Liquid phase microextraction of pesticides: a review on current methods

Introduction of an electrospun nanofibrous membrane incorporated by metal-organic framework-199 (MOF-199) with Lewis acid property for efficient extraction of sulfonamides in on-chip electromembrane extraction

In this study, a new supporting polymeric membrane having Lewis acid nature was introduced for immobilizing organic solvent in on-chip electromembrane extraction (on-chip EME). For this aim, a polymeric nanofibrous membrane incorporated by a copper based metal-organic framework (MOF-199), with coordinatively unsaturated metal sites and Lewis acid property, was prepared by electrospinning a mixture of polycaprolactone (PCL) and MOF-199. Based on the field emission scanning electron microscopy images, the obtained polymeric membrane consisted of intertwined nanofibers having empty space between the fibers which could provide a suitable place for immobilizing the organic solvent. To demonstrate remarkable extractability of the proposed membrane (PCL/MOF-199 nanofibers) via executing Lewis acid-base interactions, three sulfonamide drugs was selected as anionic polar analytes with Lewis base feature. The parameters affecting the extraction efficiency of the method were optimized through the experimental design method using the orthogonal and rotatable central composite design (CCD). Under optimum conditions, the extraction recoveries ranging from 35.5 to 71.2 %, the relative standard deviations (RSD%) less than 6.45 %, and the detection limits in the range of 0.2-0.5 μg L-1 were achieved. The comparison of the extraction efficiency of the on-chip EME method using the electrospun PCL/MOF-199 nanofibers and PCL nanofibers membranes indicated that the proposed membrane was more efficient for extraction of sulfonamides because of the significant Lewis acid-base interactions of sulfonamides with copper uncoordinated open sites in MOF-199. Finally, the performance of the proposed method for extraction and determination of sulfonamides in three real samples was assayed.

In-situ formation of the adsorbent based on octadecylamine for the extraction of Ag+ ions from aqueous solutions and its determination by microinjection flame atomic absorption spectrometry

In this research, a dispersive solid phase extraction procedure based on changing the solubility of octadecylamine with pH was proposed to determine Ag+ ions in different water samples. For this purpose, first, the pH of sample solution containing the analyte was adjusted to 10.5. Then desired volume of the octadecylamine dissolved in acidic solution was injected into the solution. Because of the low solubility of octadecylamine in alkaline solution, a cloudy state was formed. The produced octadecylamine particles acted as a complexing agent for Ag+ ions and adsorbent for the formed complex. The obtained cloudy solution was centrifuged and the sedimented particles were removed and dissolved in a diluted nitric acid solution. It was injected into a flame atomic absorption spectrometry to determine the extracted amounts of the analyte. The effect of important parameters such as the amount of octadecylamine, volume of nitric acid, and centrifugation and vortexing conditions on the extraction efficiency of the procedure was studied and optimized. In optimal conditions, the developed method showed a linear range of 0.50-200 µg L-1. The limits of detection and quantification were 0.18 and 0.50 µg L-1, respectively. Extraction recovery was 93.6%. The relative standard deviations were less than 4%. The effectiveness of the method was investigated by determination of Ag+ ions in water and wastewater samples.

In situ formation of chloroform for dispersive liquid-liquid microextraction of some aromatic amines from aqueous samples optimized by central composite design prior to GC-MS analysis

In the current research, an in situ solvent formation-liquid phase microextraction method based on chloroform has been introduced as an efficient sample preparation procedure and applied for the extraction and preconcentration of some aromatic amines from wastewaters. In this method, chloral hydrate (2,2,2-trichloroethane-1,1-diol) was added to an alkaline solution of the samples in order to form chloroform as an extraction solvent in the sample solution. Thus, the selected analytes were transferred from the aqueous solution into the tiny droplets of the produced chloroform. Following this, the extracted and enriched analytes were quantified using a gas chromatograph-mass spectrometer. Experimental conditions of the proposed method including the chloral hydrate amount, salt effect, extraction time, and sodium hydroxide concentration were studied and optimized by a central composite design approach. By the offered method, high enrichment factors (292-324) with satisfactory extraction recoveries (82-91%), low limits of detection (0.26-0.39 ng mL^-1), and proper repeatability (relative standard deviations ≤6.3% for intra- and inter-day precisions) were achieved under optimum conditions. Eventually, the suggested method was assessed through the quantification of aromatic amines in aqueous samples.

