A nanocomposite consisting of graphene oxide and Fe3O4 magnetic nanoparticles for the extraction of flavonoids from tea, wine and urine samples

Determination of bioactive flavonoids using β-cyclodextrin combined with chitosan-modified magnetic nanoparticles

To accurately determine flavonoids (rutin, quercetin or kaempferol), it is necessary to extract them from complex matrices. The ultrasound-assisted magnetic dispersion microsolid phase extraction technique has been predominantly used for separation and enrichment of the target analytes. The combination of magnetic chitosan nanoparticles and a deep eutectic supramolecular solvent (DESP) is likely to enhance the efficiency of flavonoid extraction from food. In this study, adsorbents were prepared by modifying chitosan with magnetic nanoparticles, and the eluent was a DESP derived from β-cyclodextrin and an organic acid. The successful preparation of these materials was confirmed by FTIR, XRD, FE-SEM and 1H NMR. The extraction recovery rates exceeded 93 %, with limits of detection and quantitation ranging from 0.9 to 2.4 μg/L and 2.7 to 7.2 μg/L, respectively, and the flavonoid clearance rates for ABTS and DPPH radicals reached 100 %. Therefore, the integration of magnetic chitosan nanoparticles with the DESP provides a new and efficient method for the extraction of flavonoids while also presenting a potential application of the DESP in separations.

A stable core-shell metal-organic framework@covalent organic framework composite as solid-phase extraction adsorbent for selective enrichment and determination of flavonoids

Hydrophobization and stability is crucial for the practical application of most metal-organic frameworks (MOFs) in extraction technique. In this study, a stable core-shell MOF@COF composite (NH2-MIL-101(Fe)@TAPB-FPBA-COF) was successfully prepared by Schiff base reaction and applied to solid-phase extraction (SPE) of hydrophobic flavonoids. Notably, the TAPB-FPBA-COF shell acts as a hydrophobic "shield", which not only improves the hydrophobicity and stability of hydrophilic NH2-MIL-101(Fe), but also makes the extraction efficiency of flavonoids from MOF@COF composite significantly higher than that of pure NH2-MIL-101(Fe) and TAPB-FPBA-COF. In addition, a sensitive analytical method with excellent linearities (0.1-500 ng mL-1, R2 ≥ 0.9967), low limits of detection (0.02-0.04 ng mL-1 for water; 0.04-0.07 ng mL-1 for grape juice; 0.06-0.08 ng mL-1 for honey), good repeatability (intra-day/inter-day precision are 1.86-5.37%/1.82-7.79%, respectively) and only 5 mg of adsorbent per cartridge was established by optimizing the SPE process combined with high performance liquid chromatography with ultraviolet-visible detector (HPLC-UV). Meanwhile, selectivity study and comparative experiments with the commercial C18 adsorbent showed that the MOF@COF adsorbent exhibited satisfactory extraction efficiency for flavonoids due to multiple interactions such as hydrogen bonding, hydrophobic, and π-π interactions. Finally, the good recoveries in grape juice (84.5-102.5%) and honey (87.5-104.6%) samples further validated the applicability of the proposed method in complex samples.

Synthesis of Modified Magnetic Graphene Oxide with Mesoporous Silica for Extraction of the Pharmaceutical Compound Quercetin

In this study, magnetic mesoporous silica-Fe3O4-graphene oxide nanoparticles (Fe3O4@GO@mSiO2) were synthesized and used as sorbents for magnetic solid-phase extraction (MSPE) of trace amounts of quercetin in natural samples (spinach, green pepper, dill, and red onion). The sorbent produced was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction (XRD), vibrating sample magnetometry (VSM), and X-ray photoelectron spectroscopy (XPS). The effects of various experimental factors on the percent recovery of quercetin, including extraction time, desorption time, sample solution pH, and adsorbent amount were investigated. The Fe3O4@GO@mSiO2 strategy showed excellent stability and sensitivity for the determination of quercetin, with a suitable linear range of 20-800 µg L-1 and a detection limit of 5.2 µg L-1. The data indicate that Fe3O4@GO@mSiO2 has a specific surface area and suitable adsorption capacity for the determination of quercetin.

Recent Advances in Solid-Phase Extraction as a Platform for Sample Preparation in Biomarker Assay

Low levels of biomarkers and the complexity of bio sample make the analytical assay of several biomarkers a challenging issue. Suitable sample preparation run remain a vital part of the puzzle of diagnostic level. Enhancing the detection limit of bioanalytical methods start during the sample preparation procedure. A robust sample preparation method is needed to evaluate the number of biomarkers. As worldwide environmental issues attract expanding consideration, all the more harmless to the ecosystem investigations are liked. Solid-phase extraction (SPE) is an appealing strategy among the sample treatment methods due to the versatility of sorbent materials, less solvent consumption, and compatibility with analytical devices. Miniaturization of the SPE gives the chance to integrate the other analytical steps in a single run, known as an easy-to-use and effective method. SPE utilizes various SPE sorbent beds such as packed beads, porous polymer monoliths, molecularly imprinted polymers, membranes, or other magnetic form microstructures to achieve high surface-to-volume ratio and appropriate chemical properties effective extraction. Also, SPE is the methodology of interest to fulfill high recovery and efficiency demands. In this review, we intend to explain more recent methods for the rational design of SPE and miniaturized SPE to determine biomarkers from biological media. The headlines are subdivided into (1) packing materials in SPE, (2) setups for sample preparation by magnetic SPE, and (3) and future perspective for the application of SPE in sample preparation for analysis of biomarkers.

