Graphene nanocomposite modified glassy carbon electrode for voltammetric determination of the antipsychotic quetiapine

Quetiapine Fumarate: A Review of Analytical Methods

Atypical antipsychotics are newer second-generation antipsychotics with weak dopamine type 2 blocking but potent 5-HT2 antagonistic activity. They are considered first-line treatments for schizophrenia and gradually replace typical antipsychotics. Extrapyramidal side effects are minimal, and they tend to improve impaired cognitive function in psychotics. Quetiapine fumarate is an atypical antipsychotic drug used to treat schizophrenia, mania and depression in people with bipolar disorder combined with other drugs or alone. Quetiapine was developed in 1985 and approved for medical use in the USA in 1997. Thorough computer-aided literature, surveys revealed that numerous analytical methods were reported over the years. The present study reviews analytical methods with their validation parameters published during the last 22 years (1999-2021) either as a single entity or combination in dosage form, and determination from biological samples. Novel strategies for increasing separation quality, such as QbD analysis and green spectroscopy, were discovered during the evaluation, and this review can be utilized for further research reference.

Construction of a hydrophobic-hydrophilic open-droplet microfluidic chemosensor towards colorimetric/spectrophotometric recognition of quetiapine fumarate: a cost-benefit method for biomedical analysis using a smartphone

Quetiapine fumarate (QF) is used to treat a number of mental/emotional diseases, including schizophrenia, bipolar disorder, and abrupt bouts of mania or depression linked to bipolar disorder. This antipsychotic medicine can be deadly if an overdose is given to a person. Therefore, the sensitive identification of QF in bodily fluids is very important. In this study, an innovative low-cost colorimetric chemosensor based on silver nanoprism transfiguration in a phosphate-buffered saline (PBS)/Cl^- matrix was developed and successfully tested for the recognition of QF in human-exhaled breath condensate. Using this non-invasive colorimetric chemosensor, a broad linearity range of 0.001-1000 μM and a low limit of quantification of 0.001 μM for QF were attained. Notably, the proposed optical chemosensor is capable of detecting QF from a minimum amount of sample [500 μM in PBS and 0.001 μM in exhaled breath condensate] in the first few seconds of reaction by the naked eye. So, a rapid colorimetric assay for the on-site analysis of QF was developed and validated. Moreover, for the first time, a semi-analytical method was introduced that can provide a rough estimation of the QF concentration. This colorimetric system was, for the first time, integrated in an optimized microfluidic paper-based colorimetric device (μPCD), promising the development of an engineered colorimetric opto-sensor toward real-time and therapeutic drug monitoring (TDM) assay of drugs in real-world samples.

Application of electrochemical sensors based on nanomaterials modifiers in the determination of antipsychotics

At present, the content of antipsychotics in samples is always analyzed by traditional detection methods, including mass spectrometry (MS), spectrophotometry, fluorescence, capillary electrophoresis (CE). However, conventional methods are cumbersome and complex, require a large sample volume, many pre-processing steps, long analysis cycles, expensive instruments, and need well-trained detection capabilities personnel. In addition, patients with schizophrenia require frequent and painful blood collection procedures, which adds additional treatment costs and time burdens. In view of these factors, electrochemical methods have become the most promising candidate technology for timely analysis due to their low cost, simple operation, excellent sensitivity and specificity. As we all know, nanomaterials play an extremely important role in electrochemical sensing applications. As the sensor modifiers, nanomaterials enable electrochemical analysis to overcome the time-consuming and labor-intensive shortcomings of traditional detection methods, and greatly reduce the research cost. Nanomaterials modified electrodes can be used as sensors to determine the concentration of antipsychotics in organisms quickly and accurately, which is a bright spot in the application of nanomaterials. The combination of different nanomaterials can even form a nanocomposite with a synergistic effect. This paper firstly reviews the application of nanomaterials-modified sensors on the basis of research in the past ten years, reviews the use of nanomaterial-modified sensors to quickly and accurately determine the concentration of antipsychotics in biological samples, and demonstrates a new idea of using nanomaterials sensors for drug monitoring and determination. At the end of this review, a brief overview is given of the limitations and the future prospects of nanomaterial sensors for the determination of antipsychotics concentrations.