Review of extraction and detection techniques for the analysis of pesticide residues in fruits to evaluate food safety and make legislative decisions: Challenges and anticipations

Fruits are vital parts of the human diet because they include necessary nutrients that the body needs. Pesticide use has increased dramatically in recent years to combat fruit pests across the world. Pesticide usage during production, on the other hand, frequently results in undesirable residues in fruits after harvest. Consumers are concerned about pesticide residues since most of the fruits are directly consumed and even recommended for the patients as dietary supplements. As a result of this worry, pesticide residues in fruits are being randomly monitored to re-assess the food safety situation and make informed legislative decisions. To assess the degree of pesticide residues in fruits, a simple and quick analytical procedure is usually required. As a result, pesticide residue detection (using various analytical techniques: GC, LC and Biosensors) becomes critical, and regulatory directives are formed to regulate their amounts via the Maximum Residue Limit (MRL). Over the previous two decades, a variety of extraction techniques and analytical methodologies for xenobiotic's efficient extraction, identification, confirmation and quantification have been developed, ranging from traditional to advanced. The goal of this review is to give readers an overview of the evolution of numerous extraction and detection methods for pesticide residue analysis in fruits. The objective is to assist analysts in better understanding how the ever-changing regulatory landscape might drive the need for new analytical methodologies to be developed in order to comply with current standards and safeguard consumers.

Research Advances in the Analysis of Estrogenic Endocrine Disrupting Compounds in Milk and Dairy Products

Milk and dairy products are sources of exposure to estrogenic endocrine disrupting compounds (e-EDCs). Estrogenic disruptors can accumulate in organisms through the food chain and may negatively affect ecosystems and organisms even at low concentrations. Therefore, the analysis of e-EDCs in dairy products is of practical significance. Continuous efforts have been made to establish effective methods to detect e-EDCs, using convenient sample pretreatments and simple steps. This review aims to summarize the recently reported pretreatment methods for estrogenic disruptors, such as solid-phase extraction (SPE) and liquid phase microextraction (LPME), determination methods including gas chromatography-mass spectrometry (GC-MS), liquid chromatography-mass spectrometry (LC-MS), Raman spectroscopy, and biosensors, to provide a reliable theoretical basis and operational method for e-EDC analysis in the future.

Recent modified air-assisted liquid–liquid microextraction applications for medicines and organic compounds in various samples: A review

Air-assisted liquid–liquid microextraction (AALLME) is a procedure for sample preparation that has high recoveries and high preconcentration factors while using a small amount of extractants. This procedure has gained widespread acceptance among scientists due to a variety of advantages, including its easiness, being cheap, green, and available in most laboratories. The current review has focused on the analysis of medicines and organic compounds using various modes of AALLME. The use of various extractants and support factors were developed in many modes of AALLME. A review of literature revealed that the procedure is used as a powerful and efficient approach for extracting medicals and organic compounds. This review explained 12 different types of AALLME methods. The findings on the modifications of AALLME modes that have been published are summarized. Future directions are also being discussed.

Sporopollenin based materials as a versatile choice for the detoxification of environmental pollutants - A review

Before making the transfer to land, plants survive in water for millions of years to avoid the severe circumstances that prevail on lands, such as drought and UV radiation. All land plant spores are coated in sporopollenin, a substance that has developed to endow pollen and spore shells with exceptional, one-of-a-kind qualities. In a nutshell, sporopollenin-coated spores are a unique invention only seen in land plants. Sporopollenin, discovered in the outer exine layer of pollen walls, is a lipid and phenolic-based polymer with high carbon, hydrogen, and oxygen cross-linking. Products based on sporopollenin can remediate toxic pollutant contamination in the aquatic environment. This research and development are now underway. In this review, we show how sporopollenin-based adsorbents act in environmental challenges and their immense promise for this application via remarkable physical and chemical characteristics. A comparison is made of the benefits of various sporopollenin-modified structures. This strategy will further our understanding of how a biopolymer's structure can be accommodated to address emerging environmental challenges, revealing more about sporopollenin's dynamical nature.