Comparative investigation of bioflavonoid electrocatalysis in 1D, 2D, and 3D carbon nanomaterials for simultaneous detection of naringin and hesperidin in fruits

Electrocatalysis of bioflavonoids in carbon nanomaterials plays an important role in electrochemical sensors for the detection of their content in fruits. In this study, three types of carbon nanomaterials with 1D, 2D, and 3D structures, namely carbon nanotubes (CNTs), graphene oxide (GO), and Ketjen black (KB), were modified onto glassy carbon electrodes for the electrocatalysis of hesperidin and naringin, which are two important bioflavonoids in fruits. As a result, the CNT-modified electrodes showed the highest electrocatalytic activity for both hesperidin and naringin compared to GO and KB. The morphology and surface chemistry of the carbon nanomaterials were characterized. The structural defects and carbon status of carbon nanomaterials are proposed to be the most important factors affecting the electrocatalysis of hesperidin and naringin. Finally, a CNT-based electrochemical sensor was fabricated to simultaneously detect hesperidin and naringin. Real sample tests on the fruit extract of Citrus grandis "Tomentosa" show that the proposed electrochemical sensors with high recovery thus could be employed in practical applications.

The Potential of Microextraction Techniques for the Analysis of Bioactive Compounds in Food

For a long time, the importance of sample preparation and extraction in the analytical performance of the most diverse methodologies have been neglected. Cumbersome techniques, involving high sample and solvent volumes have been gradually miniaturized from solid-phase and liquid-liquid extractions formats and microextractions approaches are becoming the standard in different fields of research. In this context, this review is devoted to the analysis of bioactive compounds in foods using different microextraction approaches reported in the literature since 2015. But microextraction also represents an opportunity to mitigate the environmental impact of organic solvents usage, as well as lab equipment. For this reason, in the recent literature, phenolics and alkaloids extraction from fruits, medicinal herbs, juices, and coffee using different miniaturized formats of solid-phase extraction and liquid-liquid microextraction are the most popular applications. However, more ambitious analytical limits are continuously being reported and emergent sorbents based on carbon nanotubes and magnetic nanoparticles will certainly contribute to this trend. Additionally, ionic liquids and deep eutectic solvents constitute already the most recent forefront of innovation, substituting organic solvents and further improving the current microextraction approaches.

Development of magnetic solid phase extraction based on magnetic chitosan-graphene oxide nanoparticles and deep eutectic solvents for the determination of flavonoids by high performance liquid chromatography

An environmentally friendly magnetic solid phase extraction method was developed based on magnetic chitosan-graphene oxide nanoparticles and deep eutectic solvents (DESs) for the pre-concentration and isolation of flavonoids (apigenin, morin, naringenin, and quercetin) of natural orange juice, commercial apple juice, onion juice, green tea, and natural apple juice samples. DESs via hydrophilic and π-π interactions could increase the extraction performance. The immobilization of chitosan-graphene oxide on the surface of Fe₃O₄ nanoparticles improved their chemical properties and mechanical stability. In addition, the prepared magnetic nanoparticles with the hydrophilic polymeric network and the high surface area of the graphene oxide increased the access of binding sites and extraction performance. The use of DESs as desorption of solvent and the individual properties of MANPs provided the ability for high extraction recovery and accelerates the time to reach equilibrium. The principal variables that influence microextraction efficiency, including the extraction time, type of DES, stirring rate, desorption time, type of eluent solvent, and pH of the sample solution, were screened via the Plackett-Burman design and then the variables were optimized by the Box-Behnken design. Under the optimum conditions obtained, the developed method showed a good working range (R² ≥ 0.9962). The limit of detection (LOD) and the limit of quantification (LOQ) ranged from 0.03 μg L^-1 (morin) to 0.14 μg L^-1 (naringenin) and from 0.09 μg L^-1 (morin) to 0.46 μg L^-1 (naringenin) variables, respectively. The intraday precision was in the range of 4.1-4.8. In order to experiment with the precision and applicability of the MSPE-DES method, spiking recovery studies were performed in beverages and vegetable samples (natural orange juice, onion juice, commercial apple juice, natural apple juice, and green tea). The recovery results for real samples were calculated as 90-102%.

