A colorimetric method for the determination of xanthine based on the aggregation of gold nanoparticles

Determination of promethazine in forensic samples using multi-walled carbon nanotube-gold nanoparticle electrochemical sensor

An electrochemical sensor was developed based on a glassy carbon electrode (GCE) modified with multi-walled carbon nanotubes (MWCNTs) and gold nanoparticles (AuNPs) for the determination of promethazine (PMZ) in 'purple drank', pharmaceutical formulations, and synthetic saliva. The oxidation of PMZ at the modified electrode occurred at a higher cathodic potential and produced a higher sensitivity compared to the unmodified GCE. The morphology of the modified electrode was characterized using field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), and transmission electron microscopy (TEM). The presence of MWCNTs and AuNPs was confirmed. The optimized parameters included the concentration and pH of the supporting electrolyte, amount of modifiers used to fabricate the electrode, deposition potential, and time. Using these optimized conditions, the method has a linear range from 0.5 to 100 μmol L-1, with a R2 value of 0.9991. The limit of detection (3SDblank/slope) was 0.13 μmol L-1. The proposed electrochemical sensor was successfully applied for the determination of PMZ in 'purple drank', pharmaceutical formulations, and spiked synthetic saliva samples. The results obtained from this sensor were in statistical agreement with the values obtained using the reference gas chromatography-flame ionization method.

Novel biosensor platform for glucose monitoring via smartphone based on battery-less NFC potentiostat

Near-field communication (NFC) was used to control a portable glucose biosensor for diabetes diagnosis. The system comprised a smartphone and an NFC potentiostat connected to a screen-printed carbon electrode (SPCE) modified with Prussian blue-graphene ink and functionalized with gold nanoparticles-embedded poly (3,4ethylene dioxythiophene):polysulfonic acid coated with glucose oxidase (GOx-AuNPs-PEDOT:PSS/PB-G). GOx catalyzed the glucose redox reaction while the conductivity and sensitivity of the AuNPs-PEDOT:PSS composite enhanced electron transfer to the PB-G, which was used as a mediator. The fabrication process was characterized by scanning electron microscopy (SEM) with energy dispersibe x-ray analysis (EDX). The platform was electrochemically characterized by electrical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The NFC biosensing device was then applied to quantify glucose in human blood serum by amperometry. The linear concentration range and detection limit for glucose were 0.5-500 μM and 0.15 μM, respectively. The accuracy of the device was good and results were in agreement with the results obtained from the standard hospital method. This NFC glucose sensing device can be a simple, sensitive, selective and portable platform for medical diagnosis.

Visual colorimetric sensor for nitroguanidine detection based on hydrogen bonding-induced aggregation of uric acid-functionalized gold nanoparticles

A colorimetric assay is proposed for the quantification of nitroguanidine (NQ), based on triggering the aggregation of uric acid-modified gold nanoparticles (AuNPs@UA) by intermolecular hydrogen bonding interaction between uric acid (UA) and NQ. The red-to-purplish blue (lavender) color change of AuNPs@UA with increasing NQ concentrations could be perceived with the naked eye or detected by UV-vis spectrophotometry. The absorbance versus concentration correlation gave a linear calibration curve in the range of 0.6-3.2 mg L^-1 NQ, with a correlation coefficient of 0.9995. The detection limit of the developed method was 0.063 mg L^-1, lower than those of noble metal aggregation methods in the literature. The synthesized and modified AuNPs were characterized using UV-vis spectrophotometry, scanning transmission electron microscopy (STEM), dynamic light scattering (DLS), and Fourier transform infrared spectroscopy (FTIR). Some critical parameters such as modification conditions of AuNPs, UA concentration, solvent environment, pH, and reaction time were optimized for the proposed method. The non-interference of common explosives (i.e., nitroaromatic, nitramine, nitrate ester, insensitive and inorganic explosives), common soil and groundwater ions (Na⁺, K⁺, Ca²⁺, Mg²⁺, Cu²⁺, Fe²⁺, Fe³⁺, Cl^-, NO₃^-, SO₄^2-, CO₃^2-, PO₄^3-) and possible interfering compounds (used as camouflage agents for explosives; D-(+)-glucose, sweeteners, acetylsalicylic acid (aspirin), household powder detergents, and paracetamol) on the proposed method was demonstrated, proving that the procedure was fairly selective for NQ, due to special hydrogen bonding interactions between UA-functionalized AuNPs and NQ. Finally, the proposed spectrophotometric method was applied to NQ-contaminated soil, and the obtained results were statistically compared with those of the liquid chromatography-tandem mass spectrometric (LC-MS/MS) method in the literature.