An enhanced dispersive liquid–liquid microextraction method based on solidification of floating organic drops for the determination of pyrethroid pesticides in tea infusions

A novel enhanced dispersive liquid–liquid microextraction method based on solidified floating organic solvents containing [P4,4,4,12][PF6] and a hydrophobic solvent mixture for the determination of four pyrethroid insecticides in tea infusions.

Extraction and determination of strobilurin fungicides residues in apple samples using ultrasound-assisted dispersive liquid-liquid microextraction based on a novel hydrophobic deep eutectic solvent followed by H.P.L.C-U.V

In this study, several novel and natural hydrophobic deep eutectic solvents (D.E.Ss) were prepared using methyl trioctylammonium chloride (M.T.O.A.C) as H.B.A and different types of straight chain alcohols as H.B.Ds. One of the D.E.Ss composed of M.T.O.A.C and n-butanol was advantageously used to develop an ultrasound-assisted dispersive liquid-liquid microextraction (U.A-D.L.L.M.E) method combined with high-performance liquid chromatography-ultraviolet detection (H.P.L.C-U.V) for the determination of some strobilurin fungicides in apple samples. Several important parameters influencing extraction efficiency were investigated and optimised, including the type and volume of extractant in ultrasound stage, sonication time, the type and volume of D.E.S, sample solution pH and effect of salt addition. Under optimal experimental conditions, the method showed good linearity with correlation coefficients (R²) of 0.9985 - 0.9991 in the linear range of 4-1500 μg kg^-1, low limits of detection of 1.5-2 μg kg^-1 and acceptable extraction recoveries in the range of 76-92%. Enrichment factor was in the range of 95-115. The proposed method was successfully applied for the extraction and preconcentration of trace fungicides in apple samples, and the results demonstrated the potential of the synthesised D.E.S for the extraction and determination of contaminants in aqueous samples.

Novel hydrophobic deep eutectic solvent for vortex-assisted liquid phase microextraction of common acaricides in fruit juice followed by HPLC-UV determination

In the present research, several novel and natural hydrophobic deep eutectic solvents (DESs) were prepared using methyltrioctylammonium chloride (MTOAC) as the hydrogen bond acceptor (HBA) and different types of straight chain alcohols as hydrogen bond donors (HBDs). One of the DESs composed of MTOAC and n-butanol was advantageously used to develop a vortex-assisted liquid phase microextraction (VALPME) method combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV) for the determination of common acaricides in fruit juice samples. Several important parameters influencing extraction efficiency were investigated and optimized, including the type and volume of DES, sample solution pH, effect of salt addition and, extraction and vortex time. Under optimal experimental conditions, the method showed good linearity with the correlation coefficients (R 2) of 0.9986-0.9991 in the linear range of 2-300 μg L-1, low limits of detection of 0.5-1 μg L-1 and acceptable extraction recoveries in the range of 85-93%. The proposed method was successfully applied for the extraction and preconcentration of trace acaricides in real fruit juice samples, and the results demonstrated the potential of the synthesized DESs for the extraction and determination of contaminants in aqueous samples.

Preparation of new hydrophobic deep eutectic solvents and their application in dispersive liquid-liquid microextraction of Sudan dyes from food samples

In this work, a new generation of hydrophobic deep eutectic solvents (DESs) was prepared using eugenol (as hydrogen bond donor) and benzyltriethylammonium bromide, benzyltributylammonium bromide, benzyltriethylammonium chloride and benzyltributylammonium chloride (as hydrogen bond acceptor) in different molar ratios. These DESs were applied to vortex-assisted dispersive liquid-liquid microextraction of Sudan dyes from food samples, followed by high-performance liquid chromatographic determination. The influencing parameters, including the type of DES, amount of DES, extraction time, solution pH and salt addition, were investigated and optimized. Under the optimized conditions, a linear range of 2-1000 ng mL^-1 with determination coefficients of <0.999 was obtained. Limits of detection and limits of quantification were in the range of 0.5 to 1 ng mL^-1 and 2 to 3 ng mL^-1, respectively. The proposed method was successfully used in the determination of Sudan dyes in chili sauce, chili powder and ketchup, and satisfactory recoveries of between 89.9 and 119.3% were obtained, with relative standard deviations in the range of 0.1-6.8%. The proposed method is simple, green and efficient, and can be applied to determine Sudan dyes in complex matrices.

