Colorimetric and bare eye determination of urinary methylamphetamine based on the use of aptamers and the salt-induced aggregation of unmodified gold nanoparticles

Aptamer-based fluorescent sensor for highly sensitive detection of methamphetamine

The construction of a fluorescence aptamer sensor was achieved by employing the fundamental principle of fluorescence resonance energy transfer. By employing molecular modeling technologies to identify the binding site, the high-affinity aptamer APT-40nt was derived from the whole sequence and utilized on the graphene oxide (GO) fluorescent platform for the purpose of achieving a highly sensitive detection of methamphetamine (METH). The aptamer tagged with fluorescein (FAM) dye undergoes quenching in the presence of GO due to π-stacking interaction. With the addition of the target, the aptamer that has been tagged was detached from the GO surface, forming a stable complex with METH. This process resulted in fluorescence restoration of the system, and the degree of fluorescence restoration was proportional to METH concentration in the linear range of 1-50 and 50-200 nM. Notably, under optimized conditions, the detection limit of this aptasensor was as low as 0.78 nM, which meets the detection limit requirements of METH detection in saliva and urine in some countries and regions. Moreover, other common illicit drugs and metabolites had minimizing interference with the determination. The established aptasensor, therefore, has been successfully applied to detect METH in saliva and urine samples and exhibited satisfactory recoveries (87%-111%). This aptasensor has the advantages of low detection limit, excellent selectivity, ease of operation, and low cost, providing a promising strategy for on-site detection of METH in saliva and urine.

SERS and machine learning based effective feature extraction for detection and identification of amphetamine analogs

Surface-enhanced Raman spectroscopy (SERS) is extensively researched in diverse disciplines due to its sensitivity and non-destructive nature. It is particularly considered a potential and promising technology for rapid on-site screening in drug detection. In this investigation, a technique was developed for fabricating nanocrystals of Ag@Au SNCs. Ag@Au SNCs, as the basic material of SERS, can detect amphetamine at concentrations as low as 1 μg/mL. The Ag@Au SNCs exhibits a strong surface plasmon resonance effect, which amplifies molecular signals. The SERS spectra of ten substances, including amphetamine and its analogs, showed a strong peak signal. To establish a qualitative distinction, we examined the Raman spectra and conducted density functional theory (DFT) calculations on the ten aforementioned species. The DFT calculation enabled us to determine the vibrational frequency and assign normal modes, thereby facilitating the qualitative differentiation of amphetamines and its analogs. Furthermore, the SERS spectrum of the ten mentioned substances was analysed using the support vector machine learning algorithm, which yielded a discrimination accuracy of 98.0 %.

Wearable Electrochemical Glove-Based Analytical Device (eGAD) for the Detection of Methamphetamine Employing Silver Nanoparticles

Illicit drug misuse has become a widespread issue that requires continuous drug monitoring and diagnosis. Wearable electrochemical drug detection devices possess the potential to function as potent screening instruments in the possession of law enforcement personnel, aiding in the fight against drug trafficking and facilitating forensic investigations conducted on site. These wearable sensors are promising alternatives to traditional detection methods. In this study, we present a novel wearable electrochemical glove-based analytical device (eGAD) designed especially for detecting the club drug, methamphetamine. To develop this sensor, we immobilized meth aptamer onto silver nanoparticle (AgNPs)-modified electrodes that were printed onto latex gloves. The characteristics of AgNPs, including their shape, size and purity were analysed using FTIR, SEM and UV vis spectrometry, confirming the successful synthesis. The developed sensor shows a 0.1 µg/mL limit of detection and 0.3 µg/mL limit of quantification with a linear concentration range of about 0.01-5 µg/mL and recovery percentages of approximately 102 and 103%, respectively. To demonstrate its applicability, we tested the developed wearable sensor by spiking various alcoholic and non-alcoholic drink samples. We found that the sensor remains effective for 60 days, making it a practical option with a reasonable shelf-life. The developed sensor offers several advantages, including its affordability, ease of handling and high sensitivity and selectivity. Its portable nature makes it an ideal tool for rapid detection of METH in beverages too.

