Direct electrochemistry and electrocatalysis of hemoglobin on a glassy carbon electrode modified with poly(ethylene glycol diglycidyl ether) and gold nanoparticles on a quaternized cellulose support. A sensor for hydrogen peroxide and nitric oxide

Immobilization of α-Glucosidase on Polyethylene Glycol Diglycidyl Ether-Modified NH2-MIL-53(Al) for Inhibitory Activity Assay of Traditional Chinese Medicine

Enzyme inhibition-based drug screening is a critical strategy in drug development. However, significant limitations arise from the instability, limited reusability, and narrow applicability of traditional enzyme assays when screening for inhibitors in complex matrices, such as extracts of traditional Chinese medicines (TCMs). A screening strategy was developed that combines capillary electrophoresis (CE) with an enzymatic assay utilizing covalently immobilized α-glucosidase (α-Glu). NH2-MIL-53(Al) was synthesized using a hydrothermal method, serving as a robust support for enzyme immobilization. By employing polyethylene glycol diglycidyl ether (PEGDGE) as a covalent linker, significant enhancements in the stability and reusability of α-Glu were achieved. The immobilized enzyme maintained 77.7% of its initial activity over 10 cycles and displayed a Michaelis-Menten constant of 1.25 mM. Moreover, the inhibition constant and IC50 values for acarbose were determined to be 17.41 μM and 0.46 μM, respectively. Utilizing this immobilized enzyme system, screening of 12 TCMs identified several potent α-Glu inhibitors, including Chebulae Fructus and Curcumae Longae Rhizoma. These results highlight the successful integration of NH2-MIL-53(Al) and PEGDGE in creating a stable and reusable screening platform for enzyme inhibitors. This approach not only advances the field of enzyme immobilization technology but also provides a promising pathway for discovering antidiabetic agents from natural sources.

Direct electrochemical detection of extracellular nitric oxide in Arabidopsis protoplast based on cytochrome P450 55B1 biosensor

Cytochrome P450 55B1(CYP55B1) from Chlamydomonas reinhardtii reduces nitric oxide (NO) to dinitrogen oxide (N₂O) with the electron supply from NAD(P)H in vivo. Here a novel nitric oxide biosensor was developed by immobilized CYP55B1 on the surface of pyrolytic graphite electrode (PGE) by cross-linking with glutaraldehyde (GA) and bovine serum albumin (BSA). The direct electrochemistry of CYP55B1 was realized with the redox peak potential of -0.355 V and -0.385 V and the catalytic reduction peak of NO by CYP55B1 is at -0.85 V at the scan rate of 0.5 V S^-1 in pH 7.0 phosphate buffer. The apparent coverage (Γ = 1.43 × 10^-11 mol cm^-2), the electron transfer rate constant (ks = 17.39 s^-1) and apparent affinity to NO (K_mapp = 11.64 nM) of CYP55B1 in GA/BSA film were obtained. The catalytic mechanism of CYP55B1 towards NO with NADH was examined by the biosensor. The linear range of NO detection was investigated by differential pulse voltammetry with the results of 5-50 nM and the detection limit of 0.5 nM (S/N = 3). The selectivity and stability of the electrochemical biosensor were investigated. Furthermore, the CYP55B1electrochemical biosensor was applied to monitor NO release from Arabidopsis protoplasts with the average content of 0.848 fmol per cell under anaerobic condition.

Direct acupuncture of nitric oxide by an electrochemical microsensor with high time-space resolution

Measurement of signal molecule is critically important for understanding living systems. Nitric oxide (NO) is a key redox signal molecule that shows diverse roles in virtually all life forms. However, probing into NO's activities is challenging as NO has restricted lifetime (<10 s) and limited diffusion distance (usually <200 μm). So, for the direct acupuncture of NO within the time-space resolution, an electrochemical microsensor has been designed and fabricated in this work. Fabrication of the microsensor is achieved by (1) selective assembly of an electrocatalytic transducer, (2) attaching the transducer on carbon fiber electrode, and (3) covered it with a screen layer to reduce signal interference. The fabricated microsensor exhibits high sensitivity (LOD, 13.5 pM), wide detection range (100 pM-5 μM), and good selectivity. Moreover, studies have revealed that the availability of the sensor for efficient detection of NO is due to the formation of a specific DNA/porphyrin hybrid structure that has synergetic effects on NO electrocatalysis. Therefore, NO release by cells and tissues can be directly and precisely traced, in which we have obtained the release pattern of NO by different cancer cell lines, and have known its dynamics in tumor microenvironment. The fabricated electrocatalytic microsensor may provide a unique and useful tool for the direct assay of NO with high time-space resolution, which promisingly gives a technical solution for the bioassay of NO in living systems.