Simple and Efficient Detection Approach of Quercetin from Biological Matrix by Novel Surface Imprinted Polymer Based Magnetic Halloysite Nanotubes Prepared by a Sol-Gel Method

Molecular imprinted polymers coated magnetic halloysite nanotubes (MHNTs-MIPs) were prepared through sol-gel method by using quercetin (Que), APTES and TEOS as template, monomer and cross-linker agent, respectively. The synthesized MHNTs-MIPs were characterized by fourier transform infrared, scanning electron microscope, transmission electron microscope, XRD and vibrating sample magnetometer. Various parameters influencing the binding capacity of the MHNTs-MIPs were investigated with the help of response surface methodology. Selectivity experiments showed that the MHNTs-MIPs exhibited the maximum selective rebinding to Que. Therefore, the MHNTs-MIPs was applied as a solid-phase extraction adsorbent for the extraction and preconcentration of quercetin and luteolin in serum and urine samples. The limits of detection for quercetin and luteolin range from 0.51 to 1.32 ng mL-1 in serum and from 0.23 to 1.05 ng mL-1 in urine, the recoveries are between 95.20 and 103.73% with the RSD less than 5.77%. While the recovery hardly decreased after several cycles. The designed MHNTs-MIP with high affinity, sensitivity and maximum selectivity toward Que in SPE might recommend a novel method for the extraction of flavonoids in other samples like natural products.

Solvent-free mechanochemical preparation of graphene oxide-Fe3 O4 and its application in magnetic dispersive solid-phase extraction of illegal dyes in food samples

A simple, green, and efficient mechanochemical approach was developed herein to prepare tunable magnetic graphene oxide nanoparticles. The obtained nanoparticles were successfully used as adsorbents in a magnetic dispersive solid-phase extraction method to extract three cationic dyes (i.e., thioflavine T, auramine-O, and basic orange 2) found in food samples. Our proposed approach also utilized high-performance liquid chromatography with ultraviolet detection. Several key variables affecting the extraction recovery were investigated. These included the sample pH, amount of extractant, extraction time, sample volume, elution solvent type and volume, and the stability and reusability of the magnetic graphene oxide nanoparticles. Under optimized conditions, the calibration curve was linear at a concentration range of 0.005-1.0 μg/mL with a correlation coefficient of 0.9992-0.9996. Moreover, the limits of detection were determined at 0.97-1.35 μg/mL. The extraction mechanism was investigated via ultraviolet-visible spectrophotometry and zeta-potential analyses. The developed method was used to analyze the above-mentioned cationic dyes in bean products and yellow fish samples. Notably, satisfactory spiked recoveries ranging from 90.7 to 104.9% were achieved.

ZnO nanorods/Fe3O4-graphene oxide/metal-organic framework nanocomposite: recyclable and robust photocatalyst for degradation of pharmaceutical pollutants

Nanosized semiconductors are widely utilized as solar energy based photocatalyst. However, the deficiencies such as poor adsorption toward contaminants and recyclability issues, rapid recombination of photo-introduced radicals, and deactivation by scavengers are still be the obstacle. To addressing those obstacles, zeolitic imidazolate framework-8 (ZIF-8), photosensitive ZnO, and paramagnetic Fe₃O₄ were anchored on conductive graphene oxide (GO) to prepare a nanocomposite photocatalyst ZnO/Fe₃O₄-GO/ZIF. The photocatalyst showed good robustness to scavengers of hydroxyl radicals (OH^•), superoxide radicals (O₂^•-), and hole (h⁺) with hydrophobic ZIF-8 modified surface. Finally, four pharmaceuticals (sulfamethazine, metronidazole, norfloxacin, and 4-acetaminophen) were degraded rapidly under simulated solar irradiation for 1 h, and the photocatalyst could be recycled at least ten times without obvious deactivation. The final results show that combination of semiconductor, graphene oxide and ZIF-8 is a good idea for construction of efficient photocatalyst. It offers new views in interface modification of nanomaterials, photocatalysis, and adsorption.

Simple and efficient method for the quantification of antiepileptic drugs in human plasma by using magnetic graphene oxide-β-cyclodextrin composite as a sorbent

Background

In recent days, solid-phase extraction methods are widely utilized for the extraction of drug molecules from plasma samples due to their easy operating procedures and low matrix effect. The trace-level solid-phase extraction of three structurally related antiepileptic drugs brivaracetam (BVC), eslicarbazepine acetate (ESL), and carbamazepine (CBZ) was investigated by using a magnetic porous material graphene oxide-β-cyclodextrin (MGO-CD). Morphology, magnetic properties, and structure of the synthesized MGO-CD were characterized by using FT-IR, SEM, XRD, and VSM.

Results

Solid-phase extraction (SPE) methods were used to extract the analytes from human plasma. Different extraction solvents such as acetonitrile (ACN), methanol (MeOH), acetone, chloroform (CHCl3), tertiary butyl diethyl ether (TBDE), and ethyl acetate (EtOAc) with variable polarities were used to extract drug molecules from MGO-CD. The linearity analysis showed good correlation coefficient values (R2) of 0.9989, 0.9995, and 0.9982 for BVC, ESL, and CBZ respectively. The LOD and LOQ ranges were found to be 6.14–28.32 ng mL−1 and 20.45–94.31 ng mL−1 respectively.