Paper-Based Electrodes Decorated with Silver and Zinc Oxide Nanocomposite for Electro-Chemical Sensing of Methamphetamine

We present the development of an electrochemical paper-based analytical device (ePAD) for the detection of methamphetamine. Methamphetamine is a stimulant that young people use as an addictive narcotic, and it must be detected quickly since it may be hazardous. The suggested ePAD has the advantages of being simple, affordable, and recyclable. This ePAD was developed by immobilizing a methamphetamine-binding aptamer onto Ag-ZnO nanocomposite electrodes. The Ag-ZnO nanocomposites were synthesized via a chemical method and were further characterized via scanning electron microscopy, Fourier transform infrared spectroscopy, and UV-vis spectrometry in terms of their size, shape, and colloidal activity. The developed sensor showed a limit of detection of about 0.1 μg/mL, with an optimum response time of about 25 s, and its extensive linear range was between 0.01 and 6 μg/mL. The application of the sensor was recognized by spiking different beverages with methamphetamine. The developed sensor has a shelf life of about 30 days. This cost-effective and portable platform might prove to be highly successful in forensic diagnostic applications and will benefit those who cannot afford expensive medical tests.

Progress on aptamer-based SERS sensors for food safety and quality assessment: methodology, current applications and future trends

It is well known that food safety has aroused extensive attentions from governments to researchers and to food industries. As a versatile technology based on molecular interactions, aptamer sensors which could specifically identify a wide range of food contaminants have been extensively studied in recent years. Surface-enhanced Raman spectroscopy integrated aptamer combines the advantages of both technologies, not only in the ability to specifically identify a wide range of food contaminants, but also in the ultra-high sensitivity, simplicity, portable and speed. To provide beneficial insights into the evaluation techniques in the field of food safety, we offer a comprehensive review on the design strategies for aptamer-SERS sensors in different scenarios, including non-nucleic acid amplification methods ("on/off" mode, sandwich mode, competition model and catalytic model) and nucleic acid amplification methods (hybridization chain reaction, rolling circle amplification, catalytic hairpin assembly). Meanwhile, a special attention is paid to the application of aptamer-SERS sensors in biological (foodborne pathogenic, bacteria and mycotoxins) and chemical contamination (drug residues, metal ions, and food additives) of food matrix. Finally, the challenges and prospects of developing reliable aptamer-SERS sensors for food safety were discussed, which are expected to offer a strong guidance for further development and extended applications.

Development of Nanomaterial-Modified Impedimetric Aptasensor—A Single-Step Strategy for 3,4-Methylenedioxymethylamphetamine Detection

Developing rapid, sensitive detection methods for 3,4-Methylenedioxymethylamphetamine (MDMA) is crucial to reduce its current misuse in the world population. With that aim, we developed an aptamer-modified tin nanoparticle (SnNP)-based nanoarchitecture as an electrochemical sensor in this study. This platform exhibited a high electron transfer rate with enhanced conductivity arising from its large surface area in comparison to the bare electrode. This observation was explained by the 40-fold higher electroactive surface area of SnNPs@Au, which provided a large space for 1.0 μM Apt_MDMA (0.68 ± 0.36 × 10¹² molecule/cm²) immobilization and yielded a significant electrochemical response in the presence of MDMA. Furthermore, the Apt_MDMA-modified SnNPs@Au sensing platform proved to be a simple yet ultrasensitive analytical device for MDMA detection in spiked biological and water samples. This novel electrochemical aptasensor showed good linearity in the range of 0.01–1.0 nM for MDMA (R² = 0.97) with a limit of detection of 0.33 nM and a sensitivity of 0.54 ohm/nM. In addition, the device showed high accuracy and stability along with signal recoveries in the range of 92–96.7% (Relative Standard Deviation, RSD, 1.1–2.18%). In conclusion, the proposed aptasensor developed here is the first to combine SnNPs and aptamers for illicit compound detection, and it offers a reliable platform for recreational drug detection.

Accounting for Interaction Kinetics between Gold Nanoparticles and Aptamers Enables High-Performance Colorimetric Sensors

DNA aptamers have emerged as promising probes for challenging analytes that cannot be easily detected by conventional probes, including small-molecule targets. Among the different signal transduction approaches, gold nanoparticle (AuNP) aggregation assays have been widely used to generate a colorimetric response from aptamer-target interactions. This sensor design relies on the competition between the aptamer adsorbing to the AuNP surface versus interacting with the target, whereby target binding reduces the number of adsorbed aptamers that destabilizes AuNPs toward salt-induced aggregation, thereby inducing a color change. However, this thermodynamic framework overlooks the potential influence of interaction kinetics of different aptamer conformations with AuNP surfaces and with targets in solution or near surfaces. Here, we show that aptamers become more strongly adsorbed on AuNPs over time, and these trapped aptamers are less responsive toward the target analyte. By varying the sequence of addition in sensing assays, we demonstrate that these interaction kinetics have a significant effect on the sensor response and thereby produce an effective sensor for methamphetamine (meth) at biologically relevant levels in oral fluids. Along with underpinning new tools for assay development, this new knowledge also highlights the need for aptamer selection strategies that evolve aptamer sequences based on the functionality that they need to exhibit in an actual sensor.

