent progresses and remaining challenges for the detection of Zika virus

Zika virus (ZIKV) has emerged as a particularly notorious mosquito-borne flavivirus, which can lead to a devastating congenital syndrome in the fetuses of pregnant mothers (e.g., microcephaly, spasticity, craniofacial disproportion, miscarriage, and ocular abnormalities) and cause the autoimmune disorder Guillain-Barre' syndrome of adults. Due to its severity and rapid dispersal over several continents, ZIKV has been acknowledged to be a global health concern by the World Health Organization. Unfortunately, the ZIKV has recently resurged in India with the potential for devastating effects. Researchers from all around the world have worked tirelessly to develop effective detection strategies and vaccines for the prevention and control of ZIKV infection. In this review, we comprehensively summarize the most recent research into ZIKV, including the structural biology and evolution, historical overview, pathogenesis, symptoms, and transmission. We then focus on the detection strategies for ZIKV, including viral isolation, serological assays, molecular assays, sensing methods, reverse transcription loop mediated isothermal amplification, transcription-mediated amplification technology, reverse transcription strand invasion based amplification, bioplasmonic paper-based device, and reverse transcription isothermal recombinase polymerase amplification. To conclude, we examine the limitations of currently available strategies for the detection of ZIKV, and outline future opportunities and research challenges.

Strategies for SERS Detection of Organochlorine Pesticides

Organochlorine pesticides (OCPs) embody highly lipophilic hazardous chemicals that are being phased out globally. Due to their persistent nature, they are still contaminating the environment, being classified as persistent organic pollutants (POPs). They bioaccumulate through bioconcentration and biomagnification, leading to elevated concentrations at higher trophic levels. Studies show that human long-term exposure to OCPs is correlated with a large panel of common chronic diseases. Due to toxicity concerns, most OCPs are listed as persistent organic pollutants (POPs). Conventionally, separation techniques such as gas chromatography are used to analyze OCPs (e.g., gas chromatography coupled with mass spectrometry (GC/MS)) or electron capture detection (GC/ECD). These are accurate, but expensive and time-consuming methods, which can only be performed in centralized lab environments after extensive pretreatment of the collected samples. Thus, researchers are continuously fueling the need to pursue new faster and less expensive alternatives for their detection and quantification that can be used in the field, possibly in miniaturized lab-on-a-chip systems. In this context, surface enhanced Raman spectroscopy (SERS) represents an exceptional analytical tool for the trace detection of pollutants, offering molecular fingerprint-type data and high sensitivity. For maximum signal amplification, two conditions are imposed: an efficient substrate and a high affinity toward the analyte. Unfortunately, due to the highly hydrophobic nature of these pollutants (OCPs,) they usually have a low affinity toward SERS substrates, increasing the challenge in their SERS detection. In order to overcome this limitation and take advantage of on-site Raman analysis of pollutants, researchers are devising ingenious strategies that are synthetically discussed in this review paper. Aiming to maximize the weak Raman signal of organochlorine pesticides, current practices of increasing the substrate's performance, along with efforts in improving the selectivity by SERS substrate functionalization meant to adsorb the OCPs in close proximity (via covalent, electrostatic or hydrophobic bonds), are both discussed. Moreover, the prospects of multiplex analysis are also approached. Finally, other perspectives for capturing such hydrophobic molecules (MIPs-molecularly imprinted polymers, immunoassays) and SERS coupled techniques (microfluidics-SERS, electrochemistry-SERS) to overcome some of the restraints are presented.

Surface-Enhanced Raman Scattering Sensing of Transition Metal Ions in Waters

In this mini-review, we provide a coherent discussion on the sensing schemes exploited in the surface-enhanced Raman scattering (SERS) analysis of transition metal ions in waters. A critical approach was used where illustrative examples are selected to discuss key drawbacks and challenges associated with various experimental configurations and the employed enhancing substrates.

Detection of Mycotoxins in Food Using Surface-Enhanced Raman Spectroscopy: A Review

Mycotoxins are toxic metabolites produced by fungi that contaminate many important crops worldwide. Humans are commonly exposed to mycotoxins through the consumption of contaminated food products. Mycotoxin contamination is unpredictable and unavoidable; it occurs at any point in the food production system under favorable conditions, and they cannot be destroyed by common heat treatments, because of their high thermal stability. Early and fast detection plays an essential role in this unique challenge to monitor the presence of these compounds in the food chain. Surface-enhanced Raman spectroscopy (SERS) is an advanced spectroscopic technique that integrates Raman spectroscopic molecular fingerprinting and enhanced sensitivity based on nanotechnology to meet the requirement of sensitivity and selectivity, but that can also be performed in a cost-effective and straightforward manner. This Review focuses on the SERS methodologies applied to date for qualitative and quantitative analysis of mycotoxins based on a variety of SERS substrates, as well as our perspectives on current limitations and future trends for applying this technique to mycotoxin analyses.

An overview of surface-enhanced Raman scattering substrates by pulsed laser deposition technique: fundamentals and applications

Metallic nanoparticles (NPs), as an efficient substrate for surface-enhanced Raman scattering (SERS), attract much interests because of their various shapes and sizes. The appropriate size and morphology of metallic NPs are critical to serve as the substrate for achieving an efficient SERS. Pulsed laser deposition (PLD) is one of the feasible physical methods employed to synthesize metallic NPs with controllable sizes and surface characteristics. It has been recognized to be a successful tool for the deposition of SERS substrates due to its good controllability and high reproducibility in the manufacture of metallic NPs. This review provides an overview about the recent advances for the preparation of SERS substrates by PLD technique. The influences of parameters on the sizes and morphologies of metallic NPs during the deposition processes in PLD technique including laser output parameters, gas medium, liquid medium, substrate temperature, and properties of 3D substrate are presented. The applications of SERS substrates produced by PLD in the environmental monitoring and biomedical analysis are summarized. This knowledge could serve as a guideline for the researchers in exploring further applications of PLD technique in the production of SERS substrate.