Conclusion

The high accuracy and precision made the developed HPLC method with MGO-CD a suitable alternative for the bioequivalence study of BVC, ESL, and CBZ in human plasma. This developed HPLC-UV method has good efficiency for recoveries and good linearity and is simple to handle. And also, it gave low retention time for the three antiepileptic drugs within 8 min. It provides high efficiency for the extraction of trace-level substances from human plasma.

New insights into the degradation of synthetic pollutants in contaminated environments

The environment is contaminated by synthetic contaminants owing to their extensive applications globally. Hence, the removal of synthetic pollutants (SPs) from the environment has received widespread attention. Different remediation technologies have been investigated for their abilities to eliminate SPs from the ecosystem; these include photocatalysis, sonochemical techniques, nanoremediation, and bioremediation. SPs, which can be organic or inorganic, can be degraded by microbial metabolism at contaminated sites. Owing to their diverse metabolisms, microbes can adapt to a wide variety of environments. Several microbial strains have been reported for their bioremediation potential concerning synthetic chemical compounds. The selection of potential strains for large-scale removal of organic pollutants is an important research priority. Additionally, novel microbial consortia have been found to be capable of efficient degradation owing to their combined and co-metabolic activities. Microbial engineering is one of the most prominent and promising techniques for providing new opportunities to develop proficient microorganisms for various biological processes; here, we have targeted the SP-degrading mechanisms of microorganisms. This review provides an in-depth discussion of microbial engineering techniques that are used to enhance the removal of both organic and inorganic pollutants from different contaminated environments and under different conditions. The degradation of these pollutants is investigated using abiotic and biotic approaches; interestingly, biotic approaches based on microbial methods are preferable owing to their high potential for pollutant removal and cost-effectiveness.

Analytical determinations of luteolin

Plants, through the photosynthesis process, produce the substances necessary for all the life cycles of nature, which are called "primary metabolites." Moreover, there are some plants that synthesize, in addition to these, other substances with more specific functions, which are known as "secondary metabolites." It is inside this group that flavonoids are located, whose main function is to protect organisms from damage caused by different oxidizing agents. Luteolin (3,4,5,7-tetrahydroxy-flavone) belongs to the sub-class of flavonoids known as flavones and is one of 10,000 flavonoids currently known, being one of the most bio-active flavonoids. Its various beneficial properties for health, together with the increasing reduction in the use of synthetic antioxidants, make the study of luteolin a very active field. Within this, the quantification of this molecule has become a subject of very special interest given that it is transversal to all fields. In this review article, we aim to give the reader a broad and deep vision of this topic, focusing on the events reported in the last 5 years and covering all possible techniques related to analytical determinations. We will discuss in terms of advantages and disadvantages between techniques, selectivity, sensitivity, costs, time consumption, and reagents as well as in the complexity of operations.

Rapid screening and separation of active compounds against α-amylase from Toona sinensis by ligand fishing and high-speed counter-current chromatography

In the present study, an efficient method based on ligand fishing and high-speed counter-current chromatography (HSCCC) was established to screen, enrich and separate the active components with the α-amylase inhibitory activity from a traditional dish Toona sinensis. The active components were screened from T. sinensis by ligand fishing using the magnetic immobilized α-amylase prepared through solvothermal and crosslinking methods. HSCCC was used to separate the target compound according to the K value. As a result, a potential active compound 1,2,3,4,6-penta-O-galloyl-β-d-glucose and a non-target compound quercetin-3-O-α-L-rhamnopyranoside were separated and identified. In-vitro experiments indicated that 1,2,3,4,6-penta-O-galloyl-β-d-glucose had the activity against α-amylase and the IC₅₀ value was 93.49 ± 0.80 μg/mL which was higher than that of the non-target compound. The result further confirmed the molecular fishing effect of magnetic immobilized α-amylase. The present study can not only find and separate the hypoglycemic substances in T. sinensis quickly and effectively, but also can provide a new approach for the study of natural active components.

Development of magnetic dispersive micro-solid phase extraction based on magnetic agarose nanoparticles and deep eutectic solvents for the isolation and pre-concentration of three flavonoids in edible natural samples

In the present study, an environmentally friendly magnetic dispersive micro-solid phase extraction was developed based on magnetic agarose nanoparticles and deep eutectic solvents for the isolation and pre-concentration of three flavonoids (morin, quercetin, and kaempferol) from dark tea, chocolate, vegetable, and fruit juice samples. In this method, deep eutectic solvents were synthesized from less toxic and low-cost substances under feasible conditions and used as eluents in the desorption process. These solvents can be considered as a green alternative to traditional organic reagents to increase the adsorption capacity and reduce the matrix interferences, dangerous waste generation and environmental pollution. A Plackett-Burman design was employed for screening the experimental variables. The effective variables were then optimized by Box-Behnken design (BBD). Under the optimial conditions, the presented method demonstrated wide linear ranges of 1-500 μg. L^-1 for morin and quercetin, and 5-500 μg. L^-1 for kaempferol with satisfactory recoveries above 91%. Limit of detections (LODs) and quantifications (LOQs) of flavonoids varied in 0.2-1.1 μg. L^-1 and 0.66-3.63 μg. L^-1, respectively. The precision of the proposed method was the range of 2.6-5.7%.