Quantification of quetiapine fumarate based on electrochemical analysis by reduced graphene oxide modified nano-silica functionalized with polydopamine and gold nanostars: A novel pharmaceutical analysis strategy

Quetiapine fumarate (QF) is an antipsychotic drug that has been most widely prescribed as an antipsychotic. In this regard, sensitive recognition of QF in bodily fluids must be done accurately. In this work, an electrochemical sensor for QF detection was fabricated, using GNSs-PDA@SiO₂ modified rGO stabilized on glassy carbon electrode (GCE). According to the electrical nature of gold nanoparticles (GNPs), polydopamine (PDA), and its composition with nano-silica, the proposed hybrid material is able to enhance the electro-oxidation signals of QF towards its sensitive detection in complex biological media. The morphology of synthesized polymeric nanocomposites and various surfaces of electrodes were investigated using Field Emission Scanning Electron Microscopy (FESEM) and Energy-Dispersive X-Ray Spectroscopy (EDS) methods. Using the square wave voltammetry technique, the fabricated electrochemical sensor could detect QF in the linear range of 500 μM to 3 mM, which low limit of quantification (LLOQ) was obtained as 500 μM, indicating the sensor's appropriate sensitivity. For the first time, the application of novel hybrid material (GNSs-PDA@SiO₂ ) for pharmaceutical analysis in human plasma was studied using electrochemical sensor technology. Based on the obtained analytical results, engineered nano-surface led to entrapment and oxidation of QF in real samples. So, a novel and efficient method for the analysis of QF was designed and validated, which opens a new horizon for pharmaceutical analysis and Therapeutic Drug Monitoring (TDM).

Fully Integrated 3D-Printed Electronic Device for the On-Field Determination of Antipsychotic Drug Quetiapine

In this work, we developed a novel all-3D-printed device for the simple determination of quetiapine fumarate (QF) via voltammetric mode. The device was printed through a one-step process by a dual-extruder 3D printer and it features three thermoplastic electrodes (printed from a carbon black-loaded polylactic acid (PLA)) and an electrode holder printed from a non-conductive PLA filament. The integrated 3D-printed device can be printed on-field and it qualifies as a ready-to-use sensor, since it does not require any post-treatment (i.e., modification or activation) before use. The electrochemical parameters, which affect the performance of the sensor in QF determination, were optimized and, under the selected conditions, the quantification of QF was carried out in the concentration range of 5 × 10⁻⁷–80 × 10⁻⁷ mol × L⁻¹. The limit of detection was 2 × 10⁻⁹ mol × L⁻¹, which is lower than that of existing electrochemical QF sensors. The within-device and between-device reproducibility was 4.3% and 6.2% (at 50 × 10⁻⁷ mol × L⁻¹ QF level), respectively, demonstrating the satisfactory operational and fabrication reproducibility of the device. Finally, the device was successfully applied for the determination of QF in pharmaceutical tablets and in human urine, justifying its suitability for routine and on-site analysis.

Electrochemical determination of atypical antipsychotic drug quetiapine using nano-molecularly imprinted polymer modified carbon paste electrode

In this research, the advantages of molecularly imprinted polymer (MIP) materials have been used to develop a new electrochemical sensor for determination of quetiapine (QTP) drug. MIP nanoparticles were synthesized by precipitation polymerization method and used as QTP recognition elements in the composition of modified carbon paste electrode (CPE) for selective and sensitive assay of this drug. Cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques were used for electrochemical analysis. Some parameters affecting the sensor performance were optimized and under optimal conditions, the proposed sensor showed linear responses with QTP concentration in the range of 1.6 × 10^-8 to 2.5 × 10^-6 M (R² = 0.9964). The limits of detection (LOD) and quantification (LOQ) were calculated 5.04 × 10^-9 M and 1.68 × 10^-8 M respectively. Also, the amounts of %RSD for evaluation of repeatability and reproducibility of the proposed sensors were respectively obtained 2.19 and 3.02%. The method was successfully applied to determination of QTP in its pharmaceutical formulation and human urine samples.

Electroanalysis of Tricyclic Psychotropic Drugs using Modified Electrodes

Background:

Tricyclic psychotropic drugs are defined as a tricyclic rings of the dibenzazepine group with the presence of sulfur and nitrogen atoms. They have been prescribed for antidepressive therapy over the years. Due to their medical importance, many analytical methods have been developed for their monitoring. However, benefits of electrochemical techniques such as costeffectiveness, fast, easy operation and non-destructiveness make them appropriate analytical methods for drug assays. Electrochemical determinations of pharmaceuticals require suitable working electrodes. During years, many electrodes are modified by a variety of modifiers and several sensors were developed based on them. In this regard, nanomaterials, due to their remarkable properties, are one of the most important choices.