Rapid nanomolar detection of methamphetamine in biofluids via a reagentless electrochemical aptamer-based biosensor

The availability of sensing platforms able to rapidly measure abused drugs directly in biological fluids in a single step would allow performing drugged driving screening on the site. The achievement of this goal is extremely important for preventing and controlling drug abuse and crime incidence. Motived by this, we constructed a simple, cost-effective and reagentless electrochemical aptamer-based (EAB) sensor with methamphetamine (MAMP) as the target molecule. This EAB sensor produced a nanomolar level of detection accuracy in unprocessed or minimally processed bio-samples. Specifically, circular dichroic spectrum was used to confirm that the truncated aptamer from the original sequence would undergo large binding-induced conformational changes. We then engineered the aptamer to work in the EAB platform and the resulting sensor enabled sensitive and specific detection of MAMP with the detection limit of 30 nM in undiluted serum, 50 nM in undiluted urine and 20 nM in 50% saliva. The sensor has good recovery rate, implying this method has good reliability and repeatability. The detection limit is far below the clinical detection threshold, it would be hopefully used for preliminary screening of drugged driving in real world.

Development of gold nanoparticles-aptamer nanocomposite for multiplexed analysis of antibiotics and design of molecular logic gates

The widespread use of antibiotics caused severe problems of antibiotic residues in foodstuffs and water, posing a serious threat to public health and thus urging the development of sensitive, selective, and rapid detection methods for antibiotics. In this study, a fluorescence resonance energy transfer (FRET)-based system is developed for the multiplexed analysis of chloramphenicol (CAP) and streptomycin (Strep) with detection limits of 2.51 and 8.69μg l^-1, respectively. The FRET-based system consists of Cy3-tagged anti-CAP aptamer-conjugated gold nanoparticles (AuNPs) (referred to as AuNPs-AptCAP) and Cy5-tagged anti-Strep aptamer-conjugated AuNPs (referred to as AuNPs-AptStrep). In addition, AuNPs-AptCAP and AuNPs-AptStrep have been demonstrated to serve as signal transducers for implementing a series of logic operations such as YES, NOT, INH, OR, (2-4)-Decoder and even more complicated multi-level logic gates (OR-INH). Based on the outputs of logic operations, it could be figured out whether targeted analytes were present or not, thus enabling multiplex sensing and evaluation of pollution status. This proof of concept study might provide a new route for the enhanced sensing performance to distinguish different pollution status as well as the design of molecular mimics of logic elements to demonstrate better applicability.

Recent advances in developing optical and electrochemical sensors for analysis of methamphetamine: A review

Recognition of misused stimulant drugs has always been a hot topic from a medical and judicial perspective. Methamphetamine (MAMP) is an addictive and illegal drug that profoundly affects the central nervous system. Like other illicit drugs, the detection of MAMP in biological and street samples is vital for several organizations such as forensic medicine, anti-drug headquarters and diagnostic clinics. By emerging nanotechnology and exploiting nanomaterials in sensing applications, a great deal of attention has been given to the design of analytical sensors in MAMP tracing. For the first time, this study has briefly reviewed all the optical and electrochemical sensors in MAMP detection from earlier so far. How various receptors with engineering nanomaterials allow developing novel approaches to measure MAMP have been studied. Fundamental concepts related to optical and electrochemical recognition assays in which nanomaterials have been used and relevant MAMP sensing applications have been comprehensively covered. Challenges, opportunities and future outlooks of this field have also been discussed at the end.