Review: Microextraction Technique Based New Trends in Food Analysis

Food chemistry is the study and classification of the quality and origin of foods. The identification of definite biomarkers and the determination of residue contaminants such as toxins, pesticides, metals, human and veterinary drugs, which are a very common source of food-borne diseases. The food analysis is continuously demanding the improvement of more robust, sensitive, highly efficient, and economically beneficial analytical approaches to promise the traceability, safety, and quality of foods in the acquiescence with the consumers and legislation demands. The traditional methods have been used at the starting of the 20th century based on wet chemical methods. Now it existing the powerful analytical techniques used in food analysis and safety. This development has led to substantial enhancements in the analytical accuracy, precision, sensitivity, selectivity, thereby mounting the applied range of food applications. In the present decade, microextraction (micro-scale extraction) pays more attention due to its futures such as low consumption of solvent and sample, throughput analysis easy to operate, greener, robotics, and miniaturization, different adsorbents have been used in the microextraction process with unique nature recognized with wide range applications.

A new hybrid nanocomposite electrode based on Au/CeO2-decorated functionalized glassy carbon microspheres for the voltammetric sensing of quercetin and its interaction with DNA

A new hybrid composite containing cerium oxide nanoparticle (CeO2NP) and gold nanoparticle (AuNP)-decorated functionalized glassy carbon microspheres (FGCM) was synthesized (Au/CeO2@FGCM). As a result, an Au/CeO2@FGCM-paraffin oil paste electrode (PE) (Au/CeO2@FGCM-PE) was fabricated and employed for the voltammetric sensing of quercetin (QRT). The structure and surface morphology of Au/CeO2@FGCM were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Cyclic voltammetry (CV), square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) were employed for the investigation of the electrochemical behavior of Au/CeO2@FGCM-PE. Under the optimum conditions, the SWV oxidation peak current showed linear dependence on the QRT concentration in the range from 48 nM to 1.09 μM. The achieved limits of detection and quantitation were 0.37 nM and 1.22 nM, respectively. Au/CeO2@FGCM-PE was reproducible, sensitive and stable and displayed anti-interference ability for various common interferents. The proposed method was also successfully applied for real sample analysis. The QRT content extracted from natural sources was determined, and satisfactory results were achieved. Furthermore, the interaction of QRT with salmon testes and calf thymus dsDNA (st-DNA and ct-DNA) on Au/CeO2@FGCM-PE was studied by CV and SWV. The corresponding binding constant (K), surface concentration (Γ), and Gibbs free energy (ΔG°) were computed for the free QRT and the bound QRT-dsDNA complex. The calculated K values for the QRT-ct-DNA and QRT-st-DNA complexes were found to be 6.24 × 105 M-1 and 3.63 × 105 M-1, respectively, which revealed that QRT strongly interacted with ct-DNA compared to that with st-DNA. The decreased intensity of the QRT oxidation peak resulting from its interaction with dsDNA provides a chance to use QRT as a new indicator to analyze ct-DNA and st-DNA.

Magnetic Solid-Phase Extraction of Organic Compounds Based on Graphene Oxide Nanocomposites

Graphene oxide (GO) is a chemical compound with a form similar to graphene that consists of one-atom-thick two-dimensional layers of sp²-bonded carbon. Graphene oxide exhibits high hydrophilicity and dispersibility. Thus, it is difficult to be separated from aqueous solutions. Therefore, functionalization with magnetic nanoparticles is performed in order to prepare a magnetic GO nanocomposite that combines the sufficient adsorption capacity of graphene oxide and the convenience of magnetic separation. Moreover, the magnetic material can be further functionalized with different groups to prevent aggregation and extends its potential application. Until today, a plethora of magnetic GO hybrid materials have been synthesized and successfully employed for the magnetic solid-phase extraction of organic compounds from environmental, agricultural, biological, and food samples. The developed GO nanocomposites exhibit satisfactory stability in aqueous solutions, as well as sufficient surface area. Thus, they are considered as an alternative to conventional sorbents by enriching the analytical toolbox for the analysis of trace organic compounds.