A sensing platform based on Cu-MOF encapsulated Dawson-type polyoxometalate crystal material for electrochemical detection of xanthine

A promising sensing platform based on polyoxometalate-based metal-organic framework (POMOF) was established for sensitive electrochemical detection of xanthine (XA). In the unique structure of POMOF, the Dawson polyoxoanions P₂W₁₈ were encapsulated into 3D open copper-mixed ligand nanotube framework Cu-MOF, in which the cavity of the metal-organic framework provides a specific shelter to prevent the aggregation and loss of polyoxometalate in electrocatalytic reactions; meanwhile, unsaturated Cu(II) active sites of Cu-MOF can also serve as electrocatalytic active center. The POMOF-based sensor (CuMOFP₂W₁₈/XC-72R) was fabricated by using acetylene black (XC-72R) as a support material to enhance the conductivity of POMOF. The performances of the POMOF-based sensor were studied by using different electrochemical testing methods. The composite displayed remarkable electrocatalytic activity for the oxidation of XA due to the synergistic effect of polyoxometalate (POM) and metal-organic framework (MOF). The electrochemical sensor demonstrated a wide linear range (0.5 μM-240 μM), low detection limit (0.26 μM), and excellent selectivity for detecting XA. Furthermore, the composite further demonstrated excellent reproducibility and great stability. More importantly, the proposed sensor was utilized to detect XA in real samples, which may provide a new way for early disease diagnosis.

An ESIPT-based fluorescent turn-on probe with isothiocyanate for detecting hydrogen sulfide in environmental and biological systems

A probe with an isothiocyanate group was synthesized and evaluated for its H₂S sensing ability. Upon addition of H₂S, the probe exhibited ratiometric properties during absorption with a red-shift. The probe exhibited fluorescent off-on responses towards H₂S via the ESIPT process, due to the conversion of isocyanate into amine. UV-vis, fluorescence, and ¹H NMR spectroscopic analyses were performed to investigate the sensing mechanism. The probe has a large Stokes shift, short response time, and low detection limit. It can be used to estimate H₂S levels within the range of 0-36 nM. The practical applicability of the probe was demonstrated using water samples and living cells.

Highly sensitive visual colorimetric sensor for xanthine oxidase detection by using MnO2-nanosheet-modified gold nanoparticles

In this study, a highly sensitive colorimetric assay has been constructed for the determination of xanthine oxidase (XOD) activity by the GNP@MnO₂ core-shell nanoparticles as probe. In the presence of XOD, xanthine can be oxidized to produce H₂O₂, which makes the MnO₂ shell fallen off. With the single particle detection (SPD) based dark field microscopy (DFM), the scattering color of GNP@MnO₂ NP probe shows obvious change before and after etching process. At the single particle level, noticeable color change of the single probe can be easily detected in the existence of trace XOD. This SPD-based colorimetric strategy displays broad linear dynamic range (0.02-4 mU/mL) and low detection limit of 7.82 μU/mL, which is more sensitive than the results from ensemble sample measurement. In addition, we tested the inhibitory effect of quercetin on the activity of XOD and obtained good inhibition effect. As a consequence, this SPD-based colorimetric strategy provides new perception for the ultrasensitive detection of molecules in complex system.

Label-Free ZnIn2S4/UiO-66-NH2 Modified Glassy Carbon Electrode for Electrochemically Assessing Fish Freshness by Monitoring Xanthine and Hypoxanthine

Considering that simultaneous detection of xanthine (XA) and hypoxanthine (HXA) has been proved to be a reliable and feasible method for assessing fish freshness, a novel electrochemical sensing platform based on the ZnIn2S4/UiO-66-NH2 modified glassy carbon electrode (GCE) was constructed in this study for XA and HXA determination. X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR) were performed to exhibit the morphology and structural characteristics of ZnIn2S4/UiO-66-NH2. The Brunauer–Emmett–Teller (BET) displayed that the introduction of UiO-66-NH2 can improve the specific surface area of the hybrid. Besides, the electrochemical sensing performance of ZnIn2S4/UiO-66-NH2 was evaluated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). For simultaneously detecting XA and HXA, the fabricated electrochemical sensor shows wide linear ranges (0.025–40 µM and 0.3–40 µM) with low detection limits (0.0083 µM and 0.1 µM). This sensor also has 96–103% recovery in detecting XA and HXA content in large yellow croaker meat samples, demonstrating a promising application in the marine food industry.