Toxicity Assessment of a Single Dose of Poly(ethylene glycol) Diglycidyl Ether (PEGDE) Administered Subcutaneously in Mice

Poly(ethylene glycol) diglycidyl ether (PEGDE) is widely used to cross-link polymers, particularly in the pharmaceutical and biomaterial sectors. However, the subcutaneous toxicity of PEGDE has not yet been assessed. PEGDE samples (500–40,000 μg/mouse) were subcutaneously injected into the paraspinal dorsum of BALB/c male mice. Cage-side observations were carried out with measurement of organ weight, body weight variation, and feed intake, as well as histopathological characterization on day 28 post-exposure. Mice that received 40,000 μg of PEGDE showed severe toxic response and had to be euthanized. Subcutaneous injection of PEGDE did not alter feed intake and organ weight; however, the body weight variation of mice injected with 20,000 μg of PEGDE was significantly lower than that of the other groups. Exposure to 10,000 and 20,000 μg of PEGDE induced epidermal ulcer formation and hair loss. The histology of skin tissue in mice administered with 20,000 μg of PEGDE showed re-epithelialized or unhealed wounds. However, the liver, spleen, and kidneys were histologically normal. Collectively, PEGDE, particularly above 10,000 μg/mouse, caused subcutaneous toxicity with ulceration, but no toxicity in the other organs. These results may indicate the optimal concentration of subcutaneously injected PEGDE.

Bioelectrocatalysis of Hemoglobin on Electrodeposited Ag Nanoflowers toward H2O2 Detection

Hydrogen peroxide (H2O2) is a partially reduced metabolite of oxygen that exerts a diverse array of physiological and pathological activities in living organisms. Therefore, the accurate quantitative determination of H2O2 is crucial in clinical diagnostics, the food industry, and environmental monitoring. Herein we report the electrosynthesis of silver nanoflowers (AgNFs) on indium tin oxide (ITO) electrodes for direct electron transfer of hemoglobin (Hb) toward the selective quantification of H2O2. After well-ordered and fully-grown AgNFs were created on an ITO substrate by electrodeposition, their morphological and optical properties were analyzed with scanning electron microscopy and UV-Vis spectroscopy. Hb was immobilized on 3-mercaptopropionic acid-coated AgNFs through carbodiimide cross-linking to form an Hb/AgNF/ITO biosensor. Electrochemical measurement and analysis demonstrated that Hb retained its direct electron transfer and electrocatalytic properties and acted as a H2O2 sensor with a detection limit of 0.12 µM and a linear detection range of 0.2 to 3.4 mM in phosphate-buffered saline (PBS). The sensitivity, detection limit, and detection range of the Hb/AgNF/ITO biosensor toward detection H2O2 in human serum was also found to be 0.730 mA mM-1 cm-2, 90 µM, and 0.2 to 2.6 mM, indicating the clinical application for the H2O2 detection of the Hb/AgNF/ITO biosensor. Moreover, interference experiments revealed that the Hb/AgNF/ITO sensor displayed excellent selectivity for H2O2.

Electroanalytical characterization of the direct Marinobacter hydrocarbonoclasticus nitric oxide reductase-catalysed nitric oxide and dioxygen reduction