Magnetic-Dispersive Solid Phase Extraction Based on Graphene Oxide-Fe3O4 Nanocomposites Followed by High Performance Liquid Chromatography-Fluorescence for the Preconcentration and Determination of Terazosin Hydrochloride in Human Plasma

In the present study, a facile modified impregnation method was employed to synthesize superparamagnetic graphene oxide-Fe3O4 (GO-Fe3O4) nanocomposites. Based on the GO-Fe3O4 as adsorbent, a simple and fast magnetic-dispersive solid phase extraction followed by high performance liquid chromatography with fluorescence detection (M-dSPE-HPLC-FL) method was established and validated for the preconcentration and determination of terazosin hydrochloride (TRZ) in human plasma samples. The obtained nanomaterials were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and vibrating sample magnetometry. Different parameters affecting the extraction efficiency, such as sample pH, amount of sorbent, extraction time, elution solvent and its volume and desorption time, were evaluated and optimized. The linearity of the proposed method was excellent over the range 0.3-50.0 ng mL-1 with an acceptable coefficient of determination (R2 = 0.9989). The limit of quantification and limit of detection were found to be 0.3 and 0.09 ng mL-1, respectively, and the preconcentration factor of 10 was achieved. Intra- and inter-day precision expressed as relative standard deviation (RSD %, n = 6) were between 2.2-3.8% and 4.7-6.4%, respectively. Accuracy, estimated by recovery assays, was 97.7-106.6% with RSD ≤ 5.2%. Ultimately, the applicability of the method was successfully confirmed by the extraction and determination of TRZ in human plasma samples.

Extraction and determination of flavonoids in fruit juices and vegetables using Fe3 O4 /SiO2 magnetic nanoparticles modified with mixed hemi/ad-micelle cetyltrimethylammonium bromide and high performance liquid chromatography

Extraction and determination of three flavonoids (morin, quercetin, and kaempferol) were performed by dispersive magnetic solid phase extraction based on mixed hemi/ad-micelles and high-performance liquid chromatography with UV detection. The Fe₃ O₄ /SiO₂ nanoparticles were synthesized and characterized by X-ray diffraction, FTIR, scanning electron microscopy, and thermogravimetric analysis. Fe₃ O₄ /SiO₂ nanoparticles coated with mixed hemi/ad-micelles cetyltrimethyl ammonium bromide was applied as a sorbent and used for extraction of flavonoids. Effective parameters on the extraction recovery such as amount of magnetic nano particles, volume of cetyltrimethyl ammonium bromide solution with specific concentration, pH of sample solution, adsorption equilibrium time, volume of desorption solvent, and desorption times were evaluated and optimized using fractional factorial design and central composite design. Under the optimum condition limit of detection and linearity were 0.83, 2.7-500.0 for morin, 0.18, 0.7-500.0 for quercetin and, 0.37, 1.3-500.0 µg/L for kaempferol. The extraction recovery with relative standard deviation were 97.88, 1.94 for morin, 95.77, 0.80 for quercetin, and 93.35, 1.45 for kaempferol. The proposed method was applied for simultaneous extraction and determination of flavonoids in several fruit juices and vegetable samples.

Cyclodextrin-based sorbents for solid phase extraction

Cyclodestrins (CDs) are cyclic oligosaccharides well-known for their ability to form host-guest inclusion complexes with properly sized compounds. They have been used for decades as chiral selectors as well as drug delivery systems within the frameworks of separation science and pharmaceutical science. More recently, their use has been extended to the field of extractive science under the stimulus of additional advantageous characteristics, such as low-price, negligible environmental impact, non-toxicity, as arising from the fact that natural CDs are starch degradation products. To abate their solubility in water and generate novel sorbents for solid phase extraction, the following approaches have been employed: (i) immobilization onto inert materials (silica, attapulgite, etc.); (ii) immobilization onto nanomaterials (magnetic nanoparticles, titanium oxide, carbon nanotubes, graphene oxide, etc.); (iii) polymerisation with specific cross-linkers to form the so-called CD-based nanosponges. Particularly promising are these last ones for their selectivity, mesoporous structure, insolubility in aqueous media and good dispersibility. This review offers a concise overview on the state of art and future prospects of CDs in this important sector of the analytical chemistry, offering a critical perspective of the most significant applications.

A nanocomposite fluorescent probe of polyaniline, graphene oxide and quantum dots incorporated into highly selective polymer for lomefloxacin detection

A nanocomposite fluorescent probe based on fluorescence quenching was fabricated and utilized for the detection of lomefloxacin. The fabricated probe integrated the high sensitivity of quantum dots, the excellent selectivity of molecularly imprinted polymer and the high adsorption affinity of graphene oxide and polyaniline. The probe exhibited good sensitivity, high specificity, and rapidity for lomefloxacin monitoring. Fluorescence emission was reduced linearly by lomefloxacin from 0.10 to 50.0 μg L^-1 and the probe exhibited a low limit of detection of 0.07 μg L^-1. The nanooptosensor successfully detected lomefloxacin in milk, chicken meat and egg samples. Recoveries were obtained in the range of 81.5-99.6% and the RSDs were below 7%. The results of this method agreed well with results of HPLC but provided higher sensitivity. This easily fabricated nanocomposite probe could be developed into a highly sensitive and selective optosensor to detect other organic compounds in various complex samples.