Self-assembly encapsulation of vanadium tetrasulfide into nitrogen doped biomass-derived porous carbon as a high performance electrochemical sensor for xanthine determination

A novel VS4@N-BPC platform was constructed, and demonstrated a high electrochemical response to xanthine due to the excellent synergistic effect.

Paper-Based Enzyme Biosensor for One-Step Detection of Hypoxanthine in Fresh and Degraded Fish

Food freshness monitoring, which can reflect the quality of the product at the time of use, remains a great challenge for consumers and the food industry. Herein, we report the development of a cost-effective enzyme-based paper biosensor, which can monitor fish freshness and predict spoilage. The biosensor measures the release of hypoxanthine (HX), an indicator of meat and fish degradation, using the enzymatic conversion of HX by xanthine oxidase (XOD). We demonstrate that the entrapment of XOD and an organic dye, nitro blue tetrazolium chloride (NBT), within a sol-gel biohybrid enables their stabilization on paper and promotes the enzymatic reaction with further retention of the reaction products within the cellulosic network . Linearity in the micromolar concentration range with a detection limit of 3.7 μM for HX is obtained. The biosensor has high selectivity toward HX and is manufactured in few steps from inexpensive widely available materials. The applicability of the biosensor is demonstrated by following fish degradation over time and measuring HX concentrations ranging from 117 (±9) to 198 (±5) μM within 24 h of degradation, at levels that are comparable with those measured by a commercial enzymatic kit for HX detection. As compared to the commercial kit, our biosensors are more cost-effective, do not require addition of exogenous reagents and are portable, having all of the reagents needed for analysis embedded within the sensing platform. This proof-of-concept work demonstrates that the paper-based HX biosensor has potential as a robust reagentless device for real-time monitoring of food freshness and for other applications in which HX plays an important role.

Silver Nanoplates for Colorimetric Determination of Xanthine in Human Plasma and in Fish Meat via Etching/Aggregation/Fusion Steps

Silver nanoplates (AgP) were prepared and used in a colorimetric method for the evaluation of Xanthine (Xan) in blood plasma and fish meat. The detection mechanism for Xan was observed to occur via etching of AgP particles/aggregation/fusion steps, resulting in a color change from blue to grey. First, the basic Xan solution is adsorbed through partial substitution of capping molecules around the AgP with Xan, and then intermolecular hydrogen bonds form between AgP and AgP. Subsequently, the titrant Xan solution further etches the AgP and finally fuses particles together. Owing to the step by step mechanism, the response range towards Xan has two linear regression ranges: 0.15-0.60 μM and 0.61-3.00 μM, respectively. The detection limit in the range of 0.15-0.60 μM is 0.011 μM (S/N = 3). AgP exhibits good selectivity for Xan over other potential interferents such as amino acids and blood proteins. AgP achieves rapid detection of Xan and can be applied to the satisfactory determination of Xan in blood plasma and fish meat. This colorimetric sensor is easy to use, cost effective, fast, selective and user friendly.

Nitrogen-doped graphene quantum dot-based sensing platform for metabolite detection

A novel fluorescent sensing platform based on nitrogen-doped graphene quantum dots (N-GQDs) is presented, which is able to detect various metabolites (cholesterol, glucose, lactate, and xanthine) rapidly, sensitively, and selectively. Hg²⁺ can attach on the surface of N-GQDs, leading to the quenching of N-GQD fluorescence. In the presence of cysteine (Cys), Hg²⁺ is released from N-GQDs and associates with Cys. Then, the fluorescence of N-GQDs is recovered. Hydrogen peroxide, resulting from the enzymatic oxidation of metabolites, can convert two molecules of Cys into one molecule of cystine, which cannot bind with Hg²⁺. So, the fluorescence of N-GQDs quenched again. For cholesterol, glucose, lactate, and xanthine, the limits of detection are 0.035 μmol/L, 0.025 μmol/L, 0.07 μmol/L, and 0.04 μmol/L, respectively, and the linear ranges are 1-12 μmol/L, 0.06-3 μmol/L, 0.2-70 μmol/L, and 0.12-17 μmol/L, respectively. The presented method was applied to quantify metabolites in human blood samples with satisfactory results. Graphical abstract.