Monoclonal Antibodies Application in Lateral Flow Immunochromatographic Assays for Drugs of Abuse Detection

Lateral flow assays (lateral flow immunoassays and nucleic acid lateral flow assays) have experienced a great boom in a wide variety of early diagnostic and screening applications. As opposed to conventional examinations (High Performance Liquid Chromatography, Polymerase Chain Reaction, Gas chromatography-Mass Spectrometry, etc.), they obtain the results of a sample's analysis within a short period. In resource-limited areas, these tests must be simple, reliable, and inexpensive. In this review, we outline the production process of antibodies against drugs of abuse (such as heroin, amphetamine, benzodiazepines, cannabis, etc.), used in lateral flow immunoassays as revelation or detection molecules, with a focus on the components, the principles, the formats, and the mechanisms of reaction of these assays. Further, we report the monoclonal antibody advantages over the polyclonal ones used against drugs of abuse. The perspective on aptamer use for lateral flow assay development was also discussed as a possible alternative to antibodies in view of improving the limit of detection, sensitivity, and specificity of lateral flow assays.

Surface-enhanced Raman spectroscopy integrated with aligner mediated cleavage strategy for ultrasensitive and selective detection of methamphetamine

New drugs and illicit synthesized mixtures detection at crime scenes is a great challenge for detection method, which requires anti-interference and ultrasensitive methods to detect methamphetamine (METH) in seized street samples and biological fluids. Herein, we constructed a surface-enhanced Raman sensing method based on aligner mediated cleavage (AMC) of nucleic acid for quantitative detection of METH for the first time. This method we proposed relied on AMC to achieve programmable sequence-specific cleavage of METH aptamer linked by gold nanoparticles (METH aptamer-Au NPs), the cleavage product-Au NPs conjugates (cleavage aptamer-Au NPs) would hybridize with complementary DNA (cDNA)-Au NPs, resulting in the aggregation of the Au NPs and concomitant plasmonic coupling effect. Besides, due to the base number of METH aptamer-Au NPs was decreased, the interparticle distance of the Au NPs was shortened, which increased the electric field enhancement factor. Thus, under the irradiation of the laser, rhodamine 6G (R6G) adsorbed on Au NPs generated a strong Raman signal. The detection limit reached 7 pM, the linear range was from 10 pM to 10 nM, and this detection method also showed good anti-interference ability and reproducibility in serum.

Nanomaterial-based aptamer sensors for analysis of illicit drugs and evaluation of drugs consumption for wastewater-based epidemiology

The abuse of illicit drugs usually associated with dramatic crimes may cause significant problems for the whole society. Wastewater-based epidemiology (WBE) has been demonstrated to be a novel and cost-effective way to evaluate the abuse of illicit drugs at the community level, and has been used as a routine method for monitoring and played a significant role for combating the crimes in some countries, e.g. China. The method can also provide temporal and spatial variation of drugs of abuse. The detection methods mainly remain on the conventional liquid chromatography coupled with mass spectrometry, which is extremely sensitive and selective, however needs advanced facility and well-trained personals, thus limit it in the lab. As an alternative, sensors have emerged to be a powerful analytical tool for a wide spectrum of analytes, in particular aptamer sensors (aptasensors) have attracted increasing attention and could act as an efficient tool in this field due to the excellent characteristics of selectivity, sensitivity, low cost, miniaturization, easy-to-use, and automation. In this review, we will briefly introduce the context, specific assessment process and applications of WBE and the recent progress of illicit drug aptasensors, in particular focusing on optical and electrochemical sensors. We then highlight several recent aptasensors for illicit drugs in new technology integration and discuss the feasibility of these aptasensor for WBE. We will summarize the challenges and propose our insights and opportunity on aptasensor for WBE to evaluate community-wide drug use trends and public health.

Wettability read-out strategy for aptamer target binding based on a recognition/hydrophobic bilayer surface

We established a wettability read-out strategy for an aptasensor with a bilayer surface, using hydrophobicity reduction as the signal. The signal was induced by a fracture of the nanoneedle layer resulting from recognition by the supporting aptamer layer. The kinetics and influencing factors of this process were investigated with time curves.

Noble Metal Nanostructured Materials for Chemical and Biosensing Systems

Nanomaterials with unique physical and chemical properties have attracted extensive attention of scientific research and will play an increasingly important role in the future development of science and technology. With the gradual deepening of research, noble metal nanomaterials have been applied in the fields of new energy materials, photoelectric information storage, and nano-enhanced catalysis due to their unique optical, electrical and catalytic properties. Nanostructured materials formed by noble metal elements (Au, Ag, etc.) exhibit remarkable photoelectric properties, good stability and low biotoxicity, which received extensive attention in chemical and biological sensing field and achieved significant research progress. In this paper, the research on the synthesis, modification and sensing application of the existing noble metal nanomaterials is reviewed in detail, which provides a theoretical guidance for further research on the functional properties of such nanostructured materials and their applications of other nanofields.