Applications of three-dimensional graphenes for preconcentration, extraction, and sorption of chemical species: a review

This review (with 115 refs) summarizes applications of 3-dimensional graphene (3DGs) and its derivatives in the fields of preconcentration, extraction, and sorption. Following an introduction into the field (including a definition of the materials treated here), the properties and synthetic strategies for 3DGs are described. The next section covers applications of 3DG-based adsorbents in solid phase extraction of organic species including drugs, phthalate esters, chlorophenols, aflatoxins, insecticides, and pesticides. Another section treats applications of 3DGs in solid phase microextraction of species such as polycyclic aromatic hydrocarbons, alcohols, and pesticides. We also describe how the efficiency of assays may be improved by using these materials as a sorbent. A final section covers conclusions and perspectives. Graphical abstract Graphical abstract contains poor quality and small text inside the artwork. Please do not re-use the file that we have rejected or attempt to increase its resolution and re-save. It is originally poor, therefore, increasing the resolution will not solve the quality problem. We suggest that you provide us the original format. We prefer replacement figures containing vector/editable objects rather than embedded images. Preferred file formats are eps, ai, tiff and pdf.Tiff file of graphical abstract was attached. Schematic presentation of synthesis of three-dimensional graphene (3DG) from two-dimensional graphene (2DG) with self-assembly, template-assisted and direct deposition methods. Application of 3DG-based nanoadsorbents in direct immersion-solid phase microextraction (DI-SPME), headspace-SPME (HS-SPME), magnetic-solid phase extraction (Magnetic-SPE), dispersive-SPE, and magnetic sheet-SPE.

A glassy carbon electrode modified with a copper tungstate and polyaniline nanocomposite for voltammetric determination of quercetin

A binary nanocomposite of type copper tungstate and polyaniline (CuWO₄@PANI) is described that was obtained by single step polymerization on the surface of a glassy carbon electrode (GCE). The resulting electrode is shown to be a viable tool for voltammetric sensing of quercetin (Qn) in blood, urine and certain food samples. The nanocomposite was characterized by UV-visible absorption spectroscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction and high-resolution transmission electron microscopy. Differential pulse voltammetry was applied to quantify Qn, typically at the relatively low working potential of 0.15 V (vs. Ag/AgCl). The modified GCE has a wide analytical range (0.001-0.500 μM) and a low detection limit (1.2 nM). The sensor is reproducible, selective and stable. This makes it suitable for determination of Qn in real samples without complicated sample pretreatment. Graphical abstract Schematic of a copper tungstate and polyaniline nanocomposite modified glassy carbon electrode for voltammetric determination of quercetin in real samples.

Magnetic graphene oxide nanocomposites as the adsorbent for extraction and pre-concentration of azo dyes in different food samples followed by high-performance liquid chromatography analysis

This work presents a method of magnetic solid-phase extraction (MSPE) combined with high-performance liquid chromatography (HPLC) to analyse five synthetic azo dyes (tartrazine, amaranth, carmine, sunset yellow, allura red) in different food samples. The magnetic graphene oxide nanocomposite (GO@Fe₃O₄) was prepared by a one-step solvothermal method and used as the sorbent for extraction and pre-concentration of azo dyes in food samples. The as-prepared GO@Fe₃O₄ nanocomposite was characterised by transmission electron microscope, Fourier transform-infrared spectroscopy, X-ray diffraction, vibrating sample magnetometer, and Brunuer-Emmett-Teller analysis. The extraction and desorption parameters were investigated, including the material amount, extraction time, pH of the solution, desorption temperature, and desorption solvents. Under the optimised conditions, the limits of detection (LODs) were 1.14-2.23, 0.36-0.77 and 0.68-1.26 ng/g for candy, jelly, and plum candy, respectively. The limits of quantification (LOQs) were 4.02-7.73, 1.21-2.50 and 2.31-4.20 ng/g for candy, jelly, and plum candy, respectively. For the analysis of spiked jelly, recoveries were between 73.2% and 107.7%, with RSDs lower than 1.34 %. The developed method was successfully applied to the analysis of real samples including jelly, candy and plum candy.

A method of detecting two tumor markers (p-hydroxybenzoic acid and p-cresol) in human urine using a porous magnetic <beta>-cyclodextrine polymer as solid phase extractant, an alternative for early gastric cancer diagnosis

Analyzing of tumor markers has become an important means for cancer diagnosis and prevention. In this study, a novel solid phase extraction based on porous magnetic cyclodextrin polymer (MA-CD) was developed and used for detection of trace small molecule gastric tumor markers in urine samples. The adsorption properties of the magnetic cyclodextrin polymer were tested. Through experiments of the solid phase extraction (SPE) at the different condition, the optimal condition was selected to test the two tumor markers by High-performance-liquid chromatography -Diode array detector (HPLC-DAD). The analytical performance of the method showed good accuracy (88.82%-104.34%) and precision (< 3.55%), appropriated detection limits (1.016 and 5.714 μg L^-1) and linear ranges (0.6-24.0 μg L^-1) with convenient determination coefficients (> 0.9994). The results demonstrated that the developed approach is efficient, low-cost for gastric tumor markers detection.