Determination of pyridaphenthion in soybean sprout samples by gas chromatography mass spectrometry with matrix matching calibration strategy after metal sieve linked double syringe based liquid-phase microextraction

A novel analytical strategy for the trace determination of pyridaphenthion pesticide was developed in this study. Gas chromatography-mass spectrometry (GC-MS) was used for the accurate, feasible and precise determination of this analyte. Liquid phase microextraction (LPME) was performed with a metal sieve linked double syringe (MSLDS) system, which eliminated the need for a disperser solvent. In order to increase extraction efficiency for the analyte, all variable parameters were optimized and the system analytical performance of the proposed method was determined. Limit of detection and quantification (LOD and LOQ) values of pyridaphenthion were found to be 0.8 and 2.7 µg L-1, respectively. Compared to GC-MS system's analytical performance, the developed method provided approximately 273-folds improvement in the detection limit of the analyte. Applicability/accuracy of the developed analytical strategy was checked by recovery experiments carried out with soybean sprouts, and the results obtained were satisfactory.

Determination of Polybrominated Diphenyl Ethers in Water Samples Using Effervescent-Assisted Dispersive Liquid-Liquid Icroextraction with Solidification of the Aqueous Phase

An effective and sensitive method is necessary for the determination of polybrominated diphenyl ethers (PBDEs) pollutants in water. In this study, effervescent-assisted dispersive liquid-liquid microextraction with solidification of the aqueous phase (EA-DLLME-SAP), followed by Gas Chromatography-Tandem Mass Spectrometry (GC-MS-MS) quantitative analysis, was established for the preconcentration and determination of PBDEs in real environmental water samples. 1,1,2,2-Tetrachloroethane was used as the extractant and directly dispersed into the water phase of the aqueous samples with the aid of a large number of carbon dioxide bubbles generated via the acid-base reaction of acetic acid and sodium bicarbonate, which did not require the use of a dispersant during the extraction process. The key factors affecting the extraction recovery were optimized, and an internal standard was used for quantitative analysis, which gave good linearity ranges of 1-100 ng·L^-1 (BDEs 28, 47, 99, and 100), 2-200 ng·L^-1 (BDEs 153, 154, and 183) and 5-500 ng·L^-1 (BDE 209) with limits of quantification in the range of 1.0-5.0 ng·L^-1. The accuracy was verified with relative standard deviations < 8.5% observed in tap, lake, river and reservoir water samples with relative recoveries ranging from 67.2 to 102.6%. The presented method contributes to the determination of PBDEs in environmental water samples.

Functionalized Multi Walled Carbon Nanotubes-Reinforced Hollow Fiber Solid/Liquid Phase Microextraction and HPLC-DAD for Determination of Phenazopyridine in Urine

Introduction:

A sensitive analytical method based on functionalized multi walled carbon nanotubes reinforced hollow fiber solid/liquid phase microextraction (F-MWCNTs-HF-SLPME) forwarded with HPLC-DAD for analyzing phenazopyridine from urine is presented.

Materials and Methods:

The extraction of phenazopyridine is performed using specially designed FMWCNTs- HF-SLPME device constructed as follows: the functionalized multi walled carbon nanotubes (F-MWCNTs) were immobilized into the pores of 2.5 cm hollow fiber micro-tube using capillary forces and ultrasonication, then, the lumen of the micro-tube was filled with 1-octanol with two ends sealed. Subsequently, the device was placed into 10-mL of urine sample containing the analyte with agitation. After ending extraction, the device was removed, rinsed, sonicated in 250 µL of organic solvent and analyzed directly by the separation system.

Results and Conclusion:

Different parameters affecting the performance of the developed method were optimized. The method showed good linearity with (R2) 0.999 and good repeatability with (RSDs) from 3.7 to 0.9% at analyte concentration ranged from 0.01 to 10 µg L-1 of spiked urine samples. The limit of detection/ quantitation, LODs/LOQs was 0.02/0.09 µg L-1. In comparison with reference methods, the developed method is considered as a promising microextraction technique for determination of trace phenazopyridine in human urine using a common HPLC without further cleanup procedures.