A novel colorimetric immunoassay based on enzyme-regulated instant generation of Turnbull's blue for the sensitive determination of ochratoxin A

The aim of this study was to develop a novel colorimetric sensing method based on enzyme-regulated instant generation of Turnbull's blue, serving as a chromogenic agent, for a sensitive immunoassay for the determination of ochratoxin A (OTA).

Rapid duplexed detection of illicit drugs in wastewater using gold nanoparticle conjugated aptamer sensors

The abuse of illicit drug addiction is a worldwide public health and social problem. In this paper, we reported on a simple and rapid colorimetric biosensor for duplexed detection of methamphetamine (METH) and cocaine in a single assay. Gold nanoparticles (AuNPs) and Au@Ag NPs were synthesized and functionalized with DNA reporter probes (RPs) for METH and cocaine, respectively. The magnetic beads (MBs) were conjugated with two capture probes (CPs) respective to METH and cocaine. The respective RPs and CPs were designed to hybridize with each illicit drug-binding DNA aptamers through DNA-DNA hybridization, forming a sandwich structure. This MBs-based sandwich structure could be removed with an external magnetic field. However, due to the higher affinity of DNA aptamers with illicit drugs, the sandwich structure was disassembled when illicit drugs are introduced into the solution, leading to the colour changes of the supernatant. Utilizing a non-negative matrix factorization (NMF) algorithm to process the data, we demonstrated the ability of our biosensor for the simultaneous quantification of two illicit drugs. Under the optimal condition, our sensors were able to detect both METH and cocaine at the nM level with a wide dynamic range. This sensing platform provides a huge potential on drug consumption evaluation at the community level for wastewater-based epidemiology.

A Bottom-Up Approach for Developing Aptasensors for Abused Drugs: Biosensors in Forensics

Aptamer-based point-of-care (POC) diagnostics platforms may be of substantial benefit in forensic analysis as they provide rapid, sensitive, user-friendly, and selective analysis tools for detection. Aptasensors have not yet been adapted commercially. However, the significance of the applications of aptasensors in the literature exceeded their potential. Herein, in this review, a bottom-up approach is followed to describe the aptasensor development and application procedure, starting from the synthesis of the corresponding aptamer sequence for the selected analyte to creating a smart surface for the sensitive detection of the molecule of interest. Optical and electrochemical biosensing platforms, which are designed with aptamers as recognition molecules, detecting abused drugs are critically reviewed, and existing and possible applications of different designs are discussed. Several potential disciplines in which aptamer-based biosensing technology can be of greatest value, including forensic drug analysis and biological evidence, are then highlighted to encourage researchers to focus on developing aptasensors in these specific areas.

Development and Application of Aptamer-Based Surface-Enhanced Raman Spectroscopy Sensors in Quantitative Analysis and Biotherapy

Surface-enhanced Raman scattering (SERS) is one of the most special and important Raman techniques. An apparent Raman signal can be observed when the target molecules are absorbed onto the surface of the SERS substrates, especially on the "hot spots" of the substrates. Early research focused on exploring the highly active SERS substrates and their detection applications in label-free SERS technology. However, it is a great challenge to use these label-free SERS sensors for detecting hydrophobic or non-polar molecules, especially in complex systems or at low concentrations. Therefore, antibodies, aptamers, and antimicrobial peptides have been used to effectively improve the target selectivity and meet the analysis requirements. Among these selective elements, aptamers are easy to use for synthesis and modifications, and their stability, affinity and specificity are extremely good; they have been successfully used in a variety of testing areas. The combination of SERS detection technology and aptamer recognition ability not only improved the selection accuracy of target molecules, but also improved the sensitivity of the analysis. Variations of aptamer-based SERS sensors have been developed and have achieved satisfactory results in the analysis of small molecules, pathogenic microorganism, mycotoxins, tumor marker and other functional molecules, as well as in successful photothermal therapy of tumors. Herein, we present the latest advances of the aptamer-based SERS sensors, as well as the assembling sensing platforms and the strategies for signal amplification. Furthermore, the existing problems and potential trends of the aptamer-based SERS sensors are discussed.