An ionic liquid-magnetic graphene composite for magnet dispersive solid-phase extraction of triazine herbicides in surface water followed by high performance liquid chromatography

A new ionic liquid-magnetic graphene (IL-MG) composite was used as the adsorbent in magnetic dispersive solid-phase extraction to rapidly extract and isolate triazine herbicides from surface water. IL-MG was synthesized by a simple and time-saving one-pot strategy where the synthesis of magnetic Fe₃O₄, the modification with an IL, and the reduction of graphene oxide to graphene were conducted at the same time. An IL was applied to enrich the interaction mechanism between IL-MG and analytes (π-π, hydrophobic interaction, and electrostatic interaction). Moreover, the IL and Fe₃O₄ nanoparticles acted as spacers, inserting between the layers of graphene to prevent the aggregation of graphene, which improved the adsorption ability because of the large specific surface area of IL-MG. The resultant IL-MG had hierarchical flake structures and showed a high adsorption capacity (8266.0-12 324.1 μg g^-1) toward triazine herbicides. Under suitable conditions, the linearity for triazine herbicides was achieved in the range of 0.55-500 ng mL^-1 with a detection limit of 0.09-0.15 ng mL^-1 and a quantitation limit of 0.31-0.51 ng mL^-1, and the enrichment factor was 83-fold, which indicated that the proposed method could be successfully applied for the determination of triazine herbicides in surface water.

Preferential adsorption of flavonoids from peanut shell by amino-modified Fe3 O4 nanoparticles (MNP-NH2 )

BACKGROUND

The highly selective capture of individual components of complex systems such as Chinese medicine extracts is a great challenge. With the rapid development of nanoscience, magnetic materials have attracted increased attention as suitable candidates for use in drug transport vehicles.

RESULTS

In this work, amino-modified Fe₃ O₄ nanoparticles (MNP-NH₂ ) have been synthesized and successfully used to selectively isolate luteolin, a type of flavonoid, from peanut shell, coupled with high-performance liquid chromatography. MNP-NH₂ were characterized by transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and vibrating sample magnetometer analysis, which showed that the amino functional groups were successfully bound to the surface of the magnetic particles. Adsorption of six different flavonoids by MNP-NH₂ showed that the mechanism of adsorption was related to the number of ortho-phenolic hydroxyl groups. The optimized adsorption conditions were extraction for 40 min at 30 °C by single-factor experiments and the final elution conditions were determined to be 5 mL of 20% glacial acetic acid (methanol:water = 60:40) and ultrasonication for 40 min by L9 (3⁴ ) orthogonal test.

CONCLUSION

Based on these findings, we first created a method for separating luteolin from peanut shell extract by MNP-NH₂ . This newly developed magnetic method of extracting chemical compounds from herbal foodstuffs and medicines provides new ideas for the utilization of a cash crop. © 2018 Society of Chemical Industry.

Contemporary enzyme based technologies for bioremediation: A review

The persistent disposal of xenobiotic compounds like insecticides, pesticides, fertilizers, plastics and other hydrocarbon containing substances is the major source of environmental pollution which needs to be eliminated. Many contemporary remediation methods such as physical, chemical and biological are currently being used, but they are not sufficient to clean the environment. The enzyme based bioremediation is an easy, quick, eco-friendly and socially acceptable approach used for the bioremediation of these recalcitrant xenobiotic compounds from the natural environment. Several microbial enzymes with bioremediation capability have been isolated and characterized from different natural sources, but less production of such enzymes is a limiting their further exploitation. The genetic engineering approach has the potential to get large amount of recombinant enzymes. Along with this, enzyme immobilization techniques can boost the half-life, stability and activity of enzymes at a significant level. Recently, nanozymes may offer the potential bioremediation ability towards a broad range of pollutants. In the present review, we have described a brief overview of the microbial enzymes, different enzymes techniques (genetic engineering and immobilization of enzymes) and nanozymes involved in bioremediation of toxic, carcinogenic and hazardous environmental pollutants.

Isolation, Separation, and Preconcentration of Biologically Active Compounds from Plant Matrices by Extraction Techniques

Development of efficient methods for isolation and separation of biologically active compounds remains an important challenge for researchers. Designing systems such as organomineral composite materials that allow extraction of a wide range of biologically active compounds, acting as broad-utility solid-phase extraction agents, remains an important and necessary task. Selective sorbents can be easily used for highly selective and reliable extraction of specific components present in complex matrices. Herein, state-of-the-art approaches for selective isolation, preconcentration, and separation of biologically active compounds from a range of matrices are discussed. Primary focus is given to novel extraction methods for some biologically active compounds including cyclic polyols, flavonoids, and oligosaccharides from plants. In addition, application of silica-, carbon-, and polymer-based solid-phase extraction adsorbents and membrane extraction for selective separation of these compounds is discussed. Potential separation process interactions are recommended; their understanding is of utmost importance for the creation of optimal conditions to extract biologically active compounds including those with estrogenic properties.