Porous magnetized carbon sheet nanocomposites for dispersive solid-phase microextraction of organophosphorus pesticides prior to analysis by gas chromatography-ion mobility spectrometry

Carbon sheets were attached to magnetite (Fe₃O₄) nanoparticles. The resulting nanocomposite is shown to be a viable sorbent for use in magnetic dispersive solid-phase microextraction of three organophosphorus pesticides. The sorbent was synthesized via the sol-gel process followed by calcination and was characterized by an X-ray diffractometer, field emission scanning electron microscopy and energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and Raman spectrometry techniques. The affecting parameters in the adsorption and desorption steps were assessed and optimized via response surface methodology. Following desorption with dichloromethane, the OPPs were quantified by gas chromatography along with ion mobility spectrometry detection. Under optimized conditions, the limits of detection were 1.00, 0.46 and 0.85 μg L^-1 for fenthion, malathion and chlorpyrifos, respectively. Response is linear in the concentration range of 2-500 μg L^-1 for fenthion and malathion, and 2-1000 μg L^-1 for chlorpyrifos with the determination coefficient larger than 0.9969. The intra-day and inter-day precision were from 3 to 9% and 5 to 16%, respectively. The enrichment factor was greater than 142 for all the studied pesticides. The sorbent was used for analyze spiked water and vegetable samples and gave relative recovery higher than 82%. Graphical abstract A flowchart of the synthesis of porous magnetized carbon sheet nanocomposites and the process of the magnetic dispersive solid-phase microextraction (MD-μ-SPE) of three organophosphorus pesticides prior to analysis by gas chromatography-ion mobility spectrometry (GC-IMS).

Development of Dispersive Liquid-Liquid Microextraction method combined with UV spectrophotometry for the Determination of Malathion Pesticide

A simple and novel method was developed by combination of dispersive liquid-liquid microex-traction with UV spectrophotometry for the preconcentartion and determination of trace amount of malathion. The presented method is based on using a small volume of ethylenechloride as the extraction solvent was dissolved in ethanol as the dispersive solvent, then the binary solution was rapidly injected by a syringe into the water sample containing malathion. The important parame-ters, such the type and volume of extraction solvent and disperser solvent, the effect of extraction time and rate, the effect of salt addition and reaction conditions were studied. At the optimum conditions, the calibration graph was linear in the range of 2-100 ng mL-1 of malathion with a limit of detection of 0.8 ng L-1. In addition, the enrichment factor was 30. The developed method was successfully applied for the determination of malathion pesticide in water samples

A hybrid material composed of a polyoxometalate of type BeW12O40 and an ionic liquid immobilized onto magnetic nanoparticles as a sorbent for the extraction of organophosphorus pesticides prior to their determination by gas chromatography

The authors describe a method for the extraction of organophosphorus pesticides (OPPs) by using a magnetically separable sorbent consisting of a polyoxometalate of type BeW₁₂O₄₀ supported on imidazole functionalized silica-coated cobalt ferrite. The sorbent was characterized by X-ray powder diffraction, field-emission scanning electron micrographs, vibrating sample magnetometry and FT-IR. The effects of the amount of adsorbent, pH value, salt concentration, extraction time, desorption solvent nature and volume and desorption time were investigated. Under optimal conditions, the method resulted in the following figures of merit: (a) the linear parts of the calibration plots typically extend from 0.08 to 300 μg mL^-1 of OPPs; (b) detection limits are between 0.02 to 0.06 ng mL^-1; and (c), extraction recoveries from spiked samples vary from 70.0 to 89.2%, with relative standard deviations between 5.4 and 7.6%. The nanocomposites can be reused up to 10 times. Compared to other methods for pretreatment and preconcentration of OPPs, the new method is more rapid, sensitive, accurate and eco-friendly. The method was successfully applied to the determination of the OPP residues in water samples and fruit juices. Graphical Abstract Schmatic presenation of the synthesis of core-shell magnetic nanoparticles (MNPs) of the type BeW12O40-ILSCCFNPs, and their application as sorbent for magnetic solid-phase extraction (MSPE) of organophosphorus pesticides.