Homogeneous and high-density gold unit implanted optical labels for robust and sensitive point-of-care drug detection

Controllable integration of gold building blocks into mesoscopic architecture produces improved optical signals with preferable stability for biological sensing. Here, we developed novel optical labels with homogeneous and high-density implanted hydrophobic gold nanoparticles (AuNPs) throughout three-dimensional silica scaffolds. The dendritic silica supports with an extra-large pore size and highly accessible central-radial channels were employed as metal-affinity templates, for anchoring with AuNPs directly from the organic phase. The nano-assemblies exhibited a high unit loading capacity while maintaining the intrinsic optical characteristics of AuNPs. After phase transfer by the alkylsilane intermediate layer and exterior silica shell encapsulation, the nanocomposites revealed an amplified plasmonic absorption signal, excellent colloidal/optical stability and convenient surface functionalization. By integrating the silica labels into the lateral flow immunoassay strip for signal enhancement, the sensitive point-of-care detection of methamphetamine in urine was established. The limit of detection achieved 0.026 ng mL-1, with a detection range from 0.023 to 375 ng mL-1 in a 10 min assay, allows both visual and on-site quantitative analysis. Encouragingly, the potential interfering drugs in the sample matrix showed a negligible influence on the results, validating the superior specificity of the current immunoassay. The newly developed gold-implanted optical labels show prospects for point-of-care testing in a complex biological matrix with the desirable stability and signal amplification.

Selection and Identification of Novel Aptamers Specific for Clenbuterol Based on ssDNA Library Immobilized SELEX and Gold Nanoparticles Biosensor

We describe a multiple combined strategy to discover novel aptamers specific for clenbuterol (CBL). An immobilized ssDNA library was used for the selection of specific aptamers using the systematic evolution of ligands by exponential enrichment (SELEX). Progress was monitored using real-time quantitative PCR (Q-PCR), and the enriched library was sequenced by high-throughput sequencing. Candidate aptamers were picked and preliminarily identified using a gold nanoparticles (AuNPs) biosensor. Bioactive aptamers were characterized for affinity, circular dichroism (CD), specificity and sensitivity. The Q-PCR amplification curve increased and the retention rate was about 1% at the eighth round. Use of the AuNPs biosensor and CD analyses determined that six aptamers had binding activity. Affinity analysis showed that aptamer 47 had the highest affinity (Kd = 42.17 ± 8.98 nM) with no cross reactivity to CBL analogs. Indirect competitive enzyme linked aptamer assay (IC-ELAA) based on a 5′-biotin aptamer 47 indicated the limit of detection (LOD) was 0.18 ± 0.02 ng/L (n = 3), and it was used to detect pork samples with a mean recovery of 83.33–97.03%. This is the first report of a universal strategy including library fixation, Q-PCR monitoring, high-throughput sequencing, and AuNPs biosensor identification to select aptamers specific for small molecules.

Optical assays based on colloidal inorganic nanoparticles

Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays. A large number of these assays rely on the ability of gold nanoparticles (AuNPs, in the 20 nm diameter size range) to undergo a color change from red to blue upon aggregation. AuNP assays can be based on cross-linking, non-cross linking or unmodified charge-based aggregation. Nucleic acid-based probes, monoclonal antibodies, and molecular-affinity agents can be attached by covalent or non-covalent means. Surface plasmon resonance and SERS techniques can be utilized. Silver NPs also have attractive optical properties (higher extinction coefficient). Combinations of AuNPs and AgNPs in nanocomposites can have additional advantages. Magnetic NPs and ZnO, TiO2 and ZnS as well as insulator NPs including SiO2 can be employed in colorimetric assays, and some can act as peroxidase mimics in catalytic applications. This review covers the synthesis and stabilization of inorganic NPs and their diverse applications in colorimetric and optical assays for analytes related to environmental contamination (metal ions and pesticides), and for early diagnosis and monitoring of diseases, using medically important biomarkers.