Objective:

Here, the application of electroanalytical methods in the determination of electroactive tricyclic psychotropic drugs will be reviewed and the nanomaterials which are used for improvements of the working electrodes will be considered.

Electrochemical Analysis of Antipsychotics

Introduction:

Schizophrenia is seizures accompanied by severe psychotic symptoms, and a steady state of continuation in the form of periods of stagnation. Antipsychotics are now the basis of treatment for schizophrenia and there is no other molecule that is antipsychotic priority in treatment. Antipsychotics can be classified into two groups; dopamine receptor antagonists such as promazine, fluphenazine etc. and serotonin-dopamine antagonists including risperidone, olanzapine, ziprasidone, aripiprazole etc.

Materials and Methods:

Electrochemical methods have been used for the determination of antipsychotic agent just as used in the determination of many drug agents. Nearly all of the antipsychotics are electroactive and can be analyzed by electrochemical methods. Electroanalytical methods offer generally high sensitivity, are compatible with modern techniques, have low cost, low requirements, and compact design. Among the most commonly used types, there are cyclic voltammetry, differential pulse voltammetry, square wave voltammetry and linear sweep voltammetry.

Conclusion:

The aim of this review is to evaluate the main line and the advantages and uses of electroanalytical methods that employed for the determination of antipsychotic medication agents used in schizophrenia. Moreover, applications of the methods to pharmaceutical analysis of Antipsychotics upto- date is also summarized in a table.

Voltammetric Analysis of Atypical Antipsychotic Drugs with Solid Electrodes

Background:

Qualitative and quantitative analysis of atypical antipsychotic drugs used for the treatment of schizophrenia, depression, anxiety, and bipolar disorder obtaining satisfactory results can be ensured by voltammetric techniques. The aim of this review is to present the application of voltammetric techniques developed for the determination of the atypical antipsychotic drugs, which are amisulpride, aripiprazole, clozapine, olanzapine, quetiapine fumarate, risperidone, sertindole, and ziprasidone, in pharmaceutical dosage forms and biological samples.

Methods:

Studies in the literature published between 2004 and 2017 based on the voltammetric determination of atypical antipsychotic drugs were gathered using scientific databases. The results obtained from these studies were combined and interpreted.

Results:

oltammetric techniques applied for the sensitive determination of trace amounts of the selected atypical antipsychotic drugs in their pharmaceutical dosage forms and biological fluids were compared. The best analysis conditions were obtained after the optimization of some parameters such as buffer type, pH, and scan rate. For diffusion controlled electrode processes, it was observed that differential pulse and square wave voltammetry methods were generally used for the sensitive quantitative determination of the drugs, whereas stripping methods were used for the adsorption controlled electrode processes. Detection limits were between 1.53×10-3 µM for clozapine and 0.97 µM for risperidone.

Conclusion:

The electrodes used in the studies showed high selectivity, sensitivity, and good accuracy with precision. The developed methods were also applied to pharmaceutical preparations of the drugs and biological fluids with satisfactory results, without any interference from inactive excipients.

Analysis of quetiapine in human plasma using fluorescence spectroscopy

A simple and sensitive spectrofluorimetric method has been development for the assurance of quetiapine fumarate (QTF). The proposed method was utilized for measuring the fluorescence intensity of the yellow fluorescent product at 510nm (λ_ex 470nm). The fluorescent product has resulted from the nucleophilic substitution reaction of QTF with 4-chloro-7-nitrobenzofurazane (NBD-Cl) in Mcllvaine buffer (pH7.0). The diverse variables influencing the development of the reaction product were deliberately changed and optimized. The linear concentration range of the proposed method was of 0.2-2.0μgml^-1.The limits of detection and quantitation were 0.05 and 0.17μgml^-1, respectively. The proposed method was applied for the assurance of QTF in its tablets without interference from basic excipients. In addition, the proposed method was used for in vitro analysis of the QTF in spiked human plasma, the percent mean recovery was (n=3) 98.82±1.484%.