Thorough utilization of rice husk: metabolite extracts for silver nanocomposite biosynthesis and residues for silica nanomaterials fabrication

Utilizing rice husk extracts and residues to synthesize AgNPs and SiO₂ nanomaterials with antioxidant and heavy metal removal capacities.

Highly selective and sensitive determination of dopamine in biological samples via tuning the particle size of label-free gold nanoparticles

Herein, a rapid, sensitive and selective approach for the colorimetric detection of dopamine (DA) was developed utilizing unmodified gold nanoparticles (AuNPs). This assay relied upon the size-dependent aggregation behavior of DA and three other structurally similar catecholamines (CAs), offering highly specific and accurate detection of DA. By means of this study, we attempted to overcome the tedious procedures of surface premodifications and achieve selectivity through tuning the particle size of AuNPs. DA could induce the aggregation of the AuNPs via hydrogen-bonding interactions, resulting in a color change from pink to blue which can be monitored by spectrophotometry or even the naked-eye. The proposed colorimetric probe works over the 0.1 to 4μM DA concentration range, with a lower detection limit (LOD) of 22nM, which is much lower than the therapeutic lowest abnormal concentrations of DA in urine (0.57μM) and blood (16μM) samples. Furthermore, the selectivity and potential applicability of the developed method in spiked actual biological (human plasma and urine) specimens were investigated, suggesting that the present assay could satisfy the requirements for clinical diagnostics and biosensors.

Wet-chemically prepared low-dimensional ZnO/Al2O3/Cr2O3 nanoparticles for xanthine sensor development using an electrochemical method

A reliable xanthine (XNT) chemical sensor was fabricated using a facile wet-chemical method (by co-precipitation) to prepare ZnO/Al₂O₃/Cr₂O₃ nanoparticles (NPs) in an alkaline medium at low temperature. Powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and ultraviolet-visible spectroscopy (UV-vis) were implemented for detailed characterization of the NPs. To fabricate the working electrode as a XNT chemical sensor probe, a glassy carbon electrode (GCE) with a 0.0316 cm² surface area was coated with an ethanolic slurry of the prepared ZnO/Al₂O₃/Cr₂O₃ NPs to make a thin layer and used to analyse XNT in a phosphate buffer system. To evaluate the analytical performances of the XNT chemical sensor, the calibration curve of XNT was plotted as the relationship of current versus the concentration of XNT. The plotted calibration curve was found to be linear over the LDR (linear dynamic range) of 0.05 nM to 5.0 μM. The assembled XNT electrochemical sensor exhibited the highest sensitivity (70.8861 μA μM⁻¹ cm⁻²), the lowest detection limit (1.34 ± 0.07 pM), good reproducibility performance with high accuracy and long-term stability with standard results under ambient conditions. This is a simple route to selectively detect XNT with wet-chemically prepared co-doped ZnO/Al₂O₃/Cr₂O₃ nanomaterials using a reliable electrochemical method at a large scale for safety within healthcare fields.

This is a simple route to detect the selective xanthine with wet-chemically prepared co-doped ZnO/Al₂O₃/Cr₂O₃ nanomaterials by reliable electrochemical method at large scales for the safety of healthcare fields.

Xanthine sensor development based on ZnO–CNT, ZnO–CB, ZnO–GO and ZnO nanoparticles: an electrochemical approach

The wet-chemical method was used to prepare the various ZnO–CNT, ZnO–CB, ZnO–GO nanocomposites, and ZnO nanoparticles in higher pH medium, which were finally utilized with 5% nafion to produce a thin film of NCs/Nafion/GCE sensor that has a faster response towards selected xanthine with higher sensitivity, lower detection limit, and large linear dynamic range by electrochemical approach.

Synthesis of cadmium oxide and carbon nanotube based nanocomposites and their use as a sensing interface for xanthine detection

Xanthine oxidase (XOD) was immobilized covalently via carbodiimide chemistry onto cadmium oxide nanoparticles (CdO)/carboxylated multiwalled carbon nanotube (c-MWCNT) composite film electrodeposited onto Au electrode.