A fluorometric aptasensor for methamphetamine based on fluorescence resonance energy transfer using cobalt oxyhydroxide nanosheets and carbon dots

Cobalt oxyhydroxide (CoOOH) nanosheets are efficient fluorescence quenchers due to their specific optical properties and high surface area. The combination of CoOOH nanosheets and carbon dots (CDs) has not been used in any aptasensor based on fluorescence quenching so far. An aptamer based fluorometric assay is introduced that is making use of fluorescent CDs conjugated to the aptamer against methamphetamine (MTA), and of CoOOH nanosheets which reduce the fluorescence of the CDs as a quencher. The results revealed that the conjugated CDs with aptamers were able to enclose the CoOOH nanosheets. Consequently, fluorescence is quenched. If the aptamer on the CD binds MTA, the CDs are detached from CoOOH nanosheets. As a result, fluorescence is restored proportionally to zhe MTA concentration. The fluorometric limit of detection is 1 nM with a dynamic range from 5 to 156 nM. The method was validated by comparing the results obtained by the new method to those obtained by ion mobility spectroscopy. Theoretical studies showed that the distance between CoOOH nanosheet and C-Ds is approximately 7.6 Å which can illustrate the possibility of FRET phenomenon. The interactions of MTA and the aptamer were investigated using molecular dynamic simulation (MDS). Graphical abstract Carbon dots (C-Ds) were prepared from grape leaves, conjugated to aptamer, and adsorbed on CoOOH nanosheets. So, the fluorescence of C-Ds is quenched. On addition of MTA, fluorescence is restored.

Chromogenic and Fluorogenic Probes for the Detection of Illicit Drugs

The consumption of illicit drugs has increased exponentially in recent years and has become a problem that worries both governments and international institutions. The rapid emergence of new compounds, their easy access, the low levels at which these substances are able to produce an effect, and their short time of permanence in the organism make it necessary to develop highly rapid, easy, sensitive, and selective methods for their detection. Currently, the most widely used methods for drug detection are based on techniques that require large measurement times, the use of sophisticated equipment, and qualified personnel. Chromo- and fluorogenic methods are an alternative to those classical procedures.

Aptamer-modified carbon nanomaterial based sorption coupled to paper spray ion mobility spectrometry for highly sensitive and selective determination of methamphetamine

A cellulose paper was modified with an aptamer against methamphetamine on either carbon dots (CDs) or on multichannel carbon nanotubes (CNTs). The resulting sorbent was applied to the extraction of METH from blood or saliva. The METH-loaded paper than also was directly applied as a paper spray ionization source in ion mobility spectrometry. The carbon nanomaterial enhances sensitivity, and the aptamer enhances selectivity. The materials were covalently bound to the paper on one side, while the aptamer was immobilized on the other. After optimization of the extraction process and instrumental parameters, the limits of detection when using the aptamer-CNT modified paper are 0.6 ng·mL^-1 for saliva, and 0.45 ng·mL^-1 for plasma. The respective values when using aptamer-CD modified paper are 1.5 ng·mL^-1 for saliva and 0.9 ng·mL^-1 for plasma. Calibration plots are linear in the 2 to 150 ng·mL^-1 METH concentration range for saliva, and in the 1.5 to 200 ng·mL^-1 concentration ranges for blood when using the aptamer-CNT based method. When using the aptamer-CDs, the dynamic ranges extend from 5 to 200 ng·mL^-1 and from 3 to 250 ng·mL^-1, respectively. The method was applied to the determination of METH in real samples of saliva and blood, and the accuracy of the method was confirmed by comparison of the results with data analyzed by GC-MS. Graphical abstract ᅟ.

Trends in aptamer selection methods and applications

Aptamers are target specific ssDNA, RNA or peptide sequences generated by an in vitro selection and amplification method called SELEX (Systematic Evolution of Ligands by EXponential Enrichment), which involves repetitive cycles of binding, recovery and amplification steps. Aptamers have the ability to bind with a variety of targets such as drugs, proteins, heavy metals, and pathogens with high specificity and selectivity. Aptamers are similar to monoclonal antibodies regarding their binding affinities, but they offer a number of advantages over the existing antibody-based detection methods, which make the aptamers promising diagnostic and therapeutic tools for future biomedical and analytical applications. The aim of this review article is to provide an overview of the recent advancements in aptamer screening methods along with a concise description of the major application areas of aptamers including biomarker discovery, diagnostics, imaging and nanotechnology.

G-quadruplex–hemin DNAzyme molecular beacon probe for the detection of methamphetamine

In this work, a simple, cost-effective, and label-free biosensor was constructed for methamphetamine (METH) detection.