Polypyrrole coated ZnO nanorods on platinum wire for solid-phase microextraction of amitraz and teflubenzuron pesticides prior to quantitation by GC-MS

The authors describe a new sorbent for amitraz and teflubenzuron pesticides. It consists of a platinum wire coated with polypyrrole-coated ZnO nanorods. The nanocomposite was prepared by a two-step process. In the first step, oriented ZnO nanorods were hydrothermally grown in situ on a platinum wire. Subsequently, oxidative vapor phase polymerization of pyrrole was performed on FeCl₃-impregnated ZnO nanorods to give a porous polypyrrole film. The organic/inorganic nanocomposite synthesized through hydrothermal deposition and chemical vapor deposition polymerization yields material with attractive properties. The coated wire was applied to solid-phase microextraction of amitraz (in the form of 2,4-dimethylaniline resulting from the hydrolysis of amitraz) and teflubenzuron. The effects of extraction temperature, extraction time, sample pH value and salt concentration were optimized. The analytes 2,4-dimethylaniline and teflubenzuron were then quantified by GC-MS. Under optimum conditions, the LODs range between 0.1 and 0.15 ng.mL^-1. Relative standard deviations at two concentration are <8.3% for intraday precision and <10.3% for inter-day precision. In all cases, the fiber to fiber reproducibility is <12.2%. For both analytes the linear dynamic ranges are 0.5-300 ng.mL^-1. The procedure was successfully applied to the analysis of spiked agricultural water samples. Graphical abstract A novel inorganic/organic hybrid nanocomposite was synthesized through in situ hydrothermal deposition of ZnO nanorods and ten placing a thin layer of polypyrrole on them by chemical vapor deposition polymerization. This nanocomposite was applied to fabricate a solid-phase microextraction fiber for the extraction of amitraz and teflubenzuron pesticides residue from agricultural samples prior to their quantitation by GC-MS.

Direct immersion single drop micro-extraction method for multi-class pesticides analysis in mango using GC-MS

Due the negative effects of pesticides on environment and human health, more efficient and environmentally friendly methods are needed. In this sense, a simple, fast, free from memory effects and economical direct-immersion single drop micro-extraction (SDME) method and GC-MS for multi-class pesticides determination in mango samples was developed. Sample pre-treatment using ultrasound-assisted solvent extraction and factors affecting the SDME procedure (extractant solvent, drop volume, stirring rate, ionic strength, time, pH and temperature) were optimized using factorial experimental design. This method presented high sensitive (LOD: 0.14-169.20μgkg-1), acceptable precision (RSD: 0.7-19.1%), satisfactory recovery (69-119%) and high enrichment factors (20-722). Several obtained LOQs are below the MRLs established by the European Commission; therefore, the method could be applied for pesticides determination in routing analysis and custom laboratories. Moreover, this method has shown to be suitable for determination of some of the studied pesticides in lime, melon, papaya, banana, tomato, and lettuce.

Porphyrin based porous organic polymer modified with Fe3O4 nanoparticles as an efficient adsorbent for the enrichment of benzoylurea insecticides

Porphyrin-based porous organic polymers (P-POPs) are amorphous polymers linked by strong covalent bonds between the porphyrin subunits that act as building blocks. The authors describe a magnetic P-POP that possesses high surface area, a highly porous structure, and strong magnetism. The MP-POP was employed as a magnetic sorbent for the extraction of benzoylurea insecticides from cucumber and tomato samples prior to their determination by HPLC. The sorbent has a typical sorption capacity of 1.90-2.00 mg∙g^-1. The method exhibits a good linear range (0.8-160 ng·g^-1), low limits of detection (0.08-0.2 ng·g^-1), and high method recoveries (81.8-103.5%) for cucumber and tomato samples. The MP-POP has different adsorption capabilities for the benzoylurea insecticides, phenylurea herbicides and phenols compounds, and the adsorption mechanism is found to be based on π-stacking, hydrogen-bonding, and hydrophobic interactions. Graphical abstract A novel magnetic porphyrin-based porous organic polymer was fabricated and used as the adsorbent for the efficient extraction of benzoylurea insecticides.