Understanding the direct electron transfer processes between redox proteins and electrode surface is fundamental to understand the proteins mechanistic properties and for development of novel biosensors. In this study, nitric oxide reductase (NOR) extracted from Marinobacter hydrocarbonoclasticus bacteria was adsorbed onto a pyrolytic graphite electrode (PGE) to develop an unmediated enzymatic biosensor (PGE/NOR)) for characterization of NOR direct electrochemical behaviour and NOR electroanalytical features towards NO and O₂. Square-wave voltammetry showed the reduction potential of all the four NOR redox centers: 0.095 ± 0.002, -0.108 ± 0.008, -0.328 ± 0.001 and -0.635 ± 0.004 V vs. SCE for heme c, heme b, heme b₃ and non-heme Fe_B, respectively. The determined sensitivity (-4.00 × 10^-8 ± 1.84 × 10^-9 A/μM and - 2.71 × 10^-8 ± 1.44 × 10^-9 A/μM for NO and O₂, respectively), limit of detection (0.5 μM for NO and 1.0 μM for O₂) and the Michaelis Menten constant (2.1 and 7.0 μM for NO and O₂, respectively) corroborated the higher affinity of NOR for its natural substrate (NO). No significant interference on sensitivity towards NO was perceived in the presence of O₂, while the O₂ reduction was markedly and negatively impacted (3.6 times lower sensitivity) by the presence of NO. These results clearly demonstrate the high potential of NOR for the design of innovative NO biosensors.

TaS3 Nanofibers: Layered Trichalcogenide for High-Performance Electronic and Sensing Devices

Layered materials, like transition metal dichalcogenides, exhibit broad spectra with outstanding properties with huge application potential, whereas another group of related materials, layered transition metal trichalcogenides, remains unexplored. Here, we show the broad application potential of this interesting structural type of layered tantalum trisulfide prepared in a form of nanofibers. This material shows tailorable attractive electronic properties dependent on the tensile strain applied to it. Structure of this so-called orthorhombic phase of TaS₃ grown in a form of long nanofibers has been solved and refined. Taking advantage of these capabilities, we demonstrate a highly specific impedimetric NO gas sensor based on TaS₃ nanofibers as well as construction of photodetectors with excellent responsivity and field-effect transistors. Various flexible substrates were used for the construction of a NO gas sensor. Such a device exhibits a low limit of detection of 0.48 ppb, well under the allowed value set by environmental agencies for NO_x (50 ppb). Moreover, this NO gas sensor also showed excellent selectivity in the presence of common interferences formed during fuel combustion. TaS₃ nanofibers produced in large scale exhibited excellent broad application potential for various types of devices covering nanoelectronic, optoelectronic, and gas-sensing applications.

Hemoglobin becomes electroactive upon interaction with surface-protected Au nanoparticles

In this work, we report on the electrochemical behavior of bioconjugates prepared with gold nanoparticles (AuNP) capped with three different molecular layers (citrate anions, 6-mercaptopurine and ω-mercaptoundecanoic acid) and the protein hemoglobin (Hb). Freshly formed bioconjugates are deposited on a glassy carbon electrode and assayed for electroactivity. A pair of redox peaks with formal potential at -0.37V is obtained, in contrast with the free Hb protein that is inactive on the glassy carbon substrate. The redox response is typical for quasi-reversible processes allowing the determination of the electron transfer rate constant for the three bioconjugates. Additional evidence of the structural integrity of protein upon forming the bioconjugate is obtained by monitoring the electrochemical response of the Hb heme Fe(III)/Fe(II) redox couple as a function of solution pH. Moreover, the Hb forming the protein corona around the AuNPs show good electrocatalytic activity for the reduction of hydrogen peroxide and oxygen. It has been found that only the first layer of Hb surrounding the AuNPs are electroactive, although some part of the second layer also contribute, pointing to the role of the AuNP in the electrochemical response.

A MoS₂-based system for efficient immobilization of hemoglobin and biosensing applications

A novel hydrogen peroxide (H2O2) and nitric oxide (NO) biosensor was fabricated by immobilizing hemoglobin (Hb) on a gold nanoparticle-decorated MoS2 nanosheet (AuNPs@MoS2) nanocomposite film modified glass carbon electrode. The AuNPs@MoS2 nanocomposite not only made the immobilized Hb keep its native biological activity but also facilitated the electron transfer between electrode and the electroactive center of Hb due to its excellent conductivity and biocompatibility. The direct electrochemistry and bioelectrocatalytic activity of Hb were investigated by cyclic voltammetry (CV). The modified electrode showed good electrocatalytic ability toward the reduction of H2O2 and NO. Under optimal conditions, the current response was linear with the concentration of H2O2 and NO in the range from 10 to 300 μM and 10 to 1100 μM with a detection limit of 4 and 5 μM, respectively. This MoS2-based biosensor was sensitive, reproducible and stable, indicating that AuNPs@MoS2 nanocomposite maybe a promising platform to construct electrochemical sensors for chemical and biological molecules detection.